TMS not active for system TST

Hi, Gurus,
A new system ECC5 is Installed, on the same system ECC6 is also present when I save STMS it took the Transp. Domain Domain_ECD which is ECC6 SID.
Regards,
Darshan...

Hi,
if you used oracle then
login as ora<SID>
sqlplus /@<SID>
delete from usr02 where bname = 'SAP*' and mandt = <client>
set "login/no_automatic_user_sapstar = 0" in your instance profile
restart the server
login with sap* and password pass
regards,
kaushal

Similar Messages

  • Trace recording cannot be activated for system

    Hi All,
    I am trying to record a dynamic TBOM from SOLAR01. When i am pressing the button to create TBOM, system is throwing me the below message "Trace recording cannot be activated for system".
    I have checked all the prerequisite and the authorization requirements as mentioned in the post " SAP Community Network Wiki - Solution Manager - Prerequisites to TBOM creation from SAP TAO" and have assigned to the respective user. But still system is showing the same error message.
    Please help to rectify this issue.
    Regards
    Mohar

    Hi Mohar,
    There is one note for this:
    2005027 - Error message 'Trace recording cannot be activated for system XXX client nnn' when creating dynamic
    Have a look at it.
    Divyanshu

  • Message LP327 WM Not active for plant

    Dear All,
    We have just upgraded our SAP system from 4.7 to ECC6.0, While doing a repetitive manufacturing backflush a warning has appeared (LP327 WM Not active for plant), the statement in the warning is correct, the plant is not active for WM, I was wondering if this particular warning could switched off.
    Kind Regards
    Mark Summerbell

    Hi Mark,
    The message is triggering from std SAP program RLLT0R00 and is defaulted to Error message.We cannot change that to warning message in that program.Pls try to search suitable OSS notes for the  same.It looks like Extent WM is active for your plant so the message is issued.
    Pls see below attached details of Extent WM
    Reg
    Benny
    Extent Warehouse Management
    Key that controls the use or the degree of activation of Warehouse Management for a storage location. The key controls whether bin stock is to be managed in the MM-WM component.
    The field can have the following settings:
    blank = normal management of stock in bins. The full range of functions provided by the MM-WM component is available.
    1  = Lean WM for inbound or outbound deliveries. The delivery or pick is executed using transfer orders (from MM-WM). These transfer orders, however, do NOT update bin stock in Warehouse Management.
    2  = For this storage location, you can use normal SD picking in combination with doors and staging areas. In this context, no Warehouse Management functions are activated.
    3 = Lean WM for outbound deliveries. Picking occurs using transfer orders (from LE-WM). However, these transfer orders do NOT update bin stock in Warehouse Management.
    4 = Lean WM for inbound deliveries. Putaway occurs using transfer orders (from LE-WM). These transfer orders do NOT, however, update bin stock in Warehouse Management

  • Data filtering not activated for ALE processing of Outbound Deliveries

    Dear all,
    we're currently upgrading from 4.6c to ERP 6.0 and are facing a serious problem with our IDoc interfaces:
    In 4.6c, data filtering for Message Type SHP_OBDLV_SAVE_REPLICA was activated and use to extract some segments from the IDoc sent to our logistics provider.
    In ERP 6.0 data filtering is not activated for SHP_OBDLV_SAVE_REPLICA and we do not know how to activate it. For some reason, we can still see the data filtering setting when we switch to "system view" in BD64 but we're not able to change it.
    Checking filter settings in the old system using transactions BD60, ... we do not see any clue how data filtering or filter objects have been defined for SHP_OBDLV_SAVE_REPLICA.or in it's context
    Help please - thank you very much in advance,
    Martin Pluntke

    Dear all,
    thank you for your help. I've just realized that the former project team made a modification to object LIKP, method SAVEREPLICA in transaction BDBG and set it to "Data filtering allowed".
    This setting was lost during upgrade.
    Last question: When redoing this modification (I hate to do this but that's the only way to keep the interface running) and save it I get an error/warning message during generation that the definition is inconsistent. I can continue the generation or cancel it. However, the switch is activated and my filter settings suddenly appear again in BD64 (they've been there all the time, but not displayed or active).
    Is there anything I've to keep in mind? Can I generate, should I ignore?
    Thank you all for your help,
    Martin
    Edited by: Martin Pluntke on Feb 8, 2008 4:37 PM

  • Having problem w 3rd party software ., there tech advsed me to repair  permissions  before  reinstalling software . However  , querrie says  repairing permissions  is not good for  system .  whats up ,, help  !!!

    having problem w 3rd party software ., there tech advsed me to repair  permissions  before  reinstalling software . However  , querrie says  repairing permissions  is not good for  system .  whats up ,, help  !!!

    I've fixed the problem - I think.
    I forgot I had the program "Little Snitch" installed on my computer. So I went into it and saw that it was blocking most of my connections for all the programs I use on a daily basis. Once I lifted the RULE to those certain programs - BAM - everything came back to life in an instant!

  • AFS material-/mrp-status not active for plant.

    Hello Everyone
    I am facing an issue while executing the sales order
    Issue  :AFS material-/mrp-status not active for plant..
    CAN ANY ONE RESOLVE THIS...
    Regards,Rajneesh

    Hi Rajneesh,
    Tht prb might be the material master.
    Goto Material master, select AFS MRP View and activate/ press the AFS MRP status button and save.
    Reward with points if it is helpful
    Kishore

  • Form name PYXXFO_SAP_TIM_99_0001 not active for form SAP_TIM_99_0001

    Hi Experts,
    I am on ERP2004 SP17 EP6.0 SP20. I am trying to implemet Time Statement application. I am getting the error
    "Form name PYXXFO_SAP_TIM_99_0001 not active for form SAP_TIM_99_0001" on portal when trying to access the time statement.
    Where can I activate the relevant form on R/3 side? I appreciate your help.

    Hi Barin,
    Thanks for replying to me. I activated the form SAP_TIM_99_0001 in hrforms.
    Now I am seeing the error <b>"Unable to generate form PYXXFO_SAP_TIM_99_0001</b>      
    But I do not see this form in hrforms? where can i find this form?
    regards!

  • I got a meesage that my redemption code was not active for CS6

    I got a message that my redemption code was not active for CS6

    Hi baltimorecameraclub
    Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • Duplicate clearing not active for id bupa dialog

    Hi ,
    Did data cleansing for temporary id with existing BP id,clearing case id has been generated.
    When i checked case id in "CLEAR_INT" transacton code its giving message "duplicate clearing not active for id bupa dialog"
    and not able to enter into the screen
    Can anyone worked on such issue,plz reply.
    Regards,
    PV

    Hello Ricky,
    So the ASA NAT;s that server to a specific IP on the inside and also to a public ip address on the outside....
    Now when you connect from outside you get that error message.. Does that happen with all the connection attempts??
    Regards

  • Source System of Dev System is not active QAS System.

    Hi
    I am trying to transport my SAP-BI flow from Dev System to the Quality System.
    but I am getting an error  "Source System of Dev system is not active in QualIty System.
    I have checked RFC Connection ,everything is fine.Please help.
    Thanks and Regards,
    Asim

    Have you checked the mapping of the source systems in the conversion table (RSLOGSYSMAP)?
    Usually, DEV source systems are not available in QA, so when you transport to DEV, the source system assignment has to be changed to a QA source system.
    For example, source system CRDCLNT100 (CRM DEV system) is connected to BWDCLNT100 (BW Dev)
    and CRTCLNT100 is connect to BWTCLNT100.
    Objects in BWD which are assigned to CRD, have to be re-assigned to the CRT source system when transporting them from BWD to BWT.
    The mapping table is maintained in RSA1, menu option tools > 'mapping of the source system names'.
    Jan.

  • Budget check not active for commitment & actual budget

    Budget check runs  fine while checking budget limits for Production order and vendor invoices i.e does not allow to further create production order and vendor invoices if budget limits exceeds the released budget.
    But  this budget check does not work on procurement processes ( PR, PO &GR).
    No warning or error message pop out and the system allows to further create PR/PO/GR  beyond  released budget
    What  config changes are required to make budget check active for procurement processes.

    Hi vishal,
    Check the Transcation groups in Budget tolerance limits.
    PScostsbudget---define tolerance limits.
    If you assign ++ All Activity groups it will activate the Budget avaliability control for all Transcation.
    Check the avaliability control in OPS9 whether the activation type is 1 or 2 . If  2 run the avliability control CJBN.
    Hope this will helpful,
    Regards,

  • Rebate Agreement saved even if the cust. or payer is not active for Rebate

    Dear All,
    In my Rebate scenarion, Customer is Payer. When i an creating the Rebate Agreement & entering the Payer number , system is giving the warning message but allow me to create the Rebate agreement.
    I want system to restrict to create Rebate agrrement if the payer or customer is not entitled for rebate.
    Thanks to All

    There is no IMG setting for this message. I suggest you should take help from ABAPer to change the message type from warning to error.

  • The expenditure organization is not active for Expense Report

    Greetings to all,
    We ran into a problem, where a person submitted an expense report with project related information. The exp report gets an error in the workflow. When we look at the workflow error message is: This expense report failed payables validation.
    When we look at the notification for error message, shows the expense report and for the line that has a problem, gives the following error message:
    "The expenditure organization is not active."
    We check the org in HRMS, we look up the org and has the following setups:
    HRMS-->work structures--> organization (query the cost center)
    then when looking at the cost center has the following:
    under organization classifications:
    Project Expenditure/Event Organization
    Project Task Owning Organization
    HR Organization
    Then looking at hrms-->organization--->hierarchy
    query for hierarchy-->we get our hierarchy,
    then under organization-->query again for our main org, we see then the subordinates which we see the cost center again.
    Everything looks good our point of view.
    If have researched this issue on ML and have read the following notes: 423267.1, but this does not resolve our issue.
    If someone has encountered this problem, can you share the additional steps to troubleshoot this issue.
    Thanks in advance for any help on this matter.

    All --
    It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
    I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
    Joe

  • EN is not activated for smartform and has no errors

    Hi Everyone,
    I was looking at couple of threads on topic "smartform name" EN is not activated and has no errors, but I couldn't get a proper answer. So posting my query here.
    I had a created a smartform for dunning process for languages F (French) and N (Dutch). While creating, in language attributes, under translation I had chosen the radio button Into selected languages and specified the languages and at the window level also I had maintained the condition on the language key (eg: wa_tab-spras) and activated without any errors.
    After the configuration when we are checking it for a FR customer or NL customer, we are getting error saying "For smartform EN is not activated and has no errors".
    Please suggest me how can I fix this error. Hoping for a solution...
    Thanks & Regards,
    Kumudwini.

    Hi Sanjeev,
    Yes, it is generating the function module and I changed the general attributes into all languages.Will check and get back to you..
    Regards,
    Kumudwini.

  • ARD 3 'not active' despite System Preferences saying it is!

    The setup - a network of 54 Macs of various configurations on a Windows 2003 network running 10.3.9 have ARD 3 installed. All is well.
    The change - due to a Microsoft patch on our network, we were forced to upgrade to Tiger. We purchased 10.4.6 on DVD from CDW and installed. But 10.4.6 is problematic with Adobe CS - so we were forced to downgrade to 10.4.5
    The problem - after this downgrade to 10.4.5, we made sure ARD was still turned on in the System Preferences. But when I look with the application, every single one says the ARD is not activated!
    What do I have to do to get them back?

    No, all the of the users were active.
    Despite the OS reinstall putting ARD 2.2 back into the system, ARD wasn't active. So I went back into the Previous system and found the ARDAgent that was removed by the reinstall. I copied the RemoteManagement folder from the System/Library/CoreServices folder and replaced the new RemoteManagement folder that had been recreated.
    Voila - ARD is working perfectly again.
    So because I had ARD 3 installed, when we did the OS reinstall it put in ARD 2.2 which my ARD software couldn't recognize anymore. It didn't even recognize that it was 2.2 - just said ARD not active. I replaced the 2.2 ARDAgent with the 3 ARDAgent from the Previous system folder and all is well.

Maybe you are looking for