Time entries booked against network & activity are not transferring to PS

Hi every one,
We have scheduled a job to transfer time entries which were booked against network & activity on daily basis,  but for some reason the time entries are not getting posted against the network (Only for certain network, see attachment), though it is not showing any error message when i saw the spool log for the job in SM37. When i ran CAT5 in test mode it is showing time entries which needs to be booked against the network and activity.
Can some one help me out to transfer the time entries via the job??
I have attached the screenshot from CAT5 transaction.

Hi Ram,
Variant will determine the selection of personnel numbers and other parameter defined on CAT5 selection screen. If manually posting is happening on network then it means network are fine.
What I can suggest is, you can create a new variant and then run it thought SM36 and check in SM37.
Go in CAT5 transaction, and untick test run, log and dates transfer can be ticked. Then save. Then variant attributes screen will open save the variant with a name and description .lets assume you saved the variant with name TEST. If you wish you can on save the variant on certain number of network or personnel number, it depends on you to keep it blank or run variant for limited number of records.
Now go in SM36 and click on STEP, in the ABAP program TAB enter "RCATSTPS", then select the variant using search help and you will find the variant defined above i.e. TEST.Check and save from bottom of the window. Come back once. Then click on START CONDITION, Date/Time - define a date and time for the variant "TEST" to run as a JOB.
Check in SM37 you will find the schedule JOB run time and date. After the JOB is finished you check report CJI3 for actual posting of network.
This will work fine, if in case you need few more fields to be defined in variant then I will suggest to create a variant via CATA instead of CAT5, their you will get more options to post time.
Regards,
Sandeep

Similar Messages

  • Record time against network activity in CATS

    Hi all
    Is there any special exit to be used to DIRECTLY record time against Network Activity in CATS ? I do not which to use the "Worklist & Copy" functionality.
    regards
    PK

    Hi,
    As far as i know, you can directly do a timesheet entry for a network activity. You need to have details like activity type and cost center to do this. Also note that timesheet entry in CAT2 is directly influenced by the data entry profile that you use and the settings in CAC2 transaction.
    I would suggest you to check both the Data Entry Profile and the setting in CAC2. If you find everything is fine here please check if there is any user exit that is preventing you from making a timesheet entry.
    Regards,
    Gokul

  • Recording Time against Network Activity in CAT2

    Hi All
    In CAT2 can we post time against Network Activity for a Employee directly by entering the Network Activity? How do we do this?
    I do not wish to use Worklist & Copy functionality. If I enter time against Network Activity by manually entering the number, I get the error 'Enter purchase order number and item number'. It is possible to do this against WBS. How do I correct this issue?
    regards
    Arvind

    Hi Aravind Nadar,
    Can you check the below steps, let me know once whether it is working fine.
    SPRO->Cross-Application Component->TimeSheet->TimeRecording->Choose Fileds.
    step1: Double click on the 'Data Entry Section' line Item
    step2:Click on Influencing Button on the Application Tool bar.
    step3: content Field-enter F4, and select the Data Entry Profile which is used by you.
    step4: enter.
    Step5:search for 'Sending PO Item, make it as 'input field'
         and 'Sending Purchase Order' make it as 'input Field'
    Step6: save the changes.(Back to initial screen)
    Now you can check the CAT2 transaction with Data Entry Profile, for which you have made changes above.
    Best Regards,
    Vemula

  • After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

    After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all  my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

    Try these for the first attempt:
    First be sure to have a backup copy of the library if you already don't have one.
    OT

  • Restoring iPhoto from Time Machine. However iPhoto albums are not transfer

    iPhoto albums are not transferring. I just have a bunch of photos with no albums/details/comments etc. I have done a few searches in support and have found similar problems but nothing like mine, which seems to be that I have a back up of all my photos in Time Machine but when I open Time Machine, I cannot simply select a previous restore date as I have been able to with everything else so far. I have tried dragging the whole iPhoto Library folder to iPhoto but again, end up with thousands of pictures with no albums... Any suggestions? Thanks.
    It seems iPhoto is backed up but does not have several backups in Time Machine.
    Using iPhoto '06
    Message was edited by: BrMendez

    I think you may need to post this one on the Time Machine forum.
    http://discussions.apple.com/forum.jspa?forumID=1227
    In later versions you can restore +to the iPhoto Library+, but as v6 predates Time Machine it's not possible to do that. Hence you need to restore an entire Library and open it.
    Regards
    TD

  • HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

    Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

    Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

  • How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

    How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

    In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

  • I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service"

    I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..

    Where did you purchase it from?  There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked.  These phones are subject to re-locking to the original carrier, particularly when updated.

  • Cannot activate cellular data network you are not subscribed to

    Cannot activate cellular data network you are not subscribed to a cellular data service. Never happened until I have switched to boost. I have spoken with them for hours and they say it's fine from their end and I've reset network settings, replaced my nano sim for my iPhone 5, restored my phone played with wifi on and off airplane mode on and off I don't know what else I can do. Please help me experts!

    Under "settings / general / network" is your "Cellular Data" button set to "ON"?

  • Is it possible to set your language preference on books so you can avoid looking at books in languages you are not interested in ?

    Is it possible to set your language preference on books so you can avoid looking at books in languages you are not interested in ?

    Hi,
    I don't think so, I would be happy to have such function too.
    In the French iBook store there is a section where you can find books by language, I guess in other countries there is the same section. But it's not really convenient…
    Hope this helps,
    Guillaume

  • Free of charge items, ie price = u00A30.00 are not transferred to backend.

    Free of charge items, ie price = £0.00 are not transferred to backend. PO created with held status, but the SRM PO item IR flag is selected. If we manually amend the SRM PO item to remove the 'invoice receipt' flag, then save the PO, the PO does get to the backend with a price of zero, the IR flag de-selected and the 'free' item flag selected.
    How do we manage to get the PO with free items to the backend without having to manually change the held PO in SRM? We are on SRM 5.0 using extended classic.

    Hi
    <b>We have done this type of requirment.. several times.. This is easily possible ..</b>
    <u>You need to Implement the BADI - BBP_CREATE_PO_BACK using SE18 Transaction.</u>
    <b>Either you can do this sample code inside BAPI (Make changes accordingly) or inside the BADI - BBP_CREATE_PO_BACK / BBP_CREATE_PO_BACK_NEW depending on your requirement.</b>
      LOOP AT po_items INTO ls_po_items WHERE net_price IS INITIAL.
    * Reset the IR Indicator for Items with Zero net price
        ls_po_items_add_data-po_item = ls_po_items-po_item.
        ls_po_items_add_data-ir_ind  = space.
        ls_po_items_add_data-gr_ind  = 'X'.
        ls_po_items_add_data-gr_non_val = 'X'.
        APPEND ls_po_items_add_data TO po_items_add_data.
      ENDLOOP.
    <b>Related link -></b>
    Re: Final Entry/ Final Invoice Indicator to be checked Auotmatically
    <u>Do let me know.</u>
    Regards
    - Atul

  • Changes to order are not transferred

    Hi,
    our PPDS users are facing an issue in Product Planning Table ( transaction /sapapo/ppt1).
    When we create a planned order and convert to production orders, the system converts with out any issues.
    After some time when we drag the production order to a new time ( in DS board), fix the order, then when we save, we get the message " Changes to order 100065265 are not transferred" and the order moves back to where it was... The  # 100065265 is our production order in created status.
    Looking at the error details, I thought there are some changes to the order being done in R/3, but there were no changes to that order in R/3 at that point and the same change, if done after some time goes through...
    This is happening almost for every order and it's annoying to keep click ok on this order, wait and then reprocess again...some time we get the error multiple time before the system accepts the changes...
    Any idea on what might be happening?
    More details about the error,
    ===
    Changes to order 100065265 are not transferred
    Message no. /sapapo/cdpssimulati015
    Diagnosis:
    The changes made to the order 100065265 in SAP APO can not be transferred as the order has already been changed by the linked R/3 system
    System Response:
    If you have made minor changes to an order in SAP APO and changes to this order are simultaneously being transferred from the R/3 system, only the changes from the R/3 system are adopted. The changes you made to the order manually in SAP APO are lost
    In technical information, I see the application area as /SAPAPO/SIMULATI, MESSAGE # 015 and main program SAPLSHL2.
    Thanks,K

    Hi,
    It seems the production order details are getting updated in ECC with order related settings you maintained at ECC, like settlement profile, etc., During that time, if you try to change the production order in APO, since the ECC update for the order is not yet completed, it gives the error. Thats why after sometime, when you change the production order, it allows you to change.
    Please try this, once you convert the order in APO, go to ECC and try to open the order in CO02 or CO03, it will give you an error the order is already being processed by XXXX. If so, then it is the time taking to update the production order in ECC.
    Also, try this, once you convert the order, immediately save and after sometime you change the time.
    Please check and revert.
    Regards,
    Manimaran M.

  • SRM PO Changes are not transferred to Back end

    Hi All,
    I have a problem in PO changes.
    We are using extended classic scenario. User create PO in the portal and the PO will be transferred to the back end R/3 via RFC. Earlier in 4.7 we the PO's are updated with the changes.
    Recently we have upgraded to ECC 6.0. Now the changes are not transferable.
    Could any one help me to fix this issue and please give the steps that i need to check for fixing it.
    Regards
    Pratap J

    Hi Thaigo,
    Thanks for your input. please go through the below.
    These are the table entries in BBP_BACKEND_DEST
    Client Logical system Destination                        System type RFC possible Local FI validation
    500    EP1CLNT500     EP1CLNT500                         EBP_5.0                  X      0
    500    RP1CLN500D     RP1CLNT500DIAG                     R/3_4.70    X                   0
    500    RP1CLNT500     RP1CLNT500                         R/3_4.70    X                   0
    In the table, it was still 4.70. So it needs to changed to ERP_4.0 ?
    Regards
    Pratap J

  • Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

    Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

    Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

  • HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK.  Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

    I have a problem.
    I bought Pages and Numbers for my iMac and so far everything was OK.
    Suddenly i have a problem with connection to iCloud.
    Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign  (small shape of iCloud), that they are waiting to be uploaded to iCloud.
    I think the iCloud is OK.
    i can see and manage documents in iCloud. i can create them on iPad and  see them and delete them in iCloud.
    But not on iMac.
    i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

    I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

Maybe you are looking for