TRFC's in Error Status in P54 (SNC) System

Hi SNC experts,
Lots of tRFC are in error status when i am executing Sm58 Transaction.
The error text is "RFC destination A1PCLNT001 does not exist ".
Please guide me on this..
is there any SAP note relevant to this...so that these tRFC can be corrected.
Will highly appreciate your quick reply..
Thanks,
Indu

Hi Indu,
Check RFC connection again for correct Logical system assignment, Check Partner profile and also Ports in Idoc Processing (WE21) for RFC Destination.
Regards,
Vasu

Similar Messages

Error status 51 in receiver system

Hi ,
 I am trying to synchronise Purchase Requisitions of two different Application Servers of SAP through IDOC. I am using the IDOC type "PREQCHANGE01". I am doing the mapping of IDOC segments on the sender system programmatically. I have mapped all the fields required for the purchase Requisition.
Idoc is successfully transferred from sender system to receiver system, In my receiver system, while trying to view the inbound idoc in "WE02", it is in status 51 and giving errors as follows.
1. Enter Document Type
2. Document contains no items
3. Instance <My PR No> of object type PurchaseRequisition could not be changed.
Please help me solve this.
Thanks in Advance,
Cheers,
Vivek.

Hello,
The Idoc is made up of 3 Main segments,
Control Record
 IDoc number, Direction, Status, Basic type, Extension, Message type ,Sender or Recipient information, Port, Partner number,
 Partner Type, SAP Release
Data Records
 The structure of a data segment depends on the segment type
Status Records
 Status: the status reported by the segment
 Message: the text describing the status.
You need to fill the map the Idoc Data Record with the PR details.
Check the below link [IDOC1|http://wiki.sdn.sap.com/wiki/display/ABAP/CustomIdocTransferingfromOneapplicationserverintoAnotherapplicationserver]
[IDOC2|http://wiki.sdn.sap.com/wiki/display/ABAP/ALEandIDocs]
These links will help you understand the mapping and how you need to code your logic.
Regards,
Abhishek

AdControl error: HTTP error status code: NotFound (404)

For over a week now, a Silverlight WP 8 app with an AdControl configured for "test_client" continues to report this error and thus no bing ad visible either while running from an emulator (8.1 512) or from a WP 8 device. If I change the AdUnit
to use a PubCenter ID it works fine on the device and ads are displayed. The emulator connects to the Internet just fine via IE.
Could the ad server not be responding to the "test_client"?
Could someone let me know if it has worked recently for them? I tried contacting MS and no one seems to have an app configured with the test ad... I could give MS so many helpful suggestions. But looking at the hundreds of un-answered posts here - I
suppose they're busy with Windows 10...and have they asked developers if they're willing to put up everything on the cloud? all the while people still waiting to see the 'start' button on Windows 9?
here's the trace
Ad Err: NetworkConnectionFailure,Microsoft.Advertising.Shared.AdException: HTTP error status code: NotFound (404) ---> System.Net.WebException: The remote server returned an error: NotFound. ---> System.Net.WebException: The remote server returned
an error: NotFound.
 at System.Net.Browser.ClientHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
 at System.Net.Browser.ClientHttpWebRequest.<>c__DisplayClasse.<EndGetResponse>b__d(Object sendState)
 at System.Net.Browser.AsyncHelper.<>c__DisplayClass1.<BeginOnUI>b__0(Object sendState)
 --- End of inner exception stack trace ---
 at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
 at System.Net.Browser.ClientHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
 at Microsoft.Advertising.Shared.HttpRequest.EndGetResponse(IAsyncResult asyncResult)
 at Microsoft.Advertising.Shared.WebRequestWrapper.WebRespCallback(IAsyncResult result)
 --- End of inner exception stack trace ---
I do love Windows - don't get me wrong - I'll check my 2nd dev system soon.

Hi Ravi,
Reward points if this helps
The J2EE server might be overburdened and cannot accept the call. The 'Receive'servlet is not called. You will find further details on the HTTP status code definitions under "http://www.w3.org". Check the accessibility of the server by calling: http://<hostname>:<port>/MessagingSystem/receive/AFW/XI.
The Listener Beans of the affected connection (AFW, Marketplace, BC,see above) were not registered or the log-specific Event Handler was not found.
Check out this trouble shooting guide for SAP XI...Section 7.4.4.4 talks about exactly the same problem:-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Reward points if this helps
Regards
Pragathi.

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

InfoPackage loading giving IDOC Error: Status 51

Hello Experts,
1) I created a DB view (ZZVIEW05) in the SD area on R3
   and it extracts data OK in RSA3.
2) I replicated the DataSource in BW, Created InfoSOurce
   activated and created an InfoPackage.
3) Scheduling the InfoPackage is failing with an Error:
      Transfer(IDocs and TRFC):Errors Occurred
         Request IDOc: APplication document not posted
For the Error, I right Clicked and looked at the IDoc status in the Source System (R3 where we are getting the data from).
The Idoc with Error has a status of 51 and has the following message:
Any suggestions ?
Thanks, BB
Function module not allowed: ABI_IDOC_DISPATCH
Message no. B1252
Diagnosis
     The function module ABI_IDOC_DISPATCH and the
     application object type which were determined
     are not valid for this IDoc.
Procedure
     1. Please check that the process code in the
         inbound partner profile is correct.
     2. If this is the case, you should check the ALE
         inbound methods ALE inbound methods for the
         process code and see whether the specified
         function module and application object type are
         correct.
     3. If this is also the case, then the function
         module and the application object type are not
         permitted for the logical message type, message
         variant, message function and basis type that
         are contained in the IDoc control record. You
         should check whether the correct values have
         been assigned to these fields in the control
         record. If they do have the correct values,
         then the assignment to the function module and
         the application object type needs to be
         maintained.

Hi Dinesh & Sat,
I tried following:
Using WE19.....I was able to manually pump the IDOC that got stuck in ALE inbox on R3 side...then R3 was able service the request and send data to BW.
It seems the correct function module (R3 side) to process an incoming BW data request is RSAP_IDOC_DISPATCHER.
Instead ABI_IDOC_DISPATCHER is being invoked, by default, which is giving the problem (seems to be some kind of authorization issue!).
In WE20, I changed the partner profile to process using RSAP_IDOC_DISPATCHER. BUT somehow it is not being invoked.
I suppose some other setup (table entry) is conflicting with my setup ....
Any clues ?
Thanks, BB

Idoc Error Status 51 - " Transaction was terminated by the user"

hi gurus,
i have a problem with respect to T.code WE02. After i process the billing documents in VF04, i get error status notification in WE02 with Status 51 as " Transaction was terminated by the user". This error is not coming for all billing documents but for only some of the billing documents in that particular list. After reprocessing, the idocs are generating without any errors. what could be the possible reason for the intial error.
Thanks

Hi-
After reprocessing the idoc's the data comes ..
Idoc is a data carrier.i may get stuck in the TRFC's .
So after processing it gets pullled.
Hope u have understood the cocept behind this,.
Regards,
Vishwa.

Error Status Message

Hi Vadim,
Thanks for your help in my previous issue.
My client wants to setup the error message when the user enter >1 value in input schedule against to each month(Jan,Feb and March etc) it is basically HC planning where as they have average headcount value is 1 (So that the user has to enter the value between 0 to 1). The requirement is when the user enters more than 1 then the system needs to thrown an error message and it has to restricted the user.
I have found the normal excel function to setup this error status message through data validation in excel. Can you please tell me is there any EPM function available for this kind of setups in SAP BPC 10.0 EPM. So that we can use that option instead of normal excel function.
Please see my current setup message in the above screen shot.
Regards,
Satish

Hi Satish,
No EPM functions available, you have to use Excel data validation.
BPC can validate data only afte data was sent to database.
Vadim

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error message without error status matching

Hi Gurus,
I have a error message from process chain as follows:
Failure Group EREC01 Special FULL - Job 1 Process Group EREC01 Special FULL - Job 1 Of Type Local Process Chain Has Status Ended with errors (Process Chain Encapsulate EREC01 GRP) It is now 21:19:54 on 05/05/2010 (time zone PST) Current Process Chain Run: D80JW1WN91Q0OEZ3K0ZGF3MS5 in System BIP (Host biprd03)
but when I get into rspc to check the status for this running, it shows green for status in the log view. why does this error message come up without any error status matching?
Many thanks

Hi,
Please check if your are looking the correct process chain and in correct transaction. you may look at the logs of this process chain in RSPCM and not in RSPC.
If you can not find this error status message in RSPCM, them check SM37 and SM12 by providing the proper timeinterval for the message you got.
Regards,
Pratap Sone

Error message in TRFC 'An SQL error occurred when accessing a table'

Hi all,
Can any one tell what this below error message is about in while go into TRFC
'An SQL error occurred when accessing a table'.
and please tell me how to solve this problem.

Hi
Try to see what all tables are accessed by data source. and see if there is any lock on that..
If some other job is accessing that table - then there might be lock on that which is causing failure..
1) Try looking at ST22 dump also..
2) Try to do RSA3 in R/3 and if see if its is fetching any records or not..
Hoep it helps
--SA

ITune - Windows 8.1 Upgrade error : Installation success or error status: 1603

Hello,
When I try a upgrade itunes automaticaly ( IE, open iTunes and iTunes tells me there and update ), it fails to update.
When I manually download the latest copy of itunes and double click to install it, it failes with :-
iTunes installer completed
The installer encountered errors before iTunes could be configured
Errors occured during installations. your system has not been modified
Please run the installer again. finish to exit
When I look at the event loggs I can see :-
Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 7.1.1.3. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
Windows Installer reconfigured the product. Product Name: Bonjour. Product Version: 3.0.0.10. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Apple Application Support. Product Version: 3.0.1. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Please can someone help me fix this ? and tell me what I need to do to stop it happening inthe furture ?
Many Thanks

Hello there, G-Oker.
The following Knowledge Base article offers up some great recommendations for the very error message you are receiving:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Particularly:
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SAP PI Message Cancellation Alert - Message does not have restartable error status

Hello SCNers
Version: 7.1
Scenario: File --> PI -->SOAP
We have a situation where a PI message in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
In SXMSPMAST table, value for ITFACTION is DEL.
We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
Is there a way to Cancel or Change the Status of this single message?
Regards
Sudheer

Hi Hareesh,
Tried that too, but to no avail.
Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
Regards
Sudheer

BPM Error: Message has error status on outbd. side

Hi,
BPM overview:
Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
Error Message in SXMB_MONI: Message has error status on outbd. side
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</Trace>
I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
Any help would be greatly appreciated as I ran out ideas to fix this issue.
Thanks in advance.
Sarvesh

The issue was with the step "Transformation Step (2)" and I fixed it in the mapping.
When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)". The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step.
If I insert a "Wait step" between the 2 send steps it working. Can anyone explain how the send step in BPM works.
I did post the same question in "Exchange" forum also so that it can be view by more people.
Thanks,
Sarvesh

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

Message has Error status on outbound side - in ABAP inbound proxy !!

Hi All,
One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
Regards
San

Hi ,
Please check whether the correct data is coming from sender side . and check the j2ee engine runtime parameters.
Cheers,
Meera
Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

TRFC's in Error Status in P54 (SNC) System

Similar Messages

Maybe you are looking for