TS2662 Wireless keyboard and mouse were working fine until today; installed new batteries in both when they wouldn't work-says they are connected intermittently, but can't use either one-have tried to re-pair and nothing happens-codes not recognized-

i have been using my wireless keyboard and mouse with no probs until today-installed updates this morning-since I restarted have been unable to use either device-have tried everything Apple suggests to do- re-pairing unsuccessfully; turned everything off and back on-sometimes the Bluetooth says it is connected, othertimes not-but even when it says it is connected the keyboard/mouse don't work; put in new batteries-no go also; bluetooth icon is on. Anyone have any ideas????

Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048

Similar Messages

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?

I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?

You make an appointment at the genius bar of your local Apple Store and get it serviced/replaced. You broke it. If you can't even force a reboot, there's nothing much more you can do.

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

My ipad mini was working fine until i installed this last update, now it wants me to reset it and it want let me , What do I need to do?

my ipad mini was working fine until i installed this last update, now it wants me to reset it and it want let me , What do I need to do?

Try resetting the phone:
Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.

I am using systec usbmodule1 to send and receive CAN messages , is any one have tried this in labview?, if yes can you send me the code thanks

i am using systec usbmodule1 to send and receive CAN messages , is any one have tried this in labview?, if yes can you send me the code
thanks
Solved!
Go to Solution.

Hey,
All of our CAN drivers have been written for National Instruments' CAN hardware (referenced here : http://digital.ni.com/public.nsf/allkb/E2C6ED025C798C5586256F4E00520448 ). Thus, you will have to code all your communication manually, unless Systec provides a LabVIEW driver. There might be various dll files that Systec provides for communication, which you will be able to access through LabVIEW. Take a look at the Call Library Function Node, which can be found from the Functions Palette under Connectivity -> Libraries & Executables. Here you can call a dll file, and also the individual functions within that dll.
I would suggest posting your question either to the LabVIEW forum, as previously mentioned, or to the CAN forum found here : http://forums.ni.com/ni/board?board.id=30
Justin E
National Instruments R&D

I received my new Iphone 6 last week, backed my iphone 5 and then restored my new handset. It has been working fine until today when I deletec all my contacts from my old handset. Contacts have gone from my new handset too, how do I get them back?

I received my new iphone 6 last week, backed my iphone 5 and then restored my new handset. It has been working fine until today when I deleted all my contacts from my old handset. Contacts have gone from my new handset too, how do I get them back? I don't think the back up was done using icloud as I keep getting the message "not enough memory"

The point is not whether you used iTunes or iCloud to restore your new iPhone. It's whether you have Contacts turned on in Settings > ICloud. If you do on both your old iPhone and new iPhone then those devices are connected through iCloud. Deletions on one device are also made on the other.
You may be able to restore your Contacts be using your old device backup to restore your new iPhone again. Make sure that you turn Off ICloud functionality on your old iPhone before you delete anything else from it.

I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.

I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.

try another cable it's a std cable that most consumer electronic use
if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
if that does not help then I would say that the appletv have died

I got an error message saying "an error occurred while creating the backup folder". I have tried deleting the plist and am using the latest time capsule software and using OS Lion Any ideas what to do please?

got an error message saying "an error occurred while creating the backup folder". I have tried deleting the plist and am using the latest time capsule software and using OS Lion Any ideas what to do please?

See #C10 in Time Machine - Troubleshooting.

Can't connect to App store on any device, i have tried to log out and back in again.

Can't connect to App store on any device, i have tried to log out and back in again.
Any suggestions.

Restart your router.

I made an in app purchase, but it hasn't downloaded, I have tried to restore purchases and deleting and re-downloading it still with no luck, can anyone help?

I made an in app purchase, but it hasn't downloaded, I have tried to restore purchases and deleting and re-downloading it still with no luck, can anyone help?

Hi there, The best thing I would do is contact the app maker!
How to get in contact with makers:
1. App Store Developer Website
2. In App Contact Support (Some app's don't have this!)
3. App Store Contact Email (I have not seem to have located the contact emails yet!)

My iphone 4 can make and receive calls but I cannot hear the person on the other end...they can hear me. I have tried plugging headphones in and resetting...any other ideas?

My iphone 4 can make and receive calls but I cannot hear the person on the other end...they can hear me. I have tried plugging headphones in and resetting...any other ideas?

If you need to use the phone now, try using speaker phone until you can take it to an Apple store and have them further look into the problem.

Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

Found these instructions here:
https://discussions.apple.com/message/15388885#15388885
I found an answer that worked for me. I am using an iMac.
(1) Sign out of the iTunes store
(2) Open a NEW account with a new Apple ID
(3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
(4) Go to RECOMENDATIONS & PING POSTING
(5) Turn on Genius there
Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
Worked for me.

Firefox will not load up; has worked fine until today

firefox will not load up; has worked fine until today. I am using Google chrome to communicate this message, so everything else is OK

Some things you can try (if you haven't already done so) include:
Go to System Preferences>iCloud and confirm that Documents & Data is checked
If you're running Mavericks, go to System Preferences>iCloud, click Options next to Documents & Data and confirm that Pages is checked.
Go to System Preferences>iCloud, uncheck Documents & Data, choose Delete from Mac (they will still be in iCloud), restart your Mac then go back and check Documents & Data again.
Go to System Preferences>iCloud, click Sign Out, choose Delete at all of the prompts (your data will still be in iCloud), restart your Mac, then sign back in.
Reset the iCloud Documents & Data service: http://support.apple.com/kb/HT5824.

Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today.

Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today. Sends fine to some but not to others. What's up?

Like any electronic item, it sometimes gets inexplicably balled up. The reset is no different than rebooting a computer that is acting hinky. If you don't have to do it often, then it is not anythign to worry about. (I know - not the kind of tech talk you were probably expecting, but the words selected are about as scientific as you can get concerning this type of weirdness....)
Cheers,
GB

TS2662 Wireless keyboard and mouse were working fine until today; installed new batteries in both when they wouldn't work-says they are connected intermittently, but can't use either one-have tried to re-pair and nothing happens-codes not recognized-

Similar Messages

Maybe you are looking for