UCCX 10.5 AppAdmin Parameter - Not allowing a backslash to be added to string parameter - gets removed
I have a script where the prompt directory is a parameter exposed on the "Application Management" web page.
The way the script is structured is that it expects the directory name to have a backslash at the end of it. Example
In the script the full prompt path is created such as: (all variables are string)
FullPromptFile = DirectoryName\ + Filename.wav
In all the past versions of UCCX that I've worked with (4,7,8,8.5,9.x) I could edit the directory path name, as a parameter, on the AppAdmin web page including the trailing backslash and it would save and work properly.
In UCCX 10.5 when I save it, the backslash is simply removed. The save appears to work correctly but going back to the webpage the backslash at the end of the string (inside the quotes) is simply gone.
Tested in multiple browsers (IE 10 and FF 30) and multiple workstations
See screen captures below.
After the Save
I opened a TAC case on this issue.
Turns out this change was made in UCCX 10.0 and forward.
Prior to 10.0, the backslash was accepted in the web interface for an application parameter.
The fix is to use a forward slash in all file and URL paths.
The interesting part, the script "engine" still works fine with file and directory paths using a backslash in 10.5. Its only the web interface change, under app admin, that is causing the issue.
I agree with TAC's recommendation that all file and URL paths use the forward slash instead of the backslash on the Linux platform. This is the case of using scripts previously developed and that used to work but should have been changed to use the new Linux method.
There was nothing in the release notes about this.
Heads up to all.
Similar Messages
-
PLEASE HELP - I recently changed my email password on my computer...the email is also on my iPad. I can log on the computer with the 'new' password, however, the iPad is not allowing me to log in. I continue to get the 'incorrect password' message. Please advise.
I'm sorry you're having issues with your e-mail account on your phone Rusty1112. Let's figure out what's going on. First, please try deleting account/information again and then restart phone. When phone is back on, try adding e-mail account again, and be sure you're entering exactly as you set up, meaning its case-sensitive. If you're still getting same error, please let us know and let us know what e-mail account it is, Yahoo, AOL, MSN, etc.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport -
i purchased a tv series on itunes it allowed us to download 1-5 show but will not allow us to download anymore what can i do to get them to download or get a refund
Why can't you download more?
Did you run out of space?
Hi def episode of a tv show, 1 hour long, are about 2 Gb an episode. -
One song is not allowed to play on my iMac, I'm prompted to authorize the iMac. SC Info folder removed, still the song cannot be played. Mac OS 10.8.5 !!!
Got it! Look at the information of the song (right click in your itunes library) and if you don't see yourself as a buyer of the song, you have to delete the song and download it from the store again.
-
Name "watch" as request parameter not allowed or reserved?
Good morning, all
I just did a strange observation about the usage of parameter name "watch" in an <f:param> tag in the following way:
<h:commandLink action="#{MBUser.watchSelected}">
<f:param name="watch" value="#{orgtree.identifier}"/>
<h:outputText value="#{msg.Details}" styleClass="text_tree_link"/>
</h:commandLink>
This tag group is nested in a MyFaces tree2 component and the "watch" parameter is taken from the faces context in a managed bean.
If I change the name to anything else ("xxxxx", "wat") the orgtree.identifier has the right data. Using name "watch" results in an empty request parameter value "".
Has anybody encountered this problem? Is this problem maybe related to MyFaces?
Thanks for sharing more information about this doubt.
All the best,
AlexanderThanks for replying.
This is what I have in the WEB-INF/lib folder of my project:
188.671 commons-beanutils-1.7.0.jar
46.725 commons-codec-1.3.jar
559.366 commons-collections-3.1.jar
168.446 commons-digester-1.6.jar
112.341 commons-el-1.0.jar
22.379 commons-fileupload.jar
207.723 commons-lang-2.1.jar
38.015 commons-logging-1.0.4.jar
84.462 commons-validator.jar
112.341 commons.jar
170.389 concurrent.jar
1.847.334 hibernate3.jar
65.425 jakarta-oro.jar
665.190 jboss-aop-jdk50.jar
285.423 jboss-aspect-library-jdk50.jar
180.060 jboss-client.jar
811.503 jboss-common-client.jar
438.017 jboss-ejb3.jar
18.037 jboss-ejb3x.jar
424.123 jboss-j2ee.jar
285.649 jboss-remoting.jar
52.653 jboss-transaction-client.jar
142.791 jbosssx-client.jar
25.903 jnp-client.jar
16.923 jstl-1.1.0.jar
352.668 log4j-1.2.8.jar
252.043 myfaces-api-1.1.3.jar
524.026 myfaces-impl-1.1.3.jar
17.090 portlet-api.jar
363.490 standard.jar
543.706 struts.jar
1.250.136 tomahawk-1.1.2.jar
About the problem: Maybe it is very difficult to reproduce since it sits in a complex environment, composed by a tree2 component in a panelGrid.
Also I could fix the error by using another parameter name, so for the moment, we are not blocked, but I consider that reports of this kind can be useful to colleague developers.
Cheers,
Alexander -
Error msg: "Blank access parameter not allowed" while saving the salesorder
Hi Every one,
I am facing with one standard error message while trying to selects the print option and output type and saves the output the error appears.
Can any one please suggest me on this.
Thanks,
ManjuHi,
Maintain the correct configuration settings.
Also maintain the correct values for your condition records.
Debug the code with the help of your ABAPer so that we can know that blank value.
Regards,
Krishna. -
My apple tv is not allowed a gateway thru my router..how do get around thi
my apple tv will not go through my router and communicate with pc. does anyone know of a solution for this
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
Refer to your router manual/manufacturer for any settings that are specific to that model. -
When I put any word on the Google Firefox like "staples" or anything, it comes back to me that it is an
unsecure site and it will not connect me. I have been dealing with this for a week now and it only
happened when Yahoo tried to take over my google and I did a restore with firefox. I am 68 years old
and not really experienced with these computers and do not know what to do.Actually, I don't think robots are allowed to register as contributors on this forum...
Could you describe this problem in more detail. In particular, are you getting search results from Google, but then you can't visit the links in the results, or are you not able to get any Google search results?
Does it make any difference if you start from the Google home page: https://www.google.com/ ? -
HI hoping for help pls, laptop was recently repaired& cloned, now will not recognise iphone or ipad, only sees iphone as a camera. Have spent ages trying to reinstall itunes to get so far and for it to fail. TRying desperately to reinstall driver for iphone now , have gotten as far as last steps to find folder in cdrive, found mobile file and there is no driver file at all. Am not the brightest tech lady so any easy to understand tips please am lost and cannot sync either pad or phone.
you have a ps cs4 license for mac and you have some way of finding your serial number.
if yes, download an install the installation file. if you already have the installation file, what is its name and file extension? (eg, if it's one file, it should be a dmg file.)
if you need the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Unable to open my Fedtraveler web site due to message about incompatible browser message that seems to be a continual problem coming from Firefox based on other posts by different patrons of your service. Yet Firefox indicates MAC users can only open certain sites with Firefox only. I think the FF administrators and IT folks need to seriously take a look at their application and get the issue resolved.
I've posted the message below in the 'troubleshooting' field. Please get this fixed asap. I need to access some FF claims can only be opened with them if using a MAC.*FIREFOX* is still giving this same message to MAC users: 9.0.1 is the latest version as of January 2012.
We were unable to determine which browser you are using. Please switch to a browser on the list of supported browsers below.
Your browser is not supported which means it may not contain all of the required functions to ensure the correct operation of FedTraveler.com. FedTraveler.com continues to improve its support of multiple web browsers for your convenience; however, some browsers may contain security vulnerabilities that can be maliciously abused to expose confidential information. Therefore, it is recommended that you use a browser supported by FedTraveler.com to ensure you have both a quality web experience and your private information is better protected.
We support the following browsers and versions.
Internet Explorer 7.0, 8.0 and 9.0
Firefox 3.0, 3.5, 3.6, 4.0, 5.0, 6.0 and 7.0
Partial Support for: IE 6.0 and FF 8.0
Macintosh users are encouraged to only use the Firefox browser. -
After I install iTunes 10.5.2 and open iTunes a window opens stating "The registry settings used by the iTunes drivers for importing and CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." This happens everytime.
After that on one occasion a window stated "Itunes msi) was missing. Upon uninstalling and reinstalling that disapeared. Now I get a window stating, (A required Itunes component is not installed. Please repair or reinstall Itunes.(_42404)"To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
Printer Setup Utility will not allow new driver to be added
I just bought a Canon Pixma MP960, installed the drivers and then downloaded the driver from their website. When I go to add a new driver in Printer Setup Utility--i highlight the MP960 connected thru USB, but the 'add' feature is not lit up. When i have it search for new drivers, it detects a new driver, but when I hit 'add'--Printer Setup Utility "unexpectedly quits" every time. The only drivers in there are beta thingies that do not work w/ my printer.
The Canon tech guy says that there is a problem with my Printer Setup Utility--but i can't seem to find a solution online. I don't know much about macs, but can I update the Printer Utility program or something? help!Part of the problem might be if you actually have more than one version of the driver for the printer installed on the computer. Check the drivers at Mac OS X disk/Library/Printers/Canon/ and make sure there is only one plugin for the printer. If you have more than one, trash both and download and install only the driver from Canon that is compatible for Mac OS X 10.4.x. After you install the driver, run Repair Disk Permissions using Disk Utility. If you have only one correct printer driver plugin installed, it should work.
-
I have moved to i cloud and ical event is not allowing file attachment to be added
I have set up icloud and now when I enter an event in Ical there doesn't appear to be a way to attach a file. I heve tried dragging the file over the event editor as per help, but that doesn't work and there is not menu item for attachments that I can find.
Surely this facility shoudl still be there.The attach feature works only on calendars OnMyMac. Alternatively you can add an URL to your file:
open event and Edit it
drag the file
drop the file on URL field
Press OK button
When you click on URL link, folder containing the file opens. -
I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either
Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile. -
In the previous release, iTunes 10.4.080, I had no problem with drag & drop of movies (.mp4) from a windows folder to the Movies library. After installing 10.5 today I have lost the ability to sync my own .mp4 content with my iPad. Any help or suggestions would be appreciated.
Similar problem here, one pc with iTunes 10.4, the other with a fresh install of everything, including iTunes 10.5. My online classes use iTunes U for lectures. They download fine on the 10.4 version but 10.5 does not save them at all. I am now actively searching for a 10.4 install executable......
Maybe you are looking for
-
How to get the 4 digits year from 2 digits
Hi , I have a column which stores the last two digits of the year like 08,09,10 etc.. Now I need to get the complete year number from these two digits. Is there any function in oracle which will help this purpose. Thanks,
-
Automatic acceptance of Service entry Sheet
Hi, We have requirement like whenever the service entry sheet create automatically through CATM it should get service acceptance automatically
-
Some of my text messages are in blue and some are in green. why is that?
Some of my outgoing messages are blue and some of them are green. why is that?
-
Bug: Keynote says install but won't
bug: I already owned copies of iWorks. In the store, Keynote says install but won't-nothing happens when you click on the install button.There was no problem with Numbers or Pages which installed smoothly.
-
Interference using Apple TV to Freeview Digital reception
Recently found that when leaving Apple TV on standby and Recording Digital Freeview the sound on the programme and recording of that programme are distorted, yet when Apple TV switched Off at mains the sound is OK. Anyone suffered the same, Recorder