Unable to calculate depreciation for 2008

Hi friends,
I would like to calculate depreciation for the fiscal year 2008.This is client requirement.He calculated depreciation 2008 and period-1.When he tried to execute depreciation for 2nd period he is getting problem
"Not all the documents in the last posting run were posted"
     Message no. AA 729
Diagnosis
     The posting session created in the last posting run was not completely
     processed. The last posting run was in fiscal year 2008, period 001,
     current number 01. A new posting run is only possible once the posting
     session has been processed completely.
Procedure
     Process the session created by the last posting run again. If this
     session no longer exists, you can create a new posting session that
     contains the missing posting documents. This function is found in the
     menu under "Recreate session." However, it is essential that no changes
     have been made in the meantime to the Customizing definition of the
     document number range.
After that i have analysed this situation. When i check TABA Table system showing document numbers are updated but document posted indicator X is not showing.
I have also checked FI documents it is not showing.
I have tried to recreate session but my problem has not been solved.
I found one SAP Note : 926062 - Errors AU265 or AA729 during RAJABS00 OR RABUCH00.It is the consulting issue.
Can anybody help me out resolve this situation and how can calculate depreciation ?
Thanks in Advance .

Dear Anji,
We had a similar situation. It was resolved for the period 1 and the once again system showed the same error while processing for period 3, same error 'Not all the documents.....
Procedure followed is this.
T.Code : AFBD for recreation of the session.
T.Code : SM37 the job wil show as finished and display will show as waiting.
but in spool display the log's last line will inform us to proces the session wainting in SM35
T.Code : SM35 process it by checking on Display Errors Only, and enter the appropriate transaction type (220)
After the above, we found the TABA table document number ranges are matching with FB03.
and the posting indicator is also updated.
Warm Regards
KV

Similar Messages

In repeat run, can i calculate Depreciation for perticular period.

Hi
when I calculate the depreciation in Repeat Run, It shows the message that for 12 periods only the Dep is calculated.
But I want to calculate the Dep for Particular period. Is it possible?????
If possible pl give me the suggession
Venkata Raju

Hi,
You can't do.
See below note:
It is possible to repeat the posting run within the period last posted. However, in contrast to the first run for a period, the repeat run can be restricted to specific assets. In the repeat run, the system posts changes to depreciation, as compared to the depreciation amounts from the previous run.
Normally the repeat run is carried out at the end of the fiscal year, if completing postings are necessary because of corrections to manual depreciation or depreciation terms.
Regards,
Murali

Unable to calculate DEPRECIATION

Hi All,
I am Doing CAPEX Planning for one of the client..
In Cape I am Calculating The Depreciation based on simple formula Depreciation=StdCapex/Life..
My LOgic is..
*XDIM_MEMBERSET RptCurrency=LC
*XDIM_MEMBERSET CAPACCOUNT=StdCapex,Life,Depreciation
*WHEN CAPACCOUNT
*IS "Stdcapex"
*REC(EXPRESSION=%VALUE%,CAPACCOUNT=Depreciation)
*IS "Depreciation"
REC(FACTOR=Depreciation(1/Life),CAPACCOUNT=Depreciation)
*ENDWHEN
*COMMIT
But it is not calculating any result..giving zero..
Please suggest any changes if there..
Regards,
Naresh.K

Hi,
Try this.
*XDIM_MEMBERSET RptCurrency=LC
*XDIM_MEMBERSET CAPACCOUNT=StdCapex,Life,Depreciation
*WHEN CAPACCOUNT
*IS "Stdcapex"
*REC(EXPRESSION=%VALUE%,CAPACCOUNT="Depreciation")
*IS "Depreciation"
REC(FACTOR=(%Value%(1/Get(CAPACCOUNT="Life")))
*ENDWHEN
*COMMIT
The reason for the error was that we cant use the ACCOUNT dimension members directly in the script
Regards
Raman

Depreciation for the 1st month

Dear all,
In my client place, the go live happened on 01.04.2008. The asset transfer date is 31.03.2008. When I run afab, I am unable to calculate depreciation for the 1st month. The 1st month depreciation is getting added to the 2nd month. But i want the 1st month dep to be showed seperatly. Please suggest me how the issue can be solved.
Thanks & Regards,
A.Anandarajan.

Hi can you have a look in the folowing tables with SE16 and there you can see the values posted for the depreciation:
tabel TABA, I think no values in
tabel T083D, I think that there in is a values (I hoop not) what is this value?
When you set AM and transport it and have already run a depreciation run it is possible that this value is transported.
When it is only period 01 then pehaps you can take the decission to do an unplanned depreciation run in period 02 (values fromperiod 01 and 02). In all cases you can do this as a test run
Paul

Depreciation for additional vaule

Hi All
While we are running depreciation in AFAB , for the asset additional vaule. In this connection System is not calculating dep on capitailzed date for the additional value. This issue details are:
1.Old asset value is 4,97,000, Capitailzed date is 14.02.2000,legacy asset upload to SAP system on 01.06.2008.
2. For this asset we can add additional value of 100000 rs on 31.12.2008.
3. We follow the 10% WDV method.
We are trying to calculate depreciation for additional value and old asset value, but system is not considering the capitalization date for additional value.System is calculating dep one day for additional value.
User wants to calculate depreciation for 365 days for additional value.(100000)
Anbody can access me to solve this issue.
Regards
G.K.Dharmendar

Hi
You just check either you have set the asset data transfer dates properly and it is ok then check while creating legacy data through AS91 you have given the take over values in all dep areas, these 2 reasons may be causing just check and confirm.
Regards
T N R

Depreciation for Days

Hi All,
In asset accounting if we wants to calculate depreciation for Years & Months we can calculate by getting option in depreciation area tab of asset master record. for e.g If situation is 7 yers & 6 months then yera column we give 7 & period column we give 6.
But if i want to calculate depreciation like 7 years, 6 months & 15 days how to achieve this.
Looking forward for response.
Reagrds
Sandeep

Hi Sandeep,
I dont think there can be any decent work around for this...
However, you can try to change your dep key to use a Dep % instead of useful life.... You can adjust your dep % rate so that the asset depreciates over Yrs - Months & 15 days.... However, i think its gonna be very difficult to do that
br, Ajay M

Stop depreciation for few months

Hi,
I want to stop depreciation for few months.
For those months system should not calculate the depreciation.
for example, i dont want to calculate depreciation for assests for the sep, oct months, after that system should calculate depreciation.
how to proceed this.

HI,
The system will calculate the depreciation based on the useful life defined. But depreciation won't be calculated for the shutdown period as defined in the Asset Master.
For example if you define 12 periods (1 to 12) of useful life for an asset, and assume that shut down period is 3 and 4, then the depreciation won't be calculated for period 3 and 4 but the useful life of the asset will be extended to the period 13 and 14. (i.e period 1 and 2 of next year). and the depreciation will be calculated for period 1 and 2 of next year.
Thanks
Prasada

How can i calcilate cost depreciation for assets

Hi.
can anybody tell me how can i calculate
cost depreciation for an asset.
i have used one function module DEPR_RECALCULATE.
but it will allow only one date and it will calculate depreciation for total year .
i want to pass the two date .
how can i calculate depreciation between two periods.

Hi,
Check this FM: AM_ASSET_DEPR_CALCULATE
Regards
Kannaiah

Customizing setting 'Recalculate depreciation for previous years'

Dear Experts,
I have requirement where for tax depreciation areas we want the system to recalculate the depreciation for previous years. For e.g.
Asset acquired on 7/1/06 with value 10000
Useful life: 5 years
Take over date in asset accounting: 9/30/2008
With the above example, I want the system to show me depreciaiton values for the years 2006 and 2007 also in transaction AW01N (Asset Explorer), apart from 2008.
In FI-AA customizing, I have enabled the relevant depreciation areas for recalculation in the node 'Recalculate Depreciation for Previous Years' (Transaction OAYF).
However, when I create the legacy asset and maintain the takeover values, the system just shows me depreciation for 2008 and onwards.
Is there something I am missing? Please advice. I have searched the SAP help and SAP notes, but did not find anything.
Regards,
Vishal.

This is not possible. When you takeover an asset using AS91, it is creating an ANLC entry for that year only. 2008 in your case. Regardless of when the asset was originally acquired, SAP will only let you report on it back to 2008.
This concept is no different than any other FI/CO legacy conversion. If the customer is going live on Jan 1st 2008 but they want to do monthly comparison reporting in SAP (Jan 07 and Jan 08), then they need to convert 2007 data. If they want 2006, they need to load that too. Etc.
For FI-AA, if the customer wants to view data back to 2006 you would have to change the takeover date to that year and adjust the data as well (accumulated depreciation).
-nathan

Depreciation for full month

Hi Friends.
My client requirement is to provide the depreciation for the full month in the year of acquisitiona as well as sale. For example, if an asset is acquired on 10th of a month, the system should calculate depreciation for the full month though the asset is not held during the first 10 days. Similarly at the time of sale also.
Your answers carry more weightage with good appreciation.
Regards.
Srini

Hi,
For this you have to set up:
2 new period controle rule's TC OAVS
Define Calender Assignments TC OAVH
Maintain Period Control Methods TC AFAMP
You have to assign this to your depreciation key TC AFAMA (perhaps a new depreciation key)
It the depreciation key the the follow options should not be selected:
Dep. to the day

Full depreciation for low value assets

Hi Gurus,
How to set up depreciation key of low value assets to get asset fully depreciated irrespective of depreciation start date.
For example :
Asset No : xxxxxxx xx
APC : 5000 INR
Dep. Key : xxx (100% Depreciation)
O.Dep.Start Date : 14/05/2006
In the above case depreciation was calculated only for 322 days
But I need to calculate depreciation for 365 days ie 100%.
Please advice.
Best regards
Raja Manhoharan V.S.

There is a standard depreciation key with description LVA 100%. i am not sure if dep key is GWG or something else.

Running depreciation for assets uploaded by ADI

Hi All,
I uploaded some assets into applications using ADI (Application Desktop Integrator). I did not enter any YTD or Accumulated Depreciation values while doing that with the hope that the applications will calculate it when I first run the depreciation for the current open period.
For some of the assets, Date in Service field has a date from 2-3 years ago. Does anybody know if applications calculate depreciation for those old assets when running it for say January 2007 or I have to manually calculate and enter it into the system.
Thanks,

Hi Bernhard
The understanding of getting -1100 as NBV is correct
But when we check the AR001/AR002 as an enhancement spot, our requirement cannot be done
We tried the other option of taking an customer exit during AFAB and tried to append the value of depreciation. At that point we cannot append the current period depreication from postive to negative
From our analysis we found that it may not be the right place, since we have the value of depreciation in postive in AA table (which can be checked in AW01N)
The other option of this is while posting transaction for example F-90, the system will post FI transaction and it will update the AA tables as well
But AA updation happens at backgroud. Do you have any idea or hint which program will update the AA when F-90 is done
If you check the value in AW01N, this will be calculated the planned depreciation movement the F-90 transaction is posted
Thanks
Bala

Calculate Depreciation Forecast for Fixed asset

Dear all expert,
I'm new to ASO, would like to know if there's a way to do depreciation forcast for fixed asset in Essbase.
1. Database type is ASO
2. Assuming user will prepare forecast caplitialization of fixed asset then upload to Essbase
3. Attribute dimension "Useful life" has been defined and attached to specific "Accounts" dimension for calcluation
4. Need to calculate the forecast and spread of depreciation for future months
E.g. Input 32000 USD for a fixed asset cost with 32 months useful life
-> should calculate 1000 each month for the coming 32 months
Can any expert suggest how to do this in ASO? meaning only can do calculation in member formula itself, not calculation script.
Thanks for your help in advance,
Billy

I haven't used the feature, but the reference to 'local script_file' in the MaxL railroad diagram for the 'execute calculation' command suggests the location is relative to the client, if the semantics are consistent with the 'export data' command (the options for report scripts there are 'server' or 'local', although according to the railroad diagram there is no non-local alternative in this case!).
There is a worked example in a Rittman Mead blog post about this that might help: http://www.rittmanmead.com/2010/04/oracle-epm-11-1-2-essbase-calculations-on-aso-cubes-part-2-maxl-scripts-and-eas/
The DBAG also says that the script files should have suffix .csc, while the Tech Ref example has suffix .txt - helpful!! If they were actually meant to sit in the server's db directory, I would be surprised to find the .csc suffix used, since that is also the suffix for aggregation scripts. Although me being surprised doesn't mean much.

How do we calculate Accumulated Depreciation for a Particular Period

Dear Members,
How do we calculate the Accumulated Depreciation for a particular asset. It would be great if some body can explain me ,what tables should we use.
I read that Accumulated Depreciation is nothing but deprn_reserve column in fa_deprn_summary table. I have to make a report which should show the accumulated depreciation for an asset by period name. (eg : For MAY-07 the report should give the accumulated depreciation for that asset).
Please give your suggestions.
Thanks
sandeep

Hi,
You can use DEPRN_RESERVE from fa_deprn_summary to get accumulated deprn. Make sure you select the latest row from fa_deprn_summary for a particular period.
Use FA_DEPRN_PERIODS to join with period_counter if you wnat to use Period Name as criteria.
Cheers
Sunil Chawla

How to calculate the depreciation for an asset under repair for a month

Hi,
I have placed an asset (Laptop) into service 01.01.2013 and I have calculated the depreciation for the 1st period and in the second period 01.02.2013 the laptop is broken and which was sent to the service center and for that entire month no depreciation is calculated. I wanted to start the depreciation for the same asset on 01.03.2013.
how to process for the depreciation for 3rd period and for the 2nd month what should be the activity of the asset?
Please explain in detail.
Thanks,
Santhosh.

Hi,
If you do not want to post depreciation for an asset, then assign depreciation key 0000 for the asset.
OR
Use the asset shutdown option in field status group in time dependent tab.
Regards
Srinivas

Unable to calculate depreciation for 2008

Similar Messages

Maybe you are looking for