UCCX integration with subscriber

Hi,
We have CUCM publisher implemented in MCS server in site 1, we have CUCM subscriber in site 2 which is in UCS server, can we install UCCX in site 2 integrating with subscriber,if I have enough system resources in UCS server,let me know whether it is feasible or we have any challenges.
Thanks,
Baskar.

Hi Baskar,
Having a mix of UCS and MCS servers is not a problem, having a UCCX to the sub at site 2 should be OK as well as long as the RTT is less than 80ms between CUCM servers.
I found this doc that talks a little bit about what happens when there is a WAN outage, in their scenario they have a UCCX HA over the wan which does not seem to be your case but still has some good stuff.
https://supportforums.cisco.com/document/129111/chalk-talk-what-not-do-uccx
-Roy

Similar Messages

UCCX Integration with ITSM Tool

Dear
We are running Cisco UCCX 8.5 in our environment. We are in process of integrate the ticketing system with Contact Centre.
Our developer needs to develop connector between Agent and Heat Service Management to get data depend on Caller ID
When phone rings, we need to get caller id to show popup screen with customer data and history from our system
how CISCO help us with this issue to get caller id by service or api.
Kindly suggest the best way to do it or if anyone has done it please guide us.
Regards
M Taha

There are a few ways of doing it but you should be aware that most of these are due to be deprecated when Cisco replaces CAD with Finesse, a browser-based OpenSocial UI. A specific timeline for this is not publicly available; you can speak with your Cisco AM/SE to get additional details. It is not yet clear which integration options will exist through Finesse. Almost all of these options require Premium licensing.
Send an HTTP GET/POST event from within the AEF script. You would need to adjust your Select Resource parameter Connect = no. This would change the Connected branch to a Selected branch. You need to embed a Connect step within it; however, you can add HTTP steps prior to that which can push a URL containing the agent username and the caller ID for example. This has the advantage of making CAD irelevent.
Utilizing CAD gives you several additional options. These are explained in detail in the CDA User Guide (starting around page 97)
Send an Inter-Process Call event to the other local application
Run a keystroke macro to copy and paste variable data into another window.
Launch an external application (including command-line switch options)
Send an HTTP GET/POST message using the CAD Integrated browser
Please remember to rate helpful responses and identify helpful or correct answers.

UCCX integration with Service Now

Hi all,
Has anyone ever integrated Cisco UCCX 8.5 with a ticketing system called Service Now (http://www.servicenow.com/)
I have a customer who is now using this system and would like to integrate UCCX 8.5 for screen pops etc.
Cheers
Darren

Hi Darren
Thanks for the White Paper regarding the integration method between CAD and Service Now. looking over the white paper and will be looking to implement this solution in the near future.
Cheers and Have a Great Day
Rick Hayes
FGL Sports

UCCX integration with Remedy ITSM-7

Is it possible to integrate UCCX with Remedy ITSM-7 ? if not does it require CRM Connector . Please advice

Is Remedy ITSM-7 the same as BMC Remedy Action Request System 7.1?
What kind of integration you're looking for? If it's just HTTP get/post then it can be done directly through the Desktop Admin Workflow. Otherwise, a tighter integration is required.
Thanks!
-JT-

UCCX integration with Oracle DB

Hi All,
I am having an interesting problem when connecting to Oracle 10 G from my UCCX 8.5 script. I am able to connect to Oracle and run the querries successfully when I load the JDBC driver from the database subsystem and use the DB-Read/DB-Get node in my script.
The problem is when I try to use my custom java class to achieve the same functionality. Infact, we have an extended piece of application that is written in java and does the similar functionality we need in the IVR script.
We simply loaded all the required jar files including the JDBC driver jar file from the document management area and then selected all of them from System > Custom File configuration.
Even a very simple java query fails and I get absolutely no response on my UCCX script.
Any other custom java files that don't interact with Oracle works fine, but the one connecting with oracle and running a simple SELECT query FAILS.
Thanks in advance,

Any exceptions or stack traces would be helpful.
Sent from Cisco Technical Support iPhone App

Way of External Database Integration with UCCX

Hi
I want to know what are the way of UCCX integration with External Database(Mobile Operator, Banking, Insurance).I only know about DBwrite and DBGet. is there any way out(http, https,SOAP)? They dont want to give me direct access to there Databases.
Sultan Al Arif

One way to do this would be to use the Get URL Document step to request an XML file from a web server.
Upon receiving this request the web server would then retrieve the required data via SQL (fairly easy to do using ASP.NET and IIS), format it in an XML page and return it to your script.
The script would then use Get XML Document Data steps to parse the XML file for the required data.
The organisations that operate the databases with which you want to integrate may have some concerns about the security of this though as the data will not be encrypted in transit.

CCIE Collaboration - Integrating UCCX 9 with CUCM 9

Hello guys,
I just saw that video integrating UCCX 9 with CUCM 9 .hope you will like it..
http://voicebootcamp.com/index.php/free-video-labs/video/latest/uccx9
enjoy..

No, it's not. You are reading it correctly. None of the UCCX 9x versions support CUCM 7x.
The last UCCX version to support CUCM 7x was 8.0(2)SU4.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Cisco UCCX 8 - Integration with SAP BCM

Hi
Can Cisco UCCX 8 be integrated with SAP BCM for the crm requirements?
Thanks,

I have heard that these guys offer an integration but have not worked with them myself: http://www.tcandc.com/cisconn

SMS gateway integration with UCCX 7.0

I have a question, can we perform SMS gateway integration with Cisco Unified Contact Center Express 7.0 premuim license?

Just to enhance Somar's response a bit: The CCX Premium licnese activates an SMTP subsystem in CCX. This allows you to send emails from within a script. As long as the SMS gateway can accept SMTP you should be able to make it work.

Integrating multiple UCCX clusters with same Call Manager Cluster

I want to know if I can integrate multiple UCCX clusters with 1 Call Manager cluster? If yes, can someone please point me to the documentation.
I appreciate all the help..
Thanks!!!

Hi
Yes, you can. I'm not aware of specific documentation for this, but a couple of notes:
- Make sure you use unique resource accounts (e.g. JT user in particular as that is automatically managed by UCCX and one cluster WILL break the other)
- I would also use unique AXL accounts and probably RM accounts. RM you could share between clusters to just have one RM account to associate any agent phone to, but it's safer to have single-purpose service accounts.
- You can't assign a user to a particular cluster - so you enable IPCC Extension on one user, they appear in 'resources' on both UCCX servers.
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

SharePoint 2013 on-premises integration with third party email account

the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech Learner

Hi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Telephony Integration with WD4A

Hi experts,
I am currently investigating the feasability of re-writing and updating our 3rd party direct order entry system using Web Dynpro for Abap. One of the features of our current system written in visual basic is the telephone integration, ie incoming call details pop up on screen, interrupting the program and starting a new process.
I have been investigating how to achieve this through the events framework of WD4A applications. Ideally I would like to subscribe to an 'incoming call' event which will trigger upon recieving a call. Whilst looking through sdn and help pages I have found a lot of information on ICI, ANI and such but nothing yet on how I might actually implement a system described above.
Has anyone attempted such a scenario within WD4A or can suggest how such a result might be achieved?

There are a number of ISV solutions available for CTI integration with Dynamics CRM, such as
mscrm-addons and c360. Beyond those, there are a number of VoIP providers that offer a Dynamics CRM CTI integration, such as
Cisco, Genesys, and Avaya. Finally, Microsoft has released their own Customer Care Accelerator:
http://dynamics-crm.pinpoint.microsoft.com/en-US/applications/customer-care-accelerator-for-microsoft-dynamics-crm-2011-12884914795
--Dodd

UCCX Chat with Social Miner

Hello,
I have been testing UCCX 9.0 Chat functionality integrated with Social Miner, and found the following things:
There is a way to configure UCCX in such a way that, Chat sessions will not be presented to Agent, if that Agent is already on a Voice Call. This is ok.
But when testing inverse, I have found that, when Agent is having an active Chat session, the Voice call is still presented to operator if he/she were in Ready state. So Agent should manually set the Voice state to Not Ready each time, so that when chatting the new voice calls will not get to him.
Well, is there a way to tell UCCX not to send new Voice calls to Busy with Chat Agents automatically, so that Agent will not have to change the state manually each time as the new Chat session is presented?

Hi,
In UCCX, Voice calls always takes the priority over the email\chat. Inoreder to not get the Voice Calls Agents have to manually Push themselevs to Not-Ready state.
Thanks,
Anand
pls rate helpful posts !!

CUC 8.5 UM integration with multiple AD Forest

Hi Guys,
I need to do a unity connection 8.5 UM integration with exchange 2003 and 2010 in two different AD Forest. AD 2003/exchange 2003 is in one Forest (Account Forest) with 2003 mailboxes on a corporate network AND AD 2008/exchange 2010 is in second Forest (Resource Forest) with 2010 mailboxes in the CLOUD. There is also a trust relationship between 2 AD Forest. As per unity connection 8.x SRND, we must create separate unified messaging services account (AD account) for each Forest.
Given the above scenario, I think we need 2 AD accounts, one on AD 2003 (for exchange 2003 mailboxes) and second one on AD 2008 (for exchange 2010 mailboxes). However, in this configuration if mailboxes are moved from 2003 to 2010 we will have to manually disassociate the unity connection subscriber mailbox with unified messaging service account (AD 2003 account) and re-associate it with unified messaging service account (AD 2008 account), is that correct? or is there a way to automate this if the mailboxes are moved to 2010 unity connection automatically detects the change?
Any pointers in the right direction would be much appreciated.
Thanks

Can any one comment on this please? Perhaps TAC engineers might be able to provide some insight?
Thanks

Integration with MQ 6.0

We have a requirement to integrate Oracle BPM with MQ version 6.0. The trigger point for instance creation would be the messages subscibed from MQ. Please let me know if there is any example showing the integration or any helpful documentation. Thanks in advance.

Hi,
I don't know of any documentation, but here are the steps a friend documented a couple years ago:
The MQ installer makes some changes to the environment variables, so restart Windows to ensure current settings are used.
1) Start the MQ Queue Manager
To start the queue manager, launch the WebSphere MQ Explorer (Start->Programs->IBM WebSphere MQ->WebShere MQ Explorer). Right-click on the queue manager and select Start:
2) Enable WebSphere MQ Publish/Subscribe (i.e. JMS Topic) Functionality
WebSphere MQ does not support JMS Topics out-of-the box. To enable this functionality, you'll need to do the following (QM_beaee06 is the name of my queue manager, be sure to use the correct queue manager name for your installation):
REM -- This assumes you've installed in the default MQ directory
PROMPT> cd C:\Program Files\IBM\WebSphere MQ\bin
REM -- This will check the broker status. After installation it should be inactive
REM -- IF YOU GET A DIFFERENT MESSAGE, BE SURE THE QUEUE MANAGER IS RUNNING
PROMPT> dspmqbrk -m QM_beaee06
WebSphere MQ Publish/Subscribe broker for queue manager QM_beaee06 not active.
REM -- Start the broker
PROMPT> strmqbrk -m QM_beaee06
WebSphere MQ Publish/Subscribe broker started for queue manager QM_beaee06.
REM -- Now we can verify the broker is running
PROMPT> dspmqbrk -m QM_beaee06
WebSphere MQ Publish/Subscribe broker for queue manager QM_beaee06 running
REM -- Last, we need to run a WebSphere MQ script to enable publish/subscribe
PROMPT> runmqsc QM_beaee06 < ..\Java\bin\MQJMS_PSQ.mqsc
8 MQSC commands read.
No commands have a syntax error.
All valid MQSC commands were processed. 3) Create a Sample Queue and Topic
While you can use WebSphere MQ Explorer to add destinations using a GUI, it's quite easy to do it from the command line:
REM -- This assumes you've installed in the default MQ directory
PROMPT> cd C:\Program Files\IBM\WebSphere MQ\bin
REM -- This will launch an interactive shell where you'll enter the subsequent commands
REM -- Note that the runmqsc shell does NOT provide any prompts
PROMPT> runmqsc
define qlocal (ALBPM.SAMPLE.QUEUE)
define qlocal (ALBPM.SAMPLE.TOPIC)
end4) Configure the JMS Administered Objects in JNDI
WebSphere MQ makes it very easy to use Sun's File System JNDI repository, so that's what you'll use here (if your client already has a JNDI repository in place, it can be substituted here). Before configuring JNDI, create this directory: C:\JNDI-Directory
You'll also need to edit the JMSAdmin.config configuration file to specify your JNDI connection parameters – you can find this file in the C:\Program Files\IBM\WebSphere MQ\Java\bin directory. To use the file-based repository, ensure the following values are used:
INITIAL_CONTEXT_FACTORY=com.sun.jndi.fscontext.RefFSContextFactory
PROVIDER_URL=file:/C:/JNDI-DirectoryOnce the JNDI parameters are set, you're ready to launch the MQ's JMS Administration command line interface:
REM -- This assumes you've installed in the default MQ directory
PROMPT> cd C:\Program Files\IBM\WebSphere MQ\Java\bin
REM -- This will launch an interactive shell where you'll enter the subsequent commands
REM -- Note that the 'hostname' will default to 'localhost' and could have been omitted
PROMPT> JMSAdmin
InitCtx> define q(albpmQueue) queue(ALBPM.SAMPLE.QUEUE)
InitCtx> define qcf(albpmQCF) transport(client) hostname(localhost)
InitCtx> define t(albpmTopic) topic(ALBPM.SAMPLE.TOPIC)
InitCtx> define tcf(albpmTCF) transport(client) hostname(localhost)
InitCtx> end 5) Test WebSphere MQ with a Stand-Alone JMS Client
Use a generic JMS client to test. This enables you to quickly test connectivity to WebSphere MQ (or any other JMS broker). Always test integration with back-end services (whether it's a JMS broker or some other type of integration) from outside Oracle BPM before attempting it with the tool -- once it's working ouside Oracle BPM, it's typically trivial to get things working inside Oracle BPM.
6) Configure Oracle BPM to Use WebSphere MQ
Once you have successfully tested WebSphere MQ (or another JMS provider) using the stand-alone client, you can use the same configuration with Oracle BPM.
a. Verify the following Java libraries have been added as an external resource:
com.ibm.mq.jar
connector.jar
com.ibm.mqjms.jar
dhbcore.jar
fscontext.jar
providerutil.jar
The Java External Resource should not be marked versionable.
b. Verify the JNDI Provider is configured with the same configuration as the stand-alone client. The resource type is (somewhat confusingly) a J2EE Application Server and the security principal and credential are both left blank.
c. Verify the JMS Message Service external resource is correctly configured for the queue. It will lookup the Queue Connection Factory as well as the Queue itself using the JNDI resource previously defined.
d. Similarly verify another JMS Message Service resource has been configured for the topic. It too will use the same JNDI resource.
7) Execute the Oracle BPM Process
a. Add Global Automatic activities (one for the queue and another for the topic) that each create a new work item each time a message is received. The runtime properties settings for these should be respectively:
Global automatic type: "Executes when an event occurs"
Listener class: "Fuego.Msg.MessageQueueListener"
Component event types: "anyMsg: Java.Lang.Object"
and
Global automatic type: "Executes when an event occurs"
Listener class: "Fuego.Msg.TopicListener"
Component event types: "anyMsg: Java.Lang.Object"
The logic in the Global Automatic has:
componentArguments as Any[String]
componentArguments = [
"contextFactory" : "com.sun.jndi.ldap.LdapCtxFactory",
"providerURL" : "ldap://fgdal-test1:389/dc=fuegotech,dc=us",
"securityPrincipal" : "cn=root",
"securityCredentials": "password",
"factoryName"        : "cn=qcf1",
"queueName"          : "cn=q1"
logMessage "MQLIstener:: MQListener initialized with this arguments:\n" + componentArguments
    using severity = DEBUG
logMessage "MQ Message Received is " + arg.anyMsg using severity = DEBUG
processargs as String[String]
processargs["mqData"]=String(arg.anyMsg)
// this creates the instance in the process passing the message into the input argument "mqData"
result2 = ProcessInstance.create(arguments : processargs,argumentsSetName:"BeginIn")b. Deploy the process and start the server. Login to the Oracle BPM WorkSpace. Add a message to the queue and/or topic and the work item instance should show up in the Inbox immediately.
Hope this helps,
Dan

UCCX integration with subscriber

Similar Messages

Maybe you are looking for