Transfer rules sourse system assignment change

Hi,
XAD -- Global APO system
AAD -- America APO system
GBD - Global BW system
ABD - America BW syste,
I transported, TR,Comm STru, UR from XAD to AAD
In XAD TR,Comm Str,UR pointed to GBD,
where as now i need TR,Comm Str,UR to point to ABD
when i double clieck the transported Transfer rules in AAD, i am getting error GBD doesnt exist
BDLS doesnt work here as ABD is already created in AAD
Looking for experts advise
Thanks
Praba

Hey. Do you have the system mappings maintained in AAD to convert GBD to ABD when transporting/importing updates? In the admin workbench it's just tools-conversion of logical system names. I'm guessing that's all it is. Have you ever transported from XAD to AAD? If not, I'm sure that's the issue.
Hope it's helped.

Similar Messages

Change Source System in Transfer Rules

Dear All,
I need to change the Source System assignment in Transfer Rule from System "A" to System "B", as the System "A" no longer exists.
I came across the T-Codes BDLS/BDLSS but aint sure if this can help me rectify the issue.
Request you to please provide some inputs.
Regards,
Nitin S.

Hi
if you change the source system you may face the problem.
first you can replicate the Dat sources on B, then you can map the info source with your respective data source.
else it will not allow you for thr mapping.
Regards,
chandra.

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Transfer Rules (Field position changes)

In the Transfer Rules how can i change the position of the fields? I want a certain field to be on top and so on.

Hi,
Add the fields to the communication structure and then make the transfer rules
add as per ur convenience and then mapping will be done in the order given by you in the comm structure
thanks
puneet

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

2LIS_02_SCL Transfer Rules are missing

Good Morning everyone, I recently activated BI Content (7.05 SP4) in BW (7.02 SP8) for infocube 0PUR_C01, and I can not see the transfer rules for 2LIS_02_SCL, what can I do?

Juan Orozco wrote:
I did install BC for 2LIS_02_SCL Transfer Rule (ISMP) again with options "In data flow before and afterwards", I got the right flow of objects from 2LIS_02_SCL ECC datasource to 0PUR_C01 Infocube in BW installed, but the Transfer Rule 2LIS_02_SCL status is Modified(Saved), when I try to activate this Transfer Rule, the system send the message "There is no PSA for InfoSource 2LIS_02_SCL_DA and source system LOGSYS120", what can I do?
Case A. RS_TRANSTRU_ACTIVATE_ALL
Case B. Give the tech name of the CLNT120 & generate it. RSDS_DATASOURCE_ACTIVATE_ALL
Case C. Replicate the datasource after adding/deleting fields in R/3. Right-click on this datasource and select 'replicate metadata' again. Activate using FM in Case A.
Edited by: Arun Bala G on Feb 16, 2012 9:29 PM

BE3.5 : Error from the source system while activating the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers!

Transfer rules to the new source system not visible in Transport connection

Dear All,
Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I have also collected them in a Transport request.
Now when I am checking the entire flow in Transport connection, it shows me the transfer rules pointing to the old system only. That is, in RSA1 it shows the new system assignment. But in Transport connection not.
What I have to do so that I can crosscheck in Transport connection all my objects having transfer rules to new system ?
Regards,
Srinivas

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

Activating transfer rules for new source system

Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
Sujai

Hi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V

Assign master data attribute value to Time Infoobject in Transfer Rule Rout

Hi Experts,
I want to assign value for Time Infoobject ZTIME from a Master data Infoobject's attr. The value for this ZTIME exists as an attr of Infooject ZMMM. I want to do at Transfer Structure level so that the assigned value can be used for another calculation in the update rule..
Any help on the routine is highly appreciated.
Thanks,
DV

Hi Edwin,
After making the changes as u suggested, i tried to activate the transfer rule, but Iam getting the following eerror msg
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        6,083
Message:    Statement is not accessible.
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
How can Iresolve this?/ Why is this happening??
DV
Any Help???
null

CLIENT of the source system in the Transfer Rules

Hi,
Can I get the CLIENT of the source system dynamically in the Transfer Rules (and assign it to an InfoObject)?
I have a generic extractor from a R/3 source system. The table in the source system & the extract structure the DataSource both contain MANDT, but its not coming in the RSO2 screen (which, if I'm not wrong, is how it should be).
I need the CLIENT info. in my BW data targets. I do not want to hardcode this value in Trans Rules as the client in Dev & Prod is different for my R/3 sys.
If I can't get it directly from the DataSource, is there any way I can get it from any system field using routine?
If I'm not wrong - SYST-MANDT in the Formulas will give me only my BW CLIENT.
Thanks in advance for your help.
Regards,
Melwyn

hi,
i think if your bw dev and prod client is different you can try in transfer rules
if sy-mandt = xxx. ( bw dev client number)
result = 'yyy'. (source system dev)
else.
result = 'zzz'. (source system prod)
endif.
or enhance the extract structure/ append structure with zz field for mandt and field in user exit zxrsau01 with sy-mandt
or if use infoobject 0LOGSYS, populate in transfer rules with result = g_s_minfo-logsys.
hope this helps.

Source System Assignment in Update rules

Hello Friends,
Good Day....
I need to extract both transaction data and master data from four different source systems and the data is also different from one soure system to another system.
In BW iam using same infoobjects and the transfer rules,update rules and the datatargets are different. so how can i differentiate data from one system to another system with the same info objects.
where can i do the code can we do that in update routines?
or do we need to do compounding?
sorry friends if i am asking an easy question got confused here....please let me know if any solution.
Regards,
Ala.

Ala,
You could use the client number as a key field / dimension to uniquely identify the records , als you can look out for this info Object called LOGSYS whish if present will get updated by the logical system name or have an infoobject for the same and since your transfer rules will be different for each , have the IOBJ populated by a constant depending on the client and then update the data to the data targets , that should solve your problem.
Hope it helps..
Arun
Assign points if helpful

Transfer Rules is not Activated in BWQ System

Hey all,
I am transporting the Infocubes from BWD to BWQ. I got an error in "errors occured during post-handling RS_After_Import for ISCS L" and "the errors affect the following components: BW-WHM (Warehouse Management)"
I had assign the "conversion of logical systems names" in BWD and BWQ.
The detailed error can be viewed under this path:
http://h1.ripway.com/aywen/TransferRulesDeactivatedinBWQ.zip
thanks...

Hi,
Just check the connection parameters between BWQ and the source system. If it is ok then Replicate the data sources bfore activating the transfer rules.
Still the problem exists try this functional module in SE38 to activate the transfer rules: RS_TRANSTRU_ACTIVATE_ALL
Hope this will help you.
Rgs,
I.R.K

Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Restore transfer rules after source system deletion

Hello,
due to several reasons I had to cut source system assignment.
The source system is now new connected to BW.
My transfer rules and datasources are lost.
Is there a programm, t-code, ....available to restore that stuff?
Points will be assigned.
Best regards.
Pascal

Hello,
Just go to transaction rsa13 right-click over your source system and choose "Restore"
Diogo.

Transfer rules sourse system assignment change

Similar Messages

Maybe you are looking for