The mail could not be sent to the recipients because of the mail server failure.

Hi,
I am configured Database Mail,But i am getting below error while i am sending Test mail.
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 4 (2014-03-10T15:54:11). Exception Message: Cannot send mails to mail server. (The SMTP server requires a secure connection or the client was
not authenticated. The server response was: 5.7.1 Client was not authenticated).
Pls help me,
Thanks - SelvaKumarSubramaniam.Please MARK AS ANSWER, if my answer is useful to U.

Hi Selvaons,
I would suggest you contact your mail administrator for assistance. Here are some good articles regarding how to configure database mail in SQL Server for your reference, please see:
http://blog.sqlauthority.com/2008/08/23/sql-server-2008-configure-database-mail-send-email-from-sql-database/
http://www.codeproject.com/Articles/29060/SQL-SERVER-Configure-Database-Mail-Send-Email
http://www.sqlservercentral.com/blogs/databaseexpertisecom/2010/05/12/database-mail-set-up-in-sql-server-2008/
Regards,
Elvis Long
TechNet Community Support

Similar Messages

Your workout data could not be sent...an Internet connection not available

(Also posted on the nikeplus forum: http://forums.nike.com/message.jspa?messageID=238734#238734)
I am trying to sync my workout data for the first time on iTunes....so far unsuccessfully.
I have just one workout in my latest workouts folder.
When trying to sync the iPod I get the following message:
"Your workout data could not be sent to nikeplus.com because an Internet connection is not available.
Make sure your network connection is active and try again."
There is also no button labeled "Visit nikeplus.com." below the "Automatically send workout data to nikeplus.com" checkbox in the Nike + iPod tab.
I am running the latest version of iTunes (8.0.2.20) on Windows XP and the latest firmware for my 1st gen iPod Nano (1.3.1). I am using just the basic Nike+ sport kit.
There is definitely no problem with my Internet connection. I can connect to the iTunes store. I have disabled my firewall to see if that was getting in the way. Nothing changed. Still the same message.
Does anyone have a solution for this please?

I contacted Apple support at 1-800-275-2273 for technical assistance. They sent me to level 2 support - product specialist for Ipod Nano with Nike+. They have not seen this issue before and they will need to contact me back, I should have an answer back by Thursday.

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not

Interesting db mail issue. If i click send test mail from sql mgmt studio, it works fine, but when i execute a SP to send a mail, it fails. One thing I noticed is that the "LastModified" column in the mail log shows the domain account when a test
mail was sent from mgmt studio, but show "sa" when the SP was used to send mail.
This is from SQL 2012, did not see this in sql 2008, looks like 2008 always used the service account. any ideas ?
Get this error:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not
Thanks.
Ranga

Hi Ranga,
I also use SQL Server 2012. I send a test email through SQL Server Management and the last modified By “sa”.
If you used stored procedure to send a test email. Please use the command below:
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Adventure Works Administrator',
@recipients = '[email protected]',
@body = 'The stored procedure finished successfully.',
@subject = 'Automated Success Message' ;
I can both send test email through SQL Server Management Studio and SP. Make sure you have the right profile. Since you could send test mail via SQL Server Management Studio, please try again to send it via SP.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].
In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
+ at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that.
But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
a new, unusual issue I have seen as well.
We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
up.
Thanks.

Hi,
You can refer to the following steps to rebuild an Offline Address Book.
1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
3. Start Outlook and download OAB.
What's more, here is an article for your reference.
How to Quickly Rebuild an Exchange 2010 Offline Address Book
http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I can no longer access Bejeweled Blitz through my facebook account. I get the message that says, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". Help please.

I can no longer access Bejeweled Blitz through facebook. I get the message, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". I can access Bejeweled through FB using my husband's log in so to me that suggests the problem is with my log in. Help please.

Contact FB or use another browser.

IMovieHD, "No disc burning drive found" and "The movie could not be sent.."

First post in these subject forums. I am posting the same problem in iDVD and iMovieHD which were from iLife'05, but I won't post there.
I loaded iLife'05 and also managed to get iDVD5 loaded although the packaging indicated that I needed to have a 733mhz G4 or faster processor and I have a Prismo Powerbook, 500 mhz and it was successful or maybe not.
Then I opened iDVD, I got this Error message..."The application iDVD could not be opened because the required hardware could not be found"...which makes sense as I have an external Lacie (CD-R,-RW, DVD-R,-RAM,-RW,R,+RW,R DL) burner that I bought about a year ago that my wife also uses on her G4 tower.......... and I did not have it connected. So I connected it and when I opened iDVD again and it still reads: "The application iDVD could not be opened because the required hardware could not be found." Shut down and reboot, no difference.
This probably does not have any bearing on the issue but in the System Profiler for "Disk Burning" there is a parameter "Burn Support" which is "Yes (Unsupported)", should this be "Yes (supported)"?
Question #1: Does iDVD5 only work with an Apple "superdrive" or does it work with other third party "DVD burners" ?
So I used iMovieHD from iLife'05 to create a project of an old family vacation (from an old 8mm Sony Handycam) and wanted to create a DVD, for archive reasons and to view on TV with a DVD player, but I could not do anything because of different errors now in iMovieHD.
File > Share...(a window opens and I choose iDVD and then click the "share" button) and this error comes up:
The movie could not be sent to iDVD, because of an unknown error.
"Please make sure that iDVD is properly installed, that your project disk has write permission, and that you have enough disk space. (Error 0)"
Next I tried: File > Burn Project to Disc......and this error comes up.
No Disc Burning Drive Found
"If you have an apple-supported disc burner, please check your connections and try again."
The project file is 5.89GB and I have 57.97GB free on the hard drive so I don't think that space on the hard drive is an issue.
Question #2: Is the issue of not being able to create a DVD from iMovieHD related to the iDVD issue although the error messages in iMovieHD and iDVD are different?
Question #3: How are Video DVD's from the Hollywood Studios able to make DVD's longer than 2 hours?
Thanks all for your help in advance. John

One more addition to this post, I opened DVD Player and got this error "There was an initialization error. A valid DVD drive could not be found (-70012)
Maybe this will help give someone a clue.

When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
WGC

What's the name of the file you are attempting to open? Is it "ScreenFlow_4.5.2.dmg"? If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension. Adobe Reader opens PDF files an not any other file type.

"The movie could not be sent to QT, because a file couldn't be found"

When I try to export a 2 1/2 min. iMovie video I made today in pretty much any format, I get the following:
"The movie could not be sent to QuickTime, because a file couldn't be found.
Please make sure that your project disk has write permission, and that you ahve enough disk space. This error can also be caused by some third-party iMovie HD plugins" then tells me what to do if I have said plug-ins. I have no plugins for iMovie.
The flash drive I'm attempting to save to has almost 80mb of available space. Also, something /does/ get saved on my drive, but the (Windows) computer I try to transfer it to won't recognize it and my MacBook's QuickTime refuses to play it.
What is going on?

Welcome to iMovie Discussions.
iMovie - and other Mac programs - prefer (..or need!..) to have any discs, or other devices on which you're saving movie files, to be formatted as 'Mac OS Extended'.
That's different from the (generally) FAT32 format which Windows PCs use. And although Macs can read Windows-formatted discs - so your MacBook can read what's on your Windows-formatted flash disc - Windows machines generally cannot read Mac-formatted discs, so, er, you'd have a problem or two if you want to use any Mac-formatted device with a Windows machine!
Your flash drive - and anything else on which you've saved your 2.5 minute iMovie video - would need to be formatted as 'Mac OS Extended' if you want to use it for iMovie editing ..but you should be able to store a 'self-contained' QuickTime movie on it perfectly well in its PC-formatted state, and that movie should play in Windows when you plug it into a Windows machine if you have the latest Windows version of QuickTime on the Windows PC.
So maybe you exported your iMovie to QuickTime, onto the flash disc, but not as a self-contained movie. If it IS self-contained, then the complete movie would be there, and it's pretty much guaranteed to play. But if you didn't tick the 'self-contained' check-box, then all that gets saved is a very small file (called a "reference file") with a set of "pointers" to what's in the original iMovie project. In other words, you've saved only the details of how to play the movie, without actually saving the actual video file(s), which remain on your MacBook, instead of being on the flash disc.

2012 R2 Fax Server -- "The Message could not be sent. The wait operation timed out."

I receive the following error on a newly installed 2012 R2 fax server when sending from the Windows Fax and Scan console:
"The Message could not be sent. The wait operation timed out."
The test fax that fails only contains text that I type into the body. However, if I add an attachment, the fax is successful.
Any ideas??

Hi,
Would you please let me confirm whether install any third-party application on the Windows Server 2012 R2?
Please perform a clean boot to eliminate software conflicts and monitor the result. Please also check if you install all necessary updates on the server.
Meanwhile, please run
sfc /scannow command to scan all protected system files and check if find issues.
Please also refer to following article and check if can help you.
Troubleshooting Your Fax Server
By the way, there is a similar thread. Please also refer to following thread and check if can help you.
Windows
Fax and scan (Windows 8)
Hope this helps.
Best regards,
Justin Gu

Your workout data could not be sent to nike+ because the data could not be

i have been getting this message while uploading data in itunes after using a cybex arc elliptical machine.
"your workout data could not be sent to nike+ because the data could not be validated by our server."
anybody else have this problem and/or solution?

Hello balbew,
It looks like you haven't been the only one recently.
http://forums.nike.com/thread.jspa?messageID=330025
Try waiting another day or two or trying at a later time to see if that makes a difference. It could very well be a server side error.
B-rock

The movie could not be sent to idvd because of an unknown er

The movie could not be sent to idvd, because of an unknown error.
I'm puzzled on this one I have created a movie from DV clips, the total movie length is 27 mins and I have 37gb of space left on the external drive, where the movie is stored.
Does anyone have any further information to resolve this?
Many Thanks
Matt

Hi Karsten, actually I did try moving it to the "Movies" folder on the internal drive, but still received the same error message. Right know we're having to export the movie back on a mini-DV tape and then reimport it back into iMovie as a new import in order to burn a DVD, but this means that we won't be able to edit the transitions, text, etc. in the future. We haven't had this specific problem before. I even tried pulling up another iMovie file on the external HD just as a test and had no problems in exporting it to iDVD, so it's something with this particular iMovie file that is causing the trouble. It's very frustrating! Any more suggestions would be most welcome!
Thanks,
Steve

"The movie could not be sent to QuickTime"

I am unable to export from iMovie as a QuickTime movie because when I attempt to "Share" an iMovie project as a QuickTime movie, at the very end of the data compression process, the export is cancelled and this message appears:
"The movie could not be sent to QuickTime, because of an unknown error. Please make sure your project disk has write permission, and that you have enough disk space. (Error: -50)"
I do have both write permission and loads of disk space. Your help greatly appreciated. I have iMovie 5.0.2 and QuickTime 7.0.4.
15" Aluminum Powerbook 1.67 GHz Mac OS X (10.4.5) iMovie 5.0.2, QuickTime 7.0.4
15" Aluminum Powerbook 1.67 GHz Mac OS X (10.4.5)

I'm having the same problem, with tons of disk space and write permission. In my case, it happens when I try to save the movie to an external drive, and the problem is resolved when I save it to the startup drive.
If someone has a better solution, I'm all ears...
MacBook Pro Mac OS X (10.4.6)

?? "The movie could not be sent to Quicktime because a file couldn't be..."

trying to export a movie in iMovie HD - and that's what it says:
"The movie could not be sent to Quicktime because a file couldn't be found" then it says to rename the folder called "iMovie" in the library to "iMovie0", restart and press on.
then .... "Visit http://support.apple.com/ for more information on this issue."
ok. where on support?
anyone have any ideas on this? I have installed iLife08 - is this the issue?
tia.

Thanks for the reply. I hadn't thought about that - but it IS an external and it is not OSX extended. I exported to my internal drive and all worked well. wonderful! problem solved - I'd never noticed that before, and I was sure I'd exported to that drive before. so, I tried again - presto it worked - I exported it to the external. so... the error message that came the first time went away.
.... strange
but ... solved?
thanks again,
f

This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000]

Software: Microsoft Office 2007 Professional Plus
Service: Microsoft Office 365 - Cloud Hosted
Hello,
I have a user who receives this error when trying to send a calendar invite to her coworkers (names have been changed for privacy):
The following recipient(s) cannot be reached:
Megan Bennis on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Charity Lurk on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Susan Parker on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
All three of these users are in her address book, and are all in her office residing on the same Office 365 domain account.
I have tried the troubleshooting methods outlined in this article, but they did not resolve the issue: http://theitbros.com/office-365-this-message-could-not-be-sent-try-sending-the-message-again-later/
- This entailed manually downloading/updating the address book via 'Send/Receive --> Download Address Book...'. The second method in that article had me rename/move/delete the Address Book files stored on the local machine, and then allow them to
repopulate when you open Outlook again. This also did not resolve my issue.
Any ideas? Thanks in advance!

That's the kind of message you will see when trying to send on behalf of/send as another user, when you don't have the necessary permissions added. Or you are using the wrong send method, or using an outdated name cache entry, or the OAB is outdated.

The mail could not be sent to the recipients because of the mail server failure.

Similar Messages

Maybe you are looking for