Transport cancelled with exc eption system_no_roll

We are facing an issue while trying to transport the enhancements for an ODS along withInfo source, Xfer rules, Update rules The transport goes success in Quality , but is Cancelled with RC = 12 , in Prod . The transfer rules are inactive and update rules though active do not have the enhanced fields.
Since the rc is 12 it does'nt seem to be an issue with the request creation / collection of objects. This has happened twice. Looking at the transport log seems indicates a runtime exception 'SYSTEM_NO_ROLL' occured because of unavailability of main memory .(???)
Has anyone experienced this issue and can provide suggestions?

Arun,
please refer:
Note 993511 - SYSTEM_NO_ROLL dump during transport of updaterule
Summary
Symptom
During the transport of updaterules, sometimes the after import methods dump with SYSTEM_NO_ROLL.
Other terms
Updaterule , Transport , SYSTEM_NO_ROLL
Reason and Prerequisites
Program Error
Solution
You can apply the following corerction instructions, or in urgent cases
you can also apply the advance corerction attached to the note.
NOTE: The correction involves changes in the interface of CL_RSAU_UPDR.
Before applying the correction using SNOTE, you need to create an
Instance Method FREE in the class CL_RSAU_UPDR and save/activate it.
From transaction SNOTE you can apply the advace correction which
will then copy the source code of method FREE.
BW3.0B / BW3.1C (Content)
           Please use the correction instructions of this note. For the time being, we won't deliver any Support Packages for the BW Releases 3.0B and 3.1C (Content)
BW 3.50
           Import Support Package 20 for Release 3.50 (BW3.50 Patch 20 or SAPKW35020) into your BW system. The Support Package will be available when note 0986891 with the short text "SAPBWNews BW SP20 NetWeaver'04 Stack 20", describing this Support Package in more detail, is released for customers.
BW 7.0
           Import Support Package 11 for Release 7.0 (BW7.0 Patch 11 or SAPKW70011) into your BW system. The Support Package will be available when note 0914305 with the short text "SAPBWNews BW 7.0 SP11", describing this Support Package in more detail, is released for customers.
This note may already be available before the Support Package is released. However, the short text will still contain the words "preliminary version" in this case.
Arun
Assign points if useful

Similar Messages

Transport failed with Return code 12

Hi all;
We have some Objects which are transported from Dev to QA, during that time we got error return code 8, we debuged the errors and found that 2 query elements were missing..which we ignored and transported the request to another system which is a clone of our production system. It happened the same error during the transport. Now, we are transporting the request into Prod from and the transport got cancelled with error code '12', we are trying to find the error details it says
' serious error occurred which normally is not caused by the contents of the request.'
Please let me know what would be the problem here and how can I resolve this issue.
Thank you in advance..with full points.

hi,
1. error code 12 can be connection between systems problem so maybe just try to transport it again
2. code 8 is not a warning it is error and means that transport was unsuccesful so try to perform this transport again (include missing objects, or create request with all necessary objects) and then try to transport on clone system
Regards,
Andrzej

Error while transporting infospoke with BADI in BW7.0

Hi:
We have an infospoke with Transformation ( ie with BADI) in BI7.0.
While transporting to Quality box it gives error.
"Transfer structure /BIC/CZZTXXXXX3 could not be generated
Error when activating InfoSpoke ZTXXXXX3.
Message no. RSOH010 "
Could you please help in rectifying the error.
PS: we tried transporting BADI first and then the infosoke but still its failing.
Regards!
Saniya

Hi
Check the forum link below
Transport Problems with Spokes that have BADIs
Thanks

Background Job cancelling with error Data does not match the job definition

Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time     Message text                                                                       Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
Please help me in resolving this issue.
Thanks in advance,
Sai.

hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode.

Document control failed due to error in [DOCMGR-CANCEL] with a return code

i am getting this error while calceling the purchase order "Document control failed due to error in [DOCMGR-CANCEL] with a return code of [OTHER]. "
I am doing the calcel like this
Nav: buyer work centre --> order
searche the po and then
select order --> cancel then click GO button
i gave the Reason as Cancel
communication method: email
Cancel Requisition: Yes
Please help on this, its urgent.
Thanks,
Vijay.

Hi Vijay,
Check this MOS note.
Cancelling A Standard Purchase Order In Buyer Work Center Results In Error [Docmgr-Cancel] With A Return Code [ID 1338826.1]
Thanks
-Arif.

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

MIGO vs MB1a - cancellation with reference to order

Folks,
Within MB1A we have the option to make a cancellation with reference to order by going into the menu in the selection screen:
Goods issue / Cancel with reference / To order.
This allows the user to only cancel issues for those items that were initially issued on the order. I was trying to find the same logic in MIGO but I cant find it. Customizing also only shows Material document as reference document for cancellations. We cannot add another reference document, or can we?
Thanks,
MZ

Hi,
MIGO is the enjoy transaction can be used for GR,GI and CANCELLATION. If you want to cancell with reference to order, that order might be partially completed, still delivery need to done on this, to which quantity in order you will post cacellation. Hence SAP system proposed to refer materila document as a reference for cancellation. With that reference the items which are issued or received can be cancelled exactly (quantity and amount)
In MB1A :It is purely related to GI and refer the order
Hence in standard SAP in MIGO, you cannot have option of order as reference for cancellation. I hope it will help you. Thanking you.

Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION

Dear Experts,
Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION. Below are the details of runtime error.
Category
ABAP Programming Error
Runtime Errors
UNCAUGHT_EXCEPTION
Except.
CX_UJA_ADMIN_ERROR
ABAP Program
CL_UJA_MD_QUERY_OPT===========CP
Application Component EPM-BPC-NW-ADM
Date and Time
02.08.2014 23:35:46
I am unable to find related note and solution for the same. any help would be much appreciated.
Thanks,
Akbar.

Hi Akbar,
I believe this issue is coming up in BPC.
But could you please provide some more detailed information like when exactly(after performing which step) is this error occurring?
BR
Prabhith

Transfer Requirement for Movement Type 262 (Cancel With Ref to Reservation)

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 (Cancel With Reference to reservation) ?
When i execute a movement type 262 (Cancel with reference to Order), the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Transport Table with Data from Development to Quality

Hi
Requirement:
Transporting Table with Values from Development to Quality System.
I have a Z* - table, appended one field at the end.
I need to transport data along with the table structure from Development System to Quality System.
In Development System, I have assigned the Transport request in Client 100(We can't add data to the table in this client).
What needs to be done to migrate the new table structure with Values.
Thanks in Advance
Regards,
Baburaj
NOTE: the requirement is to transport table and table entries through a transport request.
There should not be any manual update for the table in the target System (Quality System).

Check the delivery class assigned to the table. Please see the documentation
Delivery class
    The delivery class controls the transport of table data when installing
    or upgrading, in a client copy and when transporting between customer
    systems. The delivery class is also used in the extended table
    maintenance.
    There are the following delivery classes:
    o   A: Application table (master and transaction data).
    o   C: Customer table, data is maintained by the customer only.
    o   L: Table for storing temporary data.
    o   G: Customer table, SAP may insert new data records, but may not
        overwrite or delete existing data records. The customer namespace
        must be defined in table TRESC. (Use Report RDDKOR54 here).
    o   E: System table with its own namespaces for customer entries. The
customer namespace must be defined in table TRESC. (Use Report
RDDKOR54 here.)
S: System table, data changes have the same status as program
changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG,
R3TR TABL, etc.).
or during client copy
the data of client-specific tables is copied.
Classes C, G, E, S: The data records of the table are copied to the
target client.
Classes W, L: The data records of the table are not copied to the
target client.
Class A: Data records are only copied to the target client if
explicitly requested (parameter option). Normally it does not make
sense to transport such data, but is supported to permit you to copy
an entire client environment.
or during installation, upgrade and language import
behavior differs here for client-specific and cross-client tables.
nt-specific tables
Classes A and C: Data is only imported into client 000. Existing
data records are overwritten.
Classes E, S and W: Data is imported into all clients. Existing data
records are overwritten.
Class G: Existing data records are overwritten in client 000. In all
other clients, new data records are inserted, but existing data
records are not overwritten.
Class L: No data is imported.
Cross-client tables
o   Classes A, L and C: No data is imported.
o   Classes E, S, and W: Data is imported. Exisitng data records with
     the same key are overwritten.
o   Classe G: Data records that do not exist are inserted, but existing
     data records are not overwritten.
ehavior during transport between customer systems
Data records of tables of delivery class L are not imported into the
target system. Data records of tables of delivery classes A, C, E, G, S
and W are imported into the target system (this is done for the target
client specified in the transport for client-specific tables).
se of the delivery class in the extended table maintenance
The delivery class is also analyzed in the extended table maintenance
(SM30). The maintenance interface generated for a table makes the
following checks:
o   You cannot transport the entered data with the transport link of the
    generated maintenance interface for tables of delivery classes W and
    L.
o   When you enter data, there is a check if this data violates the
    namespace defined for the table in table TRESC. If the data violates
    the namespace, the input is rejected.
Thanks,

How to create transport request with Transaction Code

hi,
i have made a Report and then i have transport it to QAS server but mistakenly i transport the request without T-Code.
Now i want to make a new transport request with T-Code but can't understand where i can make this new request because when i go to this path*UTILITIES -> VERSION MANAGEMENT -> * it shows me the request which i have transport it.So i want to make a new request with Transaction Code included in that request.Kindly guide me where i can make this request.
Thanks.

hi,
Goto se93 give your tcode and press chagne,after entering into it make some change and click on save, it wil ask for TR. Save it and export it to quality.
Regards
harris

Job SM:EXEC SERVICES gets cancelled with SYNTAX_ERROR

Hi,
The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
Syntax error in program "RDSVASAEA_ROOT_____________050 ".
I performed a syntax check on the program in the ABAP Editor and it gives the following result :
Field "BDLDLTRHOSTS001030" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Can you let me know, how to solve this problem.
My system is SolMan 4.0 SP 15 on Win 2003 with Oracle 10.2.
ST-SER and ST-ICO are with the latest support pkg level,
Regards,
Anil.

These steps can be done easier as of Support Package Stack 15:
>
Amit Devale wrote:
> Step 1:
> Run report BDL_DELETE_ALL_TABLES via SE38 to delete all entries
> in the service definition tables
>
> Step 2:
> Execute a 'Refresh service definitions' task session in transaction
> SDCCN ->Task ->Create ->'Refresh service definitions'
>
> Step 3:
> Execute in transaction SE37 the function module "BDL_GENERATE_LOGFUNC
> _INCLUDES" and enter the value "ALL" in the 'OPTION' field.
Hi Amit,
Support Package Stack 15 of SAP Solution Manager does contain an update of SDCCN (shipped within ST-PI 2005_1_700 SP06.
[SAP Note 727998|www.service.sap.com/sap/support/notes/727998]
This offers an easy way to update the service definitions and to generate the logfunc Includes.
Step 0: Ensure that optimizer statistics exist for table D010INC.
Step 1-3 :You can use functionality in SDCCN to execute these steps.
Perform:
- Path: SDCCN -> Utilities -> Maintain Service Definitions
- Select 'Delete and Replace Service Definitions -> Confirm this selection
- Confirm that you want to delete the definitions
- Confirm that a new task 'Service Definition Refresh' was created
(Take a note of the task id -> Review the log for this task id when it is completed)
You should not not see any errors for either the update of a Service Definitions table or the generation of any re-import include.
Best regards,
Ruediger
P.S.: Great, that you start to share your rich experience here in SDN.

SAP_CCMS_MONI_BATCH_DP getting cancelled with error in program SAPLSPFL

Hi Experts,
The job SAP_CCMS_MONI_BATCH_DP scheduled by user DDIC is getting cancelled everyday at 20:00 CET (system time).
The reason for the job getting cancelled with the runtime error Syntax error in program SAPLSPFL and a short dump is generated.
Runtime Errors         SYNTAX_ERROR
Date and Time          07.03.2012 20:24:50
Short text
    Syntax error in program "SAPLSPFL ".
As per instructions I did syntax check for Program SAPLSPFL . It shows syntactical error as shown below.
The following syntax error occurred in program "SAPLSPFL " in include "LSPFLF07
" in
line 148:
"Bei PERFORM bzw. CALL FUNCTION "SET_DIRVALUE" ist der Aktualparameter "
""DIR_VALUES-DIR_ROLL" zum Formalparameter "DIR_VALUE" inkompatibel."
Please help me on this.

hi
check out this SAP Note
1000897 RZ10 profile import: Maximum path length is 60 characters

No article document could be found for cancellation" with Message no. VL622

Hi Experts
when I am Reverse the goods movement( for delivery cancel ) in VL09 I am getting error "No article document could be found for cancellation" with Message no. VL622.
I am unable to delete the delivery and the delivery is not allowing me to do GR also, while In warding (GR)
I am getting error "PL Stock in transit exceeded by 56 EA : 300387450 0611 10" Message no. M7022
even though PGI is finished for Delivery, stock is not reduced. It is still showing in supplying site only
Kindly help me out to delete the delivery or to do the GR.
Regards
sudha

Pls refer sap notes 331758

Cancellation with strings attached - no refunds yet

Hello forum,
Sorry if this is not the right place to post it, but I couldn't find any other that could fit better.
Anyway, here's the issue... I had a big problem with the Apple Store (Mexico). I have bought the MacBook Pro 13', the one that costs ~1200 dollars. However, some hours later, I found out that there was an Apple retailer in the city I live on, with MacBook Pros on stock and with the same price of the online Apple Store. What did I do? I canceled the order and went straight to this retailer the next day.
Arriving there, I happily got my credit-card and handed it to the guy -- I was very excited to put my hands on my new MacBook Pro -- then, the guy returned saying that my transaction was declined. What...? I did have funds for that, what the **** happened?
The thing is: When you buy something through the apple store, they don't capture the money, but the credit gets "reserved" for apple, waiting for their sign to capture it.
When you receive the whole product, they do capture the funds, and then you get charged on your next cc bill. However, when you cancel your order, *they don't sign the gatway/bank that they could release the funds back to the credit-card limit*. Nice uh?
I then called apple. They say I have to call my bank. I called my bank. They say the funds will be back in 8 days (if the merchant doesn't give any sign of life in n days (n depends on the bank) the funds are automatically backported to your cc again) or that it could be back earlier if the merchant contacts the bank to do so.
However, apple won't do it. The attendees will just say "Contact your bank".
This is really "cancellation with string attached". Unfortunately, nobody could help me, and shame on Apple, who didn't really care on helping me solving this "small" detail.
And here I am... 8 days to go
Marcelo.

Thank you for the replies, folks.
There are two things that really disappointed me:
- I had no idea it would happen. If there was a warning or something before canceling, I would probably not have canceled and let the order go (*I would have my mac by now*).
- Apple won't help in any way. They just say "Call your bank". What's that for such an innovative company, couldn't they invest more in creating a more complete and customer-focused process here?
@RedHagen: The situation is a little bit complicated for me. I'm not Mexican, I'm just staying here for some months, and I happened to buy through the Mexican Store. My bank is from Brazil, so, I'm not sure on how I could do this right now, but that's something I'll keep in mind, even though I don't think my country has such open access to the authorities as your country does :S
In the end, I guess it would be just a matter of Apple implementing another step in this process: Of notifying the bank (probably through the cc gateway) that the credit can be released back.
Thank you all for hearing me
Marcelo.
Message was edited by: celoserpa
Message was edited by: celoserpa

Transport cancelled with exc eption system_no_roll

Similar Messages

Maybe you are looking for