Unable to open EMC : Initialization failed in Ex2010

Dear Expert
I have the problem in below.
but I follow this technet reference but it does not work, http://blogs.technet.com/b/whats_on_scotts_mind_today/archive/2012/12/07/exchange-2010-unable-to-open-exchange-management-console-initialization-failed.aspx#pi47623=3
please suggest.

Hello,
Please use get-rolegroupmember "organization management" cmdlet to check if you are a member of organization management role group.
Please check if there is related error in application log.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Similar Messages

EMC Initialization failed: WinRM HTTP error 403

We have an existing 2003R2 server running Exchange 2007. I have just installed a new 2012 R2 server with Exchange 2010 SP3 RU8v2. Opening the EMC on this new server yields the following error:
Connecting to remote server XXXXX.DOMAIN.LOCAL failed with the following error message; The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs
and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig".
For more information, see the about_Remote_Troubleshooting help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.3 (Build 123.4)".
If I open EMS it attempts to connect three times, times out, prompts "Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.:" I then type my servername.domainname.local and am prompted with
the following error:
Connecting to remote server failed with the following error message: The WinRM client received an HTTP status code of 403 from the remote WS-Management service. For more information, see the about_Remote_Troubleshooting Help Topic. FullyQualifiedErrorID:
PSSessionOpenFailed
^^^My understand of this error is the connection is being established on 443 instead of 80. I have unchecked SSL from powershell and was able to telnet to the old server (2007 exch box) via 80, so I know the port and traffic is open.
I think this is an issue with IIS on the older 2007 server. Obviously I can't use WinRM Quickconfig on that server (2003 R2) and I noticed that there is no "powershell" module in default site in IIS on this box.
On the server 2007 box if I run 'get-exchangeserver' from powershell it shows both the old and the new server. However the old server is not able to connect to the console at all and I can't verify that it's actively able to manage my exchange forest.
Any assistance is greatly appreciated.

Hi ,
Thank you for your question.
This error could be caused by many reasons, for example: IIS authentication, Win RM and so on.We could refer to the following link to troubleshoot:
1. Make sure we have enough permission to open EMC;
2. We could run “WinRM QuickConfig” to make sure IIS WinRM extension is installed:
3. Open IIS go to Powershell virtual directory and check that SSL in disabled and authentification is set only to Anonymous;
4. If the issue persist, we could use Exchange Management Console Troubleshooter
tool to analysis the error and send error information to
[email protected] for our troubleshooting.
Permissions required: In order to run the troubleshooter, the user will have to have the rights to log on locally to the Exchange server (due to local nature of the troubleshooter at this time) and will need permissions to run Windows
PowerShell.
Installing the troubleshooter: First, we download the troubleshooter ZIP file, which we can find here. Installing the EMTshooter is pretty easy. Just drop the 4 files from the ZIP file into 1 folder, rename them to .ps1 and run
EMTshooter.ps1 from a normal (and local) PowerShell window. I personally just created a shortcut for it on my desktop with the following properties: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit -command ". 'C:\EMTshooter\EMTshooter.ps1'"
However, as most users probably won't run this more than a few times we might not need or want an icon. Just remember that EMTshooter.ps1 is the main script to run.
Resolving WinRM errors and Exchange 2010 Management tools startup failures:
http://blogs.technet.com/b/exchange/archive/2010/12/07/resolving-winrm-errors-and-exchange-2010-management-tools-startup-failures.aspx
5. Check the proxy setting by the following link:
https://technet.microsoft.com/en-us/library/cc731131(WS.10).aspx
6. Make sure two files have been in the following path:
“web.config” file (under Program Files\Microsoft\Exchange Server\V14\ClientAccess\PowerShell)
"applicationHost.config" file (located at: \Windows\System32\inetsrv\config)
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

New user is unable to open EMC on one server

HI all-
      I built a new user and gave them the recipient management role. I also made them an admin on one of the servers, but EMC will not open for them. This server is a dedicated VM for the help desk to build new mailboxes. I,
and other users, can open EMC and function normally on this server.
      When this user RDPs to one of the mailbox servers, he can open EMC with no problem.
      To summarize, this user can work on other servers - but other users can work on this server.
Any thoughts on what I could check?
Thanks

Hi Mike,
Thank you for your post.
If the user can open EMC on other server, it means the RBAC permission is fine.
If other user can work on this server, it means the server settings are fine.
What I can think of is to get the RBAC permission and AD permission of a problematic user and a good user have compared with them.
In addition, disabling UAC can also be a good try.
If there are any questions regarding this issue, please be free to let me know.
Best regard,
Jim

Unable to open iTunes - Quicktime failed to initialize (error -2096)

I can't open iTunes. An error message pops up that says: "Quicktime failed to initialize (error -2096). Quicktime is required to run iTunes. Please uninstall iTunes, then install iTunes again."
I've uninstalled and reinstalled iTunes multiple times and I still get the same error message. I've even tried uninstalling and reinstalling Quicktime, but that doesn't work either.
Please help!

Hello jms1775,
And welcome to Apple Discussions!
Have you had a chance to look at this Apple support documented related to this issue? If not, it would be a good place to start.
http://support.apple.com/kb/TS1875
Hope it helps.
B-rock

EMC initialization failed due to unexpected error

Dear All,
I am worrying like anything since morning. I do not know what happened but my EMC is not opening in Exchnage 2010 Sp2.
ERROR:
unexpected error [0x78D6DC13] while executing command 'Get-LogonUser'
Please suggest us something.
Though exchange working fine, i have to work through EM Shell. :(
Regards, Jay.

Hi,
You can try the following solution and check the result:
Simple solution: "C:\Program Files\Microsoft\Exchange Server\V14\Bin\CmdletExtensionAgents\ScriptingAgentConfig.xml" was defect.
Repair it (I copied a working one from another node) and all works fine again.
If you do not need it, delete it and then run >>Disable-CmdletExtensionAgent “Scripting Agent”<<
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Exchange Management Console, Initialization Failed

Hi,
Today when i open the Exchange 2010sp1 EMC it gave me this error
The following error occurred while attempting to connect to the specified Exchange Server HUBC01.contoso.int
The attempt to connect to
http://HUBC01.contoso.int/powershell using "kerberos" authentication failed: connection to remote server failed with following error message: The WinRM client cannot process the request because the server name cannot be resolved. for more information see
the about_remote-troubleshooting help topic
Your quick response really appriciated,
Dilshan

Hi Dilshan,
Any updates?
Please check whether "WinRM IIS Extension" is installed in the Server Manager->Feature. If not, please install it.
Please also try to use another member of Organization Management to log on to Exchange to open EMC to test.
Frank Wang
I came across this thread when troubleshootinga a similiar problem. I login to Exchange this morning and I'm unable to open EMC and get an Initialization Failed error message. It states
The attempt to connect to http://exchange2010server/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: Access is denied.
I'm curious if the proposed solution to this thread would solve my problem. I'm a little stumped as to what could cause this, other than the fact a colleague of mine installed the Exchange management tools on his Win7 workstation. That really
is the only change that has taken place in the last week.
Any thoughts?

Fail Safe adding database to group gives error "FS-10006: Unable to open.."

Environment:
Fail Safe 3.4.2
Oracle 11.2.0.1 64bit
Windows 2008 Server 64bit
Two nodes in an active/passive cluster using windows clustering and oracle fail safe.
Problem:
We have created the windows cluster, installed fail safe on both clustered nodes, installed the database software, verified the cluster, created a group and added a virtual address to the group. We also managed to verify the stand alone database instance without any issues. However, when we try to add the database to the group we get the following errors:
Versions: client = 3.4.1    server = 3.4.2    OS =
Operation:   Adding resource "THORD" to group "EO_THORD_GRP"
Starting Time:   Jul 26, 2010   16:23:04
Elapsed Time:   0 minutes, 2 seconds
1   16:23:04 Starting clusterwide operation
2   16:23:05 FS-10370: Adding the resource THORD to group EO_THORD_GRP
3   16:23:05 FS-10371: ClusterNode1 : Performing initialization processing
4   16:23:05 FS-10371: ClusterNode2 : Performing initialization processing
5   16:23:05 FS-10372: ClusterNode1 : Gathering resource owner information
6   16:23:05 FS-10372: ClusterNode2 : Gathering resource owner information
7   16:23:05 FS-10373: ClusterNode1 : Determining owner node of resource THORD
8   16:23:05 FS-10374: ClusterNode1 : Gathering cluster information needed to perform the specified operation
9   16:23:05 FS-10374: ClusterNode2 : Gathering cluster information needed to perform the specified operation
10 16:23:05 FS-10375: ClusterNode1 : Analyzing cluster information needed to perform the specified operation
11 16:23:05   >>> FS-10652: ClusterNode1 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
12 16:23:05   >>> FS-10652: ClusterNode2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
13 16:23:05 FS-10376: ClusterNode1 : Starting configuration of resource THORD
14 16:23:05 FS-10378: ClusterNode1 : Preparing for configuration of resource THORD
15 16:23:05 FS-10380: ClusterNode1 : Configuring virtual server information for resource THORD
16 16:23:05    ** ERROR : 0x138F: The cluster resource could not be found.
17 16:23:06    ** ERROR : FS-10006: Unable to open the resource
18 16:23:06    ** ERROR : FS-10012: Failed to bring the cluster resource online. Check the Windows event log for messages
19 16:23:06    ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource THORD
20 16:23:06    ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
21 16:23:06    ** ERROR : FS-10497: Starting clusterwide rollback of the operation
22 16:23:06 FS-10488: ClusterNode1 : Starting rollback of operation
23 16:23:06 FS-10489: ClusterNode1 : Completed rollback of operation
24 16:23:06    ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
25 16:23:06 Please check your Windows Application log using the Event Viewer for any additional errors
26 16:23:06 The clusterwide operation failed !
FS-10006: Unable to open the resourceAll the cluster resources seem to be online. We're all out of ideas here, can someone please shead some light on this or have any ideas how we can go on about this.
Your help is highly appreciated.
Thanks

I am getting into the issue (step-6) when I run standalone resource verify after successful step-5 and need your advice.
I will give you information about the infrastructure -
NODE1-2K8-ORADBND1
NODE2-2K8-ORADBND2
Cluster IP-
Virtual IP on NODE1 and NODE2 host file -
OS - Windows 2008 R2 64 bit
Oracle Database - 11gR2
Oracle FailSafe - 3.4.1.6
Oracle SID- ORA11
(ORA11 is up and running on NODE1 active node while running add to group option from - Groups/Standalone Resources to verify the instance and it gets error)
Here is the error log -
Versions: client = 3.3.3 ; server = 3.4.1 ; OS =
Operation: Adding resource "ORA11" to group "Available Storage"
Starting Time: Sep 02, 2010 12:50:06
Elapsed Time: 0 minutes, 1 seconds
1 12:50:06 Starting clusterwide operation
2 12:50:06 FS-10370: Adding the resource ORA11 to group Available Storage
3 12:50:06 FS-10371: 2K8-ORADBND1 : Performing initialization processing
4 12:50:06 FS-10371: 2K8-ORADBND2 : Performing initialization processing
5 12:50:07 FS-10372: 2K8-ORADBND1 : Gathering resource owner information
6 12:50:07 FS-10372: 2K8-ORADBND2 : Gathering resource owner information
7 12:50:07 FS-10373: 2K8-ORADBND1 : Determining owner node of resource ORA11
8 12:50:07 FS-10374: 2K8-ORADBND1 : Gathering cluster information needed to perform the specified operation
9 12:50:07 ** ERROR : FS-10791: The Oracle Database resource provider failed while gathering cluster information for resource ORA11
10 12:50:07 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
11 12:50:07 Please check your Windows Application log using the Event Viewer for any additional errors
12 12:50:07 The clusterwide operation failed !
Thanks for your help!

Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeep

Hi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

"Unable to open a virtual memory file" and "Unable to initialize Photoshop" errors

Hi
I installed Photoshop CS6 64-bit on Windows 7 SP1 64-bit.
When it starts, these two messages are displayed:
Unable to open a virtual memory file because the file is locked. You do not have permission or the file is being used by another program. ...
Unable to initialize Photoshop because the file is locked. You do not have permission or the file is being used by another program. ...
How come?
Thanks
Bye

In other words, I have installed Photoshop CS6 64-bit (using the default directory) on Windows 7 SP1 64-bit.
My computer has 4 GB of RAM and a virtual memory file of 6644 MB.
When it starts, the two above messages are displayed also with an account of Administrator type?
How come?
Thanks
Bye

HT203175 "apple mobile device failed to start" "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to

"apple mobile device failed to start" "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to do ? Ken

I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help?

I have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed

i have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed.
when double clicking on the image it says unable to open and gives me the option to search the app store.
any help would be much appreciated
Adam

Well, first, just make sure it's the Mac version and not the Windows version (which indeed would not run on your Mac). You say "Windows Office" which is why I mention it. I think you probably just mean "Microsoft Office" though.
Next, is this on a disk (DVD), or did you purchase and download it from the Microsoft site?
Matt

"Software Usage Metrics initialize failed" error when open Report Manager, after moving ReportServer from SSRS 2008 to SSRS 2012 (Native Mode)

I've asked this question in SQL Server Upgrade forume, I'm asking here as well:
Your help is highly appreciated!
After migrating ReportServer db from 2008 to 2012, when access Report Manager throughhttp://myserver:80/Reports, I got the error below:
ui!ReportManager_0-3!11d8!02/04/2013-15:19:12:: e ERROR: Software Usage Metrics initialize failed
The process is below:
•I successfully installed SQL Server 2012 (64-bit) Enterprise as a Native Mode on a server who runs Windows 7 Enterprise SP1 (64-bit).
•I restored "ReportServer2008To2012" and "ReportServer2008To2012TempDB" in SSRS 2012 from the db files backed up in SQL 2008. In SSRS 2008, I have SSRS Model, ad-hoc reports based on model, and I also have canned reports built through BIDS
report server project.
•I reconfigured both databases' Compatibility level to SQL Server 2012(110) from SQL Server 2008(100).
•I configured SSRS through Reporting Services Configuration Manager as below:
> I chosen "Use built-in account:" as Service Account
> In "Database" tab, I selected "Choose an existing report server database" and choose "ReportServer2008To2012" db, I used "Windows Authentication" (my login has the System Administrator priviledge). I got all 4 parts
success: Verifying database sku = Success; Generating rights scripts = Success; Applying connection rights = Success; Setting DSN = Success.
> I went to "Scale-out Deployment" to check if the initializing succeed, I found nothing there.
Here are what I did from different approaches:
A •I went to "Encryption Keys" and restored the key I backed up from SSRS 2008, after retoring, I got two initialized instances: One is on my current server (SSRS 2012), the other one is from the old server (SSRS 2008).
   I deleted the old one(SSRS 2008) through "Remove Server" action and kept the one on my current server(SSRS 2012).
   After I restart SSRS service, and tried to connect Report Manager, I got "An internal error occurred on the report server. See the error log for more details."
   I checked the log file, the error is actually "ERROR: Software Usage Metrics initialize failed"
B •I also tried to "Delete Encrypted Content" and did see the SSRS was initialized through checking it on "Scale-out Deployment", however when I tried to open Report Manager, I got the same error.
Anyone had the same issue? Any solution? Thanks in advance!

Your help is highly appreciated!
After migrating ReportServer db from 2008 to 2012, when access Report Manager through
http://myserver:80/Reports, I got the error below:
ui!ReportManager_0-3!11d8!02/04/2013-15:19:12:: e ERROR: Software Usage Metrics initialize failed
The process is below:
•I successfully installed SQL Server 2012 (64-bit) Enterprise as a Native Mode on a server who runs Windows 7 Enterprise SP1 (64-bit).
•I restored "ReportServer2008To2012" and "ReportServer2008To2012TempDB" in SSRS 2012 from the db files backed up in SQL 2008. In SSRS 2008, I have SSRS Model, ad-hoc reports based on model, and I also have canned reports built through BIDS
report server project.
•I reconfigured both databases' Compatibility level to SQL Server 2012(110) from SQL Server 2008(100).
•I configured SSRS through Reporting Services Configuration Manager as below:
> I chosen "Use built-in account:" as Service Account
> In "Database" tab, I selected "Choose an existing report server database" and choose "ReportServer2008To2012" db, I used "Windows Authentication" (my login has the System Administrator priviledge). I got all
4 parts success: Verifying database sku = Success; Generating rights scripts = Success; Applying connection rights = Success; Setting DSN = Success.
> I went to "Scale-out Deployment" to check if the initializing succeed, I found nothing there.
Here are what I did from different approaches:
A •I went to "Encryption Keys" and restored the key I backed up from SSRS 2008, after retoring, I got two initialized instances: One is on my current server (SSRS 2012), the other one is from the old server (SSRS 2008).
   I deleted the old one(SSRS 2008) through "Remove Server" action and kept the one on my current server(SSRS 2012).
   After I restart SSRS service, and tried to connect Report Manager, I got "An internal error occurred on the report server. See the error log for more details."
   I checked the log file, the error is actually "ERROR: Software Usage Metrics initialize failed"
B •I also tried to "Delete Encrypted Content" and did see the SSRS was initialized through checking it on "Scale-out Deployment", however when I tried to open Report Manager, I got the same error.
Anyone had the same issue? Any solution? Thanks in advance!

Sending of message failed. Unable to open the temporary file C:\Users\Admin\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting.

after opening an email I knew to be a phishing attempt, I forwarded it to my bank's spam/phishing email address. I did NOT click any link in the suspicious email. only forwarded it.
now when I try to send an email I get the following error message:
Sending of message failed.
Unable to open the temporary file C:\Users\Admin\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting.
I can't find a temp directory. where is this and how do I fix it?

Try to start *Windows* in safe mode with networking enabled.
- Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
- Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still in Windows safe mode, start Thunderbird in safe mode.
- https://support.mozilla.org/en-US/kb/safe-mode
Does the problem go away?

"Mode_sense error" & "initialization failed: unable to sense robotic device

I use Exabyte autoloader and Netbackup server on Solaris 9 sparc station. When booting system, got following error information:
/pci@le, 60000/LSILogic, scsi@4/st@1,0(st31)
VXA-2 options value invalid bits set: 0x4000
ermesx tl8cd[322]: TL8(1)Mode_sense error
ermesx tl8cd[322]: TL8(1) Key 5h, ASC 24h, ASCQ 0h, INVILID FIELD IN CDB
ermesx tl8cd[314]: TL8(1) unavailable: initialization failed: unable to sense robotic device.
Your advice will be appreciated.
Jennifer

Thanks for advice. Following is the output:
# /usr/openv/volmgr/bin/sgscan
/dev/sg/c1t0l0: Changer: "EXABYTE VXA 1x10 1U"
/dev/sg/c1t1l0: Tape (/dev/rmt/0): "EXABYTE VXA-2"
# /usr/openv/volmgr/bin/tpconfig -d
Index DriveName DrivePath Type Shared
0 EXABYTEVXA-20 /dev/rmt/0cbn 8mm No
TL8(0) Definition DRIVE=1
Status
up
Currently defined robotics are:
TL8(0) robotic path = /dev/sg/c1t0l0,
volume database host = ermesx
ok probe-scsi-all
/pci@le, 600000/LSILogic, scsi@5
MPT Version 1.02, Firmware Version 1.03.37.00
Initiator ID is 7
Target 0
Unit 0 Removable Device type 8 EXABYTE VXA 1x10 1U A10B
Target 1
Unit 0 Removable Tape EXABYTE VXA-2 2109
I can not find ��Changer: EXABYTE VXA 1x10 1U�� in /usr/openv/share/device_mappings.txt. There is only ��
CHANGER:EXABYTE Robotic Tape Library�� in that mapping file.
Thanks.
Jennifer

Unable to open EMC : Initialization failed in Ex2010

Similar Messages

Maybe you are looking for