Transports reversal..

Hi,
I would like to know if we do a sequence bulk transport request and later on if there is any problem during transport..
We would like how to do the reversal of the Transports and will there be any impact in such case..
Regds,
Satyanarayana .

Hello Satya,
If the bulk transport is to production then normally you would have tested this in some test system. Now these transports would be sitting in your production import buffer in the same sequence as they were imported to quality. Now if the trnsports to quality were successful and testing was also successful then you can be assured that the sequence is already correctly set in production unless of course you are using QA approval and have already approved some transports out of sequence. If nothing of this sort is done sequence will be taken care of by SAP.
However if transports are yet to be released and you are nnot sure abt the release sequence and the number of transports is not very large and say around 10-20 then may to be you can create a new transport (workbench) and merge the object list of the the orginal transport in this new transport and move the single new transport.
Regards.
Ruchit.

Similar Messages

RSA1 query transport reversal

in RSA1, I select some reports developed by query designer, after that, the report is moved to collected objects, but now I realized that I have selected the wrong query, how to reverse? i.e. move query from right pane(collected objects)l to left panel?
also every time I select a query, the info-provider /infocube /infoarea also moved to right panel, do we need to transport them besides query element? thanks

Hi,
If you have not given any transport req no to the wrong objects , then just close that window and open new RSA1 window.
Please note that if you have entered transport req no for the worng objects follow below steps:
For removing the Objects from Transport request :
1) Go to SE01 , give your transport req no , click on tools , click on unlock objects ,give your req no, come back to SE01 main screen , Double click your request ,Select All Objects and delete all rows.
For collecting only required objects :
1) Select Transport Connection -> Query - > Select Objects -> Slect your query - > once all the objects comes on right side , Select Display Mode - > List , Now you would see different objects related to that query ,
2) Now Left click on each type of object and select "Do Not transport any below"
3) For Query elements select "Transport all below"

How to reverse the transport from Production

Hi all,
by mistake I have transported the wrong order type to production. now I want to reverse it , how it can be done. my other question is what will be the effect if I directly delete that order type from production.
Regards
Kumar

Hello Akumar,
basically you have 2 options:
1) restore your system to a point in time just prior to the import of the request;
2) goto your DEV system, correct the order type change, create a new transport request and transport it to production. It'll overwrite the defective one. (you can also retrieve a previous version of this object via Version Management and create a change request from it)
It's highly not recommended to perform any kind of alteration directly on production (like deleting these orders) since you have a control mechanism (via TMS) to control de modifications and adjustments. Moreover you can have unpredictable behavior if this objects are used by other objects. Please don't do it to avoid making thins even worse.
I hope this helps.
Best regards,
Tomas Black

Transports: Best practice in reversing old transports not moved to PRD

Hello Guru's,
I have a lot of old transports moved from DEV to QAS that don't work or are irrelevant that need to be reversed. These transports were made by a consultant no longer with the company and there is no documentation of what was changed.
What is the best method in reversing these changes?
I appreciate your help!

Next time, don't ask for the best practice. You would likely get more response if you simply ask "What would you do..?"
Rob

How to reverse Transport requests from sand box to development client

Dear all,
I am doing some testing on Sand box, I made some transport requests from development to sandbox, which effected some settings in sandbox.
Now I want to reverse those transport request from sand box to development, unfortunately I didn't make any note of transport requests which I transported from Development to Sandbox.
Please educate me how to reverse transport requests from sand box to development.
your suggestions are highly appreciated
thank you
Venu Gopal

There is no reverse, you have to create a new transport with the original settings.
Programs keep track of their versions and are easier to pull a previous version, configuration can be tougher, open all the folders in SE10 to see if you can determine the configuration changes.

Reverse transport order

Is It possible to reverse a transport order that have been transported?

No. Can you explain what you are trying to do though?
Maybe others might have ideas based on your requirements.

Reversal of Transport

Hi ,
Can anybody let me know if there is any way of reversal of Transport request .
Actually due to some schedule job in the Rev trac ( transport tool ) around 150 transport requestsa are moved to produciton overnight .
I dont think any reversal of transprot is possible unless done manually by undoing the changes done by each transport .
If still there is any way , please let me know .
Thanks in advance.
Dhaval Raje.

Hi Raje,
There is no short cut unfortunately, you have to do it manually only.There is one more option, restoring previous day backup and recover till that time(before your transport moved). This way your data may go inconsistant and if your DB size is large, it's better not use this method.
Regards,
Hari.

How to reverse transport request

Hi Experts,
We transported some changes from quality to development. Now we realized that, we dont want those changes in Development.
Plz suggest me, Is there any procedure to reverse this transport request?
Thanx in advance.
Rgds,
Ram

Hi Reddy,
You can't Reverse transport request.
But there is a work around to get back your old changes or format.
For EX: if you have transported any infoobject or any cube .. there is a chance of getting back the old changes through the Version comparison.
http://help.sap.com/saphelp_nw70/helpdata/en/a9/7e2ae837e511d5b3bf0050dae02d7c/content.htm
Hope this Link helps you verymuch...
In the above it has clearly been mentioned on Version management.
Regards,
Ravi Kanth

Reversing transport request (Changes)

I have made changes to a program and transported to quality. Test has failed. How can i reverse all the changes in one go. Is there way to reverse the TR.
Thanks

Hi,
until yet reverse transports are not provided by SAP.
Sometime it is much manual work getting back to previous state.
You have to retrieve old version for each software component in the development system. For SAP Script there is no versioning at all!
Sometimes I prepare a reverse transport to face problems going live.
Additionally we built up a transport way from SAP live system to our development system. So we can bring systems in front of the live system closer to it. This is a good deal especially for the development system, which normally will not be renewed.
regards
Walter Habich

Reversing changes in a transport

Hi, is there a faster and easier way of reversing all the changes you have did under a particular transport?

Hi Evie,
I dont think standard SAP functionality has such facility. But FYI, at my client we use one software for our transport management which releases the transports for us and if we dont find the relevant changes then you can reverse the transport and changes gets reversed automatically.
Arti

Reverse transport request!!

Is it possible to backout/reverse or undo a SAP transport (change request) in the STMS / transport system?
regards
gunjan

Hi,
Just a thought. Can we not reimport the older version , i.e import transport request of the previous version, using STMS in the target system? This might probably overwrite the new code with old one!
Rgds,
HR
Message was edited by: Hema Rao

Stock Tranport Order - Reversal of Stock Transport Order in VMS

Dear All,
Cross Company Code Stock Tranport Order with delivery is created across company code & delivered.
Now we want to go for reversal of this.
We are using Vehicle Management System.
Is it possible? If so, pls let me know how to do it.
Expecting ur expertise on this.
Regards,
Ramesh

You can do reversal using VL09 if Goods Receipt at the receiving plant is not complete.
Other-wise cancel the GR then do VL09.
Thanks,
Ashish

Reverse transport of process chains ( Quality to Dev ) ?

HI all ,
i need to transport the process chains from Quality to development .
i have started collecting the process chains by using only necessary objects as grouping ,
here i am getting all the objcets like DTP , INfopakage , infoobjces , etc and Source system also .
i dont want to transport all the objests & just want to transport only process chains .
can any one plz tell me how to proceed with this .
Thanks ,
Edited by: BIuser on Dec 22, 2011 4:05 PM

Hi,
Please check the steps mentioned by Kamal,
Source system conversion after transport - RSA1->Tools->Conversion of Logical System Names.
Check the thread,
No Source system exist
Also in your case you are trying to move some objects from Quality to Development.
So kindly check with Basis also if they have maintained proper transport paths.
Regarding BDLS runs, during system copy one bw system will be copied on different BW system having different R3 system connection. In such cases basis does several BDLS runs where the target BW systems will have transformations of source BW system (source system). Once the basis completed BDLS runs the source system of source BW system will be changed to target source system in target BW system.
Please check with Basis if you are doing a system copy.
Thanks,
Vinod

Reverse Transport of object from Production to either Dev / Staging

Hi All
I have to modify one object (report writer - group F030) but the problem is that the object in Production does not match with that in Dev / Staging, I just want to know whether the object in Production can be transported in Dev / Staging so that I can modify it there and transport back to Production. Our basis expert is saying this is not possible and the transport route is one way?????
Thanks
Sameer

It is not possible and your basis expert is correct. Please see if you can just change the development object to match production first and then make the changes that you now want to apply.
I haven't worked on report writer, but check if there is version management and if you can do a version compare between production and development. Find the version that matches production, activate that version and then make the changes.

Transport import reversal

Hi,
I have faced a situation where I need to test whether a transport request import resolves the problem (obviously on sandbox ). Import does not resolve the problem, instead corrupts a ABAP program by introducing a refrence object that does not exist in ABAP dictionary.
My question - is anyone aware of a workaround for reverting the changes done by this import apart from restoring last backup or by checking versions of all objects that were imported in this transport request?
The answer can be very useful.
So who knows... -)
Regards,
Praveen

Hi,
You can revert your old changes by going to the Version Management option in Utilities Menu.
Or else you can also check SPAU transaction.
or else restore all the changes if you have an existing released request of the previous objects, if there download that request and again import into the system.
Please take back ups wherever needed.
Regards.

Transports reversal..

Similar Messages

Maybe you are looking for