Unable to ssh to servers from Solaris u10 server

The majority of my systems were built with u5. We've recently added a few x86 VMs and a few zones running u10 and I'm having ssh issues with them. When I try to ssh to them, I'm unable to login using our keys and get presented with the password prompt. I've been looking at previous posts similar to this situation, but none seem fitting. I've tried creating a new dsa key as a test and below are the results.
$ ssh -i id_dsa2 -vvv newuser@newserver
Sun_SSH_1.1.2, SSH protocols 1.5/2.0, OpenSSL 0x0090704f
debug1: Reading configuration data /opt/build/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to newserver [10.10.100.99] port 22.
debug1: Connection established.
debug3: Not a RSA1 key file id_dsa2.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: no key found
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug3: key_read: no space
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: no key found
debug1: identity file id_dsa2 type -1
debug1: Remote protocol version 2.0, remote software version Sun_SSH_1.1.3
debug1: match: Sun_SSH_1.1.3 pat Sun_SSH_1.1.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-Sun_SSH_1.1.2
debug1: use_engine is 'yes'
debug1: pkcs11 engine initialized, now setting it as default for RSA, DSA, and symmetric ciphers
debug1: pkcs11 engine initialization complete
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: en-US
debug2: kex_parse_kexinit: en-US
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible
Unknown code 0
debug1: SSH2_MSG_KEXINIT sent
debug3: kex_reset_dispatch -- should we dispatch_set(KEXINIT) here? 0 && !0
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: en-US
debug2: kex_parse_kexinit: en-US
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: gss-group1-sha1-toWM5Slw5Ew8Mqkay+al2g==,diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug2: kex_parse_kexinit: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: Peer sent proposed langtags, ctos: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug1: Peer sent proposed langtags, stoc: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug1: We proposed langtags, ctos: en-US
debug1: We proposed langtags, stoc: en-US
debug1: Negotiated lang: en-US
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: Remote: Negotiated main locale: en_US.UTF-8
debug1: Remote: Negotiated messages locale: en_US.UTF-8
debug1: dh_gen_key: priv key bits set: 134/256
debug1: bits set: 1600/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /opt/build/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 68
debug1: Host 'newserver' is known and matches the RSA host key.
debug1: Found key in /opt/build/.ssh/known_hosts:68
debug1: bits set: 1576/3191
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug3: kex_reset_dispatch -- should we dispatch_set(KEXINIT) here? 0 && !0
debug1: newkeys: mode 1
debug1: set_newkeys: setting new keys for 'out' mode
debug3: aes-128-ctr NID found
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: set_newkeys: setting new keys for 'in' mode
debug3: aes-128-ctr NID found
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug2: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: Authentications that can continue: gssapi-keyex,gssapi-with-mic,publickey,password,keyboard-interactive
debug3: start over, passed a different list gssapi-keyex,gssapi-with-mic,publickey,password,keyboard-interactive
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup gssapi-keyex
debug3: remaining preferred: gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-keyex
debug1: Next authentication method: gssapi-keyex
debug2: we did not send a packet, disable method
debug3: authmethod_lookup gssapi-with-mic
debug3: remaining preferred: publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-with-mic
debug1: Next authentication method: gssapi-with-mic
debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible
Unknown code 0
debug2: we did not send a packet, disable method
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: id_dsa2
debug1: read PEM private key done: type DSA
debug3: sign_and_send_pubkey
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: gssapi-keyex,gssapi-with-mic,publickey,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug2: input_userauth_info_req
debug2: input_userauth_info_req: num_prompts 1
Password:
On the server
# /usr/lib/ssh/sshd -ddd
debug1: sshd version Sun_SSH_1.1.3
debug3: Not a RSA1 key file /etc/ssh/ssh_host_rsa_key.
debug1: read PEM private key done: type RSA
debug1: private host key: #0 type 1 RSA
debug3: Not a RSA1 key file /etc/ssh/ssh_host_dsa_key.
debug1: read PEM private key done: type DSA
debug1: private host key: #1 type 2 DSA
debug1: Bind to port 22 on ::.
Server listening on :: port 22.
debug1: Server will not fork when running in debugging mode.
Connection from 10.10.100.70 port 42731
debug1: Client protocol version 2.0; client software version Sun_SSH_1.1.2
debug1: match: Sun_SSH_1.1.2 pat Sun_SSH_1.1.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-Sun_SSH_1.1.3
debug2: Waiting for monitor
monitor debug1: list_hostkey_types: ssh-rsa,ssh-dss
monitor debug2: Monitor pid 3595, unprivileged child pid 3596
debug2: Monitor signalled readiness
debug1: use_engine is 'yes'
debug1: pkcs11 engine initialized, now setting it as default for RSA, DSA, and symmetric ciphers
debug1: pkcs11 engine initialization complete
debug1: list_hostkey_types: ssh-rsa,ssh-dss
monitor debug1: reading the context from the child
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug2: kex_parse_kexinit: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: GSS-API Mechanism encoded as toXXXXlw5Ew8Mqkay+al2g==
debug1: SSH2_MSG_KEXINIT sent
debug3: kex_reset_dispatch -- should we dispatch_set(KEXINIT) here? 0 && !0
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: gss-group1-sha1-toWMXXXXEw8Mqkay+al2g==,diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug2: kex_parse_kexinit: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: aes128-ctr,aes128-cbc,arcfour,3des-cbc,blowfish-cbc,aes192-ctr,aes192-cbc,aes256-ctr,aes256-cbc
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: en-US
debug2: kex_parse_kexinit: en-US
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: Peer sent proposed langtags, ctos: en-US
debug1: Peer sent proposed langtags, stoc: en-US
debug1: We proposed langtags, ctos: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug1: We proposed langtags, stoc: en-CA,en-US,es-MX,es,fr,fr-CA,i-default
debug1: Negotiated main locale: en_US.UTF-8
debug1: Negotiated messages locale: en_US.UTF-8
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received
debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent
debug1: dh_gen_key: priv key bits set: 125/256
debug1: bits set: 1582/3191
debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT
debug1: bits set: 1602/3191
debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent
debug2: kex_derive_keys
debug3: kex_reset_dispatch -- should we dispatch_set(KEXINIT) here? 0 && !0
debug1: newkeys: mode 1
debug1: set_newkeys: setting new keys for 'out' mode
debug3: aes-128-ctr NID found
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: set_newkeys: setting new keys for 'in' mode
debug3: aes-128-ctr NID found
debug1: SSH2_MSG_NEWKEYS received
debug1: KEX done
debug1: userauth-request for user newuser service ssh-connection method none
debug1: attempt 0 initial attempt 0 failures 0 initial failures 0
debug2: input_userauth_request: setting up authctxt for newuser
debug2: input_userauth_request: try method none
Failed none for newuser from 10.10.100.70 port 42731 ssh2
debug1: userauth-request for user newuser service ssh-connection method publickey
debug1: attempt 1 initial attempt 0 failures 1 initial failures 0
debug2: input_userauth_request: try method publickey
debug1: temporarily_use_uid: 516/516 (e=0/0)
debug1: trying public key file /opt/newuser/.ssh/authorized_keys
debug3: secure_filename: checking '/opt/newuser/.ssh'
debug3: secure_filename: checking '/opt/newuser'
debug3: secure_filename: terminating check at '/opt/newuser'
debug1: matching key found: file /opt/newuser/.ssh/authorized_keys, line 2
Found matching DSA key: 3a:73:9a:93:dd:6e:ae:fb:08:05:e1:16:32:c5:b0:db
debug1: restore_uid: 0/0
debug1: ssh_dss_verify: signature correct
debug2: Starting PAM service sshd-pubkey for method publickey
debug3: Trying to reverse map address 10.10.100.70.
debug2: userauth_pubkey: authenticated 0 pkalg ssh-dss
Failed publickey for newuser from 10.10.100.70 port 42731 ssh2
debug1: userauth-request for user newuser service ssh-connection method keyboard-interactive
debug1: attempt 2 initial attempt 0 failures 2 initial failures 0
debug2: input_userauth_request: try method keyboard-interactive
debug1: keyboard-interactive devs
debug2: Starting PAM service sshd-kbdint for method keyboard-interactive
debug2: Calling pam_authenticate()
debug2: PAM echo off prompt: Password:
debug2: Nesting dispatch_run loop
Connection closed by 10.10.100.70
debug1: Calling cleanup 0x8065f39(0x80c7358)
debug1: Calling cleanup 0x806057f(0x80c8418)
debug1: Calling cleanup 0x80810c0(0x0)
monitor debug1: child closed the communication pipe before user auth was finished
monitor debug1: Calling cleanup 0x80810c0(0x0)
monitor debug1: Calling cleanup 0x80810c0(0x0)

I'm lost on why it finds the key, buts fails to accept it. Our build server is not able to deploy to these new systems, even though we use puppet to create the users consistently on each server. Same authorized_keys, sshd_config etc...
debug1: matching key found: file /opt/newuser/.ssh/authorized_keys, line 2
Found matching DSA key: 3a:73:9a:93:dd:6e:ae:fb:08:05:e1:16:32:c5:b0:db
debug1: restore_uid: 0/0
debug1: ssh_dss_verify: signature correct
debug2: Starting PAM service sshd-pubkey for method publickey
debug3: Trying to reverse map address 10.10.100.70.
debug2: userauth_pubkey: authenticated 0 pkalg ssh-dss
Failed publickey for newuser from 10.10.100.70 port 42731 ssh2
Any help would be appreciated.

Similar Messages

Unable to send out mails from Solaris 10 Server

We are in the process of migrating all our Solaris 8 servers to Solaris 10 servers. I have installed core distribution of Solaris 10 with only ssh running and few additional packages such as SUNWntp etc. which do not come with Core. I do not want to run sendmail daemon, but be able to send out emails from this host. I tried adding smart host DS entry in /etc/mail/sendmail.cf - I tried both hand editing of this file and compiling a new one to hardcode smarthost entry -. But mailing works only when sendmail daemon is running otherwise, I am unable to sendout mails. Can you please share your knowledge to resolve this issue.
Thanks,
Karthik

I use /etc/mail/aliases file and I do not run sendmail on any of my servers.
I have an entry for root aliased to <my.email.address>,<my.coworker.email.address> so any system messages are sent to us at our corp email addresses. Our servers are setup to use corporate DNS which includes entries for corp. mail servers.
HTH
John
Edited by: SolarisSAinPA on Apr 2, 2008 2:02 PM
This method worked for Solaris8. I'm having somedifficulty making it work for Solaris10. We have no mailhost definition in DNS, so I'm not sure if that is why this does not work or is there something specific to Solaris10 that prevents me from using the method I describe earlier.
If I caused you extra work/confusion because of my earlier post, my apologies.
John

Unable to SSH into both remote & VM machine server

Unable to SSH into both remote & VM machine server
Getting the message
"fork failed: Resource temporarily unavailable"
"ssh_exchange_identification: Connection closed by remote host"
"ssh_exchange_identification: Connection closed by remote host"
"ssh_exchange_identification: Connection closed by remote host"
Please help.

These are the processes currently running: from top command.
These are the ulimit -a settings
This is the output of trying to ssh into local Ubuntu VM (I am able to login here via VirtualBox interface)
$ssh -v -v -v [email protected]
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /Users/spgen/.ssh/config
debug1: /Users/spgen/.ssh/config line 1: Applying options for *
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 102: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Executing proxy command: exec ssh 10.0.2.15 -W 192.168.1.11:22
debug1: permanently_drop_suid: 501
debug1: identity file /Users/spgen/.ssh/id_rsa type -1
debug1: identity file /Users/spgen/.ssh/id_rsa-cert type -1
debug1: identity file /Users/spgen/.ssh/id_dsa type -1
debug1: identity file /Users/spgen/.ssh/id_dsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
fork failed: Resource temporarily unavailable
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
This is the output of trying to SSH into remote AWS server. ( I am able to login through web interface here)
$ssh -v -v -v -i /Users/spgen/pem-files/123.pem [email protected]
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /Users/spg/.ssh/config
debug1: /Users/spgen/.ssh/config line 1: Applying options for *
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 102: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Executing proxy command: exec ssh 10.0.2.15 -W 54.94.230.41:22
debug3: Incorrect RSA1 identifier
debug1: permanently_drop_suid: 501
debug3: Could not load "/Users/spgen/pem-files/123.pem" as a RSA1 public key
debug1: identity file /Users/spgen/pem-files/123.pem type -1
debug1: identity file /Users/spgen/pem-files/123.pem-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
fork failed: Resource temporarily unavailable
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host
ssh_exchange_identification: Connection closed by remote host"
I guess the processes is not the issue, but maybe something to do with ssh config files.
As you rightly guessed 'fork failed' is happening on the local system. Would appreciate any pointers.
TIA.

Conflict Resolver Sync Error - Unable to retrieve conflict information from the sync server

So I have been using iTunes with my iPhone 3GS and now my iPhone 4 to sync with my Outlook for many years now and it has been flawless.
I recently bought a new iPad and started syncing it as well.
Now as of late, after every 2 or 3 syncs, I get an error from iTunes displaying the Conflict Resolver and it says there are 42 sync conflicts.
When I try use the Review Now button it shows up and the issues are between my iPhone and Outlook and are only related to contacts.
As soon as I try to choose which record to resolve, the window immediately disappears without giving me a chance to finish and I get another dialog window with the error:
Unable to retrieve conflict information from the sync server.
Please try again the next time the conflict resolver window is presented.
When I try to sync again it seems to be fine. But then after I sync my iPad and theny iPhone again it shows up and it still won't let me resolve the conflicts.
I have tried the following:
1) Rest Sync History on all devices
2) I have had iTunes replace all the contacts on the iPad from iTunes
3) I have changed the conflict resolver to only notify when 50% of the data will be changed
I have had no such luck.
If I add a contact to Outlook or to my iPhone and then sync it seems to be syncing the new addtions correctly. However, I cannot get this issue with this 42 conflicts resolved for some reason. This has been going on for a month now.

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

Syncing my phone it says I have conflicts when then I get the message "Unable to retrieve conflict information from the sync server. Please try again next treset Sync history and hasn't helped.

When syncing my phone it says I have contact conflicts which I try to resolve and then I get the message "Unable to retrieve conflict informaiton from the sync server. Please try again next time the conflict resolver window is presented". I have reset the Sync History but hasn't helped. Suggestions?

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

Cannot access conflicts unable to retrieve contact information from the sync server.

ITunes error message Cannot access conflicts unable to retrieve contact information from the sync server.

I got this advice from Gator5000e on Apple Supposrt Communities:
I use Windows 7 so the path to find this file
might be different under a different OS.
Close iTunes. Search on the words "conflicts.synconflicts".
I renamed it to conflictsold.synconflicts the .synconflicts is the extension so you can't
rename that.
Then restarted Windows. As a test I made changes to a note in NOTES on each device. Then connected them one at a time to my computer which has iTunes 10 and Runs Windows 7, it worked !

Unable to start Managed servers from admin console

Hello!
We have a problem to start Managed Servers throw Node manager.
We get an error:
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Boot identity properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/boot.properties">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Boot identity properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/boot.properties"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Startup configuration properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/startup.properties">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Startup configuration properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/startup.properties"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server error log also redirected to server log>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Server error log also redirected to server log
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Starting WebLogic server with command line: /software/psoft/pt851/webserv/peoplesoft/bin/startManagedWebLogic.sh >
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Starting WebLogic server with command line: /software/psoft/pt851/webserv/peoplesoft/bin/startManagedWebLogic.sh
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Working directory is '/software/psoft/pt851/webserv/peoplesoft'>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Working directory is '/software/psoft/pt851/webserv/peoplesoft'
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Rotated server output log to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out00001">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Rotated server output log to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out00001"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server error log also redirected to server log>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Server error log also redirected to server log
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server failed during startup so will not be restarted>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Jan 26, 2012 2:17:54 PM> <WARNING> <Exception while starting server 'PIA1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'PIA1'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Additional information:
weblogic 10.3.3
PT8.51.11
Linux x86_64 RH5
When we starting Manged servers manualy, it's works fine.
Thank you.

Hello!
The problem is found.
We tried to startup managed server by running startManagedServer.sh script, but this script expecting to get parameters.
The NodeManager unable to send parameters to script that appears in nodemanager.properties file (StartScriptName).
So, I created a new script startPIA.sh, that calls to startManagedServer.sh and sends it 2 parameters:
./startManagedWebLogic.sh $SERVER_NAME $ADMIN_URL
Now, we can start and stop managed servers from admin console, BUT we still have an error in NodeManager:
<Jan 29, 2012 11:15:39 AM> <INFO> <peoplesoft> <PIA1> <Server failed during startup so will not be restarted>
Jan 29, 2012 11:15:39 AM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Jan 29, 2012 11:15:39 AM> <WARNING> <Exception while starting server 'PIA1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Jan 29, 2012 11:15:39 AM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'PIA1'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
There are no errors in managed servers logs.
PIA1.out:
<Jan 29, 2012 11:15:38 AM> <INFO> <NodeManager> <Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'>
Attempting to start WebLogic Server PIA1
No activity will be logged to this window.
Server activity will be logged to /software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1_*
PID for WebLogic Server PIA1 is: 27018
<Jan 29, 2012 11:15:39 AM> <FINEST> <NodeManager> <Waiting for the process to die: 26847>
<Jan 29, 2012 11:15:39 AM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Jan 29, 2012 11:15:39 AM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
The status of managed server in admin console is RUNNING, but "Status of Last Action" is FAILED.
What can be the reason?
Thank you.

Internet access from Solaris 10 server

HI
we have Sparc T-4 servers running solaris 10. i need one of the servers to be able to reach to Internet. However i am not able to even ping 8.8.8.8 .
i am able to browse internet using firefox after i changed the proxy settings in the browser.
can some one help in steps to configure internet access. i am installing Ops Center and it needs connectivity to reach to My Oracle Support over Ineter Net.
thanks
-Muneer

If you are able to browse with Firefox on your server then Internet works.
If you have some troubles with Ops Center, you should certainly configure the HTTP_PROXY/HTTPS_PROXY variables and in this case I suggest to push your question in the Ops Center community : Oracle Enterprise Manager Ops Center (MOSC)

I am unable to open some emails from an exchange server.

Since I updated to iOS7 I have been unable to download most emails from a work exchange server. In most cases it appears to be downloading the message yet nothig appears after a lenghty wait.

A reset of the device is a good first step:
Hold the home button + the lock button for about 10-12 seconds until the Apple logo appears. You will not lose any data or current settings.
If you have already done this and it didn't resolve the issue, try remove the email accound and then re-add it.

How to view all user_source on others servers from one admin server?

Hello. Thank you for helping.
I am not able to view the source for other schemas locally or on remote servers, depending on the user logged, only for that schema, or something like that.
I use this command to view the source of a procedure:
select line, text
from user_source
where type='PROCEDURE'
and name='MY_PROC1'
order by line;
or this:
...from sys.user_source...
or this:
...from sys.user_source@dblink1...
Any suggestions are greatly appreciated.

Okay, the DDL method is not going to work. Let me go back to my original question:
I use this command to view the source of a procedure, but I still cannot select source from a remote server across a dblink. How do I specify the remote schema with the user_source?
select line, text
from user_source
where type='PROCEDURE'
and name='MY_PROC1'
order by line;
or this:
...from sys.user_source...
or this:
...from sys.user_source@dblink1...
To APC: Regarding your comments about reading the docs, understanding privileges, decent source control and configuration management, etc., I would like to offer a few arguments which I think invalidates these (your entrenched) assumptions about proper Oracle development and the use of forums. Contact me offline if you are interested in learning more about the superior approach to development my work embodies.
Edited by: user652257 on Jun 23, 2009 12:50 PM

Unable to start managed servers from Admin Console "FAILED_NOT_RESTARTABLE"

I recently installed WebLogic 10.3.5, JRockit, and ECM 11.1.1.5. I'm to the point where I am trying to get Nodemanager configured so I can stop/start managed servers through the admin console. I have the following listed in Environment > Servers:
AdminConsole - running
IBR_server1 - FAILED_NOT_RESTARTABLE
managedServer1 - FAILED_NOT_RESTARTABLE
UCM_server1 - FAILED_NOT_RESTARTABLE
I followed the tutorial at http://blogs.oracle.com/jamesbayer/entry/weblogic_nodemanager_quick_sta to get to the point where the AdminServer starts when the server reboots, so I think Nodemanager is working there. If I view Machines > Monitoring, it says Nodemanager "Reachable." However, when I go to restart IBR_server1, managedServer1, or UCM_server1, I get the FAILED_NOT_RESTARTABLE status. I am using the weblogic server's IP for the machine name/host because our DNS is still screwed up. Would that have any affect on this?
I'm completely unsure what to do now. The Nodemanager log shows:
INFO - <Loading domains file: E:\oracle\MIDDLE~1\WLSERV~1.3\common\nodemanager\nodemanager.domains>
WARNING - <Domains file not found: E:\oracle\MIDDLE~1\WLSERV~1.3\common\nodemanager\nodemanager.domains>
INFO - <Loading identity key store: FileName=E:/oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
WARNING - <Node manager configuration properties file 'E:\oracle\MIDDLE~1\WLSERV~1.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
So I'm confused why it's saying the properties file and domains file are not found... I've checked and they exist at
E:\oracle\middleware\wlserver_10.3\common\nodemanager\nodemanager.properties
and
E:\oracle\middleware\wlserver_10.3\common\nodemanager\nodemanager.domains
The domains file contains
base_domain=e\:\\oracle\\middleware\\user_projects\\domains\\base_domain
Which is correct.
Any idea what I'm missing here? I can provide more detail if needed. Thank you.
EDIT: I should add that I can start the UCM and IBR managed servers using the start up scripts on the server, but that's not what I'm after. I want everything controlled through the AdminConsole and want to be sure that when the server reboots, all the managed servers come back up correctly.
Edited by: user5824683 on Oct 5, 2011 5:04 PM
Edited by: user5824683 on Oct 5, 2011 5:09 PM

I did a bit of digging, and it seems I have an issue with -Xnohup... I've verified this arugment exists in all of my managed servers properties files, yet it still bombs when I try to restart from the webLogic console. I should note that if I start fresh from the server, I can start all my manager servers using WLST nmStart().
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Oracle JRockit(R) (build R28.1.3-11-141760-1.6.0_24-20110301-1430-windows-x86_64, compiled mode)
Starting WLS with line:
E:\java\JROCKI~1.1\bin\java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=IBR_server1 -Djava.security.policy=E:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=E:\oracle\middleware\user_projects\domains\base_domain\servers\IBR_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xnohup -Xverify:none -da -Dplatform.home=E:\oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\oracle\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=E:\oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=E:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\servers\IBR_server1 -Doracle.domain.config.dir=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\servers\IBR_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=E:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Ducm.oracle.home=E:\oracle\MIDDLE~1\ORACLE~2 -Dem.oracle.home=E:\oracle\middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://138.126.180.177:7001 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=e:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath weblogic.Server
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: –Xnohup
Caused by: java.lang.ClassNotFoundException: –Xnohup
     at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Could not find the main class: â€“Xnohup. Program will exit.
<Oct 6, 2011 12:38:13 PM> <FINEST> <NodeManager> <Waiting for the process to die: 4252>
<Oct 6, 2011 12:38:13 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Oct 6, 2011 12:38:13 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>

Warning: Solaris 10 x86 jumpstart (grub) from Solaris 8 server

Hi all,
I'm just posting this here in case someone comes across the same problem I did.
When trying to do a custom jumpstart installation on x86 boxes from a Solaris 8 SPARC server, Grub was failing to do TFTP of the "multiboot" and "x86.miniroot" files. A snoop of the traffic would reveal some "TFTP Error: not defined" packets.
Turns out this is a known bug:
http://sunsolve.sun.com/search/document.do?assetkey=1-1-6395719-1
The bug doesn't make any reference to jumpstart, and because of this it took me a while to find it.
I copied the in.tftpd binary from a Solaris 9 box, and it worked like a charm. (Would it be very difficult to issue a Solaris 8 patch?)
kind regards,

Here is the error output:
# ./add_install_client -i 192.168.1.51 -c sun1:/jumpstart/ -p sun1:/jumpstart/Sysidcfg/Solaris_10-intel/ host2 i86pc
unmount: warning: /tftboot/I86PC.Solaris_10-1 not in mnttab
unmount: /tftpboot/I86PC.Solaris_10-1 no such file or directory
mount: Mount point /tftboot.I86PC.Solaris_10-1 does not exist.
cleaning up preexisting install client "host2"
removing host2 from bootparams
rm: /tftboot/ is a directory
updating /etc/bootparams
ln: cannot create /tftpboot//pxegrub.I86PC.Solaris_10-1: File exists
Create a grub boot flloppy and edit GRUB menu to contain
the following entry:
title Solaris netinstall
rarp
kernel /I86PC.Solaris_10-1/multiboot kernel/unix -B install_media=192.168.1.100:/jumpstart/OS/intel
module /I86PC.Solaris_10-1/x86.miniroot
------------- end ---------------
So, I have tried this with the -i, -e -i+-e, with -s and without.
I have an entry in /etc/ethers and /etc/hosts. However, I don't think it is a FQDN or simular issue. Looks like a script issue.
/tftpboot/ ends up with
boot/
nbp. -> pxegrub.I86PC.Solaris_10-1
pxegrub.I86PC.Solaris_10-1
rm.192.168.1.51
/tftpboot/boot/
grub/
/tftpboot/boot/grub/
menu.1st
# cat menu.1st
default 0
timeout=30
title Solaris_10 jumpstart
kernel /i86PC.Solaris_10-1/multiboot kernel/unix -B install_config=192.168.1.100:/jumpstart,sysid_config=192.168.1.100:/jumpstart/Sysidcfg/Solaris_10-1-intel/,install_media=192.168.1.100:/jumpstart/OS/intel
module /I86PC.Solaris_10-1/x86.miniroot
---- end ----
Thanks for the help.
Aaron

Migration from Solaris Sparc server to Solaris x86

Hi ,
I would like to know.
Migration from SAP ECC6 , Oracle , Solaris Sparc to Ecc6, Oracle, Solaris x86 , Is this consider Heterogeneous or Homogeneous system copy?
Thanks.
Best Regards,
ck chai

Solaris on SPARC is a BIgEndian platform, Solaris on X86 is LittleEndian - so it's heterogeneous --> you need to use R3load to performa a migration - and you need to have a certified migration consultant on-site to do that migration (http://service.sap.com/osdbmigration --> FAQ).
Markus

Unable to catch raiseerror exception from MS SQL Server Exception in hibernate

I am using raiseerror in MS SQL Server exception to throw customized error and it is working fine in database.
But, I am unable to catch MS SQL Server Exception in hibernate. Please find the database & java syntax below.
SQL Server Syntax:-
    ALTER PROCEDURE [grantiumSQL].[ERROR_MESSAGE]
    @ERRMSG NVARCHAR(4000)
    AS
    BEGIN
    -- Return if there is no error information to retrieve.
    IF ERROR_NUMBER() IS NULL
        RETURN;
    DECLARE
        @ErrorMessage    NVARCHAR(4000),
        @ErrorNumber     INT,
        @ErrorSeverity   INT,
        @ErrorState      INT,
        @ErrorLine       INT,
        @ErrorProcedure NVARCHAR(200);
    -- Assign variables to error-handling functions that
    -- capture information for RAISERROR.
    SELECT
        @ErrorNumber = ERROR_NUMBER(),
        @ErrorSeverity = ERROR_SEVERITY(),
        @ErrorState = ERROR_STATE(),
        @ErrorLine = ERROR_LINE(),
        @ErrorProcedure = ISNULL(ERROR_PROCEDURE(), '-'),
        @ErrorMessage = @ERRMSG
    RAISERROR
        @ErrorMessage,
        @ErrorSeverity,
        1
        )WITH NOWAIT;
    END;
Java Syntax:-
public void callDeleteStoreProcedure(int workflowProjectId,String status){
boolean shouldCommit = HibernateUtil.beginTxn();
Session session = HibernateUtil.currentSession();
try
// query = session.getNamedQuery("deleteWorkflowProject_ora");
Query callStoredProcedure = session.createSQLQuery("{PROCEDUR_NAME(?,?)}");
callStoredProcedure.setInteger(0, prj);
callStoredProcedure.setString(1, status);
callStoredProcedure.executeUpdate();
     }catch (HibernateException e) {
     e.printStackTrace();
catch (Exception e) {
      e.printStackTrace();
HibernateUtil.commitTxn(shouldCommit);
Thanks in advance

HI! We have the same problem. Have you manage to resolve it?

Unable to view IDS logs from cisco VMS server

Hi,
Pls help me out for viewing IDS logs from my cisco vms server (4th edition with SP2,java 1_4_1.02)
Configured IDS sensor with IDS MC (2.0.1) and updated signatures with latest sig files,
Configured Security monitor to view my IDS sensor and showing TLS was connected and cisco IDS REDP/SDEE,when viewing logs error was server codes need to be update., unreconiged last saved IDS alarms.
Pls give me the solution
Regards
Ajay

Hi Ajay,
when you upgrade to sec mon 2.0.1, the database is the same, but the formats are different.. you need to do somethings for converting these formats, which might take hours together, if ur database has too many events...
for information to convert the file format, refer to this URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps3990/prod_release_note09186a0080386f72.html#wp1087204
see the section "Using the ConvertAndImport.pl Script after Upgrading from Security Monitor 1.2.3 to Security Monitor 2.0.1 "
do this and see.. let us know
Raj

Unable to ssh to servers from Solaris u10 server

Similar Messages

Maybe you are looking for