Unable to map master page gallery as network drive for migrated sitecollection

Hi all,
I am unable to map the masterpage gallery as network drive for design manager for a migrated site.
This is a windows 2008 server r2 OS. Desktop experience in installed.
I am able to map the master page gallery as network drive for two other site collections which is not migrated.
But for the current migrated sitecollection, it throws the familiar error that it is unable to connect.... I already tried unistalling and reinstalling desktop experience.
Kindly help.

Hi sanjuv,
According to your description, my understanding is that you can't map master page gallery in network drive for certain migrated site collection.
If you can open the master gallery with explorer, it means the master page gallery really exists. I suggest you check if the path is valid in the network drive. You can find the detailed path information with the articles below:
1.On the site for which you are creating a design, start Design Manager. (For example, on the Settings menu, choose Design Manager.)
2.In the numbered list, select Upload Design Files.
3.The Design Manager: Upload Design Files page contains the location of the Master Page Gallery. The location probably ends in /_catalogs/masterpage/. This is the location to which you will map a network drive.
4.Make a note of the location of the Master Page Gallery, or copy it to the Clipboard.
Here is a detailed article for your reference:
Map a network drive to the SharePoint 2013 Master Page Gallery
If the issue still exists , I suggest you can check the link below to troubleshooting the connection error with Network drive. You can try to install the kb of IE10 below to test if it works.
https://support.microsoft.com/kb/2616712/en-au?wa=wsignin1.0
https://support.microsoft.com/kb/2846960
Best Regards
Zhengyu Guo
TechNet Community Support

Similar Messages

Unable to map master page gallery to network drive on XP Service Pack 3

I've tried to map the master page gallery to my computer as a network drive. I've tried using the Tools > Map Network Drive method as well as net use x: \server\folder\. Both methods result in failure. I am on Windows XP SP3. I used a colleague's computer
who has Windows 7. Using my username and the same methods, I was able to map the master page gallery to his computer.
Has anyone heard of an issue in not being able to map a master page gallery to a machine running XP? It's obviously not my permissions.

Hi,
According to your post, my understanding is that you could’t map the master page gallery to your computer as a network drive.
You can refer to the following KB article You receive an error message when try to map a network drive from a Windows XP workstation: “Logon failure: unknown user name or bad password”
You also can refer to the following similar posts:
http://social.technet.microsoft.com/Forums/en-US/df1b2a62-1ee7-43d8-83ea-eeae5f626220/windows-xp-service-pack-3-and-mapped-network-drives
http://stackoverflow.com/questions/11178480/mapping-a-network-drive-webdav-doesnt-work-with-windows-xp
If you want to know more about the Windows XP Service Pack 3, you can post your question to the forum for Windows XP Service Pack 3:
http://social.technet.microsoft.com/Forums/en-US/home?forum=itproxpsp
More experts will assist you, then you will get more information relation to Windows XP Service Pack 3.
If you have any problems, please feel free to reply me.
Thanks,
Jason Guo

Master Page Gallery contents renders in old Sharepoint 2007 style after upgrade

I have a site collection that is still rendering the Master Page Gallery items in the Sharepoint 2007 style instead of the Sharepoint 2013 style, and I can't pinpoint where this is coming from. I'm sure it's from a resource that was customized some
time before our Sharepoint 2010 upgrade, preventing the view from upgrading properly at this point. I'm looking for advice on where to look to get to the root of this issue.
Possibly other libraries are affected, but it is most apparent in the Master Page Gallery.
Here's what the items should look like in Sharepoint 2013. In html, the item name column dropdown menus are populated with div elements, and it has a blue background dropdown arrow when hovering over it.
Here's what this site collection renders. In html, the item name column dropdown menus are populated using table elements, and it has a solid border with a different dropdown arrow when hovering over it.
Functionality wise, this is preventing master pages and page layouts from being checked in and checked out and approved from this view. I'm only able to do these changes using the sitemanager page for this site collection right now.
Other information:
- There are other site collections and web applications in this same farm that are not affected, so I don't believe it is a modification made in the hive files
- I've tried making new views of the master page gallery with no success
- I've compared the contents of the AllItems.aspx form in this collection with the AllItems.aspx in a working collection and could not find any difference.
- I suspected that the ListViewWebPart is not current, but I can't find where I can check on this and possibly reset it to site definition. I reviewed all webparts in the _catalogs\wp gallery but can't find a webpart in there that is named ListViewWebPart.
So, the million dollar question is where else should I be checking to get to the bottom of this? Thanks!

Hi Brad ,
For your issue, you can view the Upgrade Status page in Site Settings to verify that upgrade has succeeded for a site collection.
To view upgrade status in Site Settings
1.Verify that the user account that performs this procedure is a site collection administrator.
2.On the Site Settings page for the site collection, in the Site Collection Administration section, click Site collection upgrade.
3.On the Site Collection Upgrade page, click Review Site Collection Upgrade Status.
4.The Upgrade Status page for the site collection is displayed.
For more information, see
Manage site collection upgrades to SharePoint 2013
Also you can go to _layouts/15/reghost.aspx (Site Settings -> Site Actions -> Reset to site definition) and reset the master page gallery to site definition version.
Best Regards,
Eric
Eric Tao
TechNet Community Support

An error occurred during translation of your HTML master page. For more information, please navigate to the master page by clicking the preview button in the Master Page Gallery or directly typing its URL

I apply theme before singing all users into application ,now visitor/member are not affected color text so we are reapplying themes
I am not able to reapplying SPColor /my site Host template " An error occurred during translation of your HTML master page. For more information, please navigate to the master page by clicking the preview button in the Master Page Gallery
or directly typing its URL" while applying theme i am getting error

is it your public site/ community site or team site?
what level of subscription you have?i would say try to delete the site and try to create a new.
http://community.office365.com/en-us/forums/154/t/147705.aspx
are you able to open the site in the sharepoint designer?
or try to send them the private message to the support team.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

"New Document" button on ribbon not working in the "Master Page Gallery" in Internet Explorer 10 & 11

I'm trying to add a "JavaScript Display Template" to my "Master Page Gallery" but when I click on the "New Document" button and select "JavaScript Display Template" it opens the "Add a master page" dialog
and prompts me to upload a file. I've ran into this problem with "Compatibility View" set to both "On" or "Off". I'm able to upload files but I can't get the new forms to show up.
This happens on the root site collection site. For subsites, the "New Document" button is completely grayed out.
FYI - I am a site collection admin and in the "Owners" group for each site.
How can I fix this?

Hi,
According to your post, my understanding is that "New Document" button on ribbon falied to work in the "Master Page Gallery".
In the root site, please make sure you enter all the necessary information when you upload file.
In the other word, you need to make sure the save the “JavaScript Display Template" successfully.
In the subsites, when you click the “Master Page” under Master Page Gallery in the sub site site setting page, the "New Document" button is completely grayed out.
If you want to add the template, you need to active the “SharePoint Server Publishing” feature in the Site sitting->Manage site features.
However, the “Master Page” under Master Page Gallery will become to “Master pages and page layouts”.
If you click the Master pages and page layouts”, you will go to the
Master Page Gallery of the root site, and then you can add Document.
Thank you for your understanding.
Thanks,
Linda Li
Linda Li
TechNet Community Support

Mapping Network Drive for external user does not work

I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
I am able to map this network drive when using [email protected] as user.
However when trying to do this for the user [email protected] I am not able to map the drive.
I am testing this in order to simulate the client to map the network drive.
Logging on the beehiveonline with the user id [email protected] works fine.
Your help will be greatly appreciated.

Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
Try again and let me know how it goes.
Phil

Network Drives for All Users

I am looking to map a few network drives for any user that logs into our iMac. Is there a way to do this? I know how to do it on a per user level. We just need a few drives to be mapped at all times. Thanks.

Autofs: Automatically Mounting Network File Shares in Mac OS X
Using the Mac OS X automounter

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

Using external hard drive on a Time Capsule as a network drive for PCs.

I own a Macbook Air and am using a 2TB Time Capsule router. I am currently using for automatic backups for my Macbook Air.
I also own 2 PC laptops for the rest of the family. Would it be possible to use an external hard drive connected to the USB port of the Time Capsule as a network drive for the PCs? I want to share files between the two PCs.
Thanks

Yes, you can do that.. although it is not necessarily as straight forward as you might think it should be.
1. The TC has to be running SMB compatible names. short, no spaces, pure alphanumeric.
2. The disk must be formatted to file system the TC can read. HFS+ or Fat32.. but the HFS+ is vastly superior.. the actual format is irrelevant from sharing point of view as it is still shared via SMB to the network.
3. It is slow.. half the speed of the same drive plugged into your computer.. although if the connection is over wireless that is probably irrelevant.
4. You might need a powered hub to get the drive to work.. Apple underpower the USB.. and even a powered disk still won't work.
5. There are some issues with the TC getting the USB drive to work.. too many factors to say you will have issues or not.. but be aware this is not as straight forward as it could be. or should be.
6. If you want to share files.. you can always share them directly.. pc to pc or pc to mac.. there is no necessity to do it via a network store.. You can also use the 2TB internal drive.. create a disk image and you can then store you data in that. Internal drive is much more reliable and faster.
See http://pondini.org/TM/TCQ3.html

Powershell script to search a network drive for .mdb files and export them to CSV file

Hello all,
I'm trying to search one of our network drives for old .mdb files, I want to write the name, location and date last modified to a csv file.
Get-WmiObject -Class CIM_DataFile -Filter "Drive='S:' And Extension='mdb'
AND ObjFile.drive
AND objFile.FileName
AND objFile.FileSize
AND objFile.LastWriteTime" |
Export-CSV c:\mdb_search\mdbfiles.csv\
Obviously this isn't working or I wouldn't be posting. I've tried many different examples from the net with no joy for now.
Thanks for any help you can offer.

Thanks, that did the job.
Cheers, you're welcome.
How do I get the powershell cursor to return to C:> ?
Should I use "exit" or "break" ?
Neither, the console will return to a prompt when the search has been completed.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

MOVED: Cant load networking driver for neo 2 plat

This topic has been moved to AMD64 nVidia Based board.
Cant load networking driver for neo 2 plat

1. Put your Windows CD in the drive.
2. Select Install Windows.
3. Let install continue.
4. After the first restart, you will see something about Recovery Console. Do NOT select this option. Just let setup continue.
5. You will soon see a message "searching for existing Windows installation".
6. Soon after, you will be given the option to REPAIR that installation or make a new installation.
7. Select REPAIR.
8. Just keep going.
That's it. Hopefully things will be just fine after the repair is done.

Laserjet 2600n network driver for vista 64bit

Is there any way I can have a network driver for HP Laserjet 2600n for Windows Vista 64bit .

Vista 64 bit drivers for Laserjet 2600n can be downloaded from the following weblinks:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p...
Refer the following two links to configure the printer on Network
Link1:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
Link2:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Unable to convert files to pdf in network drives

Hi Team
Iam using adobe acrobat pro 11 in windows7 64 bit OS.When ever iam trying to convert files from text or word to .pdf iam getting the errro message in devices and printers.
one thing i observed that when i choose local drive eg:c:drive iam there is no problem.but when i given network drives path then its getting error.i have full permissions on network drive and also i can able to save any files,able create files, folders in network drives, So there is no permission issues.
Could you please provide the solution to fix it.
Thanks in advance
Regards
Siva

I don't know the solution, but at one point folks were discussing the issue of the TMP folder used for the PDF creation. It may be that there is something causing a problem with the mix of the TMP folder and the network folder. Be aware, I have no clue what I am talking about, but am repeating things I remember reading at one point. That might help you in your trouble shooting. There are others here that understand networks and will hopefully drop by to help.

HP Photosmart C5580 , I need a network driver for windows 7 64 bit.

hello all ,
this is the only driver supplied by HP for my printer and Windows 7 64bit :
ftp://ftp.hp.com/pub/softlib/software11/COL30128/mp-74904-1/PS_AIO_04_C5500_NonNet_Full_Win_WW_130_1...
as you can see it is listed as "NonNet" and as it is such I am unable to print from ANY other computer in my house , I have been trying o solve this for months , Complete reinstalls of drivers (hundreds of times) and complete reinstalls of Operating systems , this will not work.
(also , the only OS's supported under this drivers listing are the Windows 7 family only , could this be the problem?)
What I have running now:
Main PC , Windows 7 64bit ( the printer is installed here with above and only driver , all software and buttons work and prints as it should)
XP MCE Laptop (sees the printer , installs it , shows it as ready , will NOT print)
Vista Ultimate 32bit ( sees the printer , installs it , shows it as ready , will NOT print)
Vista Home Pro (sees the printer , installs it , shows it as ready , will NOT print)
I am at a total loss other then this driver just is not right , maybe because its not a network driver?? I don't know but I am out of things to try , I have tried adding the port , finding the printer through the ip yada yada on all the PC"s , nothing works
PLEASE if anyone has an answer or direction for me to go , please help.
thanks , have a wonderful day.

I'm not on a wireless netowrk , I have a fully wired network...still no printing (from other computers) if the C5580 is hooked to my Windows 7 64Bit PC
I had to put the C5580 printer and drivers on one of my Vista PC's (in another room) and now all the PCs (even the windows 7 64bit) prints to that pc , the ONLY problem with that is I need that printer/scanner on my Windows 7 64 PC and need the other PCs to print to it , because I need the scanner and software in here.

Where i can download HP Pro 3300 Series MT Network Driver for Windows XP pro SP3?

Please HELP me, i try to find a lot of web page but it not working so far.

meconnen wrote: Thank you so much for the link, but i was trying b4 it dosen't work for me. but just i need LAN driver, but the is no driver for xp. what is going on HP? read my heart...
Hello meconnen, The drivers that were linked to are for the below operating system.
Operating Systems:
Windows Server 2003 *, Windows Server 2008 *, Windows 2000 *, Windows 7 (32-bit)*, Windows 7 (64-bit)*, Windows Vista 32*, Windows Vista 64*, Windows XP *, Windows XP 64-Bit Edition*
Here is a link that has some information on where to locate the drivers for the network device.
Look at the post by julia_weiss, and write the instruction numbers down, and then click on the link to go to the Foxconn download web site, and navigate to the correct location using the information numbers provided.
When the screen opens, click on Locate lan drivers, and then details, and look at the first drivers in the list, and click on the floppy disk icon to download these drivers. They are for Windows XP 32 bit and 64 bit.
This has been confirmed to work, but I cannot verify these will.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Unable to map master page gallery as network drive for migrated sitecollection

Similar Messages

Maybe you are looking for