Training Budget exceeded in Training & Event Mgt (warning message required)

Hi Experts
I have configured budget management for Training and Event Management.i.e budget type, budget units, assigning budget units to financing units and entered the budgeted amount for budget unit.
i want to know how can i get warning message at the time of booking an employee that your budget is exceeding the limit.
My report (Comparison report) in showing in red highlighted colour that budget exceeded but i am not getting any message at the time of booking an employee for the course that budget is exceeding the limit.
Can any one tell me from where i can switch on or control this warning or error message.
Thanking you all in advance for your time and consideration
Regards,
Saad

Dear Chetan
I have configured all budget functionality as mentioned in that document. My question was to have a check that give error or a warning message if training budget exceeds. I need something like budget control permisibility function
Regards,
Saad

Similar Messages

Warning message required.

Hi everyone
When I create STO with quantity 100 and try delivering it with quantity -120, SAP allows it. But I want to put a warning message here if the delivery quantity entered is more than 10% of STO quantity. i.e I want to set upper delivery limit as 10%.
I have maintained the same in delivery tab of Item data-(Over Delv Tol-10% and under dely Tol-1%). But still its accepting 150/180 qty or whatever we put.
Pls let me know the configuration required for a warning message.
Regards,

Hi,
try TC OVLP / Define Delivery Item Categories. For relevant item types, set "Check Overdelivery" indicator to A / Note about the situation or B / Situation rejected with an error message.
Field desc:
Control for checking for overdelivery
Specifies how the system reacts when, during delivery processing, you exceed the original order quantity.
Use
For each delivery item category, you can specify whether the system checks for overdelivery and, if so, whether you receive a warning or error during delivery processing. If you have specified an overdelivery limit in the sales order or in the customer-material info record, you can use this indicator to control how the system reacts.
BR, Zuzana.

Warning message required when we chnage invoicing party in MIRO

HI All,
Our client require the below settings.
If we change the invoicing party in MIRO which is different than the PO vendor then system should throw warning message or pop up.
I had tried to convence them that it can impact scenarios but they says they require warning message at least so that if anybody is changing the Invoicing party then he will get the message.
I had tried by maintaining M8286 message in OBA5 but i didnt got the warining.
Please suggest how we can achieve this.
Regards,
Umesh

Dear,
Take ABAPer help to make a warning/error message - if invoicing party chaged.
Secondly please go through OSS : 322430 & 1156325.
Also BADI for changing payment terms in MIRO "MRM_PAYMENT_TERMS ".
Regards,
Syed Hussain.

Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
See if another contact is marked as this is my card.

Warning message required in po to identify whether price is taking from info record or condition record

Hi experts,
while creating purchase order,If condition record and info record both are exists means how system will identify that which price need to pick for particular vendor.
Is it possible to set warning or error message for above mentioned scenario.
Thanks ,
Deepika.

If an info record has no price conditions itself then the price is determined from the last PO.
It is not always table A017, there are more tables for conditions to the info record, e.g. A018 and A025, this is dependent on the level of your info record which can be created at plant level or at purchasing organization level (no plant entered), with or without material number.
For more detailed information see the docu in help.sap.com: Price Determination - Purchasing (MM-PUR) - SAP Library
and the OSS note 456691 - FAQ: Price determination in purchasing
and 569885 - About Info Record Update indicator (EKPO-SPINF)

TEM:Costing in Training & Event Mgt.

Hello Friends,
My query belong to finding cost of each Training Program.
Client Practice:
Every time Training Program changes cost of Training Instructor(Internal/External), Manual Cost, Travel Cost also changes...
In SAP, Can we find out Training Budget for each Training program at cost item wise?
Since client Training's cost items values changes at every Training Program.
Pls suggest.
Regards,
Shail

Dear Chetan
I have configured all budget functionality as mentioned in that document. My question was to have a check that give error or a warning message if training budget exceeds. I need something like budget control permisibility function
Regards,
Saad

Need to remove "Budget warning Message"

Hi friends,
I have customer requirement that customer want that message should not display .
no budget is maintained but still this warning message is comming in the shopping cart screen in additional specification .
Can any body suggest me how to remove this message in nots for approval
Path : SRM 5.0 in Monitoring shopping cart->define search -> select any shopping cart-> additional Specification :
Budget warning message
This shopping cart may cause one or more budgets to be over
committed:-
Item     Description            Cost Centre Financial Year
Price     % Committed     Budget            Total Committed
    1    Test for Limit ch    SS0406
0.00            999                0.00                0.00
End of budget warning
Thanks in advance.
Edited by: Rashi on Feb 19, 2009 10:21 AM
Edited by: Rashi on Feb 19, 2009 10:22 AM

Hi ,
I am still waiting for solution....
I dont want to deactivate budget check.
Problem is related that in the message is showing incorrect value of budget. While changing shopping card its not comparring the budget value from R/3 system.
In R/3 FM is used to fetch budget information but every time its giving me same vale for diffrent GL account.
Can any body helo me on this.
Thanks

Report on Warning Message in sales order

I have configured in OVA8 such that it only gives a "Warning Message" and does not block the sales order.
Because these sales order are not blocked they don't need to be released. I need a report on list of sales order where warning messages have appeared for credit limit exceed.
As its only warning message and not erro, it needn't be released so VKM1, VKM2 & VKM4 doesn't solve the issue.

Hi,
It is not possible to get the report as you required in Std. System considers the sales order if the warning msg appears as same as a normal SO without any warnign msg. In status level (table VBUK) there won't be any change.
If you need it deliberately, then you shall take help from ABAp to develop a Z-report that too you need to use some sales order level user exit to capture the warning message(Message no. V1152) generated sales order no.s and then you can use the same info in Z-report.
Hope this helps..
Reg,
JJ
Edited by: Jagsap on Apr 14, 2010 1:22 PM

Training and Event Mgt module Budget

Dear Friends
The training dept wants to make a budget for the entire year for their training programs. How to perform this budget activities in Training and Event Mgt module
Or it should be done in FI?
Please let me know the procedure
Regards
Kumar

Hi,
First you need to configure the settings in TEM integration with Budget Management. You require these settings, for example, for comparing the budgets created for your organizational units with the costs incurred by further training and education measures.
For budgeting:
Path: Human Resources->Training and Event Management->Business Events -> Budget -> Budgeting
TCode: PVBO
After completign the budgeting you have to release the budget for using. Once you release the budget, you cannot make any changes.
Then you can make the budget comparison:
Path: Human Resources->Training and Event Management->Business Events -> Budget -> Budget Comparison
Tcode: PVBA
Thanks
Srinivas Ch

SAP Scripts for Training and Event Mgt

Dear All
The Following SAP Script ID
HR_ALL_BUCHSUPER
HR_ALL_FIXSUPER
HR_ALL_STORSUPER
HR_ALL_VORMSUPER
HR_TEM_NOTE_DISP
Usually SAP Script in Training and Event Mgt are connected with Output medium through transaction PP40 but the above mentioned is not there .
How to locate and get the same linked PP40 .
Regards
Raji

Hi,
Can you explain your requirement in more detail?
Regards,
Azaz Ali.

Training & Event Mgt (SAP Learning Solution- Delevery Method)

Hi,
We have recently upgraded from SAP 4.6c to ECC 6. And now we are implementing Training & Event Mgt. But to create new delevery method for BE, I think we have to go through SAP Learning Solution.
But problem is that the node for "SAP Learning Solution" is not showing up neither in Easy Access or SPRO. Have any one any Idea why?
Is it required to be installed separately. what is the procedure, please suggest.
Regards
simanta

Simant,
None of the enhancement packages of SAP is free of cost. LSO is one of the expensive module of SAP HR. Your client has to buy the license and no. of users account. Of course you will not be able to use any functionality without buying that module. It has to be activated in table T77S0. Updating tables LSOTFORMP_C" & "LSOTFORM_C", will not help. Anyways you can specify the delivery method in training and event management module itself, you dont have to buy LSO for that.
Sanghamitra

Training Need - TN in Training and Event Management

Hi
Did any one worked on Training Need (TN) in Training and event management? I have the below question.
For France there is a legal requirement to capture some 1.6 % of the employee annual gross salary towards training cost. So where to record the training cost of the employee in Training and event management and is there any link with payroll.
Logically it sounds as it does. but where and how is it connected with payroll.
Please revert if you know the solution.
Brs
Kenu.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

Work flow in Traing & Event Mgt

I need to create a work flow in Traing & Event Mgt, ESS
Is there any standard way to creat work flow in T & E Mgt?
pls mail

Hi,
Wrokflows in HR :Training and Event Management
Regards
Bala

No Warning Message occur when Budget change

Hi,
I setup a budget in SAP B1- by configuring in Administration >> System Initialization >> General Settings >> Budget
1) Check Budget Initialization Box
2) Check Warning and select all four document type
3) Upload Budget in Financials >> Budget Setup >> Budget through DTW
When i create a Journal Entry for the G/L Account for which was used in budget , no message can be popup and at the same time the entry will be add successfully.
How can I popup the warning message...???
I am Using SAP Business One Version 9 PL 8
Thanks
Janeesh

Hi Jagneesh,
Please check below links.
SAP Business One Training - Aug 22, 2012 - Budgets and Related Financial Reporting by Vision33 - YouTube
http://help.sap.com/saphelp_sbo900/helpdata/en/c7/471c6bb6c74085ab0cd3e52cb5fac3/content.htm?frameset=/en/45/114b7829fc4…
http://www.vision33.com/media/5465/howto_mg_budgets_2007_0.pdf
Hope this help
Regards::::
Atul Chakraborty

Budget Exceeded Issue - Activated budget profile for existing project

Dear Experts,
I have a Project and not using any budget profile, already actual data exist only in CJI3 no data in CJI5.
Now I assigned Budget Profile in that project.
While entering Budget in T-code CJ30, I can see values in assigned values for a wbs elements.
Example -
WBS Element - XXXXXX-02 - 2000 (Assigned) - Here Budget Profile not assigned in the project
Same WBS Element - Once Budget Profile assigned, when am assigning same 2000 budget am getting budget exceeded issue.
If I give 2500 I am not getting any errors, My tolerance as only Warning message.
Please Suggest - Screenshot attached
Thanks,

Hi Pavan,
As soon you enter your budgeting fig the availability control triggers, this check your assignment with available budget.this the reason you are getting error as you say there are already actual posting in CJI3.In this you need to balance first the fig which is appear in assigned column in CJ30.
Its a good practice to give budget first release it & then start procurement,confirmation etc.
Check this in budget profile availability control.
Regards,
Sachin.

Training Budget exceeded in Training & Event Mgt (warning message required)

Similar Messages

Maybe you are looking for