There used to be a grey progress bar on youtube videos on Firefox, which doesn't come anymore.; it shows up on IE though; how can I fix it in Firefox?

Youtube videos on Firefox do not buffer anymore.

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Similar Messages

  • When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?

    When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?

    Did you reset your iPad like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.

  • There are sites like Amazon, Facebook and pages where I need to put info on that don't totally show all the points. How can I get them to show up? I usually have to guess

    There are sites like Amazon, Facebook and pages where I need to put info like name, address, etc, that don't show where 'next' or 'skip' or 'continue' are. There is just alot of space. When I move my cursor around I have to guess if it's the right one and click

    For some ways around this see [http://kb.mozillazine.org/User_name_and_password_not_remembered User name and password not remembered - MozillaZine Knowledge Base]
    Another option is the [https://addons.mozilla.org/en-US/firefox/addon/60265/ Saved Password Editor] add-oin which allows you to add passwords for sites that disable password saving.

  • After updating to ios 7, I am now asked to enter my password continuously when using outlook web access for my work emails. This didn't happen before, I only had to enter my password once. How can I fix this?

    After updating to ios 7, I am now asked to enter my password continuously when accessing my emails on outlook web access. Before I just had to log in and I was able to reply, save emails, etc without re entering my password. How do I fix this?

    Similar thing is happening to a relative.
    He upgraded his iPhone 5 and lost his iCloud account and all his email accounts. Major pain in the neck for a senior. And it was not a user error...unless you count the fact that he hit the upgrade button.

  • Grey progress bar on boot

    My Mac Pro restarted several time last night due to power outages during a storm.
    Now when I boot it there is a progess bar under the spining wheel on bootup.
    Boot process takes longer then usual as well.
    How can I fix this?

    Almost seems like it is stuck in a loop of starting to Safe Boot. Try resetting the PRAM and SMC.
    Resetting SMC: http://support.apple.com/kb/HT3964
    Resetting PRAMhttp://support.apple.com/kb/HT1379?viewlocale=en_US:

  • When I turned on my ipad the screen is scrolling grey and white veritcal lines. I can't power it off. How can I fix this?

    When I turned on my ipad the screen is scrolling grey and white veritcal lines. I turned on the ipad and plugged it up, when I touched the button on the bottom, it flashed as if the screen was coming up, but instead it scrolled grey and white lines, halfway across the screen and has been doing so for about an hour now. How can I fix this? I need it for school. Am I going to have to send it back? And if so, will they send me a replacement while I am waiting for mines to be fixed?

    Janellie_love-
    You might connect the iPad to its wall charger for half an hour, to be sure there is enough juice to get started.
    That sounds like an internal problem, as you suspect.  If you can show it to an Apple Store Genius, you may get a replacement on the spot.
    If there is no Apple Store near you, look for an Apple Authorized Repair Center.  There may be one in your city.  I do not know how long it would take, or if a "loaner" would be available.  Whether they can fix it on site would depend on what the problem is.  <Apple Authorized Repair Centers>
    One thing you can try is to reset (reboot) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  If it works, the iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred

  • My IPad Retnia does not charge when plugged in using the USB from my computer to car adapter, how can I fix this to be able to have flexibility in charging?

    When I plug me IPad into the USB connector to my laptop or into my car charger, it show as not charging. How can I fix this so that I can charge my Pad in these settings?

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    And this - Unplug the charger from the iPad and then replug. May resume charging.
    Or - Recalibrate the battery. See link below.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Grey progress bar when booting up loop

    When I boot up my computer, the grey progress bar below the apple logo appears. It gets to the very end of the bar and then my computer shuts off. When I turn it on again, the same thing happens. Is there any way to fix this?

    Windows doesnt do the same system checks that OS X does, so thats why you wont get the issue witthin Windows.
    After you replace the drive, you should be able to put it in an enclosure and then migrate the data over to the new drive. 
    As far as your Windows partition. You may be able to use Winclone (www.twocanoes.com) to image and restore it. I don't know if it will work though when the drive is connected externally.

  • Macbook Pro get grey progress bar and shuts down

    Hello All,
    I have a macbook pro and I faced this issue out of nowhere. After shutting down the system last time, when I started the system, I could hear the apple chime, apple logo appeared with grey progress bar below it. The bar will progress to 1/3 or so and it will disappear and after few seconds laptop will shut down. I tried few times but same things was happening again and again.
    After going through few support forums, I booted by pressing D to run the Apple hardware test. It wouldn't do anything at all. Apple hardware test was stuck at pass number: 1 with elapsed time of 7 seconds. All retry were the same as the first one.
    I rebooted the laptop and pressed command + R and entered in  recovery mode/recovery disk. I clicked on Disk utility and select Macintosh HDD and started disk verification. I got hundreds of errors/warning, saying Missing thread recode (id = XXXXXXX) and it suggested to repair the disk. I tried to repair the disk but after similar message, pop window appeared with message that disk cant be repaired. I exited out of it and went back to recovery menu.
    I selected Reinstall OS X Mountain Lion and went through steps and at the point where I have to select my HDD, there was just one option and I couldn't select it. It gave message that This HDD is locked. I can't start in safe mode, and can't reinstall OS X
    I believe this is because of my hard drive might have crashed. can anyone help?
    Thank you,

    It does sound like your having mechanical or other issues with your boot drive.
    If your machine is under AppleCare or warranty you can take it to them.
    If you can user service your machine, you can opt to try to see if a new drive will work and install it yourself, or have a local geek do it for you.

  • After waking from sleep, my Macbook Pro shows grey progress bar

    I have the mid 2012 Macbook Pro (13 inch). When I leave it open and let it fall asleep after the time I have chose, it wakes up again fine.
    But if I choose the sleep from the Apple in the menu bar or SHUT the lid, when I wake it up, it shows the grey progress bars and takes about 3-4 minutes before it is responsive again.
    Any advice? I'd just like it to sleep normally. It's a bit embarrassing to have to wait that long if I'm trying to show off how cool my laptop is
    Here are the specs, copied from my System Information:
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro9,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.9 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          4 MB
      Memory:          8 GB
      Boot ROM Version:          MBP91.00D3.B08
      SMC Version (system):          2.2f41
      Serial Number (system):          C2QJF09CF5WW
      Hardware UUID:          494AC457-6424-55C1-ACC3-61DDC76AA035
      Sudden Motion Sensor:
      State:          Enabled
    Thanks for any help!

    This was added to all 2012 model MBPs as part of some bs Euro power saving standard.  By default, when on AC power, the system has to sleep for 14400 seconds before this deeper hibernation state happens.  When that happens, the system takes a while to resume to normal operation.  There is a workaround for this and it is available on this site, but I urge you to call AppleCare and complain about this issue yourself please because without a lot of complaints about it, Apple won't fix it.  The workaround is to simply issue a command in a Terminal prompt that disables this option from happening, but it's not a fix by any means.

  • TS3148 A grey progress bar will appear and will load for a little bit and will shut off, what do I do?

    On my Mac book pro, a grey progress bar will appear for a
    Little bit and the computer will shut down.
    What do I do?

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Problem using a Flash MX 2004 Progress Bar Component within a Movieclip

    I'm try to setup a progress bar to show the percentage loaded
    of a mp3 audio file using the Flash MX 2004 Progress bar component.
    I can get the progress bar to the work normally by the having the
    component on the stage (not in a movie clip) with the component set
    to:
    mode: polled
    source loader
    with the following actionscript on the layer above:
    pBar.setStyle("themeColor", 0xFF0000);
    var loader:Object = new Sound();
    loader.loadSound("http:/www.mywebsite.co.uk/mymp3.mp3",
    true);
    But I won't to put the preloader inside a Movie Clip (the
    movie clip is called 'content_MC') as the website has alot of
    content. When I do this the mp3 file still streams but the Progress
    Bar doesn't work.
    I think I just need to change the action script so that it
    links with the component telling it to calculate the progress of
    the audio streaming file.
    Am I right? Where am I going wrong?

    I found the problem!!
    While exploring the Fireworks MX 2004 folder located under
    "C:\Documents and Settings\USER\Application Data\Macromedia\"
    folder I discovered that this folder was empty. So, I connected the
    old hard drive and investigated the contents of the corresponding
    folder on that drive. Discovering the wide assortment of files and
    folders in that folder, I simply copied the contents of that folder
    to the Fireworks MX 2004 folder and retried running the application
    and IT WORKED!
    Thanks for all your communications and in depth
    troubleshooting steps, I will keep them in may Application
    troubleshooting Tool Tips for future reference. I have included the
    actions used here which brought about the successful resolution of
    this issue so that if you'd like you might include them in any Help
    Desk Methods you may have. It was truly a collaborative effort
    because I would not have thought to explore the Application Data
    folder to resolve this issue without you pointing me in that
    direction.
    Thanks again!

  • Im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

    im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

    Have you worked through the Troubleshooting iOS and WiFi knowledge base article?  If not, see if there is info in there that might help.
    Is the WiFi greyed out on all WiFi networks or just the one?  If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
    Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.  That clears a lot of iOS hang ups that occur.

  • When im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.

    when im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.

    You must have a valid form of payment for the app store in the country you are using. Most app stores are separate legal entities to comply with local laws. It is possible to have an account without a credit card, however; see: http://support.apple.com/kb/HT2534

  • Hi there. I shot with a nikon d7000. The clips look great on the viewer but quite bad on canvas (also after its been exported) I converted my clips to apple pro res 422 using mpeg streamclip. The size I used was 1920 x 1080. How can I fix these?

    Hi there. I shot with a nikon d7000. The clips look great on the viewer but quite bad on canvas (also after its been exported) I converted my clips to apple pro res 422 using mpeg streamclip. The size I used was 1920 x 1080. How can I fix this?

    This is the clip:
    This is the sequence:
    I know they both should match. Question is, should I re convert the clips in mpeg using different size settings? Or should I change the sequence settings? how?
    Thanks A LOT.

Maybe you are looking for

  • New to iCloud and need help please with getting it working

    I've got an iPad 2 and an iPhone 5 and have decided that it's about time to set up iCloud on my devices. I have followed the instructions on the website and in the icloud settings on both devices have switched on mail, contacts, calendars, reminders,

  • Leaked Data Price?

    I was just looking at engadget and saw this post: http://www.engadget.com/2011/01/24/verizon-tweaking-low-end-data-plans-using-3g-distinction-to-u/ It says that Verizon will require everyone to have the $30 unlimited plan and that they may be getting

  • Problem in Forms Step in Workflow....

    Hi Gurus,,,,, I have created a simple workflow using a container element a form step and a mail step. The action for the Form is Approve . I have made 1 field as  input and all others as output only and written the code inside the flow logic. When ex

  • Compliance Management in B2B

    Hi, can anyone help in how we can answer for Compliance Management in B2B

  • [Solved] Unable to build lensfun-svn

    Hi there! I'm trying to build lensfun-svn from the AUR, but it fails. Error: Checking for GNU Make >= 3.81 ...4.0 < 3.81, FAILED GNU Make version 3.81 and above is required to build this project This is the PKGBUILD I'm using: pkgname=lensfun-svn _sv