Transport SLD components

Hello,
We are planning to move the SLD objects from local SLD  to Central SLD ( Production ) .
Kindly suggest if I need to create product and swcv directly in central SLD or how can I move from local SLD.
Kindly suggest the steps to deploy the local sld to central sld.
Thanks

Hi ,
in order to move the local SLD existing on PI System to another SLD(central) follow the below steps have to do the following steps.
1- Install Central SLD on the
2- Apply note 939592 for movement of local SLD Configurations to CENTRAL SLD System, installed in the above step 1.
The note 720717 talks about reduction of SLDs, but does not speak about how to install Central SLD and then move the local SLD to this newly installed Central SLD.
you will probably need to export the SLD content from the source SLD to import into your target central SLD....
Exporting and Backing Up Your SLD Information check the link below
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/b7bbe3e2c0356be10000000a421937/frameset.htm
Regards,
Naveen

Similar Messages

  • Exception in CMS when transporting the Components in the assembly stage

    Hi,
    I am getting the following exception in CMS when transporting the Components in the assembly stage:
    com.sap.cms.tcs.interfaces.exceptions.TCSFileCreateException: cannot create file:*****.sca Error adding file *****/pr_deployarchivedr/TestDc.sda to archive.
    File was already added before.
    Any pointers to resolve the exception will be helpful.
    Regards.
    Rajat

    Hi Rajat,
    two things causes this type of error.
    1) Check whether the systems are in SYNC or not(patch level, versions).
    2)Check whether the dependencies are transported or not to assemble tab.
    Regards,
    Anil.

  • Transport SLD & XCM configuration

    Hello,
    Can we transport SLD & XCM configuration from one system to another.
    If yes what is the prcedure for the transport.
    Regards
    Deb
    [points guranteed for helpful answers]

    you have to create external alias and point that to your actual SICF service. make all configurations in the external alias and transport the same.
    http://help.sap.com/saphelp_nw04/helpdata/en/78/9852bdc06b11d4ad310000e83539c3/frameset.htm
    Regards
    Raja

  • Transporting SLD objects from DEV to PROD

    Hi,
       I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
    Thanks!!
    Regards,
    Miten.

    Hi,
    How to handle SLD for Tranporting Dev to Quality ser
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    Transporting XI from DEV to QA
    Transporting XI from DEV to QA
    using CMS system. in XI
    1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
    5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content  .htm --> Configuring Groups and Transport Targets
    Look into this blog for how to export / improt IR and ID objects,
    /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
    http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
    /people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
    http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
    http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Re: Moving project from Dev to QA
    Error while exporting/transporting the Business system from Dev to Quality
    Transporting the scenario frm Dev Server to PRD Server
    transporting data from Dev to quality  using CMS
    Regards,
    Phani
    Reward points if Helpful

  • CTS+ configuration in PI 7.4 to transport SLD specific data

    Hello Guys,
    I am doing CTS+ configuration for PI System SLD Vesrion 7.4 to transport J2ee as well as SLD specific data through transports. My CTS server is Solman System.
    I have created a CTS user in Solman System and in PI NWA I have defined destination to point to Solman System. But i am running into several errors.
    Could anyone please help me what user authorization are required for CTS user in Solman to transfer Non-Abap Data and SLD specific data through transports.
    Its very urgent.

    Hi Bharatram,
    Apply the below roles to the user
    SAP_XI_CMS_SERV_USER
    SAP_XI_DEVELOPER_J2EE
    SAP_XI_CONFIGURATOR_J2ee
    and refer the below blog
    CTS+ Configuration for Process Orchestration (PI/PO) and AEX 7.31 (JAVA Only Stack)
    regards,
    Harish

  • About SLD components

    1. What is a product?
    2. What is a system component?
    3. what is a Technical System?
    4. What is a Business System?
    could u brief about all of them?
    and SXMB_IFR components also like SLD, Integration Builder and Monitoring...

    Hi,
    Software Component: Represents a collection of all versions of a software component.Software components represent the reusable modules of a product. They can beupgraded or have patches installed.
    Software Component Version: Represents a particular version of a software
    component.
    All design works in IR is organized by Software Component Version. This make sense, as interfaces logically belongs to a software component and to a particular version. Before development can begin, the software component versions(SWCVs) must be imported from the SLD to IR.
    Product:
    A software product is composed of one or more software components.
    It represents a collection of all versions of a product. A product is a unit that
    can be delivered, is visible to the customer, and that is installable and renewable.
    This will help you
    Just go thru following SAP link. for understanding of SLD objects.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    /people/naveen.kumarh/blog/2007/02/28/discovering-sld-part-1
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
    /people/naveen.kumarh/blog/2007/02/28/discovering-sld-part-2
    I hope this will help you..
    vasanth.

  • How to transport SAPUI5 components from ABAP repo

    Hi All,
    Please suggest me how can I move the SAPUI5(deployed in ABAP repo) apps from Dev system to QA .
    Thanks in advance
    Rajesh

    Hi Rajesh,
    once the SAPUI5 application is deployed to ABAP server, it is stored as BSP application under transport request (refer my blog How to Deploy and Run SAPUI5 application on ABAP Server for more details).
    You need to follow usual process of moving this TR to Quality and production.
    Regards,
    Chandra

  • Registration of PI components in SLD

    PI 7.0 server was setup successfully on wid 2003/oracle, after all the post configuration steps. Am not able to see the PI structures under technical systems -> exchange infrastructure in SLD. I can only see Adapter ENGINE, Integration server and Doamin, but not IR, ID, RWB.  .
    SLD is running on the same PI server.Exchange profile and all the related PI users and passwords are fine
    Have gone almost all the related threads in the forum, implemented teh note 1117249 but no luck.
    Requesting to experts to give me a roadmap to troubleshooting furhter.
    Thanks,
    Durga

    Hi Durga,
    I am not sure once the PI7.1 system will be ready by BASIS Team (with EHP1) with the required specificaiton ,what steps need to follow to configure the SLD components like SWCV,PRODUCTS etc?
    And who should perform the registration of PI component and if client doesnt know about the specification needed to PI components then who should provide this?
    Will it be responsibility of PI BASIS adminitstrator or Infrastrutre Management Guy?
    Thanks for help!!
    Pushkar

  • Transport of SLD-Systems from QA to PRD

    Hi,
    because we want to transport everything from QA-XI to PRD-XI we have to transport SLD-Systems as well. Therefore i tried to give some groups to the systems like QA and PRD group. I want to add the previously applied systems to these groups under Business-System-Integration, but it is not possible to use the combo-box for Group.
    How could i maintain the systems to there groups?! After this i would like to configure the transport!
    br Carsten
    P.S. we have PI 7.0

    Well there are some blogs which i found recently:
    <a href="/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation">XI Software Logistics 1 Transport Business Systems</a>
    <a href="/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview">XI Software Logistics 2 Overview</a>
    <a href="/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms">XI Software Logistics Solution 3 CMS</a>
    Perhaps make a new one or refer to these!
    br

  • Required clue regarding SLD transport

    Hi
    i have transport Technical system , Bussiness system from dev to QA by using the file transport
    the way i did  like
    i dev system i had created the TS  as well as BS with dev XI system intergration server
    again in dev system  i have created the TS and BS with QA XI system integration server.
    later i import the TS & BS into QA which were created with QA XI system integration server.
    after that i transport amy IR & ID objects . all are working fine .
    now i have to move to prod i followed the same fashon but  while creating the BS for prod i can bot found the PROD XI system intgration server.
    i tried in DEV as well as QA no luck .
    please how can i move to prod?
    thanks in advance.
    Edited by: maheshhhh on Nov 18, 2011 9:40 PM

    HI,
    You can transport SLD object via file transport .
    The blog discusses SLD Preparation
    XI Software Logistics 1: SLD Preparation
    This link talks about transport by CMS and File System
    XI Software Logistics II: Overview
    Check out this how to guide also
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808.
    you have to maintin different groups....one for DEV...one for QA....one for PROD
    regards,
    ganesh.

  • Error in importing SLD objects via file system

    Hi
    I am transporting XI Sld objects e.g. products, software components, technical, business systems from dev to cons. I have cms in place but i need to prepare SLD objects before transporting ID objects. My dev is on SP 15 and Cons on SP 10..While transporting SLD product using file system i got following error:
    The target namespace for the special import already contains data for one or more export lines. Continuing this import may corrupt the state of your data.
    I have tried importing SLD objects between two SLDs of SP10 also..but same error came
    Plz..help
    thnx in advance!!
    Abhijeet Jangam

    Hi,
    <i>My dev is on SP 15 and Cons on SP 10..While transporting SLD product using file system i got following error:
    </i>
    See SAP Note 832142 for known restrictions about transporting objects between
    different XI 3.0 support packages And See SAP Note 834507 for known restrictions about cross-release transports.
    Also see the CMS Guide at market place, how to guide,
    https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700003090422005E
    Also refer 780297 for continiuosly updated errors.
    May be all this will help you to analyse if not directly arrive at the solution.
    All the best,
    Anirban.

  • Defining an SLD Strategy for XI Migration using CMS

    Can the following scenario occur?  Please explain if any of my assumption are incorrect.
    -> An XI DEV, QA, and PRD environments each with a separate "slave" SLD.
    -> A separate "master" SLD that contains all XI dimensions (i.e. transport, solution, and technical).
    -> This "master" SLD will deploy all relevant SLD components (Products (versions), SC (versions), Technical Systems, and Business Systems) to the specified SLD "slave" environment.  For instance, the master SLD will provide only DEV SLD components to the DEV "slave" SLD specific instance.  No QA or PRD SLD relevant components will be stored on the DEV "slave" SLD. 
    -> All Integration Repository (IR) and Integration Directory (ID) objects will be exported from DEV "slave" SLD and imported into the "master" SLD.
    -> All ID components will have transport targets defined in the master SLD for DEV to QA and QA to PRD, respectively.
    -> CMS will perform all transports from DEV to QA and from QA to PRD for both IR and ID components by defining "tracks" for specific SC and development configurations for each of the development states of an SC.

    The following scenario can occur.  That's what we're doing at our customer site.
    -The only thing is that you can import QA and PRD relevant components to DEV.  If you want to define the transport targets between the systems, then this information will need to be the individual SLDs (slave SLDs).
    I hope this helps.
    Regards,
    Jay Malla
    SAP XI Consultant
    Licensed To Code

  • Transport problem in Report Designer

    Hi,
    I have a Bex Report Designer report. But when I am transporting this object from Development to quality , the report comes with the following error.
    Please see below for errors.
    I can see the transport went well. I can open the same report in quality.
    when I am going to quality system and creating the same report it's working fine.
    Please let me know what I am doing wrong while transporting.
    Components 4823EL8W2XELE3W6RRSM1WQ7E (version A) do not exist on the database
    DP_1: Unable to load query 4823EL8W2XELE3W6RRSM1WQ7E
    Web Item Report error: Cannot access data provider 1 "DP_1"; it does not exist or cannot be read
    No access to the data provider or data provider does not exist
    Cannot access data provider 1 "DP_1"; it does not exist or cannot be read
    Check whether this data provider exists and can be read
    Contact your system administrator. This error was recorded
    Thanks,
    Panda

    Hi,
    Please check note 964823.If this does not resolve please check if Either your system is support package stack 7 or the role entry was saved before support package stack 8. In case your system is still on support package stack 7, please see note 935348.
    In any case, the role entry is broken and you need to delete the entry and store the entry again (either on SPS7 with the note applied or on SPS8).
    Rgds
    Manoj Kumar

  • SLD Configuaration in PI 7.0

    Hello Experts,
    In our Production PI system We did Install PI 7.0 , We have to Configure SLD now ...
    Can any one have SLD Configuaration Guide Step by Step in ABAP and JAVA side in PI 7.0
    Thanks &Regards
    Praveen

    Hi Praveen,
    Please go through the weblink given below for the configuration of SLD components.
    System Landscape Directory (SLD)
    Thanks,

  • Transporting OSS Notes from Dev to QA returns error

    Hi,
    I have implemented all these notes in Dev:
    1448397
    1453128
    1462423
    1465685
    1472991
    1478699
    1486208
    1490183
    1495277
    1512748
    1540869
    1550964
    1558355
    1564254
    1568563
    1575454
    I don't get any error during implementation in Dev.
    When transport to QA, it returns error like:
    Authorization check CP_USER_INCL:
    Navigation path 48469D158E5D0117E10000000A421694 does not exist
    Authorization check O_INCL_1:
    Navigation path 488D143E21166CB2E10000000A421693 does not exist
    Authorization check S_ALL_1:
    Errors occurred during post-handling ESH_OM_TRANSPORT_IMPORT for SEST L
    ESH_OM_TRANSPORT_IMPORT belongs to package S_ESH_ENG_OBJ_MOD_REP
    The errors affect the following components:
       BC-EIM-ESH (NetWeaver Enterprise Search)
    After the transport failed, I couldn't access ESH_COCKPIT anymore.
    It will return a dump saying:
    System with connection GUID xxx has no connection data.
    I tried to delete search connector via SE38 ESH_ADM_INDEX_ALL_SC also return the same error.
    Anyone experienced this before?
    I have already raised an OSS message to SAP waiting for their reply.
    Thanks
    Jack

    Quote from the OSS message:
    1457940 Transporting software components: Error in after-import
    1476894 Transporting software components: Paths are lost
    The reason for the error messages was a problem with the sequence
    of the handling of the involved entities like templates, authorization
    checks etc.
    I see no harm in implementing the following additionally
    1465481 Transporting software components: Dump in after import
    1441080 Termination when importing Enterprise Search models
    Regards
    Jack

Maybe you are looking for

  • How to prevent caching of Http Authentication

    Hello all, I'm having trouble with a custom wrapper for the URL object that I wrote which is to be run from a multi-threaded program. Basically what I have is an application server that interacts w/ native code through message queueing. As the applic

  • I am away from PC and want to upgrade to IOS 5 to view Olympics videos. How can I do this?

    I am away from PC and want to upgrade to IOS 5 to view Olympics videos. How can I do this?

  • BOM Question

    Hello Guru, I want to ask some more information with regards to BOM, since we would like to have develop a new report for a BOM. But there were three field i did not yet know where it was been maintained in the BOM, never been seen values of it when

  • Generic master data update

    hi all, i have created a generic data source on Z table in r/3, replicate in BW and generic data source is available in BW. i have created a infosource and want to do flexible upload into 0Material data target which is assign under Cross applicant co

  • Theme Music Does Not Play

    I have created a slideshow using one of the themes. I have added music to the slideshow using music from my iTunes. The iTunes library is on my Macbook drive but the music files are stored on an external drive. If I close iPhoto and reopen it, the sl