Unable to print envelopes.

As of late my all in one photosmart c5880 isn't printing envelopes. Tried various options to no avail.
Any suggestions?

Hi,
Please try:
For single envelope:
https://support.office.com/en-in/article/Create-and-print-a-single-envelope-1e982948-c37b-41b4-86ea-...
For more envelopes:
http://www.pcdon.com/page25.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Unable to print envelopes with latest HP driver for LaserJet 4

In April I downloaded the latest HP drivers for my HP LaserJet 4 to reinstall following work on my computer.
First I was just unable to print envelopes.
I redownloaded and had same results
I have uninstalled and re-installed a number of times.
I tried a "chat" with HP that went nowhere.
I was on hold for over an hour last night -- only to be told that I should email a request for assistance. Fat Chance! Try it!
I still have the manual from when it was new. It had no answer except a Customer Service phone number which has long been shut down.
The present condition is that I am unable to print anything.
Customer Service is a sick myth.

Hello, DP Photo, sounds like a scanning issue with the software. To start I want you to completely remove the software and then reinstall the programming from the packages available on the website I am going to link you to below. Use the full-feature software if available.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3974279
Try that and let me know how it goes!
-Spencer
PS I hope you are having a wonderful day!

I am unable to print envelopes

I can't print # 10 envelopes. I hae never had this problem before. I am using the same software that has always worked. I have two printers HP 6988 and HP 6540. I have this problem with both.
Billie

I was using MS Word 2013. I was using the "Mailings" ribbon>"Envelopes" option to try to print envelopes. For some reason it just wouldn't work. I was unsuccessful at trying to print that way. I was finally able to print envelopes after downloading a few different templates. When you click new document, it allows you to select from some generic templates or download more templates. This is where I downloaded the templates.

UNABLE TO PRINT ENVELOPES WITH HP 309a

i have an HP 309a printer and I suddenly cannot print envelopes. I have the correct size in the template but when I put the envelope (correctly) into the printer I get an error message "wrong size." This happened recently and I suspect it might be connected with the updates. I can still print labels so nothing is changed there.

Thank you. I'm sorry that it took so long to respond but my brand new G4's logic board failed and had to be replaced! Now when I tried to log in with my username and password at the CUPS local host site, it said that the login was wrong, Do I have to go someplace else to log into CUPs and get a new password and username?
I will try to find out what CUPS is while I wait for your response.
The printers: Lexmark 1100 series is on the Lexmark site: http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:0:0:0 where I got the driver.
Thanks again,
Vusumuzi Zulu

HT2486 I am unable to print envelope addresses from address book

can get my card (return address) to print, but not address

HI I hope you are doing well and welcome to the forum;
What applcation are you using to print from the Tablet Are you using this App Go here This will work when both devices (Printer and tablet are in the same network e.g. your homenetwork assuming that you only have 1 router)
If the printer shows online folllow this article in the HP support page click here
try this is the printer is showing offline and is not printing. from the home computer you mentioned Win 7.
Hope this helps;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Printing Envelopes Other Than #10 with HP LaserJet 4240 Envelope Feeder

I'm trying to use an HP LaserJet 4240 and an HP 75-sheet Envelope Feeder to print envelopes from FileMaker Pro. HP's specifications for the envelope feeder note that it accepts "various sizes of envelopes." However, we are unable to specify any size other than #10 envelopes in the print dialog box. #10 envelopes print just fine, but choosing a different envelope size (like C5) in Page Setup and attempting to print brings up an error message saying that only #10 envelopes can be printed and asking if the document should be scaled to fit that size envelope. If you agree and continue printing, the printer shows "Service Error" on its display.
The workaround I've used so far is to put text out to the very edge of the #10 margins in FileMaker and just load larger envelopes. This leaves too large a margin, however, and I'd really like to be able to print to the actual size of a C5 envelope.
I've tried specifying a letter sized sheet of paper and setting the paper feed to "Envelope Feeder" but the printer is smart enough to know that letter paper can't go through the feeder and asks to specify a different tray.
Has anyone succeeded in specifying a custom envelope size that will print via the envelope feeder? I don't want to have to manually feed envelopes into the printer as that's why we purchased the envelope feeder in the first place!
Thanks in advance for any suggestions anyone can offer.

try this FREE little widget - it's the best solution for printing all types of envelopes …
http://www.ambrosiasw.com/utilities/easyenvelopes/
Alan

Officejet Pro 8500A - unable to print on odd-size paper

After a couple of hours of frustration, I have decided that I an unable to print on odd-sized paper on our brand new HP printer! On an older string in this user forum, one suggestion was to make a paper cut-out from regular sized paper to put on top of an envelope to "fool" the printer into thinking it was using standard sized paper. I am trying to print odd-sized wedding invitations, and in order to to do this, I wouldn't be able to use the paper guides intended to keep the smaller paper in the middle.
Another suggestion would be to create a "custom size" paper in the printer properties, which doesn't seem to be possible in Windows XP as far as I can see.
My card-stock paper measures 4 3/4" x 6 7/8" Neither 5 x 7" nor 4 x 6" will work and I have tried numerous others, such as Janpanese postcard, Index card 4 x 6, etc.
Any suggestions? This is frustrating enough to look at other namebrand printers next time, but I guess I'm stuck with this one for a while!

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Clicking on "Envelopes" only brings up "Envelope Options", and not the dialog box to print envelopes, but only on certain documents.

I'm using Word 2010, and up until a few weeks ago have never had trouble printing envelopes. Then one day I clicked on Envelopes to print one, and it only
brought up Envelope Options instead of the dialog box to print envelopes. Eventually the problem went away and it worked again. Then it happened again last week. I closed down everything Office-related and started back up, and it worked again. Now it's happened
again today, and even after shutting all Office products down, it still won't let me print envelopes. I have two printers and it happens no matter which one I choose. The strange thing is it apparently only happens on certain documents, because I can open
up another letter, hit "Envelopes" and paste in the address from the letter that won't print, and it will work fine. What is wrong with these certain documents that makes Word unable to bring up the print dialog? I can't find anything online relating
to this issue. Any ideas?

1. If you empty the whole document then click the Evelopes buttong, what will happen?
2. Check if there are any special macros in these specific documents
3. Try remove both of these printers, and check this issue again.
4. Will this behavior also happen when open these documents from the other computer?
You can also share a copy of the document in SkyDrive so I can check on it. (Remove any sensitive information)
Max Meng
TechNet Community Support

Konica Minolta magicolor 7450 Unable to print to Custom paper sizes

Hi
I have a Konica Minolta magicolor 7450 laser printer that (since switching to mac from windows) is unable to print to Custom paper sizes (entered in the print dialog box from within photoshop CS3) and nothing will print from illustrator CS3 at all.
I have OS 10.5.2 with the 10.1 photoshop update, and the 13.0.2 illustrator update.
When I use to use windows xp & photoshop CS2 I didn't seem to have trouble with this function, but since jumping over to mac & CS3, I can't print on any paperstock other than the defult sizes listed (which it dose perfectly) - I've re downloaded & installed the printers driver, downloaded & installed a firmware update for the printer and tried printing with a network cable & usb cable - all with no luck. I've also tried entering in the custom paper size in the printers LCD panel & setting in as default but it still wants to print on A4 or A3 paper...
Any ideas out there would be appreciated!

so I've been pulling my hair out for 2 days & nights now trying to figure out why I couldnt print on custom paper sizes - I've just now hit the "help" icon in the print dialog box and found this:
"Creating a custom page size
If you want to print on unusual size paper, such as an odd-size envelope or card, you may be able choose the paper’s size from the Paper Size pop-up menu. To find the Paper Size pop-up menu, choose File > Page Setup, if available. Otherwise, choose File > Print.
If you can’t find the size you need, you can create your own custom paper size.
To create a custom page size:
Open the document you want to print.
Choose File > Page Setup, if it’s available. Choose Page Attributes from the Settings pop-up menu, and then choose Any Printer from the Format For pop-up menu.
Choosing Any Printer ensures that your document can print on any printer that supports the paper size you select.
If Page Setup is not available, choose File > Print.
If the Print dialog contains only two pop-up menus and some buttons across the bottom, click the disclosure triangle beside the Printer pop-up menu.
Choose Manage Custom Sizes from the Paper Size pop-up menu.
Click the Add button.
Type a name for the paper size.
Enter values in the Paper Size and Printer Margins field."
All I had to change was the "any printer" setting from my (konica minolta) printers name to "Any Printer"!! now my custom paper sizes are printing fine and dandy!! phew!!!!!!!!

I am unable to print from my ipod to HP5510 which is listed as one of Apple's Airprinters

I am unable to print from my ipod to HP5510 which is listed in Apple's list of recognised Airprinters

Start up in safe mode
http://support.apple.com/kb/PH4373   <<< click here.
Restore your computer’s software
http://support.apple.com/kb/PH3840   <<< click here.
http://www.apple.com/buy/locator/   <<< click here.

HT4356 unable to print from my ipad mini

unable to print from ipad1 or ipad mini. tried all suggestions in support. This problem has been highlighted before is there a a problem with an software upgrade. I have hp 5510 that works fine fromPC.

I rebooted my BT router, Switched printer off and on, Checked printer on same wifi as router. closed ipad wifi to forget this network and reselected.
Printer worked OK on my ipad1 up until a few months ago it has never worked on my new ipad mini. works from my PC.

How do I use air print, after updating to 7.0 on iPad am unable to print. Pretty fed up with apples tricks

Unable to print to hp printer AirPrint after update to 7.0. 7.1

AirPrint Setup and Troubleshooting
http://www.apple.com/support/ipad/assistant/airprint/
How to print from your new iPad using AirPrint
http://www.imore.com/print-ipad-airprint
AirPrint Basics
http://support.apple.com/kb/ht4356
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Unable to print from HP Deskjet 1510

Scan and photocopy are working fine.HP print and scan doctor shows everthing is fine but I am unable to print test document.

Hi deepakgupta, Please try the following: Uninstall the software. Uninstalling the Printer Software.Unplug the USB printer cable.Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Turn Windows Firewall on or off.Create a new user account. Managing User Accounts and Logins (Windows 7).Reinstall using the Full Feature Software And Drivers. (Wait for the software to tell you to plug in the USB printer cable.) Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

HP Officejet Pro 8610 - Unable to print windows 8.1

Hi ,
I've recently purchased HP Officejet Pro 8610 and unable to print from windows.
I am running 64bit Windows 8.1
I can print from Web via email
I can print using the HP AiO Remote app in windows. This doesnt have full functionality and is also inconvenient if I am working on documents and I want to print.
I have tried the following:
- Uninstalling and reinstalling from CD provided with printer
- Using the HP printer troubleshooter assistant, no success
- Downloading the software direct from HP website
- Updating the firmware using OJP8610_R1416A.exe
-Changing the port to the network port (in this case it is 192.168.0.200, it responds to a ping, also set the printer to have a static ip)
This is the error message that i get when i try to print a test page when i choose printer properties in the control panel
"test page failed to print. would you like to view the printer troubleshooter for assistance"
I have trawlled through other member's issues and i cant seem to find a fix for myself
Please help
Appreciation in advanced

Hi @binhdai & @JFB2014
I would like to help you both the best I can, and I appreciate the troubleshooting efforts you have both made up to this point. Please try the steps below and let me know the outcome;
1. Uninstall the software - Uninstalling the Printer Software Instructions.
2. Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box.
3. Type in "spool" and press Enter or select OK.
4. Select and open the Drivers folder, select the x64 folder if you have a 64-bit Operating System or the w32 x 86 if you have a 32-bit Operating System.
5. Open the 3 folder, locate the HPBXPSRENDER.DLL file and rename it into HPBXPSRENDER.OLD
6. Reinstall the printer; HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
Fingers crossed
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

Hi there cv4928,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Unable to print envelopes.

Similar Messages

Maybe you are looking for