UCCX 9.0.2 set agent to "Ready" after initial login

I am trying to get agents to go "Ready" automatically after login.
I tried to do a workflow macro in "Agent Managment Workflow" - Start-Up but it doesn't seem to work.
[DELAY] 17000
[APPLICATION:AGENT_DESKTOP=NOT READY - CISCO AGENT DESKTOP]
[CONTROL] W
Any other ideas?
-KG

Hi KG,
I personally think that its not good design . but you can check the document for autologout
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-contact-center-express/112113-cda-logout-00.html
This document is for autologout agent in specified time . you can make agent ready just after login
if you select event as login . I have tested and verified this in Lab .
Regards
Ravi

Similar Messages

CAD set agent to ready state on startup?

Hi All,
Is there a way to force the agents to be set in ‘Ready’ when they load CAD? Rather than them having to load CAD then click the icon to make themselves ready?
We are using UCCX 8.5.
Thanks in advance.
Matty

Agent MUST go ready manually for the first time ( post login to CAD ), after that going to ready automatically from not-ready/wrap up can be controlled from workflow.
Pls rate the post if it helps.
GP.

Setting agent's default state to Ready in CAD

Hi,
We are using UCCX 7.0 with CAD 6.0. Is it possible to set the default state of the agent to Ready when they login to their CAD.Right now, they go to the default Not Ready state one they login.
Thanks,
DM

Hi
By design CAD agent initial state after login is always not ready and there is no specific setting in uccx were you can change this behanviour.
However you can check this post were they suggest to create a MACRO
https://supportforums.cisco.com/message/3264497#3264497
Regards
Anuj

UCCE 7.5 Set agents back to ready after Rona?

Hi All
Is there any way in UCCE that you can set agents back to ready if they are put to not ready after RONA? I know there is a global option for this in UCCX but not sure about UCCE? They are using CAD 7.5 and UCCE 7.5.
If not any other work around that you may know of?
Thanks,
Matt

The only way I know that you can do it, is to se tthe Agent Desk Setting RONA, 1 seconds HIGHER then the CVP RONA timer.
Therefore is CVP is 15 seconds, set the Agents Desk Settings to 16.
This will prevent the Agent Desk settings from moving the agent to Not Ready.
CVP allows the use of custom RONA timers with SIP, so if its just for a few agents you may need to add specific routes for their extensions with the appropriate CVP RONA timers.
Cheers,
Chad

Agent reserved state set to Not Ready

HI
I get this error very randomly on CAD with one agent .
"your agent state has been set to not ready by the pim because some calls were routed to you and haven't been received.Please ask your administrator for help."
no issue with agent desk settings,device target or with PG user.
>login on different phones still same issue.
please suggest.

Now we are getting this error on multiple agents randomly.
we found this error on cmpg
15:25:06:620 pg4A-pim1 Trace: FreePreRoutedCall: Head Inst: N26008 CreatedByPreCall: T PeriphCID: -1 Queue Count: 0 RouterCallKey=(149897/92397)
15:25:08:088 pg4A-pim1 Trace: TelephonyDriver::CSTASupervisorAssist: No dialed number for ID -1
15:25:08:088 pg4A-pim1 Trace: DeskLinkPeripheral::SetAlert - (TelephonyDriver::CSTASupervisorAssist) Setting ERROR Alert #9 - 15:25:8 DialedNumber

UCCX abandoned calls when agents are ready

We are running CME 7.1.3.32900-4 and UCCX Premium 7.0(1)SR04_Build 443. We are having a problem with agents going into reserved state for a call but the call never gets delivered to the agent's phone. Since the call goes unanswered, it is marked "abandoned" and gets dropped even though several agents are ready to accept calls. I did a reboot on the UCCX primary and secondary servers and I also reset the voice gateways. Does anyone have any idea what causes this behavior and how to correct it?

Hello,
I had it before with UCCX 7.0 and it was a BUG.
check these two bugs in 7.0
CSCtc32123
UCCX 7.x Select Resource Step reaches 1000 step max and fails
CSCsz93333
Modifying CSQ variable in the Select Resource Step after queuing a
call
Those two caused a group of agents to go to reserve state for like 60 agents causing the calls to DROP.
these problems resolved in SR4 with ES02 , as i understand you already have the SR4 , so i suggest to opne a TAC so that they can give you the ES .
BTW , this is happened to me before like 1 and half years , i didn't check if there is a later version of SR for the UCCX 7.0 , if there is check the cavateas on the next SR maybe they solved the problem without the need for the ES.
Hope this helps.
Amer

Make CAD agents to go ready state upon login

hi all,
hope someone can help. running uccx 8.0. when agents log into CAD, it always put them in not ready state. is there a way to make them go ready right away upon login.
thanks
vijay

Hi Vijay,
Agent State Action
An Agent State action enables you to select an agent state to associate with an event.
Agent State actions can be associated only with Answered and Dropped events. The
only valid agent states are Login, Logout, Ready, Not Ready, and Work.
To set up an Agent State action:
1.Set up a new action. See “Adding a New Action” on page 98. The Select Action window appears.
2.Select the Agent State tab, and then click New. The Agent State Action Setup box appears (Figure 49).
3.Enter a name for the action, select the agent state control from the drop-down list, and then click OK
Please refer the CDA guide for more information,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cda85ccxug-cm.pdf
Hope this helps.
Anand
Please rate helpful posts by clicking on the stars below the right answers !!

UCCX 5.02 Copy/Move Agent Recordings

UCCX 5.02 Copy/Move Agent Recordings
We are running UCCX 5.02 and have a workflow setup to automatically record all agent calls without Supervisor intervention. We are not using QM. Is there a UCCX tool, other than writing a .bat file and scheduling it, that will copy/move the recordings to another location automatically?
Thanks!!!
Adam

Hi
See attached for a script a wrote to archive the .raw files created by CRS to .wav format on a Windows network share. All activities carried out by the script are logged to text file for reference.
Use at your own risk!
Be aware that it doesn't 'clean out' entries from the databases, so if you allow the script to remove files from the CRS server the recordings will appear in Supervisor desktop until they expire.
To run the script, read it carefully, check the parameters, and rename it to .vbs.
It should then be added as a Scheduled Task and executed as a local administrator on the CRS server itself. On a HA setup, set up the scheduled task on each recording server.
If you use it, please rate my post!
Aaron

Not able to generate UCCX Historical Report of one agent

Dear All,
I am not able to generate the UCCX Historical report of the agent as the Historical reports of the agent is generating upto the Feburary 2013 but we are not able to view the Historical Report of March 2013 and onwards, the realtime reports are generating and the agent name is added to the Active Directory only once, help is required in this regard.
Best Regards,
Durraze Khan

Rajesh,
Put a breakpoint and try to debug the report step by step.
You will findout the reason very easily.
Whenever you have a select and are trying to append into an internal table, keep checking your internal table if it is been populated with the correct records.
This way, you will findout the cause and can correct is accordingly.
Thanks,
Suresh Ganti

Agent going to not ready after call hangup, Siebel CRM Connector, reason code 50002

Hi Everyone,
We have Contact Center Enterprise UCCE 8.5.2 with CTOS integrated Siebel CRM 8.1.1 using
Cisco Unified CRM connector
On daily basis we are receiving about 100 incidents that Agents goes to not ready after
talking to customer. and the reporting gives the reason code 50002.
As per Cisco its because of CTI server Failure/Agent desktop closed/network Problem. But
In real there is no network issue, Agent not closing the Agent desktop. Also if this is
the case agent should be logged out but in pratical its stays logged in but moved to
not-ready state(Reason 50002)
It could be miss communication between UCCE and Siebal CRM connector.
One more thing its not happening with one customer only it happening in many deployment on
Version 8. Especially the one integrated with Siebel.
If anyone face the same issue please share the experience and the solution if found any!
Regards,
Atif Tanveer

Atif,
If memory serves me right, CTI events are controlled and communicated by Siebel connector. So when your users close Siebel or any other CTI controlling connector this will be same as closing CTIOS or CAD without proper logoff. This will keep the phone out of synch and keep the user automatically into not ready to prevent any callers going to this device.
Simple answer you have to train users and make sure they close Close applications properly.
Thanks,
Baseer.

UCCX 8.5.1 SU3 agent get license error on signon

Hi,
Having an intermintent issue on UCCX 8.5.1 SU3 w/CUCM 8.6.2 SU2.
From the agent debug logs, the day before the closing of CAD doesn't shutdown nicely it looks like (user did not report any errors at end of day when they shut down). The next morning they get licensing error when they try to log in and relaunch CAD 2-3 times then they can log in.
The CAD version is correct and the LRM logs from server don't show this agent attempting to log in during the error, and the LRM log file only shows a successful log in from this agents PC IP address on the successful login. I restarted the LRM service to see if it helps today. Single UCCX server (no HA).
AGENT DEBUG LOGS:
2013-03-18 18:09:19:128 WARN DESK2121 Unable to write agent state change to RASCAL: GID=1363615138 Error=CORBA error.
2013-03-18 18:09:20:267 WARN DESK2126 Unable to write call data to RASCAL: GID= 1363615138 Error=Client recovering connection to server
2013-03-18 18:09:44:821 WARN DESK2018 Unable to update wrapup data to RASCAL: GID=1363615138 Error=Client recovering connection to server
2013-03-18 18:09:44:821 WARN DESK2121 Unable to write agent state change to RASCAL: GID=1363615138 Error=Client recovering connection to server
2013-03-18 18:10:26:130 INFO DESK1004 RASCAL auto-recovery message received.
2013-03-18 18:10:26:161 INFO DESK1141 RASCAL Server Feature auto-recovery message received.
2013-03-18 18:15:06:259 WARN STD3000 Get registry key <MTS_CitrixInstall> under path <SOFTWARE\Calabrio\CAD\Site Setup>. Object not found: <2:The system cannot find the file specified.>.
2013-03-18 18:15:07:336 INFO SOCKET0000 <CADEEMConnector> service on port <59015> has started.
2013-03-18 18:15:10:112 INFO VOIP4005 Desktop monitoring disabled for extension [1047].
2013-03-18 18:15:11:782 ERROR DESK3007 Chat DropUser failed.
2013-03-18 18:15:11:782 INFO DESK1053 Remaining time <2000>
2013-03-18 18:15:11:782 INFO DESK1054 We received AS_LOGOUT so close CAD window.
2013-03-18 18:15:12:187 INFO DESK1049 Releasing Agent License...
2013-03-18 18:15:12:203 ERROR DESK3113 Unknown exception while releasing the license(s)
2013-03-18 18:15:12:484 INFO STD0005 Client <Calabrio LDAP> disconnected from service at <10.1.1.10>.
2013-03-18 18:15:12:593 INFO DESK1006 LDAP auto-recovery message received.
2013-03-18 18:15:12:593 ERROR FCCC2009 Unexpected exception (Unexpected exception in Chat client service thread).
The next morning, when they log in..
2013-03-19 09:59:09:009 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:009 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:025 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:025 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:025 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:025 INFO LC0007 Invalid Value.
2013-03-19 09:59:09:072 INFO STD0000 Starting preference change event dispatch thread.
2013-03-19 09:59:10:179 INFO LC0000 Connected to Calabrio LDAP server on <10.1.1.10>.
2013-03-19 09:59:10:179 INFO STD0004 Client <Calabrio LDAP> connected to service at <10.1.1.10>.
2013-03-19 09:59:10:382 INFO DESK1122 Get Update Flag from LDAP successfully.
2013-03-19 09:59:10:554 INFO SPUD0000 Successfully launched update from <C:\Program Files\Common Files\CAD\bin\update.exe>.
2013-03-19 09:59:18:488 ERROR DESK3109 Could not obtain license from LRM.
2013-03-19 09:59:19:600 ERROR DESK3113 Unknown exception while releasing the license(s)
2013-03-19 09:59:19:600 ERROR DESK3113 Unknown exception while releasing the license(s)
2013-03-19 09:59:19:614 INFO STD0005 Client <Calabrio LDAP> disconnected from service at <10.1.11.10>.

Hi,
DESK3109 Text: Could not obtain license from LRM.
Type: Error
Add’l Info: LRM is not running.
Action: check if the server is running
DESK3113 Text: Unknown exception while releasing the
license(s)
Type: Error
Add’l Info: LRM is not running
Action: check if the server is running
FCCC2009 Text: Unexpected exception.
Type: Fatal
Add’l Info: CTIOS API waitforsingleobject fails.
Action: Check system resource availability (CPU and
memory).
Reference:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/reference/guide/cad85ccxecd.pdf
I would suggest you to please restart the UCCX servers or LRM service specifically in your maintainance window and see if it helps.
Thanks,
Anand
Please rate helpful posts !!

UCCX 9/SocialMiner Web Chat Agent Name

Hi,
We recently implemented SocialMiner in a DMZ to allow for the web chat support feature to integrate with our UCCX 9. I've run successful tests, but I have a question regarding the agent name that displays in the chat window. Currently, the agent name is showing as their Active Directory username, which is a first/middle initial and last name. Is there a way to change that so it only shows the First Name of the agent? We're concerned about privacy for our agents.
See screenshot below.
Thanks for your help!
Kevin

Hi
so i double checked and masking of "agent name "is not possible as of the moment by any configurable settings on UCCX
it will always show "
"Agent ID" + "(Customer Rep.)" in chat room"
i hope this clarifies your questions,
Regards
Anurag Siddhu

Agent31 - agent not ready details - report

Dear All,
We are in the position to provide explanation to the customer about the agent31 - agent not ready details report
I herewith attached the screen shot of report, where i can see not ready duplicated two times as below
reason code as 0 and 20003, and just gone through the explanation for 20003 found as below
20003 - applicable if you are using the Cisco Agent Desktop
If the agent is not in Not Ready state, a request is made toplace the agent in Not Ready state and then a logout requestis made to log the agent out.
But customer doesn't use CAD they use web based customized cti tool.
Please update with clarification or your idea.
with Regards,
Manivannan

Hi,
actually, the report shows what the ICM historical database tables contain - they contain what was written into those tables - ICM writes there whatever it was instructed to.
So if your web based custom agent tool writes 20003 (or anything), then it will appear in the report.
G.

Agent installation stuck on initial stage

The agent never get installed successfully. It is on initial status forever during installation. After reboot, the agent service does not start. Anyone see this
problem.

On 04/05/2010 16:26, Donald Wu wrote:
> On 12/04/2010 15:56, jblackett wrote:
>>
>> Can you provide any more info? What platform are you installing the
>> agent on? We have seen a problem where the SETUP.EXE for the ZESM
>> components of the agent hang on an XP install. We are investigating the
>> cause. We have also seen the same on devices that have unsupported
>> Windows 7 device drivers. If you can provide some more info I'll see
>> what we can figure out.
>>
>> Jason
>>
>>
> It is XP SP3, installer 3.01.4001.5512. I de-select endpoint security,
> imaging, remote control installation on zcc agent setting, but it has
> not effect.
>
> I then upgrade the installer to 4.5.6001.22159, but it does not fix it.
>
> The installer package is full standalone with .net.
>
> Donald
More information:
It also has Zenworks 7 agent installed. I did a further test as below
1. upgrade installer to 4.5.6001.22159
2. install zcm11 agent, it is on initial stage forever.
3. re-boot the machine. zenworks agent service did not start, but
Novell application launch service(a zenworks 7 service I think) did.
However the Novell Application Launch service entry has been removed
(I think it is done by zcm agent after reboot, but the service has
already started)
4. manual start the zcm zenworks agent service, it works fine.
5. re-boot again, agent service start automatically.
Does anyone know how to log the installation process?
Donald

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

UCCX 9.0.2 set agent to "Ready" after initial login

Similar Messages

Maybe you are looking for