Unable to get .PS File

Dear all,
We are able get the popup for saving '.PS' File while sending the print. That time our ptinter is of type 'F'.
We have changed printer type to 'G' & may be some has also changed some more settings. Now, I am unable to get that popup & so not able to save file.
Can anyone help in advicing how to solve this problem?
Thanks in advance.
Kind Regards,
Prasad

Hi.. I am looking to upload the .ps file and convert to pdf as well..
Did U ble to upload it in SAP.. ?
Cheers

Similar Messages

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Unable to get source file content as mail body in file to mail scenario

Hi Friends,
I am facing one problem with one of my file to mail scenario in PI(SP9). I have done bypass scenario(without IR only with ID objects). Scenario is working fine, i am getting mail also. But my requirement is i want complete source file content as a mail body (not xml format, text format). I have checked all options, but configured scenario bydefault taking source content as a attachment and mail body is empty. I have tested below options
1. If i choose message protocol as FCC mechanism at source side content at target side i am getting xml format as a attachment( In mail adapter i have selected message protocol as xi payload, and without packate option on mail adapter). If i choose message protocol as xi all, i am getting 2 files as a attachment (one file as a payload content and second file as a source file content in xml format).
2. If i choose message protocol as file at souce side that time i am getting source complete content as a attachment at target side in xml format, but mail attached file content is flat file(.xml extension) format. When i tried to open attachment file that time i am getting error in explorer, but i can see only one row in explorer remaining rows unable to see.
Please share your ideas on this.

Hi,
Follow below steps
1. First basis level need to configure setup(SMTP) for mail. After that only mail will go from SAP.
2. Source side depending on requirement take communication channel(idoc, file etc)
3. Receiver side communication channel take mail adapter and configure below setup
   3.1 select message protocol XI ALL/ XI PAYLOAD(WITH PACKAGE or WITHOUT PACKAGE)
   3.2 if message protocol is XI ALL, the complete content will be sent as a attachment along with payload file
   3.3 if message protocol is XI PAYLOAD, the source message, the source message will be sent as attachment. Playload file filter automatically.
   3.4 If you use PACKAGE option on mail adaper, this time source strucute need to import from SAP (some standard structure only will be support, without strucutre we can't work). If you choose package option no need to give mail id on communication channel, we need to pass mail id's from source structure.
I hope now clear.

Reciver File channel unable to get message from Xi in file- file scenario

Hi All,
I have done a small File to File scenario.
Sender file adapter receiver the file and gives it to XI, then deletes the file from that directory.
Receiver is unable to get the file.
I have a message mapping defined for the receiver which concatenates two fields from one message type and transforms it to another.
I have configured the scenario.
When I check the adapter stats Sender channel picks the Xml deletes it from the directory.
Sender channel:
Sender Adapter v1014 for Party '', Service 'SourceFileBS':
Configured at 04:25:50 2006-06-03
Up and running: Last message processing started 05:10:50 2006-06-03
last poll interval started 05:10:50 2006-06-03
length 60,000 secs
Receiver channel:
Receiver Adapter v1027 for Party '', Service 'TargetFileBs':
Configured at 04:25:50 2006-06-03
Up and running - no message processing until now
I configured the scenario (receiver agreement, determination, sender agreement, and interface determination).
Instead of Business systems, I Configured Business services (Virtual) for inter company communication.
XI is unable to give the message to the receiver channel.
Please help me to debug the scenario.
Regards,
Meher

Hi All,
Thanks for all your Responses.
I see a high payload in my monitor belonging to some other process ( shipped with XI) MAT_LEGACY.
The scenario which I executed is showing up a status of scheduled
Adapter has picked the message at 01:59:37 2006-09-12
and start time and the end time of the message is shown as
01:59:37 2006-09-13 in the XI monitor with a status of scheduled .
can I purge the sceduled messages for MAT_LEGACY scenario?
if yes how do i do that?
is this causing a problem for the file not being received by receiver?
when i go to the transaction manager with SMQ1 with the client 100 i see the queue on which the above message is persisted with a queue status of ready.
help me.
Regards,
Meher

I am unable to get same preview image colors in Bridge and Lightroom

I am unable to get same file preview in Bridge and Lightroom. The Lightroom preview image (in both the Library and Develop) is more de-saturated. But the exported/saved jpegs match. If I try to match the Lightroom preview image to the Bridge preview image, the resulting Lightroom export colors are off. I have tried this with images with no changes and with changes and the result is the same. I have Lightroom 5.6 and CR 8.6. I am using the latest version of Bridge.
I contacted Adobe support and followed all instructions to try to fix but the problem remains. This comment was made after several solutions were tried, including updating Lightroom. :
Adobe: there would be little difference in case of preview of Bridge CC and Lightroom 5. However, after exporting it would be same. Both use different technology at the background and work in a different way. The preview which you see in lightroom is not the actual image but incase of Bridge you see the actual image ( original ). That's the reason there is a color variation between previews.
Me: But how can I then use the Lightroom preview to get accurate colors when processing a RAW file? If I do adjustments to the RAW file in Lightroom it looks different when exported. That doesn't seem to make sense when Lightroom is designed for photograhy
Adobe: Please check in develop module of lightroom.
Me: Nothing changes in the develop mode. The image looks the same as in the preview/Library mode.
This screenshot shows the unmodified images in Develop (Lightroom) and ACR (Bridge). The color differences are significant.
Lightroom exported jpeg file, unmodified from preview image in Develop (which looks like Bridge preview image not the Lightroom preview)
Bridge saved jpeg file, unmodified from preview image in ACR
Any suggestions on what I need to do to Lightroom to make it show accurate colors. If not, I don't see any point in using it to process files.
Thanks, Marie

Bridge is just a browser. It displays according to the embedded color profile but assumes sRGB for all untagged images.
In Lightroom library previews use Adobe RGB and in Develop the working space is Pro Photo RGB.
The real question is why use both Bridge and Lightroom. Stick to one, not both.

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please help

Wait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

Error code -43 - unable to get file path when burning DVD

I just installed Tiger on my son's iMac 500. Borrowed a Lacie DVD r/w and tried to burn the contents of a user folder to a DVD-R. It burned part of it, but failed with the following error:
The operation can not be completed because one or more
required items an not be found. (Error coed -43).
Could not open the dat fork of "<unable to get file path>" (-43).
I was able to burn a CD on the drive, but that was for another user directory that fit on a CD-R. The folder I was trying to burn to the DVD was about 1.1 G.
Thanks,
Alfredo

I just installed Tiger on my son's iMac 500. Borrowed a Lacie DVD r/w and tried to burn the contents of a user folder to a DVD-R. It burned part of it, but failed with the following error:
The operation can not be completed because one or more
required items an not be found. (Error coed -43).
Could not open the dat fork of "<unable to get file path>" (-43).
I was able to burn a CD on the drive, but that was for another user directory that fit on a CD-R. The folder I was trying to burn to the DVD was about 1.1 G.
Thanks,
Alfredo

Nokia PC Suite - File Manager - Unable to get Blue...

Running Nokia PC Suite 7.1.180.46 on Windows 7 Home Basic. Able to perform export of contacts and messages from my nokia 7230 using CA-101 cable.
But when invoke File Manager, getting the message "Unable to get Bluetooth FTP Remote Folder Content. Please check that your device is turned on and working properly.".
Under Settings --> Manage Connection, only USB cable is ticked.
Can someone help me? Thanks.

Am worried recharging my phone cause if do after few minutes the air time disappears thats if i do not make call immediately. Yea my browsers are on. Pls help me

Getting pop up 'Unable to open resource files'

Hi all,
I am having one PXI system which consistes of following hardware.
1. 1042 Chasis
2. PXI8106 controller
3. 7831R FPGA
4. 6509
5. 6221
Out of nowhere, I am now getting a dialog box mentioning 'Unable to open resource files' after trying to open the executable file.
Can any one please guide me on this front.

hi there
when i rename or remove the directory ..\National Instruments\LabVIEW 7.1\resource i got the same error message as you. check this directory. i attached a list of contents of my LV 7.1 resource directory. the contents of your own directory may differ.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
Resource_LV71.txt ‏5 KB

Unable to print PDF files since update. Get "prop res DLL not loaded" message

Unable to print PDF files since update. Get "prop res DLL not loaded" message

This problem has been reported to occur with certain Lexmark and Dell printers. These printers include the following:
Lexmark Z700-P700
Lexmark X1180
Lexmark X1170
Lexmark X1150
Lexmark P706
Lexmark Z25
Dell A940 (Personal All-in-One)
Microsoft has several possible solutions here
http://support.microsoft.com/kb/918730

Getting "Unable to write cache file" message in DW CS4

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws. If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
-Steve

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws. If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
First of all, only delete cache files when DW is shutdown.
Also, there are a few different caches. That article only addresses 1 of them. Take a look at this TechNote to be able to find the Site .dws cache files:
http://kb2.adobe.com/cps/598/5989f7f4.html
HTH,
Randy

My recipient is getting response that the file I sent is not available or they are unable to open any files that I send.

My recipient is getting response that the file I sent is not available or they are unable to open any files that I send. I did not have this problem in the previous version of Adobe Send.

Thanks for replying.
If he's reading the email in Outlook, that shouldn't break up the links.
Do you know: is your recipient clicking on the View File button or the URL link?
Lastly, if the file you're sending is not confidential, would you mind sharing it with me so that I can try to reproduce your recipient's issue? I will send you my email address privately.

Keep getting archive errors. "ERROR: E_FILE unable to find md file: /Volume....

We have a Final Cut Server setup where after two weeks assets will automatically be archived to tape. Every so often I am getting error messages that state something similar to the following:
Job 404117 Archiving 214452_upload.mov needs attention. Please login and troubleshoot.
The error that occurred was:
"ERROR: E_FILE Unable to find md file: /Volumes/xsan/MEDIA/devices/video.bundle/3dd/00000000000203dd_md No such file or directory"
Naturally I will look at the directory path and will not see the file. When I search for that particular asset it will show up as online, but the "original media" is grayed out. Then there will be an exclamation point over the file cabinet (which says the file is online). So the media is missing. When I look at the log of the file, there will also be an email that was sent out to the creator saying that the file was ready for editing.
Any thoughts are greatly appreciated.
Eddie

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Unable to get .PS File

Similar Messages

Maybe you are looking for