Two statements for one report (Analysis)

Hi all,
please help me understand the behavior of OBIEE.
When I open my Analysis, it asks for input parameters. These parameters are collumn prompts with checked "require user input". Sure, user can't run Analysis without any parameters.
Now what is strange. In Administration -> Manage sessions I can see TWO statements, created by me. I didn't run this report twice. This happens often. It's not all. These two statements are not equal. One of them has WHERE clause with my parameters I've set, but another statement DOESN'T have any WHERE clause. Actually, the first statement runs for a minute or like that. But the second statement can run for an hour and longer. But this is not just my observation, users complain about slow performance. The Analysis DOESN'T return any result untill both statements end their work although the first statement with WHERE clause is already finished.
How I deal with it... I perform cansel in Administration -> Manage sessions and then run Analysis again with the same input parameters. It returns result in few seconds, it seems like using cache (but repository object is not cashable).
What is wrong here? This looks like inappropriate behavior. This is not huge problem for business, because we have only few users at this stage. Most of users still use SAP Business Objects. So I can waste my time for canselling of statements for these few users. But the question is what will be in the future. Please, help me.
Oracle Business Intelligence 11.1.1.6.6

Remove a column at a time, and see if that makes BI fire only one query. Once you identify column forcing query to split, check RPD model for the logical table for that field. Check content level, logical sources, physical and logical diagrams etc. Also perform consistency check.

Similar Messages

Joining two datasets for one report

Hi All,
I have 2 datasets i want to joing together.
The 1st is a mysql query and 2nd is a mssql query, I have set a parameter which is the userid from the mysql query and added this to my mssql query.
If i execute the mssql query and add the parameter my self then the report will run.
I want to be able to set the mssql query to pull the userid from the mysql query and then output the information in another table. Is this possible? or is there another way to do this.
Thanks

I want to be able to set the mssql query to pull the userid from the mysql query and then output the information in another table. Is this possible? or is there another way to do this.
Hi Phil1988,
According to your description, there are two data sources in your report, one is mysql database and another one is mssql database, now what you want is that get the userid from mysql database and use this values to filter data on mysql dataset, right?
In this case, what you have done is exactly right. (I have set a parameter which is the userid from the mysql query and added this to my mssql query.) Create a paraemter, get available values and default value from the mysql dataset, and then use
this parameter to filter data on mssql dataset.
Reference.
http://technet.microsoft.com/en-us/library/aa337400(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/dd255287.aspx
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
TechNet Community Support

I need two query in one report (two detail section in one query)

Hi master sorry for again distribute
Sir I need two query in one report
Because I need two detail section in my one report
Such as
Master
Vno=9088989
Detail          1
=
=
==
=
Total                     99999
Detail          2
=
=
==
=
Total                     33333
Sir how I get this type of report
Please give me idea
Thanking you
Aamir

I want to see the report as follow.
d_name: CPU-1
date: -----------
Software installed:
sw_id, software, version, serial_no, sw_type
(list of softwares attached, can be more then one)
Hardware attached:
hw_id, hardware, specification (same like software list, it will contain hardware list attached to specific device),
Please if you can help me that how will i make a query for this.
Thanks and Regards
Maz

Two prices for one material in sales order according condition type

Hi,
I configure the condition type according to following condition record:
Plant/ Sales Organization/ Distribution channel/ Material / Customer
(because system should calculate two prices for one material in two plants)
In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
It is so difficult for user to update one by one, because there are several sales orders which need to update.
Is it any way to solve this problem?
Thanks,

> In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
Hi,
Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
It is said prevention is better than cure
Hope you get some inputs
regards,
Sagar

Manual bypass to view all history entries of all user for one report

Test have been performed on standealone BIP 10.1.3.4.1 (Patch 11931697). May be it can be reproduced with previous versions and/or other J2EE container.
Problem is now described in Oracle Support with bug ID : 12412334
Bypass solution may be helpful for people who use work directly in BIP web interface or who integrate this web interface using HTTP URLs or HTTP/REST like custom app (and may be other cases...)
When logged with an admin username, you can view OR filter "ALL" history of one all users for one report by typing an url like :
http://BIP/xmlpserver/servlet/reporthistory?report_url=/REPORT_DIR_PATH/XDO_NAME/XDO_NAME.xdo&tfilter=all
Where :
BIP is BIP Server DNS
REPORT_DIR_PATH is report directory path in BIP web interface
XDO_NAME is report's name

I don't think there is a way. There should be, but I've never seen it.

Two address for one company code

Hi SAPians,
I have a doubt in maintaining company address for Invoice output!
Is it possible to maintain two Address for one company code?
Like if XYZ company code and say it has has two customers AB and CD.
Then if i want to maintain Company address on print layout for invoice Different to each. how can i achieve it.
If yes, please through light on it.
Regards,
Romesh

Hi ,
As far i know it is not possible to have two different address for the same company code.As table can hold only single unique data.
As far as the above answer is concerned, we use International version fo Customers not for Company Codes.
Hope it helps.
Thanks and Regards
Rohit.

Fetch New Data shows two entries for one account

I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
I tried deleting
the offending Gmail account, but it did not delete the duplicate entries.
erasing all settings
all of my accounts, including iCloud, IMAP, and other accounts.
The ghost account is still there, fetching calendars and contacts.
Has anyone else seen this behavior?
I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

Two billing for one sales order for same customer

Dear All ,
I have a requirement of posting a two billings for one sales order.
One is for Sales and another is for commission...
Entry could be
Sales Entry - Db Customer
Cr Sales
Commission entry could be
Db - Cusomter
Cr- Sales commission income account (P/L)
We are having third party sales scenario , In this case billing is MIRO dependent.
Once the miro is done then only billing is possible ...
Could you please advise on that ..
Regards,
Sukh

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

Two sids for One instance

Hi All,
I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
Give me the suggestions...
Cheers,
Moorthy.GS

I think you need to define your term 'database' here
In Oracle world, database is usually referred to as instance.
a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

LMS 4.2 - Two notifications for one alarm.

Currently when a device, say a router goes offline we receive two Active 'Unresponsive' alarms for the router and then when it comes back online we receive two Cleared 'Unresponsive' alarms. All have their own unique Event ID. (shown below)
I was wondering if anyone could help me to config LMS to send only one Active 'Unresponsive' notification when a device is offline and then one Cleared 'Unresponsive' when the device is back online.
Here's an example of the Active 'Unresponsive' alarms I receive when I power the router off:
Notification 1
EVENT ID               = 0002BI5
TIME                   = Thu 29-Nov-2012 15:26:32 EST
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = router.domain
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = Unresponsive::Component=172.16.1.254 [router.domain];ComponentClass=IP;ComponentEventCode=1098;InterfaceType=ETHERNETCSMACD;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=172.16.1.254;IPStatus=TIMEDOUT;InterfaceOperStatus=UP;Ne
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION       = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Notification 2
EVENT ID               = 0002BI6
TIME                   = Thu 29-Nov-2012 15:26:57 EST
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = router.domain
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = Unresponsive::Component=router.domain;ComponentClass=Router;ComponentEventCode=1101;SystemObjectID=.1.3.6.1.4.1.9.1.569;Description=Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION       = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Any suggestions?

Am I alone with this issue of receiving two notifications for one Unreachable event?

Two titles for one screen

Hi Everyone,
Is it possible to give two titles for one dialog screen.
Based on a grid i perform centain things where the user has to enter the values in the dialog screen.
To this screen i want to title based on the which grid it is. Is it possible to do.
Can anyone help me on this.
Thanks,
Prabs.

when you define the title bar (to be used with set title bar)
enter the text with place holders like below.
& & my &
later in your program you can supply text for & using set title bar.
set titlebar 'MYTITLE' with 'This' 'is' 'test' .
This would produce title bar as
This is my test
set titlebar 'MYTITLE' with 'Where' 'is' 'Title' .
This would produce title bar as
Where is my Title.
Hope this is clear.
Regards
Raja

How to create two respone for one request

Hi
is there any way for us to create two response for one request
the scenario is as below
1. user click on update button for particular record in the datatable (
after its get updated and status get updated = 'UPDATED' it will remove the object from ObjectListDataProvider and clear the tablePhaseListener ).
2. After it gets updated successfuly , i want to prompt the user with generateExcel function which using response.getOutputStream() using Apache POI.
How can we combine 1 and 2 together
Here what i have tried and didnt work
1. i tried to put the generateExcel function in destroy() method after page is rendered but it gives me Exception
2. i tried to put the generateExcel function in prerender() method
but the page will only execute the generateExcel function
- the data still get updated to the database but it doesnt refresh the page ( i meant the removing object and tablephaseListener.clear() doesnt work )
3 . i tried to put generateExcel Function after it process the data
public String updateData()
       //update data
       if(success){
            // prompt user to save excell sheet
        return null;
     }This one also doesnt work and gives the same behaviour as number 2
The Prompt to save excel sheet still gets popped up
but the page just doesnt get refreshed
Thanks
is anybody know the workaround?

yea i did set some alert message and clear the table by calling
provider.removeRow and commitChanges
it just doesnt reflected in the page that we see
by actually is already removing the row from the provider
Thanks

Two invoices for one sales order

I want to create two invoices for one sales order
Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
I would say 10% of 100 $
And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
Both invoices will be relevant of accounting.
Would any body suggest this, how it would be mapped it in to SAP.

Hi Suresh,
It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
Go to IMG-SD-Billing-Billing plan. Do ur own configuration for Billing plan.
Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
Hope this wld help U.
Regards,
Praveen

Can we create two Filters for one cube

Hi all,
I created two filters for one cube (in 11v), I assigned this filters to one user in shared services , so which filter work,
I think ,We have to assign only one filter for one user , please i need clarification....
Thanks
Edited by: user98631 on 12 mars 2010 05:13

You can create many filters for one cube. I usually associate one group per filter and a user can have one or more groups assigned to them. Can't remember what happens when a user has access to conflicting filters (i.e. the order of preference). It is in the DBAG I am sure though.

TS1424 Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

Hello! Tell me, why I paid two times for one game? Stray Souls: Dollhouse Story - Collector's Edition HD, Collector's Edition???

Check your purchase history. The second charge may be for unlocking someting in the game or might be in-game items.

Two statements for one report (Analysis)

Similar Messages

Maybe you are looking for