Unable to connect to FDM workbench and workspace Authentication failure 2007
Hi
I am not able to login to FDM workbench and workspace through Admin user . when i tried to login i am getting Authentication Failure 2007 message.
i had created .udl file and checked whether its connecting to SQL DB its working fine i am getting successful message .
i had checked whether the user is in tsecusers in database tables . i am able to see Admin user in tsecuser in database tables
Hi tried deprovisioned the Admin user and reprovisioned the user but no luck
but when i created new user and given permission to Application has a Administrator . its working fine with new user .
How can i connect with Admin user .
Thanks
Hi Thanos
Thanks for you reply
i had raised a SR in my oracle support waiting for reply . Its upgrade application from 11.1.1.3 to 11.1.2.2 . i am not able to connect from Admin user also .
In SQL DB UniqueID is NULL
after removing admin from tsecuser user i am able to add also in tsecuser.
Thanks
Similar Messages
-
Unable to connect to wi-fi and bluetooth
I am unable to connect to wi-fi and bluetooth from my iphone 4S. I have already tried doing a hard reset, resetting all of my settings, removing/replacing my sim card, and updates. What else can I try? I have also brought it to an AT&T store, but they were unable to help.
Maybe Its a bug or a crash try turning off pressing home and sleep button for 10 secs
-
when I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password; thoughts?
Does the iPod connect to other networks?
Does the iPod see the network?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Unable to connect to Oracle Discover Application: ORB Initialization failure
We are running Discoverer 4.1.37 in a DMZ. Some of our internal users receive a "Unable to connect to Oracle Discoverer Application: ORB Initialization failure ..." error when trying to use Discoverer Plus. Our external users are able to connect using Discoverer Plus. We have SSL and Gatekeeper was configured with the machine's IP address (Exterior address), port 443 (exterior port), and exterior proxy address. Networking changes were made to enable users to use one web address instead of two (one for external and one for internal). Also, if I trying to use the machine's IP address in the web address, Discoverer just says "Loading" in the Discoverer Plus status box. If I use the one web address (originally, the external web address), I can log into Discoverer.
How are you trying to connect the database using JPA?
Has your datasource got bind successfully. You should check all these things first. If your datasource has not got binded then debug for that. -
What's the difference between, just for example, "login block-for 100 attempts 15 within 100" and "security authentication failure rate 3"?
Please ignore the numbers, I need to know what the differences are in commands and what they do, what they affect.security authentication failure rate number_of_failed_attempts : A global configuration mode command used to specify the maximum number of failed attempts (in the range of 2 to 1024) before introducing a 15-second delay
login block-for 100 attempts 15 within 100 : Block all access after 15 failed login attempts within 100 Secs for the period of 100Secounds (1.40 Minutes).
The Cisco IOS Login Enhancements (Login Block) feature allows users to enhance the security of a router by configuring options to automatically block further login attempts when a possible denial-of-service (DoS) attack is detected.
The login block and login delay options introduced by this feature can be configured for Telnet or SSH virtual connections. By enabling this feature, you can slow down "dictionary attacks" by enforcing a "quiet period" if multiple failed connection attempts are detected, thereby protecting the routing device from a type of denial-of-service attack. -
as stated in the title, i when i try to sync my new ipod touch to my computer it says its unable to connect due to unkown reasons. the music is listed on my touch as there, but faded (minus a selected few songs) and therefore are unplayable. i have no idea where to start, i figured downloading the newest itunes update, however, it no longer shows up when i start it up. confused.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another cable and USB port
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Unable to Connect to the Server and WLI Domain problem
Hi All
this is the details
I have installed installed WIntegration Server and using
quickstart click the Take to Platform tour I started all the servers
Note-- I have not installed separate weblogic server 7.0 and not started.
whenever I click started WebLogic Integration Studio and it shows
user --admin
password- security
url--t3://localhost:7001
once submit it shows always Unable to connect to the server
please help me ???????????????????????????????????????????/
Server is running fine I used quickstart--- Take the live platform tour to run
the below servers.
C:\bea\weblogic700\samples\platform\e2eDomain>"C:\bea\jdk131_08\bin\java" -hotsp
ot -Xms256m -Xmx256m -XX:MaxPermSize=256m -Xverify:none -Dcommerce.properties="
C:\bea\weblogic700\portal\weblogiccommerce.properties" -Dweblogic.jws.Production
Mode="false" -Dweblogic.servlet.ClasspathServlet.disableStrictCheck="true" -De2e
Sample.b2b.path.data=".\beaApps\e2eApp\data" -Dweblogic.Name=e2eServer -Dbea.hom
e="C:\bea" -Dweblogic.management.username= -Dweblogic.management.password= -Dweb
logic.ProductionModeEnabled=true -Dweblogic.management.discover=false -Djava.sec
urity.policy=="C:\bea\weblogic700\server\lib\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Aug 5, 2003 1:22:23 PM EDT> <Notice> <Management> <140005> <Loading configurati
on C:\bea\weblogic700\samples\platform\e2eDomain\.\config.xml>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090093> <No configuration data
was found on server e2eServer for realm CompatibilityRealm.>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Aug 5, 2003 1:22:38 PM EDT> <Notice> <WebLogicServer> <000327> <Starting WebLog
ic Admin Server "e2eServer" for domain "e2eDomain">
<Aug 5, 2003 1:24:23 PM EDT> <Notice> <B2BIntegration> <000000> <INFO: WebLogic
Integration - B2Bi Server started successfully.>
INFO: WebLogic Integration - B2Bi Server started successfully.
<Aug 5, 2003 1:24:31 PM EDT> <Notice> <AI> <000000> <Started WebLogic Integratio
n - AI Server version 7.0.4.0>
<Aug 5, 2003 1:24:35 PM EDT> <Notice> <BPM> <000000> <Started WebLogic Integrati
on - BPM Server version 7.0.4.0>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Index running on this server. If your browser
fails to launch, point your browser to the URL
"http://Inforicadb:7501/index.jsp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
=============== Initializing Logger ======================
<Aug 5, 2003 1:24:36 PM EDT> <Notice> <Management> <141053> <Application Poller
not started for production server.>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "SSLList
enThread.Default" listening on port 7502>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "ListenT
hread.Default" listening on port 7501>
<Aug 5, 2003 1:24:47 PM EDT> <Notice> <WebLogicServer> <000329> <Started WebLogi
c Admin Server "e2eServer" for domain "e2eDomain" running in Production Mode>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000365> <Server state
ch
anged to RUNNING>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
please help me, urgent
Thanks in advance
Domain problem---------------------------------------------
I created WLI domain like this is it correct ?
Next I used Quick start's --Configure New Server
then single server option radio selected
then
single server name--myserver
server listner address---????????? please tell me
server listening port 7001
ssl listnening port 7002
username bala
password subramaniam
verify password subramaniam
c:\bea\user_projects\CIBC
configure database mail--
email address- [email protected]
email host: what need to give ??????? please tell me----
after I created domain called CBC it is in the
c:\bea\user_projects\CBC
then I saw it consists
1)wlai folder
2)dbinfo
3)application
4)keys
5)scripts
setdatabase.cmd
startweblogic.cmd
startmanagedweblogic.cmd
setwlidomaindata.cmd
wliconfig.cmd
checkdomain.cmd
Wliconfig.jar
startweblogic.cmd
stopweblogic.cmd
I try to startweblogic.cmd it open and closed no action
please tell me what is the problem????????????
with regards
balaOh boy! Let me see what's going on. Are you using the VZW Cloud or the BUA app? Please try downloading the VZW Cloud app if you dont already have it. And once downloaded. Tap the 3 bars in the upper corner and go down to "TOOLS", then tap "RESTORE CONTENT". That should do it!
VanetrisC_VZW
Follow us on Twitter @VZWSupport -
Unable to connect to app store and iTunes store
so i was just casually browsinh the app store and downloading free apps when the app store suddenly stopped working
it could not search but it shows the top rated apps
and after a few minutes a message pops up saying "unable to connect to app store"
i tried to use iTunes and it also did not work and showed a similar message "unable to connect to iTunes store"
p.s. i will not updateEverthing works now after 20 minutes
iTunes store was probably down even though it indicates green for up -
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Hi All,
Just wondering if anyone has experienced the installation of the FDM Workbench in Citrix. We're considering using this approach to give our admins access to the tool.
Thoughts and views welcome.
MarkI've seen it used but per the app read me, the use of Citrix for FDM is not supported. So moral of the story, it may work but if you encounter problems, support may not be available.
-
Problem loading page. Unable to connect. Suggests a firewall might not let Firefox access internet.
See [http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox Cannot connect after upgrading Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Unable to connect to netgear router and internet
I've installed Solaris 10 1/06 (x86) on a system running an intel mainboard model D865PERL. This has a built in ethernet controller ( Intel 82547EI gigabit lan controller) and the mainboard appears on the bigadmin hcl as being supported. The OS recognizes the built-in NIC as e1000g0 but during initial installation it attempts to configure e1000g0 first thing then responds with "skipped interface e1000g0" then proceeds with the installation.
I choose Networked and run through the installation (or following a sys-unconfig) selecting to enable DHCP but it returns "Could not contact a dhcp server on the network interface e1000g0." I then have to set it up staticly to resume the configurator. I specify the e1000g0's ip address as 192.168.0.5 with a subnet mask of 255.255.255.0. I choose not to enable IPv6 (ive tried it with IPv6 enabled) and no Kerberos. I attempt to specify DNS for name service and use my internet providers domain name (both the name and the resolved ip address associated with it) with the two DNS server ip addresses resolved by the WAN setup on the router (Netgear FR328S), selecting no search domains. But it is unable to locate my hostname on the provided DNS's i entered. dunno why it would say that, it really doesn't matter does it? Anyway, I specify no name service to proceed. i choose no to the question in regards to overriding the system's default NFS version 4 domain name to continue.
It knows it has a cable connection but I'm unable to see the router, even though ive specified 192.168.0.1 as the default route (ive also tried setting it to detect the default route on reboot but it fails). The router doesn't see the NIC as a connected device either (im setting here on another computer running xp :() Ive tried disabling the DHCP server feature on the router and I still cant see it. Ive tried setting the NIC's ip address and MAC address as reserved in the LAN setup on the router (this works for my winXP drive where I need a static IP address and also have access to the internet). I've tried leaving the reserved IP address assignment (attached to the NIC's mac address and host name that i specified) with DHCP enabled but I'm still unable to resolve an IP address from the dhcp server. I made sure the router had the latest firmware and went through the configuration with a fine toothed comb, so to speak. nothing seems to work.
I tried to connect directly to the internet device, removing the router and it still fails to resolve an ip address via dhcp. what am i missing here? Ive run through this multiple times now and im at a loss. Ive also referenced sun's System Administration Guide: IP Service to try to resolve the issue but im now all I'm doing is going in circles.
# ifconfig -a
lo0: flags=2001000849<UP, LOOPBACK, RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.0.5 netmask ffffff00 broadcast 192.168.0.255
ether 00:13:20:47:6c:48
# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interfacd
192.168.0.0 192.168.0.5 U 1 0 e1000g0
224.0.0.0 192.168.0.5 U 1 0 e1000g0
default 192.168.0.1 UG 1 0
127.0.0.1 127.0.0.1 UH 4 85 lo0
# prtconf -pv
Node 0x000019
compatible: 'pci8086,1019.8086.301f.0'.....etc
model: 'Ethernet controller'
subsystem-vendor-id: 00008086
subsystem-id: 0000301f
vendor-id: 00008086
device-id: 00001019
name: 'pci8086,301f'Couple of suggestions:
Work first on seeing the router, using a static IP and pings.
Forget about DNS, DHCP, etc for now. If you don't see the router, nothing is going to work.
You don't need to reboot or do sys-unconfig every time. Just change your settings using ifconfig and route add. Actually, you don't even need to set the route to be able to ping something inside your subnet.
By your output of ifconfig, it seems that the NIC plumbed correctly.
In the Solaris machine, try pinging your own IP address to make sure it responds and you don't have any issues with the NIC/driver.
Make sure the cable and port in your router work. If you can use them with Windows, you should be able to use them with Solaris. Unless...
Try using a crossover network cable to connect the Solaris computer to the router. This is personal experience: I had a Blade 100 that would not see my router. After a couple of hours of trying just about everything, I used a crossover cable and voila! it worked. Why? I don't know :) , but it worked... -
Unable to connect to the internet and more
First I have a Linksys WRT5G Wireless Router
I also have a Aol Broadband DSL Connection(They use verizon lines)
I recently had to reinstall a fresh copy of windows and this is where my problems began.
I am now no longer able to simply turn on my computer, open internet explorer and browse the internet. I now need to open up AOL and sign in, before being able to browse the internet. This was not the case prior to reinstalling windows.
My second problem is the only way I can connect is if I plug in directly to my modem, and not my router. If I plug into the router, and try to sign into AOL I get either that no DSL line was detected or no Internet Connection was detected.
I have a Dell Inspiron laptop, and the wireless adapter that comes with it is not compatible with encryption on linksys routuers, so it has always been wired to the router while the other computers on the network are wireless.
I've tried live tech support with both AOL and Linksys to no avail. Does anyone happen to know what the problem is?BAcevedo20!
If you have not resetted the router then go to network connections of the omputer that has the AOL software on it. Right click on the AOL software & click cancel as default. That will make the PPPoE settings on the router to try to connect to your PPPoE sever [modem/ISP].
Regarding your Dell laptop, it is compatible. You just have to know how to configure the Dell utility.. -
Unable to connect router to internet and computer at the same time.
I'm not sure where to start, but here goes. We recently got the internet set up at out new house. Of course, the only connection is downstairs and the computer is upstairs. The guys that set the internet up said we needed a wireless router and I said "Ok, cool."
He gave us a router and a receiver and hooked them both up. (I myself know quite a bit about computers but I figured I'd let him do his job.) So we're all set up and I start playing my game and I get a "Windows has a conflict with another computer on this IP" or something like that. I figured I might as well put some security up on this thing. So I go downstairs and hit the SecureEasySetup (SES from now on) button and come back up here and follow all of the steps and it say's that it's not connected. I run back downstairs and looc for the MAC Address and notice that it was not mentioned as one of the selectable routers.
I figured the guy didn't really install the router, just hooked the internet up into it and plugged it in, and that my reciever picked up someone else's from the neighborhood. So I go and get the CD to install and notice that I have to have the router plugged into the computer AND the internet at the same time for installation to complete. Uhh, that could be a problem. Computer upstairs + router and internet cable downstairs = no go.
So here's my question: What can I do about that? I can't have the computer and the internet hooked up to the router at the same time.
Thanks to everyone that replies.First off... don't use the setup CD.
Configure your router by http(ing) to the IP address, log in, and configure that way. much easier. typically its http://192.168.1.1
username admin
password admin
once you get logged in change that password and Remember it! If you lose it, you'll have to reset to factory defaults.
2nd
Change your SSID. Default is "linksys" you'd be suprised how many people leave the thing as defaults and someone else is using yoru network connection...
3rd
Add security WPA is better than WEP
4th
Now go upstairs and look for your new SSID, connect with your WPA code and you should be set.
5th - Not needed but for info...
If you want to go that far... you can change your DHCP set to something like 10.0.10.x but you'll have to manually change the IP of the router to that subnet as well... -
I'm unable to connect to any network and not sure why
My iPad and other devices connect just fine but all of a sudden my MacBook pro just stopped and I've played with the network settings many times.
Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/16
Maybe you are looking for
-
Breadcrumb doesn't retain the previous page values
I have the following hierarchy in my pages. home > search > summary > details. The user goes to the search page gives a criteria and the summary page shows all the required matching results. Now the summary results is a table of name, id, date etc. T
-
I have 4 devices all varying ages and versions how do I get them all to one account?
I have 2 old iPods with a shared itunes account but different email accounts synced to a computer we no longer have. I have an old iPad (4.xxx I don't know what version) that when first synced to the old computer crashed it and the reason we no longe
-
How do i get it to my website once i have finished
how do i get it to my websites after i have finished
-
Getting cfgrid (flash) to submit a row
Hi all, I'm at about my wits end on this...I can submit a row from a query set in cfgrid if I set it to format=html and it works just fine. However, with that format, I cannot sort columns which is necessary. So, I set format=flash and the formatti
-
Free upgrade from CS5.5 to CS6 (Design Premium)
Is Adobe offering an upgrade and if so, where can I find the link?