UC540 Dial-plan not working

Question

Hi All,
i have UC540 installed with 2 FXO cards connected to them 8 Analog lines the end user requirement to block outgoing calls form all phones except operator phone i apply the call permission for all phone as internal but they still can dial out .i have two rules one for local calls and one for international calls.
how can i block the out going calls for all phones expect operator.
thanks
Moe
note :config file attached

Answer 1

Hello Moe,
Reviewing your configuration, it looks like the corlist is configured correctly. Generally speaking, for cor to work you need:
1. Cor custom list
2. Actual list of cors to apply to the dial peers
3. The cor's linked to a dial peer
4. The cor's linked to the ephone-dn
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
name internal_second_line
name local_second_line
name local-plus_second_line
name international_second_line
name national_second_line
name national-plus_second_line
name emergency_second_line
name toll-free_second_line
name international_second_line_FAC
dial-peer cor list user-internal
member internal
member emergency
dial-peer voice 60 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*North American-7-digit*7-Digit Local**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9[2-9]......
forward-digits all
no sip-register
ephone-dn  281  dual-line
number 206 no-reg primary
label ******
description ******
name************
call-forward busy 399
call-forward noan 399 timeout 20
corlist incoming user-internal
translation-profile incoming CallBlocking
Cor configuration guide: http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml
Are you using CCA or CLI to configure this UC? What version of IOS is on the UC? If you are using CCA, what version?
Thanks,
-john