UC540 Auto Dial

Hello everybody,
We have setup a UC540 at a clients office, and now they are asking if we can setup a Auto Dialer, so they can put a bunch of phone numbers and the system will call those phone numbers and read a small script. Basically like have the system cold-call.
Does anybody know how this can be done? or if there is a script that we can use? or any other way that this can be accomplished.
All responses are appreciated

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Similar Messages

FXS/Analog phone auto-dial when picked up?

Hello. UC540 862. I have a door intercom i have patched into the phone system via FXS port (will not use FXO). When the button is pressed on the door intercom, you get a dial tone over the speaker and the FXS port is open.   Is there a method to have it auto-dial an extension?   I've setup lobby phones that intercom a specific phone internally, but in this case, i need it to autodial a main hunt group- ext 101, which blasts 4 people. Unfortunately the door unit does not have a dial-pad.
Thanks in advance.

didn't work but again - fxs port as it's not compatible with fxo port .. (below readout).. trying connection plar 101.. maybe that'll work
KMK-UC540(config-voiceport)#do show voice port sum
                                           IN       OUT
PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
=============== == ============ ===== ==== ======== ======== ==
0/0/0           -- fxs-ls      up    dorm on-hook idle     y
KMK-UC540(config-voiceport)#voice-port 0/0/0
KMK-UC540(config-voiceport)#intercom 101
                              ^
% Invalid input detected at '^' marker.
KMK-UC540(config-voiceport)#int ?
% Unrecognized command
KMK-UC540(config-voiceport)#

I just upgraded to Firefox 5. How can I get a copy of Firefox 4. The new version does not work with Skype's auto dialer.

How can I get a copy of the previous version of Firefox? The latest version (5) does not support Skype's auto dialer. I use this tool to be more productive.

Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended.
If Firefox disabled some add-ons (especially extensions), it likely is because they include a list of compatible Firefox versions and haven't yet been updated for Firefox 5. If they worked on Firefox 4, there is a good chance they will work on Firefox 5.
You can force Firefox to ''ignore'' add-on version restrictions by (what else) installing an add-on. Then you can test whether the add-ons important to you actually work in Firefox 5.
[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter :: Add-ons for Firefox]
After you install this add-on and restart Firefox, there will still be a message that "--- is incompatible with Firefox 5.0" but the add-on will be enabled and a Disable button will appear for that entry.
Please report back on your results.

How To Get A Java Program To Initiate Auto Dial in Windows???

I have a Java program that opens a connection to a server (another Java program) using sockets and streams. On some windows machines (various versions) with auto dial enabled the connection is made without human intervention. However on some windows machines (even same as others) the autodial doesn't work and all I receive is NoRouteToHostExceptions.
What I need is some way of initiating the autodial from within Java explicilty rather than assuming that the OS will do it when a request is made to a remote IP address.
I emplore anyone with some knowledge of this to provide assistance as I am going nuts trying to solve this problems.

A long time ago I figured out how to create, find, and manipulate items in the DialUp Networking using an InstallShield program. I am sorry I can't remember specifics (I wouldn't have even replied except no one else has either...) but I remember that I did a LOT of hunting on Microsoft's website for how to do this on the various platforms of the day (Win95, Win98, NT4.0).
I imagine that in order to accomplish this from java, you will probably need to find the system-specific commands (at Microsoft) and exec them from your java program.
/Mel

Web based Auto dialer in java

Hi,
I have assigned the work that implementation of "web based auto dialer in java". The problem is I have a button on the web page . when I click on that button . I have to call to particular number (fixed number). I have search a lot . I didn't get . please tell me how to approach or please send me the code anybody have already implemented.

Hello Developers,
i am a new bee in this field. I have stressed out myself searching over the Internet. To my bad luck, not able to understand how the hel to proceed. What i was able to get were some s/ws .
I request the community to please guide, how to proceed .
Will be really grate full!
Even a little help will be appreciated!!

Unified Communications Auto-dialer

Are there any good auto-dialer apps available for Cisco UC?

Hello,
Can you please define Auto-Dialer, is it surveys you need or emergency dialers?
Cisco UCCX or UCCE has outbound option (IVR or Agent Auto dialer per campaigns).
Amer

VoIP Auto Dialer for testing numbers

We are porting several thousand numbers over to SIP connectivity via the carrier in a couple of weeks. I need to find an auto dialer of sorts that will allow me to input a range of phone numbers and then have the dialer dial each number and report back on the status - fast busy, ring, voicemail, or whatever. I would love to rely on the carrier and their reporting information, but many hundreds of these lines are too critical to not actually test with an actual call. Doe anyone know of a good application that can do what I am describing?
Thanks.
Tom

Some carriers use Empirix Hammer, but it is not cheap, will do exactly what you are describing:
http://www.empirix.com/solutions/products-services/hammer-test.aspx
HTH,
Chris

CRM Auto-Dialer for ACT! Contact Manager

I'm using 7961 series phone and a contact manager that has auto-dialer that usually needs an analog line. I do have a digital to analog converter but it does not respond since there is no dial tone after getting outside line. Question: I wondered if there are config settings that allow the phone to accept the touch-tone signal/phone number to speed dial out? Comments? Many thnxs k

One of the most popular tools available now for CRM is Salesforce.com. The other popular one is Elements. For a fairly good comparison see
http://mac-crm-software-review.toptenreviews.com/

Auto dialer not calling out

Hi
I have a water alarm that I can connect to my BT phone line. It will call the programmed numbers if there is a water leak.
However, I can't get it to call out using my BT phone line.
I have taken the devie round to a friend's house and tried it on their phone line - it works perfectly.
I live in a flat (as does the friend I tested it with). I have also tried it in another flat in the block who has a BT line and it also didn't work using theirs.
I have broadband from PlusNet.
I can make and receive calls perfectly using my phone - it is just the auto dialer that doesn't work.
Can anyone help? Could there be a problem with my line that is stopping the auto dialer from working. Maybe it dials the numbers too quickly for my line - although it does work at my friend's place.
Many thanks
rigby44

The dialler must be set to use tone dialling and not loop disconnect.
Loop disconnect will quite often fail if the circuit has broadband on it, as the broadband filters distort the DC pulses.
Loop disconnect will not be supported on the future 21CN phone network, and manufacturers have been told to phase it out.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I updated Fox fire and I have lost the add on auto dial .. I have tried to redown load the add on and it does not appear on my menu bar..

I had the add on auto dial then there was a Firefox upgrade and auto dial disappeared from my menu bar. I have tired to redown load auto dial. It says that it will be added when I restart Firefox. I restart in auto dial does not reappear.

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

How do I get rid of + in auto dial messages

I am in China and purchased a sim card from China Mobile and switched the mobile network on the phone so that I could use in China. When I call someone from contacts, the phone call gets a wrong number. I believe it is because of the + that gets placed in front of the number. When I punch in the phone number the call goes through. How do I get rid of the + on auto dials?

Hi michasr,
This is smart-dialing feature, by which can set a default country code and area code for phone numbers so that you do not have to dial a country code and area code each time that you make a call.
To Set the default country code and area code:
From the Home screen, press the Send key.
Press the Menu key.
Click Options.
Click Smart Dialing.
Set the Country Code and Area Code fields.
If necessary, set the Local Country Code and International Dialing Digits fields.
In the National Number Length field, set the default length for phone numbers in your country.
Press the Menu key.
Click Save.
Note: When you calculate the default length for phone numbers, include your area code and local number, but do not include your country code or the National Direct Dialing prefix.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Auto-Dial from SIP phones after Interdigit Timeout

I have a customer that needs to have their phones automatically dial a particular number if no digits are pressed after 10-15 seconds. We are accomplishing this right now with our SCCP phones by having a blank translation pattern that points to an ambiguous hunt pilot.
For example, we create a blank translation pattern that translates to a HP with number 300. We also create a HP with number 3000. The translation pattern is triggered, but because 300 is ambiguous (the call could possibly be destined for 300 or 3000) CUCM waits for the interdigit timeout before calling 300.
This works beautifully for SCCP phones. Unfortunately, it does not work for our SIP phones. Does anyone have any suggestions to make this work? SIP dial rules trigger immediately, so I'm afraid we haven't been able to leverage those.
Thank You!

Thanks for your comments, but I'm afraid you guys are missing the issue.
Chris, you are correct that you can get a SIP phone to auto-dial a number via SIP dial rules. The problem is that it triggers immediately. I need the SIP phones to wait.
Here's a scenario - SCCP phones are in use all throughout a nursing home. Residents are told that they can simply knock their phone offhook if they need emergency help. If they don't dial anything within 15 seconds, their phone will automatically call into the local emergency oncall nurse. Sorta an "onstar" emergency help line for an old folks home. We definitely can't have that rule triggering immediately though, as residents would never be able to place a normal call, and there would be no way of distinguishing the emergency calls from the guy who is just trying to call for pizza. :)
This function works perfectly with SCCP phones - while they trigger the blank translation pattern immediately, CUCM doesn't actually begin dialing because there are multiple potential matches for what the translation pattern is dialing. SIP phones do not do this, however. If you have the SIP dial rule applied, it always triggers immediately, and it does not wait to see if callers give any input.
Thanks for any further suggestions you might be able to offer!

Auto dial-up

Hello,
Wow, it's been a while since I've been here. Had to create a whole new ID.
Anyway, I got a new iMac G5 last week and phone support helped me figure out how to transfer files from my old Bondi RevB, OS/9.2.2---which is the one I'm having the current problem with.
Problem is now everytime I turn the Bondi back on it automatically dials up the internet. ie., I started it up this morning and didn't come back to the computer for about two hours and all that time it was dialed up and I didn't realize it.
Went to Control Panels>Remote Access>Options>Protocol and un-checked "Connect automatically when starting TCP/IP applications." That stopped it from dialing up when starting the computer, but it also stopped it from dialing (automatically) when launching Internet Explorer.
Bottom line...how can I make it so that it does not dial-up when turning the computer on, BUT will auto dial when launching IE.
As always, Thanks in advance.
P.S. Haven't been able to work too much with the new iMac, but it sure is "purty".

Neil,
Yes indeed, there was an HD alias in there. Thank you so much for the info. I've already trashed it. I'll let you know later whether or not that does the job---I really don't know what else I haven't investigated that could be the culprit. If this does solve the problem, do you know whether I will have to delete the alias each time after I file share?...or do I just have to wait and see?
I have a bit of surfing and work to do, so I don't want to log off and try it now, but I will definitely post back later tonight or tomorrow and let you (all) know.
Thanks again, Neil.

Can I turn OFF auto dialing?

I have a new iPhone 3G 8gb. I am looking for a way to turn off the auto dial feature when you tap on a recent call, favorite, etc. I keep accidentally dialing people...would like to find a way to prevent that. I look forward to suggestions!! Thanks.

There is not a way to do so except for not selecting a Favorite or a recent call. The Favorites option is designed for this very thing - a speed dial for the people you call most often, and select a recent call does the same.
You can select on the far right - the area with the right facing arrow in a blue circle icon and the number will not be automatically dialed. This can be used to view the contact info for a favorite, or to add a recent call to the address book if not already entered.

UC540 Auto Dial

Similar Messages

Maybe you are looking for