Tomcat Access form internet

Hi all,
I have deployed a JSP application on a tomcat server on one machine. I added the tomcat module to apache and tested it. I works fine when I give it http://localhost/<appDir>/<page.jsp>. When I access it from some other computer on the internet as http://<my ip>, the apache home-page appears, but when I do http://<mu ip>/<appDir>/<page.jsp>, the request times out.
So then I removed the apache server and changes the tomcat port to 80 in "server.xml". Now I can directly access my application locally, but a request through the internet times out. even the ROOT page doesn't appear. What could be the problem.
The computer is definitely accessible cause I can access the apache server, but no requests made to the tomcat are resolved.
Please help.
Nirav

Hi
To work with tomcat server you have to put your module files int the webapps directory.
to make it work you have to write: http://<ip>:<port>/<appDir>/<page.jsp>.
the port is usaly 8080.
if you have a firewall check that the he accepts the tomcat server.

Similar Messages

  • TS1398 I have connected my iPad 2 to my Mac Air over blue tooth.  Booth say they are connected to each other.  But I can not access the internet on the IPAD.  I can connect over blue tooth from my iPhone to my iPad with no issue.  Any thoughts?  Thank you

    I am trying to connect my Ipad 2 to my Mac Air over bluetooth.
    I can connect them to each other, and both machines say they are connected over bluetooth.
    However I can not access the internet on the Ipad...says it is not connected to the internet.
    Does anyone know if you can fix this?
    THank you

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • After a router reset, can't get second PC to access the internet

    I had my wireless router (WRT54G) and printserver working fine and then a problem with my DSL had me resetting both boxes (yeah I should have know better). I've fought back and have everthing working for one PC that has an internal wireless but my other PC has  a  WPC54G wireless card and I can't get it to work. Both PCs are XP, SP2. The Linksys appl says that it contacted the access point but can't access the internet. It has always been flaky about this but usually gets to the internet. It does have a good IP address, the WEP key and channel are right but 'no joy'. I can ping the router and the printserver but I can't bring up the router's home page but I can print to the printserv. I did not change the modem to 'bridge' yet.
    TIA....jack

    What is the IP Address you are getting on the computer...?It should be in the range of your router.IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security software on the computer...
    If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
    Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
    If yahoo times out then provide static DNS on your WAN Connection...
    Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Wireless Network Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 4.2.2.3>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

  • Accessing the internet anywhereon a Macbook???

    I'm thining of purchasing a Apple MacBook MC207LL/A 13.3-Inch Laptop I would like to be able to access the internet to browse, play live365, xmradio, etc... I would like to be able to do this anywhere (in the city). Is this possible or do I need to be in an internet or wi-fi network? Im thining this because i saw where Cricket offers you wireless internet on your pc anywhere you go.

    The service will probably come with some hardware. If that hardware is in the form of a PCMCIA card (also called PCCARD), then the standard MacBook cannot use it, since it does not have a PCMCIA slot.
    Other services use a dongle that connects to the USB port. If the provider says it supports Macs, then you're good to go.
    Do note that you really need 3G speed. Service very much depends on the city you live in. Check the coverage maps of the provider. Also note that a lot of 3G networks have been suffering in recent times.

  • When im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.

    when im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.

    You must have a valid form of payment for the app store in the country you are using. Most app stores are separate legal entities to comply with local laws. It is possible to have an account without a credit card, however; see: http://support.apple.com/kb/HT2534

  • Ios VPN access form handled devices

    hi
    someone here had configured on a router the vpn access form handled devices?
    Really i don't know where to start!

    You must select one of the following modes of operation when you enable the PIX Firewall as an Easy VPN Remote device:
    Client modeIn this mode, VPN connections are initiated by traffic, so resources are only used on demand. In client mode, the PIX Firewall applies Network Address Translation (NAT) to all IP addresses of clients connected to the inside (higher security) interface of the PIX Firewall. To use this mode, you must also enable the DHCP server on the inside interface, as described in " Using the PIX Firewall DHCP Server."
    Network extension modeIn this mode, VPN connections are kept open even when not required for transmitting traffic. This option does not apply NAT to any IP addresses of clients on the inside (higher security) interface of the PIX Firewall.
    In network extension mode, the IP addresses of clients on the inside interface are received without change at the Easy VPN Server. If these addresses are registered with the Network Information Center (NIC), they may be forwarded to the public Internet without further processing. Otherwise, they may be translated by the Easy VPN Server or forwarded to a private network without translation.
    http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a00800eb72d.html

  • Manager password in tomcat for form based authentication

    Hi all,
    I have a jsp using form based authentication.I have set up the web.xml,server.xml and created my database with the various users and roles but when i try to deploy the application,it as for the manger username/password and when i enter what i have in the database it refuses to connect.
    Anyone has any idea what i might be doiing wrong?
    Thans in advance

    Hi,
    I'm a little confused. You wanted to know how to configure Tomcat for form based authentication, and I sent you an article on how to do that. Is there something more you need from me? You had offered 10 duke dollars for this post, and if there is more I can do I will help for the remaining amount, but I can't help you getting access to the Tomcat *.xml file.

  • Configuring tomcat for form based authentication-help badly needed

    hi , i want to have form based or some other way of authentication for the users comming to my site , i have access only to web.xml , but in tomcat documentations its giveni need to change server.xml and tomcat-user.xml , can i make these changes on web.xml to implement it or please tell me way out of this please , i tried even jguard but it needs changes in jvm which also not into my access

    Hi,
    I'm a little confused. You wanted to know how to configure Tomcat for form based authentication, and I sent you an article on how to do that. Is there something more you need from me? You had offered 10 duke dollars for this post, and if there is more I can do I will help for the remaining amount, but I can't help you getting access to the Tomcat *.xml file.

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • Updated to firefox 4.0. since then my computer is very slow accessing the internet, websites and getting information from within a website.

    Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
    Many times I have to exit Firefox and re-enter it later to access the internet.
    Please advice what I need to do to get back to the speed I had with the older version of Firefox.
    Thank You,
    Dennis

    Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
    Many times I have to exit Firefox and re-enter it later to access the internet.
    Please advice what I need to do to get back to the speed I had with the older version of Firefox.
    Thank You,
    Dennis

  • I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work.  When I go to internet the screen is grey??? please help I am a new user!!

    I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad.  When I did that twice, it did not work.  How long does it take for the clear history to work?  I am a brand new
    user of the ipad2 and I am disappointed that this is happening already.

    Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad?  Are you at home trying to connect through your home router?  If you are at home, did you put your home routers encryption code as your password?  The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers.  Let us know......

  • Cant access to internet

    Hi ,I am from Azerbaijan ,asking question about internet problem in Server 2008 ,actually there are same problems mentioned before ,but none of them is same as mine.I have testserver HP proliant,I want to test and practise all Exchange ,TMG and etc in
    this server ,I am trying to create my own small network ,I installed Vware 10 in Server (OS is Win 7) ,then in  Vware  I installed Win 7 and Server 2008 R2,server has 2 NICs.I plugged the cable one of them ,now in the server there is internet
    ,but my target is accessing internet from inside ,from  Vware (server 2008 and it's clients ).I installed AD ,DHCP (172.20.1.2-172.20.1.40)and DNS server ,when deploying AD it asked me assign one IP adress,I manually configured 172.20.1.5 ,and gave
    8.8.8.8 and 8.8.4.4 DNS adress ,and I disabled other NIC .I tried all versions but couldnt access to internet .I tried mainly about NAT ,also in  windows 7 client when I choose Network adapter VMnet2(NAT) it access to internet ,but I think my adress differs
    from mine, It is long story ,I will appreciate it ) thank you very much :)  

    Hi,
    Actually, it’ a VMware issue. You can post here:
    http://www.vmware.com/support.html
    Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change
    without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    And some tips for you:
    Since you want to configure windows server as a DC, you should never give it two NIC. A multi-homed DC is really problematic.
    And the DC should has its own DNS, if you assign an open DNS, the internal domain name will not be resolved. For external name resolution you can specify a forwarder.

  • I did a software update on my ipad and now cannot access the internet. how can i fix this?

    I did a software update on my ipad to 8.1 and now cannot access the internet.  How do I fix this?  My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

    Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

  • When I open a second Profile while another is running the second cannot access the Internet until I close the first. Why?

    I often have occasions to run more than one Profile simultaneously (usually because of different add-ons I've installed on different Profiles). In the past this worked fine. Now, all of a sudden, if I open a second Profile while the first is running the second cannot access the Internet until I close the first. It keeps looking for a website, and failing, until the system "times out". If I close the first Profile, the second is then able to access the Internet.
    Note: this is not a problem with opening a second Window in Firefox. As long as they are from the same Profile they will both work fine. Nor does this stop me from using a second Profile to look at website files I have saved to my computer. The only problem is that the second Profile cannot get on the Internet.

    I just checked, the setting was for "Automatic proxy configuration URL", in the past it was set on "No Proxy". So I'll try changing that (and/or try other proxy options), and see if that solves the problem.
    If it does, then just one (academic) question remains: why did that happen in the first place? I don't care what the answer is, so long as your suggestion solves the problem.
    Thanks.

  • I can't access the internet with Firefox on my computer (Windows 7 PC). I have used Firefox as my browser for 1 year but 5 days ago it stopped working even though Internet Explorer worked fine. I can't solve the problem and need some help.Randy Brown

    September 26, 2011
    Dear Mozilla,
    I am having some difficulty accessing the internet with Firefox on one of my PC computers. I normally use Mozilla Firefox as my web browser and google is my homepage and gmail is my email system. The operating system is Windows 7. For over a year this system worked perfectly but a few days ago it stopped working. When I launch Firefox now I get the message that that website (www.google.com) is unavailable. In fact, I can’t access any website and I am blocked from the internet entirely within Firefox. My internet connection is fine because Internet Explorer works fine. I can access google and any other website within that web browser. I have investigated all the security issue I can manage and found no smoking gun. I’ve tried uninstalling and reinstalling Firefox to no avail. Is Windows 7 compromising the effectiveness of Firefox? Any suggestions or other assistance you can offer would be appreciated.
    Sincerely,
    Randy Brown
    [email protected]

    You only have to clone your mac when using certain cable modem.  You don't clone your mac when using dsl.
    Greetings from Northern Ontario, Canada

Maybe you are looking for