ThinkVantage Toolbox error message remains

I had a HDD error 3 months ago, thus changed the HDD and mirrored all data to it (including the files that had been in bad sectors). The next time I started the Toolbox System Check, it got a HDD error again. So I ran checkdisk and afterwards the toolbox again and everything went fine since then. I rechecked several times since then, no more problems appeared.
However, the Toolbox keeps showing me error notifications because this one test 3 months ago went wrong, even though everything is fine since then. Anyone an idea how to fix it?

Kindly uninstall the ThinkVantage Toolbox and reinstall it.
The issue will resolve.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

How do I stop the Lenovo ThinkVantage Toolbox update message from popping up?

There are times when I am streaming video, and do not want pop up messages showing on the screen. I do not like pop ups. There seems to be no way to turn off Lenovo ThinkVantage Toolbox update messages from popping up on the screen. If I could turn the pop ups off, i would. I am running Windows XP - Pro.

Download and install MS Autoruns:
http://technet.microsoft.com/en-us/sysinternals/bb963902
Before you run Autoruns, in explorer, get properties on the chm help file and click the Unblock button if visible.
Otherwise you may be unable to use the help file.
Now run Autoruns. Find all likely references to Thinkvantage Toolbox (PC Doctor) and disable (uncheck checkbox).
You don't have to remove the references, just disable them. You can re-enable them later if you like.
Save and restart computer. Poof! No more Thinkvantage Toolbox popups. You will now need to run it manually.
Ian

ThinkVantage Toolbox - Error when opening

I took the ThinkVantage Toolbox update per the recommendation -- now, the Toolbox icon shows up in my toolbar -- but when I try to actually run the toolbox program, I get the system error message: Lenovo ThinkVantage Toolbox has stopped working.
The toolbox program continues to operate behind the error dialog box until I click on the "close program" button.
I can't fathom what is making it report that it has stopped working -- any ideas?
Thanks in advance.
Joseph
Solved!
Go to Solution.

BTW, Not absolutely sure if it's directly related, but the application log in event viewer has this entry:
Log Name:      Application
Source:        SideBySide
Date:          11/24/2009 11:12:29 PM
Event ID:      72
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      JosephChiu-T500
Description:
Activation context generation failed for "C:\Program Files\Lenovo\Mobile Broadband Connect\DetwanHw.exe".Error in manifest or policy file "C:\Program Files\Lenovo\Mobile Broadband Connect\DetwanHw.exe" on line 9. The element trustinfo appears as a child of element urn:schemas-microsoft-com:asm.v1^assembly which is not supported by this version of Windows.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider />
    <EventID Qualifiers="49409">72</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-11-25T07:12:29.000Z" />
    <EventRecordID>11463</EventRecordID>
    <Channel>Application</Channel>
    <Computer>JosephChiu-T500</Computer>
    <Security />
</System>
<EventData>
    <Data>trustinfo</Data>
    <Data>urn:schemas-microsoft-com:asm.v1^assembly</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>C:\Program Files\Lenovo\Mobile Broadband Connect\DetwanHw.exe</Data>
    <Data>C:\Program Files\Lenovo\Mobile Broadband Connect\DetwanHw.exe</Data>
    <Data>9</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>

Thinkvantage Toolbox Error on Edge 11

Whenever I activate Thinkvantage Toolbox to check system status of my EDGE 11, the error message always appears on my screen saying " DEVICE DISCOVERY ERROR, YOUR SYSTEM WAS BUSY PERFORMING OTHER TASKS WHEN ATTEMPTING TO COLLECT INFORMATION. IF THERE IS AN ERROR, RESTART APPLICATION OR IF PROBLEMS PERSIST, RESTART SYSTEM".
FYI my ThinkVantage Toolbox is currently version 6.0.5717.37 sitting on Win 7 Home basic OS.
can anyone assist to solve this problem? thanks
Moderator note; subject edited

BTW, Not absolutely sure if it's directly related, but the application log in event viewer has this entry:
Log Name:      Application
Source:        SideBySide
Date:          11/24/2009 11:12:29 PM
Event ID:      72
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      JosephChiu-T500
Description:
Activation context generation failed for "C:\Program Files\Lenovo\Mobile Broadband Connect\DetwanHw.exe".Error in manifest or policy file "C:\Program Files\Lenovo\Mobile Broadband Connect\DetwanHw.exe" on line 9. The element trustinfo appears as a child of element urn:schemas-microsoft-com:asm.v1^assembly which is not supported by this version of Windows.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider />
    <EventID Qualifiers="49409">72</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-11-25T07:12:29.000Z" />
    <EventRecordID>11463</EventRecordID>
    <Channel>Application</Channel>
    <Computer>JosephChiu-T500</Computer>
    <Security />
</System>
<EventData>
    <Data>trustinfo</Data>
    <Data>urn:schemas-microsoft-com:asm.v1^assembly</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>C:\Program Files\Lenovo\Mobile Broadband Connect\DetwanHw.exe</Data>
    <Data>C:\Program Files\Lenovo\Mobile Broadband Connect\DetwanHw.exe</Data>
    <Data>9</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>

Thinkvantage toolbox errors unter W7

Hi,
since last update of thinkvantage toolbox on my T400s i cant run the sw, after every attempt toolbox at first loadsup and start check then it fail with errror and shutsdown
I have W7 pro 32bit and thinkpad T400s type 2809-D9G
here is eventlog:
System
Provider
[ Name]
PC-Doctor
EventID
1
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2011-07-31T15:38:14.000000000Z
EventRecordID
54430
Channel
Application
Computer
PC
Security
EventData
(3092) Asapi: (17:38:14:8400)(3092) S3LogPusherPlugin.Helper - Error -- 340 Unable to storage the test log to medium

hey Aluzcz
Curious to know is your TVT at version 6.0.5802.24 ? If it is not, do update.
if it is, kindly uninstall. set msconfig to diagnostic startup and install in this manner. set back to normal startup and test again.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Toolbox Error Message

After TV Toolbox has checked my system and declared that there are no problems, it pops up a message box saying:
Error
An error occured while processing the scriplet
eedf7e8-5a1b-468c-a8f0-e55ee3750d096. The error was: "object doesn't support
this property or method"
Today it updated to version 6.0.5450.12 but it still pops up the same message.
Anyone got any suggestions about what to look for?
W500 40623CG upgraded to Win7 x64 (works brilliantly.)
Eric
Solved!
Go to Solution.

Doh!!!
I ran system update and it decided to update Toolbox again as well as adding a few other updates. It still claims to be version 6.0.5450.12, but my error box has gone away.
Eric

Error message "iTunes has detected an iPod that appears to be corrupted"

Everything used to work just fine until recently. On my Windows XP Home SP3 laptop, with iTunes (version 9.0.2.25) already open, I connect my 5th Generation iPod Nano and get the following message in iTunes:
"iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
If I plug the iPod into the computer without first starting iTunes, the Windows ‘Auto Play’ message comes up immediately then disappears and then the following message appears:
"Your iPod needs to be formatted for use with Windows. Would you like to run iTunes to restore your iPod Now?"
Otherwise, the iPod functions normally when not connected in iTunes. I can play the music, videos, and record videos with no problems.
The troubleshooting steps I took were:
I performed a reset of the Nano by first sliding the hold switch on/off a few cycles, leaving switch off (no orange showing), then pressed and held the Menu + Select button until the Apple logo appeared. Then I tried it in iTunes again; no such luck, same error. I then did a reset again, this time with the iPod connected to an AC power source; still no luck. I tried the reset numerous times and it didn’t help.
Next, I ran the diagnostics by pressing and holding the Menu + Select buttons immediately followed by the Select + Reverse buttons. I stepped through all the diagnostics tests and all tests passed as far as I could tell (there was no errors reported).
After this, I tried it in iTunes again and still no luck.
I even tried the iPod on my Windows Vista Home Premium (32 bit) machine and it behaved the same way. The version of iTunes on that machine was at an earlier version when I first tried it there. I then upgraded iTunes to the latest version but that didn’t help either.
I can sync my iPod Touch and 2nd gen Nano without any problems.
Sorry about be long winded about this but I am wondering if anyone else may have other suggestions. I want to try and avoid a restore if possible because I have some videos I recorded that I would like to get off the iPod. I’m not concerned about my music files as I have them always backed up but didn’t get the videos off yet.

I am having this same problem with my brand new Mac Pro. It seems to be tied to the computer awaking from sleep (no I am not leaving the iPod connected while sleep... I am referring to waking the computer from sleep and then connecting iPod as opposed to restarting the computer and then connecting the iPod). In other words, if you are getting this error message, try ejecting the iPod, restart your computer, then connect the iPod and see if the error message goes away. For me it does, but I only get one shot at it, if I eject the iPod and then reconnect it, the error message returns. This happens on both iPods I have. I have rebooted (hold menu-select) and gone to disc mode (hold select-play) and the error message remains. The only way it goes away is to reboot the computer, then I get one shot at hooking up an iPod.
I NEVER had nor get this error message when I connect to the Windows PC that I started with. Perhaps the iPod does not like moving from PC to Mac?

Error Message: Number is not in external Interval (Testing Schedule)

Hii ,
Iam working on Stability study process. I have maintained stabity test with materiial (QS) & performed my test upto Initial test of Inspection lot. But when i click create Testing Scheudle in the Notification (QM02) , system asks for testing schedule data for
Maintenane strategy, scheduling period.
On clciking create testing schedule , system throws error message "Number is not in external interval". I have maintained all the prerequite setting on number range in following spro path stability study>testing schedule for stability study> Category--> no range.
For Group ST 600000000- 6999999999 for Intenal & 70000000-7999999999 for external. But still iam facing with error message ""Number is not in external interval". It throws message no "IP324" . Even I had cross checked with maintenance setting, but error message remains . How to resolve this issue?
with regards,
K.Lokesh.
Edited by: Lokesh K on Mar 11, 2010 1:13 PM
Edited by: Lokesh K on Mar 12, 2010 5:55 AM

Hi Lokesh,
did you actually enter a number ( i.e. 70000001)?
Usually Stability studies are created using the external number range so that ringing names can be used for the studies:
Example:
Material: 000000000000000001 acetylsalicylic acid
Stability study: ASA1
I hope that this information proves usefull.
Regards
Isabelle

The instruction at 0x100072b8 referenced memory at same could not be read-error message always appears at startup and cannot be eliminated.

firefox.exe - Application Error
The instruction at 0x100072b8 referenced memory at 0x100072b8. The memory could not be read.
Click on OK to terminate the program
Click on CANCEL to debug the program
Either of the above options terminates Mozilla - neither option fixes the problem - however Mozilla works as long as the error message remains on the desktop.

We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
Mylenium

IPad with retina is stuck on error message that iPad is unable to back up. When hit ok, the message does not go away. Cannot power down. Don't have computer to sync with iTunes. Now what?

My coworker has a fairly new iPad with retina display. She has an error message that the iPad has not been backed up and needs to back up when locked, on wifi, and connected to a power supply. It has an ok button to acknowledge the message. Every time she hits the ok button, the error message remains. She is unable to power down because the error message stays at the top and disables the ability to use any other touch portions of the screen. She tried using Siri to reboot, but Siri was of no help. She just kept saying that she does not wear boots. Holding the power button down for an extended period also did not help. She does not have access to the computer that has her iTunes on it, so she cannot sync it via cable. She also does not want to do a reset because she has several photos that she does not want to lose. What can she do?

Try holding the Home and Power keys at the same time for approx 10 seconds or until the Apple logo appears, this will 'reset' the device - it won't lose any data doing this, let us know how you get on.
Regards,
Steve

Strange SFTP error message

I can no longer connect using SFTP on one of my sites in Dreamweaver CS6 and I get this error message:
Failed to Read the contents of XML Resource:
IDD_SSH_KEY_CHANGE_DIALOG
The password and paths are correct and I am able to connect using other SFTP clients such as Cyberduck. I've deleted the site several times and recreated in Dreamweaver, but the error message remains the same.
Somebody please point me in the right direction.
Thanks.

Yes!!! Step 12 worked. (Renaming the Configuration folder.) Thank you so much, you're a star.
Anyone else trying this on Lion or Mountain Lion should note that the user Library that contains this folder is not visible by default:
/Users/[username]/Library/Application Support/Adobe/Dreamweaver CS6/[language]/Configuration
You have to go into Terminal to make it visible, see the tutorial here:
http://macs.about.com/od/usingyourmac/qt/Os-X-Lion-Is-Hiding-Your-Library-Folder.htm
Also note: there's another Configuration folder within the Dreamweaver Application itself: Macintosh HD/Applications/Adobe Dreamweaver/Configuration, however renaming is no help at all - it makes Dreamweaver crash!

Update 12.1 installed with Error 7 (Windows error 126). Reinstalled. Same error. Uninstalled all Apple products. Reinstalled iTunes. Same error. Updated to 12.1.1. Same error message. Uninstalled everything. Reinstalled 12.1.1. Same error.

Update 12.1 installed with Error 7 (Windows error 126). Reinstalled. Same error message. Uninstalled all Apple products. Reinstalled iTunes 12.1. Same error message. Updated to 12.1.1. Same error message. Uninstalled everything. Reinstalled 12.1.1. Same error message. iTunes runs and plays my music, but the error message remains. It doesn't hinder my music playing, but it is annoying. And, this is all done on my work computer. I have not unpdated iTunes on my home laptop, cause I don't want to have to deal with this error message.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Link Update Error Message

I have an excel file that references one other file. When I open the excel file I receive a log in screen which displays the following:
I can choose read only or enter the password for write access, it doesn't matter as the error message remains the same. Next I am promted with the update link window.
I click "Update" and then receive the following error message:
I can either click "Continue" or "Edit Links". When I click "Edit Links" it displays the following:
The status of the worksheet in fault is ok. Within my document I know that the links are working because the information is updating.
This file exists on a network within our company. Any idea why I receiving this error message if the links are working correctly?

Ok..
Since this started after the update, perhaps you have a third party Safari add on installed that was compatible with the prior version of Safari but not 5.1
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
And try turning off extensions. Safari / Preferences - Extensions.

SL300 Thinkvantage Toolbox failure after Win7 upgrade

Despite getting the latest version of this utility - 6.0.5449.31 (using Lenovos Update program installed on PC), the program reports that it has stopped running (after "checking status") and closes down.
Have I missed something here? Surely a diagnostic program should be able to check things without crashing itself.............???
Anybody got this running on Windows 7?

Hi rogerd,
See this:- http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-Toolbox-Error-when-opening/td-p/1...
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Bad Score Style Deleted... error message?

I can't recall having this ever happen before...
I'm trying to open a song I was working on yesterday, but the latest version, as well as all back-ups, give me the message "Bad Score Style Deleted" when I try an open it, and even though there is an "OK" button to click, all that happens is I click the "OK" button repeatedly, and the error message remains, never goes away, and the song never opens.
This particular song was started from a SMF that the drummer had sent me along with his audio tracks, but I've done that many times before, without any problems.
Any ideas what this means, and how to get past it, before I start all over...
Thanks...

Adobe Digital Editions

ThinkVantage Toolbox error message remains

Similar Messages

Maybe you are looking for