Trigger of down payment request from Purchase Order

Gurus,
I need an immediate help frm you all.
I have a vendor which is created centrally and the payment term attached to the vendor is 50% advance and 50% 30 days from the date of invoice.
What basically my client wants is that the moment we raise a po on this vendor - it should trigger a down payment request with 50%(Down payment request and down payment is properly configured in FI) Eg. If PO value is 1000 it should trigger a down payment request for 500.
Can any one tell me how can I can do that through mm module.
Points will defnitely assigned for the right solutions.
Thanks in advance
Deepak

Am also having the same requirement...If u have ideas..just share is
An using BAPI_PAYMENTREQUEST_CREATE to trigger payment request..

Similar Messages

Down payment Request from purchase order (me21n)

We need Down payment Request automatically created as per payment terms from purchase order screen.(ME21N)

no answer

Down payment report by purchase order

Hi,
Is there any report available to see the down payment/down payment requests by purchase order.
I am trying to execute the transaction code ME2DP but it does not exist. We are in ECC 6.
Please note we cannot use FBL1N (noted item/sp GL) as there is no PO in selection.
Regards
Shanif

HI,
You can try using Transaction code: ME2N with Scope of List 'BSET' and Selection Parameter which has option Down payment validation. If such selection parameter is not available in your system than you can create it using below path:-
SPRO - Materials Management -Purchasing -Reporting -Maintain Purchasing Lists -Selection Parameters
Please find below screen shot for the same:-
ME2N
SPRO Path- (Selection Parameters)
Regards,
Anand Raichura

Down payment request from billing

Hello
Can somebody answer what are
Down payment request from billing
Down payment settlements from AR
Billing value from AR (down payments excluded)
Where I can find these values for a particular Sales order (transactions , tables, etc)
Thanks

Hi,
Coming to your first question:Down payment request from billing
In general,we are going to create this down payment request for prepaid sales orders only.
Goto T.Code:VA02,Enter the order number.
Goto item details-->Billing plan.
Here you can maintain the necessity values for your down payment like the billing documnet type and down payment % value etc,...
While creating the down payment,there should be a block for final invoice.
This is down payment request from order.
2.Down payment settlements from AR .
For this down payment invoices the special G/L indicator will be defaulted as F.We have to pay that amount through F-28 T.Code.
While maintaining the values for this downpayment in F-28,don't forget to maintain the special G/L indicator as F and remove the tick mark for Normal O/Is
You can pay the necessity amount and the remaining amount has to be maintained in difference postings such that the not assigned value should be 0.00.After paying this amount the indicator will be turned to "A".You can check it in FB03 T.Code and change the layout in this transaction and include the field special G/L indicator.
3.Billing value from AR (down payments excluded)
This means that if the downpayment % is 0 then it is nothing but the final invoice amount.In this case it comes into picture.
It is equivalent to order and final invoice.And down payment is dummy here.
T.Code:VA02
Enter teh order number.Click on document flow.
You can find the downpayment and final invoice numbers.Make a note of them.
VBFA is tha table where you can find the subsequent documents.
FBL5N is the T.Code where you can find the cleared and open items for your customers.
All your cleared downpayments will be appeared here along with the clearing document number.
BSAD and BSID are the tables.
FB02/FB03 are the T.Codes for checking accounting document entries.
Regards,
Krishna.

Error message in down payment on asset purchase order

Hello,,
While i am trying to make down payment request with reference to PO have asset number it is return an error message
*Store a cost element for credit down payments
    Message no. KI165
Diagnosis
    You posted a payment to a CO-relevant object (cost center, order, and so
    on). The payment is therefore recorded in CO.
    If a payment has no order reference, no consumption account can be
    derived. Therefore, CO posts the payment under a default cost element
    created and stored during Customizing.
    You have not yet maintained this default in the system.
Procedure
    Maintain the default cost and revenue elements in the Implementation
    Guide under "Project System" for controlling area CA00.*
I don`t know what is the reason for using this cost element and which type of cost elements that i can use in this issue....
We are not use Down payment clearing account, because Our customer don`t need this account..
Please help me ASAP
Thanks for your cooperation
Hussein

Hello Hussein,
For error message KI165,please maintanin default cost element in OKEP.Down payments have to be posted in CO with cost   elements. In case of purchase orders (or open items in CO), the cost element for consumption can be derived from the purchase order. Thus the down payment in CO is posted with the consumption cost element.
If the down payment does not have any reference to a purchase order, then the cost element for which the consumption will be posted is not known. In this case, the cost element maintained with OKEP is used.
The error message KI165 will occur if no cost element is maintained with OKEP - not regarding whether the actual down payment has a reference to a purchase order and thus will update in CO under the consumption cost element derived from the purchase order. This is always a source of misunderstanding - but I hope it is clear now.
OKEP configuration is absolutely necessary if you do not have a cost element assigned at the time of downpayment request creation.
If after maintaining the default cost element you get some other error then please note that you would need to check the following :
1.Compare the configuration settings for the GL accounts that are used for posting the cash call in EHP4 system with the system without the EHP4 support pack.
2.Check the controlling area settings in both the systems.
Regards Bernhard

Summarizing open items in down payment request from SD

Hello!
We have a sales order with a billing plan, let say, 20% down payment, 80% - final invoice. There are 3 items in the sales order. When creating the down payment request the system creates 1 document with 3 customer lines. We would like to have 1 document with only 1 customer line. Is it possible to summarize customer lines on the down payment request?
OSS note 213852 "Analysis of down payment processing with FI" says that summarization is not possible, but the note was issued in 2002. Were there any updates since then?
Thank you!
Edited by: Anna Strokova on Oct 7, 2008 8:58 PM

Hi Goutham,
I think you should have posted this question to PLM forum i.e. Product Lifecycle Management (PLM). Project System is part of PLM .
Down payment request can not be created automatically from the project structure or milestone in projects.Milestones in projects are used for billing purpose.
You can use transaction f-47 to enter down payment request.
Please refer the link below for down payment request.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/01/a9c78f455711d182b40000e829fbfe/frameset.htm
Hope this helps.
Reward points if you find useful.
Regards
Tushar

Paid Down Payment Request from 2007 not visible in 8.8

Hello experts:
I recently upgraded a customer from 2007 to 8.8, and an existing fully paid down payment request is now not visible anymore in the "incoming payment" window due to some of the changes in 8.8. But I also cannot reconcile the transaction because paid down payment requests cannot be reconciled.
I tried to cancel the incoming payment in order to apply it differently, but that also fails with a strange error message ("Cannot cancel payment: One of the credit notes has been deleted. [3524-6]").
I could create a JE to transfer the balance from the liabilities account to the asset account within the BP, then reconcile the two transactions in the asset account, and effectively having zero balance in the liabilities account, but I'd like to reconcile the two transactions in the liabilities account as well, so that they're really closed.
Any ideas?
Thanks in advance.
Joerg.

Thanks for your reply Jitin.
My issue is related to A/R, so the mentioned query doesn't turn up any results. However, a few minutes ago, the same issue appeared in A/P, so I tried the query again, with no luck.
I will proceed to log a support message and post back with the solution.
Thanks,
Joerg.

Down Payment for Assets Purchase Order and depreciation

I have created one purchase order for assets now when i am making down payment against purchase order it pick up asset and post down payment correctly without depreciation. But when i am clearing down payment against the vendor invoice it is reversing downpayment in asset explorer [AW01N] with Transaction Type 180 and calculating depreciation on reversal amount. I am using down payment spl G/l indicate "M" even i tried with "A".
Can anyone tell me why it is reversing depreciation on downpayment cleared against invoice when original down payment is not calculating depreciation.

Hi,
As per as my knowledge is concerned, you should treat the cost element as " Category 90 " , this is a balance sheet account.
Please check at your end.
Thanks
Dasa

Clubbing of down Payment under one Purchase Order for a customer

Hi
We have a client requirement in which the client wants to view all the down payments entered under one PO for a particular customer to together so that it helps in preparing invoice.How do we do it ans is there any standard SAP report available for it?
Subir Didwania

Hi
I had faced the same problem a few days back. The client in my case entered the customer 's PO Number in the reference field while posting the down payment. There is a standard SAP report FBL5N for customer. You need to go to change layout button (Cntrl+F8). A pop up will appear which will show the displayed fields on the left hand side and the hidden fields on the right hand side. select the reference number field on the right hand side (From the hidden fields) and add so that it appears in the displayed fields list. Click on the copy button. The new layout will appear for the data selected. Next click on the filter button (Contrl +F11). Again a pop up will appear. Select the ref number field on the right hand side and add to left column. then click on the right button. The system will then apply the filter and ask you for the reference number in which you can enter the PO number for which you want to display the details
Hope this meets your requirement. assign points if the information is useful to you
Regards
Sanil Bhandari

Help Needed with creting down payment request without tax from order

Hello,
We are trigerring a down payment request from sales order. There is no tax to be collected on down payment. When the billing document is created SAP copied over tax elements from order and posts a relevant tax code on the down payment billing document. How can we force a zero tax code on the DPR billing document?

Hello Pankaj,
I think you don´t want to determine any tax condition?
Try to assign requirement 84 to your tax condition(-s) in the pricing procedure. This requirement helped me not to determine
other condition types in the down payment billing document.
If you just want to determine a different tax code the solution could be to define a new table (key kombination) in the access sequence assigned to your tax conditions. That new table could include the billing type in additional to other criteria and can help you to determine a different tax code with otherwise identical parameters.
Hope this helps.
Regards
TDI

Down payment request for PO

Hi Guru's,
Can anyone tell me the down payment process for Purchase order in SAP.
We have a PO which we need to make payment 50% advance and 50% after 30 days.
a. All configuration did for MM and FI
b. Payment term
c. Down payment request
d. Down payment
Thanks in advance
Deepak

Dear Anand,
Thanks for your reply. But my query is not that.
Down payment request should be generated subsequent to purchase order creation.
a. Kindly confirm whether it is manually(if so request you to provide TCode other than F-47) to be created from MM Module.
b. How to automise the payment request subsequent to purchase order.
Please help and points will defnitely be assigned.
Thanks
Deepak

Down Payment Request at Header Level of PO

Dear Friends
We want to create Down Payment Request and subsequently the Down Payment at Purchase Order Header Level. We are looking for a standard solution without any Custom Development.
While creating a Down Payment Request (F-47) the system does not ask for the reference of the Purchase Order. But if Purchase Order Number is referred then the system will ask for the line item also.
When we convert this Down Payment Request to Down Payment (F-48), we can refer the Purchase Order Number. If referred, the system asks for the line item also, which becomes mandatory.
However we want to understand if there is a possibility of posting the Down Payment against the Purchase Order Header.
This is required, since if there are multiple line items in the purchase order, then creation of Down Payment Request as well as Down Payment becomes a tedious activity in SAP.
Someone innovative and has already worked on such requirement please reply.
Regards
Ketan Patel

Hi,
Try the following steps to pay to Vendor w.r.t PO:
1.Check the Vendor reconciliation A/C,
2.Go to FS00, and check Filed Status Group,
3.Go to OBC4, check the Filed Status Group, what u have mentioned for the Vendor reconciliation account.
4. Go To material management segment and put optional entry for the field of Purchase Order and save.
5.Now come to F-48, enter the date, vendor, assign the sp.G/L transaction(A),bank sub account, amount,
then enter, it will take to next screen
Here you enter amount & your purchase order number with reference to your are going to make the payment. Now simulate and save.
After the GR & IR is done, Perform F-54 for Down Payment Clearing
Regards,
Biju K

DOWN PAYMENT REQUEST - asset number on down payment request.

Concerning this request, you must know that we should use a 'dummy asset number' because down payments are not depreciable.
With this dummy asset number (which is not depreciable); we have to :
-validate the down payment request
- generate the automatic payment, with the right dummy asset number.
Right now, the program takes the down payment of the purchase order but not the dummy one.
Does someone have already handle with this case ? The difficulty is to manage with the automatic payment run. Is still existing a BTE ?

Hi,
Create an AUC asset master and try to post down payment to that asset.
Thanks,
Srinu

Blocking AR Down Payments Requests

Is there any way to stop an open AR Down Payment Request from appearing on the Incoming Payments screen?
I want to use AR Down Payment Request as a means of printing a document that is linked to a sales order, so I have no interest in the DPR as a financial transaction. (The information to be printed is slightly different to the sales order so I cannot print directly from that.) The DPR will be closed once the documentation is produced, but it can stay open for some time to allow for changes.
Unfortunately, open DPRs then appear on the Incoming Payments screen. Is there any way that I can stop that? I tried the Payment Block checkbox on the Accounting tab of the DPR, but it does not seem to make any difference.
Regards,
Douglas

Hi Douglas,
as Suda says above, it is a system definition that all documents that may be paid with an inconming payment are available for selection in that window.
Since your sole requirement is to print a document from the DPR, have you considered saving it as a draft document & then print it? That way you could make all necessary changes & reprint, yet the document would not appear in the incoming payments window.
You can remove the 'Draft' watermark in the print preferences.
All the best,
Kerstin

Customer Down Payment invoice (from delivery) not automatically assigned

If I create a Down payment invoice from Sales Order (and I paied it) on the final invoice the sistem automatically assigne the down payment invoice on the final invoice for the order.
If I do the same think but crerating the Down payment invoice from the delivery (and I paid it) when I create the final invoice I need to assigned it manually.
SBO 8.81 PL 06
I haven't found any set up for this, so I think is an error the sistem must work on the same way if the document is copied from the Sales order or delivey.
Someone know if there is some set up? or I need to open an error message to SAP?
Thanks

My question is:
If I make a sales order.
I create a down payment invoice using copy from SO.
I make the incomuing payment for the down payment invoice.
I create the delivery from the SO
I create the invoice from the delivery
The system apply automaticaly the down payment invoice to the invoice (because I select a delivery that is linked to the so that I used to create the down payment invoice).
If I make a sales order.
I create the delivery from the SO
I create a down payment invoice using copy from delivey.
I make the incomuing payment for the down payment invoice.
I create the invoice from the delivery
The system DO NOT apply automaticaly the down payment invoice to the invoice (even if also this document is linked to the delivery that I use to create the down payment invoice).
I know that I can select it manually. But I can select it manually also if I use the SO to create the down payment instead of the
delivery. Why if the situation is the same in the firs case the system do it automatil^cally and in the second case I need to do it manually?
Of course if I create a Down Payment invoice without selecting any document (SO, delivery..) the system don't know if you want to apply the payment to the final invoice.
But If I select the delivey to create the down payment (the same if I select the SO): I want to apply the down payment to the final invoice of this delivery and not to another delivery.

Trigger of down payment request from Purchase Order

Similar Messages

Maybe you are looking for