Transfer asset within cocd.

Hi all,
My client needs to transfer some assets into other asset class. here i created asset class for the same.
for transfer of these assets in ABUMN, what is the necessary data i should maintain? after transfering the asset the previous asset will automatically closed?
kindly give me the suggetions in this regard.
Raghav

hi,
now the warning message is coming like :
Retirement/transfer on asset 500317 0 takes place with no values
Message no. AA396
Diagnosis
You are posting a retirement to an asset that does not show an acquisition value in any of your depreciation areas.
Procedure
Check the asset and the transaction type. For this asset, it only makes sense to use a transaction type with revenue.
here where we can give the transaction type? and where i give the acq.value in abumn?

Similar Messages

Setting the doc.type to use for t.code ABUMN (transfer asset ...)

Hi All,
Could anyone show me where to set, in customizing, the doc.type to use for t.code ABUMN (transfer asset within company code)?
Thanks
Umberto Gandalf

AO71                   Document type for posting deprec.
AO72                   Specify posting procedure
AO73                   Define Transaction Type
AO73_INV               Define Transaction Type
AO74                   Define Transaction Type
AO75                   Define Transaction Type
AO76                   Define Transaction Type
AO77                   Define Transaction Type
AO78                   Define Transaction Type
AO79                   Define Transaction Type
AO80                   Define Transaction Type
spro- FA - AA - transactions - transfers
Rgds.

Depreciation for transfer asset

Hi Sap Guru,
I use ABUMN to transfer asset A (100%) to asset B.
And the APC value is 617.00 and accumulated depreciation is 37.02.
I use " percentage from useful life (0011) ".
but I find the system use APC amount to calculate the depreciation for the transfer year not including the adjustment value (37.02) ???
And therefore ,the monthly depreciation of asset B is not the same as that of asset A . why ???
Can we make the system calculate the depreciation for B according to APC and adjustment value ?
please help me answer the question . thanks a lot.

Hi,
we find the depreciation amount will recalculate based on the depreciation parameter in new asset .
Therefore , we make all depreciation parameter including depreciation key , useful life, depreciation start date etc in new asset the same as those in old asset.
And then , the depreciation amount will be the same.
You can use path Financial Accounting>Asset Accounting>Transaction>Intercompany Asset Transfers>Automatic Intercompany Asset Transfers>Define Transfer Variants>(Specify Transfer of Fields (for New Asset in Target CoCd))
to transfer the depreciaiton parameter to new asset.

Report for track the assets history only for transfer assets through ABUMN

Hi experts,
I am transferring the some value from one asset to another asset through ABUMN, is there any report to see the this kind of transfer assets
useful answers duly rewarded

Hi,
You can view the intra-company transfer report S_ALR_87012054.
Thanks
Jagdish

Transfer assets collectively to new class and create new assets like ABUMN

We need to change the account determination for a few Asset Classes that already have assets with postings. As a result we must create new asset classes and assign a new account determination.
Is there a program that would allow transfer assets collectively to a new asset class and create new assets automatically similar to ABUMN? T-code ABUMN allows you to transfer multiple assets but you must create the new assets first. ABUMN will transfer and create new asset but only does one asset at a time.
There are hundreds of assets with postings to be transferred from the old asset classes to the corresponding new asset classes.
Appreciate whatever input you can provide.
Tara

download the asset master data(original) and create new asstes using lsmw or any third party tool also.

How transfer asset master balances

how transfer asset master balances. please explain details process.

Use ABUMN or
ABT1N
based on ur requirement.
for documentation.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/17/1d3c3934f18443e10000000a114084/frameset.htm
if open points please raise..
Regards
Anantha

Transfer assets from inventory to stock

hello all,
i want to transfer assets from cost center to store.
scenario is like this:-in dec 2010 we have taken the goods recipt of ABC capital material.after this we make assets belongs to this material, then asset is iisued to cost center from store.when the material goes to cost center abc material goes to depriciation of 10000 each month.now in july month we want to transfer back this asset to inventory(store) but cost of that inventory must be increased after depriciation.
pls reply asap
thanx in advance for sharing knowledge.
regards
simran

ok

Transfer assets between accounting center

HI,
IS ABLE TO TRANSFER ASSET FROM ONE COST CENTER TO ANOTHER
Ramakrishna

Hi,
Yes its possible.
Tr.Code :ABF1 or ABT1N
but it requires the proper G/L accounts , so check with your FI consultant.
Regards
Rahim

Transfer Asset Under Construction

Dear Forum members:
We want to transfer an asset from one Cocode to another due to settlement under the wrong Cocode. Is it possible to transfer Asset under construction from one company code to another. So far, tests carried out with abt1n have been futile.
What factors need to be considered before hand in carrying out an intercompany asset transfer?

HI,
Provide another settlement rule for the Order for which asset you want to transfer balances from AUC and made settlement run again.
Murali

Intercompany transfer asset with NBV 1 and zero

Can SAP R/3 system do the transaction intercompany transfer asset with
NBV 1 and zero value?
Beside, can SAP R/3 system perform creation of asset with NBV 0 and 1?

Firstly, had try to create the new asset by T-code AS01 but i need to provide the depreciation period with zero value as the asset is fully depreciated with zero life depreciation. However, system do not allow for input zero depreciation period in the new asset. Kind advice, any configuration need to been set ?
Secondly, I had try using the ABT1N to do the transfer of asset however it prompt me for entering the intercompany account need to setup? Kindly advise using ABT1N do we need to setup the intercompany clearing account? What are the double entry inccur/impact by using ABT1N to transfer asset?
For your information, due to the lack of knowledge using ABT1N. We had try to do the manual retirement of asset and manual creation asset and posting the asset using t-code F-02 as mention prevouis question.
I hope to know how to solve in both method to rectify the problem more effectively.

How to transfer asset?

Hi FI Experts,
I'm trying to transfer asset from one to another during LAE process. Could anybody help me?
Can I use any of the following FMs? If any of the following can be used, please`provide me the parameters details to be passed.
LAFA_ASSETS_TRANSFER
LAFA_ASSETS_TRANSFER_PREPARE
LAFA_ASSETS_ON_TRANS_ACQUIRE
LAFA_ASSETS_ON_TRANS_RETIRE
LAFA_ASSETS_RETIRE_ON_TRANSFER
Regards,
Ravi

Hi,
You should use BAPI:
BAPI_ACC_***_TRANSFER_POST
Regards,
Eli

Transfer assets from one asset class to another having different depreciation keys.

Hi Gurus,
     I am a noob in FICO, and I am facing a problem while transferring assets from one asset class to another.
Below is the scenario.
I created two assets 100000000000-0 under asset class 4690a and 200000000000-0 under asset class 4690b. And I am trying to transfer the
asset from class 4690b to 4690a by selecting the option ‘New Asset’ in the transaction ABUMN. While doing this, I am receiving an error message as below.
'Posting with trans. type 300 not possible (No acquisition posted).'
     Message No. AA324.
Diagnosis:
     Transaction type 300 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure:
     Use a transaction type from a transactio type group, which can be used for the first acquisition to an asset.
The error is related to the transaction type which I hadn’t explicitly created anywhere. But, when checked in transaction AO76, the transaction type 300 belongs to the transaction type group 30. In this group I am not able to find any solution related to the error.
Moreover, in some of the threads in SCN, I read that modifying the transaction type group might lead to something fatal.
Kindly help me in the below.
1. What exactly the error message is related with?
2. Is there any other method to transfer the asset to another class?
Please let me know if any further details are required regarding the scenario.

Hi ,
I understand that you want to transfer the old asset to new asset with different asset class with different depreciation keys and the old asset is not yet capitalized and does not have any Asset Values.
Assuming that since the First Asset is not yet capitalized, that seems to be that its just that ASset Master is created and no Asset Values appear in the Asset.(in other words no acquisition, capitalization, no dep. start etc.)..
Alternatively this asset can be advised to be blocked and flagged for deletion and create a new Asset in the new Asset Class and then capitalize the new asset by doing the acquisition according to the business process i.e. either via PO based process(GR) or Non PO based process.
The transfer of asset is required incase the old asset still have the values and you are transferring the old asset to new one with the left over values.
Also would request you to kindly share some screenshots of the AW01n of the old asset and screenshots of the AS03 to have more idea on it and provide a better solution to the same..
Warm Regards,
Vineet

ABUMN: Transfer asset value to components (IFRS)

Dear Experts,
My client wanted to segregate assets as components and transfer amounts from main asset to sub assets through ABUMN, but these values should appear only in Dep area 75 (for IFRS purpose). Client also wanted to have
Ex: Main asset No 100002 - 0; amount is 10,000/-
Sub assets 100002-1; amount is 5000/-
100002-2 5000/-
Can anyone guide me how to procedure

y

Transfer asset from on class to other class without changeing asset no.

Dear All,
I have a requirement.
I want to transfer some assets from one asset class to other asset class, but I do not want to change the asset no.
Can you help me
b.s.rao

Hi,
This is not possible.
Pankaj,
Your solution will not work, as you cannot maintain the same number series for both sending and receiving asset classes, even though if one is having internal number assignment and another is external number assignment.
Ex: You cannot have 2 number range objects which includes a one asset number. In AS08 system will never accept this overlapping of asset number series.
Correct me if i am wrong...
Thanks,
Srinu

Transfer Asset from Non Depreciating Asset Class to Depreciating Asset Clas

We use the fixed asset subledger to maintain patents and patent applications. The patent applications do not amortize. How do I transfer from the patent application class to the patent class which will begin to amortize?

Hi, it can be done in accordance with your bs requirements, it's the same like transfer from auc to asset

Transfer asset within cocd.

Similar Messages

Maybe you are looking for