Reversing transport request (Changes)

I have made changes to a program and transported to quality. Test has failed. How can i reverse all the changes in one go. Is there way to reverse the TR.
Thanks

Hi,
until yet reverse transports are not provided by SAP.
Sometime it is much manual work getting back to previous state.
You have to retrieve old version for each software component in the development system. For SAP Script there is no versioning at all!
Sometimes I prepare a reverse transport to face problems going live.
Additionally we built up a transport way from SAP live system to our development system. So we can bring systems in front of the live system closer to it. This is a good deal especially for the development system, which normally will not be renewed.
regards
Walter Habich

Similar Messages

  • How to reverse Transport requests from sand box to development client

    Dear all,
    I am doing some testing on Sand box, I made some transport requests from development to sandbox, which effected some settings in sandbox.
    Now I want to reverse those transport request from sand box to development, unfortunately I didn't make any note of transport requests which I transported from Development to Sandbox.
    Please educate me how to reverse transport requests from sand box to development.
    your suggestions are highly appreciated
    thank you
    Venu Gopal

    There is no reverse, you have to create a new transport with the original settings.
    Programs keep track of their versions and are easier to pull a previous version, configuration can be tougher, open all the folders in SE10 to see if you can determine the configuration changes.

  • How to reverse transport request

    Hi Experts,
    We transported some changes from quality to development. Now we realized that, we dont want those changes in Development.
    Plz suggest me, Is there any procedure to reverse this transport request?
    Thanx in advance.
    Rgds,
    Ram

    Hi Reddy,
    You can't Reverse transport request.
    But there is a work around to get back your old changes or format.
    For EX: if you have transported any infoobject or any cube .. there is a chance of getting back the old changes through the Version comparison.
    http://help.sap.com/saphelp_nw70/helpdata/en/a9/7e2ae837e511d5b3bf0050dae02d7c/content.htm
    Hope this Link helps you verymuch...
    In the above it has clearly been mentioned on Version management.
    Regards,
    Ravi Kanth

  • Reverse transport request!!

    Is it possible to backout/reverse or undo a SAP transport (change request) in the STMS / transport system?
    regards
    gunjan

    Hi,
    Just a thought. Can we not reimport the older version , i.e import transport request of the previous version, using STMS in the target system? This might probably overwrite the new code with old one!
    Rgds,
    HR
    Message was edited by: Hema Rao

  • Mass local transport request change to Particular Target Server

    Hi there,
    we have like 150+ local transport request and now we are looking to do mass changes to Particular transport request server? any programs that would do this? or any other way?
    Thanks in advance
    Kumar

    edit:  First and foremost, backup your DB!!
    1.  Get downtime for the system.  It's just not smart moving in that many chagnes w/ the system running.
    2.  Shut the system down.  Lock all the users (you can do this via updating USR02, set UFLAG = 64).
    3.  Backup the current buffer file:  should be in the trans\buffer folder.  Delete it afterwards.
    3.  Start SAP.
    4.  Copy and paste the transports into a spread, generate a list that looks like this:
    tp pf=
    sharepath\TP_DOMAIN_<SID>.PFL addtobuffer <transport> <SID>
    Run this in order, make sure the transport dependencies are correct in order.
    After this, you should have generated a large buffer, with all the 150+ transports, in order they are to be into the system.
    5.  Run tp IMPORT ALL <SID> CLIENT=### u12356 pf=
    networkshare\TP_DOMAIN_<SID>.PFL
    This will move all 150+ changes into the system at once.
    6.  Unlock users, restart SAP system.
    Edited by: Kevin Lin on Jul 16, 2008 7:23 PM

  • What's the difference between transport request and change request

    Hi, I am reading TMS part of TADM12-1 now, and confused about two terms mentioned in this book, transport request and change request.
    Is there any difference with them? Please advise. Thanks
    James

    In the context of course tadm12 transport request = change request

  • Change Transport Request of a OSS Note

    Hi,
    We have implemented 10 OSS notes in one of our environements and saved all the notes in a single Transport Request. But we need to change Transport Request for 5 of these notes.
    Can anyone suggest the best way to change the transport request of a OSS Note, which should change the transport request of objects that are part of manual corrections as well?
    Thanks,
    Phani

    I understand the other 5 notes are required as well, just in a different transport request. Assuming that some are complex fixes touching many objects and might even be dependent on each other, maybe the safest way would be to reverse all 10 as described (in reverse order as they have been applied, last in first out), delete the transport request, then apply them again using the desired transport requests.
    Manual steps need special attention, as always.
    Thomas

  • Posting Key Field Status changes - unable to generate Transport request

    Dear All,
    I did posting key field status change from suppress to optional ( P.Key 24).
    However I am unable to generate a transport request.
    Please share your inputs
    Thanks
    Sanjai 

    Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
    Regards
    Abhay

  • Transport request number change.

    hi
    can any one help me in this one
    i created transport req number for main program while modifying the program.after that i changed text in text-03 while saving this one it asked me the TR number unfortunately i saved this in another TR number now the problem is the text is not replacting in main program.
    it is giving error messege the task is locked.
    Plesase tell me the solution.
    by
    venkat.

    Hi,
    To delete your transport request first you have to unlock the request otherwise it will display you the message that object has been locked.
    To unlock go to SE03, enter your transport request and go with unlock.
    Now delete the entire request by selecting that request right click delete or if you want to delete object wise then select the object and go with delete.
    After deleting that TR, again save it in the request you want.
    <b>Reward if helpful</b>
    Rgds,
    Shakuntala

  • Error releasing transport request for change document object

    Hi Gurus,
    I created a new change document object for a Z-table. When i try to release the transport request in the development system it terminated with a message "Export application-defined objects       17.12.2009 11:07:45 Not yet executed". The transport request continued to be in the "Release started" status and i am not able to release it.
    I checked in the co file & data file directory for this request, The co file is available but the data file is not created.
    Could you please let me know how to solve this?
    Regards,
    Immanuel.

    It was a problem with some basis settings. Was rectified by the basis team.

  • Unable to collect the changed query elements to a transportable request

    Hi All,
    I had saved the query changes to dummy request, now I have to collect the changed qurey elements in a transportable request. This I am doing in the transport connection tab in rsa1. Now I want to collect only the changed elements of the query, & not all the elements. I have made (changes) restriction to a key figure inside the keyfigure collum. Now when I try to make a collection of this to a transport request - I am unable to find it under the query elements in the transport collection.
    Pls advice how to collect it in a transport request & move it?
    Thanks & Reagrds,
    Shreesh.

    Hi Shreesh,
             It may be collected under default request. You can collect changed objects by releasing default request.
    aftre releasing default request
    go transport connection(TX-RSOR) object type -
    >query elements -
    > Query--> collect your query.
    Grouping option as only necessary object
    then click on "Package"
    then check for your objects if not checked against your query elements(which you want to collect), plz check. at the same time check for your query name it should also be checked then only query will carry the changes.
    Hope this will help you.
    Thanks,
    Vijay.

  • ChaRM: read categorization of change docs based on transport request ID

    Hi There,
    We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
    Ádám

    In the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
    If you need my complete code, drop me a mail.
    Thanks,
    Ádám

  • How can i change transport request description

    I need to  change transport request description for one table
    Note:
    Considering this post as Basic and Locking it for futher postings.
    Answer: Double click on the Request and using the change option, change it's Description
    Edited by: Vijay Babu Dudla on Jun 29, 2009 7:02 AM

    Hi,
       I know I am a little to late to the party! But for all those who are going to search for this in the future there is a very good blog...i am posting the link below...
    Basically run the program RDDIT076...
    http://scn.sap.com/community/abap/blog/2015/03/12/program-to-change-transport-request-description-after-release
    Regards,
    Divaker

  • How to avoid the transport request popup when changing real-time load behav

    Hello experts,
    I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
    How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
    Thanks in advance, I will save precious time
    Guillaume P.

    Hello Krishnan,
    i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
    Do you know the particular object type to manage ?
    Hello Vishnu,
    same thing, whatever the option is (switch on / off standard) I have the transport popup.
    Anyway thanks for your try.

  • Changeing the Transport request Attributes?

    Hi Guys,
                 Can anybody tell me how to Change the Transport request Text , means while creating a Request u will enter the Description for Each request.Can anybody tell me how to change that description?
                   Very Urgent.
    Thanks,
    Gopi.

    HI,
       You cannot change the text of a request if you are not the owner of that request..first change the owner of the request to your id and change the text.
    Thanks
    mahesh

Maybe you are looking for

  • Can two or more users access the same Airdisk at the same time?

    I have a USB hard drive attached to my AEBS as a shared drive, and I can access it from any of my four macs. The problem is I have to disconnect from it on one mac before the other macs can access it. If I don't, the second mac receives an error that

  • Case statement in 9i/8i

    I want to be able to run a select conditionally. I have gotten this far. SQL> select 2 (case 3 when (select count(*) from all_objects 4 where owner = 'SYS' and object_name = 'DBA_REGISTRY') >= 1 5 then 6 ( select rpad(substr(comp_name,1,50),50,' ')||

  • Select SUM( ) in inner join - error in code

    Hi All, The following code is using ABAP OO and I get the following error E:The addition "FOR ALL ENTRIES" excludes all aggregate functions with the exception of "COUNT( * )", as the single element of the SELECT clause. Here is the Code: select a/bic

  • Getting help in Aus

    Bough and downloaded Elements and premiere.  Premiere will not load. Here is the error.  Has anyone actually managed to contact this company after they have get your money ??? Any ideas - I have re-started machine twice now.  Clearly that piece of ad

  • Microsoft excel 2013 stops working and getting very slow when I work in one file

    I am using windows 8.1 pro in my office and I have excel 2013, When I'm working on excel generally there is no problem, but I have an excel file which I work on in it's too slow and stops working, I have also tried to open the same file in another co