Unknown HZ value! - procps issue

I experience the error of:
[root@plugbox local]# ps
Unknown HZ value! (74) Assume 100.
PID TTY TIME CMD
3683 pts/0 00:00:00 bash
3691 pts/0 00:00:00 ps
when I run ps and top. It seems to be a problem with procps gentoo bug (and other distros).
I don't have any idea how to take a gentoo ebuild and convert it to archlinux.... ideas on how to resolve this?
Info:
archlinux running on a seagate dockstar (/pogoplug with 1.2Ghz armv5 processor and 128MB RAM).
Thanks!

Post this on the bug tracker, the maintainer of the package can include the patch and push it to the repos then.

Similar Messages

FPGA 2010 Compilation error - TclTasklC:project_028: Unknown property value

Hi, I'm using a cRIO 9075 and a NI 9211 to measure temperature for a project busy with. Everytime I try t compile code I have a compilation error that read as follows:
Compilation failed due to a Xilinx error.
Details:
ERROR: TclTasksC: project_028:Unknown property value "spartan6" specified for "PROP_DevFamily"
Can someone help me on how to resolve this error, I'm using LabVIEW FPGA 2010 and Xilinx 11.5
Regards
Solved!
Go to Solution.

What version of the NI-RIO driver do you have?
Attached is a chart with the different compatibilities of the RIO driver.
NI-RIO and LabVIEW Version Compatibility
http://digital.ni.com/public.nsf/allkb/577CC9A7DCFC73DF8625738400116CC3?OpenDocument
Is this a 64-bit machine? Also, the minimum version of LabVIEW that will work with the 9075 is LabVIEW 2010SP1. You can verify if you have this version by going into Measurement & Austomation Explorer and expanding software. If you do not have LabVIEW 2010SP1, you will need either the platform DVDs for 2010 SP1 or you can download the content from www.NI.com/src.
You will also want to verify that you have the 2010SP1 FPGA module and 2010SP1 RT module.
Also, does this issue occur with all FPGA VIs that you try to compile or only the one that you are currently working on?
You can check by doing two things:
1. Try to compile a blank FPGA VI (i.e. nothing on the block diagram or front panel)
2. Try to compile an FPGA VI from one of the example LabVIEW projects
Please post back if one of these troubleshooting steps resolved your issue or if you're still having problems.
Jordan

Partial Update - Unknown Dimension Value ID

Hello Old Endeca Friends,
I am getting a lot of these sorts of errors when I perform a partial update:
ERROR 04/25/13 16:56:21.115 UTC (1366908981115) DGRAPH {dgraph,update} Record change references unknown dimension value id 4294484500 [recspec=`UPI:100224148']
I am using MDEX 6.4 and PS 6.1.3. The dimension value ids in question seem to be in the autogen_dimensions.xml, but the dgraph doesn't seem to recognize to know about them. Why?
Any further insight would be appreciated. "Just run a baseline" is not a good answer, I need to do partials every hour throughout the day.

Thanks for the input, everyone.
It looks like my issue was that my state file had a set of updated dimensions but my dgraph did not.
I had a baseline extract with properties X, Y and Z (let's say) and I was adding in new dimensions A and B. I moved my state files from my test environment to my production environment with entries on dimensions A and B. I started getting partial data for dimensions A and B and processing it. However, my dgraph knew nothing about A and B. So, although forge created the dim vals fine and the state files were modified appropriately, my dim val updates and adds on my dgraph failed because my dgraph had never processed a baseline extract with dimensions A and B.
Once I ran a baseline with dimensions A and B, partial updates went fine and have now processed dozens without issue.
Unfortunately, I only get baseline data once a week, so it took me a bit of time to realize what was going on.

Detecting UNKNOWN truth values using IIF or some other means

Hi,
I'm researching how to handle UNKNOWN truth value in my CHECK constraints, but I just want to know in general how to tell if an arbitrary boolean expression is TRUE, FALSE, or UNKNOWN, without having to specially rewrite the boolean condition to mean unknown.
The IIF() function returns the 2nd argument if the 1st argument is TRUE, and the 3rd argument if the 1st argument is FALSE or UNKNOWN. So the only way I can think of to specifically find the UNKNOWN ones is to try IIF() with <boolean_expression>
and NOT(<boolean_expression>). If it takes the 3rd argument both times, that means it's UNKNOWN.
Is there a better way
-- Returns 0
SELECT CASE WHEN NULLIF(IIF(1 < 2, 'T', 'F') + IIF(NOT(1 < 2), 'T', 'F'), 'FF') IS NULL THEN 1 ELSE 0 END IS_UNKNOWN
-- Returns 1
SELECT CASE WHEN NULLIF(IIF(NULL < 2, 'T', 'F') + IIF(NOT(NULL < 2), 'T', 'F'), 'FF') IS NULL THEN 1 ELSE 0 END IS_UNKNOWN
I'd want to replace an arbitrary boolean expression in the formula and just out if it is UNKNOWN.

this?
DECLARE @Param1 int=2
DECLARE @Param2 int = 2
SELECT IIF(@Param1 IS NULL OR @Param2 IS NULL,'Unknown',IIF(@Param1<@Param2,'True','False'))
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Unknown HZ value! (187) Assume 100.

Hi Hussein/Helios,
EBS 11i
RHEL 4.6
I am starting my apps process using adstrtal.sh , but I got errors like:
Executing service control script:
/u02/appldev/viscomn/admin/scripts/VIS_vision/adfrmctl.sh start
script returned:
You are running adfrmctl.sh version 115.34
Starting forms server for VIS on port 9000.
adfrmctl.sh: exiting with status 0
.end std out.
Unknown HZ value! (187) Assume 100.
.end err out.How do I resolve this please....
Thanks a lot
MsK

Hi again;
There are too many links avaliable if you do googling
http://www.bigismore.com/web-server-security/unknown-hz-value-assume-100-youve-been-hacked/
Also check:
http://www.google.com.tr/search?hl=tr&q=Unknown+HZ+value%2Blinux&aq=f&aqi=&aql=&oq=&gs_rfai=
Do you have linux support? If yes i suggest take support from linux, in some links ppl mention its a bug
Regard
Helios

SSRS : Reporting Services - Multi-Value Parameter Issue

Hi,
This problem is been around the blogs and forums for while now but may be it's not answered to the fullest. I couldn't get any satisfactory or completed solution on the issue so far, any clues/help will be highly appreciated.
My scenario is very simple :-
I am using SQL Server 2005 and SSRS. I need to develop a report which has a parameter value called Customer Name. The users should be able to select multiple customers from the list and sometimes Select All also. I tried the following :-
Created two data sets : Second dataset is just to populate the Customer Name
Created a Report Parameter and mapped with the query parameter where it says "Where CName in (@Parameter1)"
Nothing seems to be working although I tried to apply all the existing half-way solutions currently available in the forums. May be I am not getting to the right solution.
Here is what's happening :-
When used '?' like "where CName = ?" then it's working fine for the single value. {Multi value query cannot be used with ?}
But for multiple values when used @Parameter1 like "where CName in (@Parameter1)" it's giving the following error
Cannot add multi value query parameter '@Parameter1' for data set 'Dataset1' because it is not supported by the data extension.
However if commented this line it's pulling all the values whether or not selected from the parameter list.
This is the basic thing which I was not able to get the desired result, in addition I was looking to get the Customer Name parameter selected with a partial entry as we use LIKE. Example :- If the user enters 'St' in the text box the list should show all the names starting from those two letters
Starter
Steve
Steven
Stevenson etc.
I am not sure whether I'll will be able to get to this extent or not but until the multi value parameter, I am desperate to get the solution. So any sort of help/advise is highly appreciated.
Regards,

Hi,
This problem is been around the blogs and forums for while now but may be it's not answered to the fullest. I couldn't get any satisfactory or completed solution on the issue so far, any clues/help will be highly appreciated.
My scenario is very simple :-
I am using SQL Server 2005 and SSRS. I need to develop a report which has a parameter value called Customer Name. The users should be able to select multiple customers from the list and sometimes Select All also. I tried the following :-
Created two data sets : Second dataset is just to populate the Customer Name
Created a Report Parameter and mapped with the query parameter where it says "Where CName in (@Parameter1)"
Nothing seems to be working although I tried to apply all the existing half-way solutions currently available in the forums. May be I am not getting to the right solution.
Here is what's happening :-
When used '?' like "where CName = ?" then it's working fine for the single value. {Multi value query cannot be used with ?}
But for multiple values when used @Parameter1 like "where CName in (@Parameter1)" it's giving the following error
Cannot add multi value query parameter '@Parameter1' for data set 'Dataset1' because it is not supported by the data extension.
However if commented this line it's pulling all the values whether or not selected from the parameter list.
This is the basic thing which I was not able to get the desired result, in addition I was looking to get the Customer Name parameter selected with a partial entry as we use LIKE. Example :- If the user enters 'St' in the text box the list should show all the names starting from those two letters
Starter
Steve
Steven
Stevenson etc.
I am not sure whether I'll will be able to get to this extent or not but until the multi value parameter, I am desperate to get the solution. So any sort of help/advise is highly appreciated.
Regards,
you speak spanish

Data mart from two DSOs to one - Loosing values - Design issue

Dear BW experts,
I´m dealing with a design issue for which I would really appreciate any help and suggestions.
I will be as briefly as possible, and explain further based on the doubts , questions I received in order to make it easier go through this problem.
I have two standard DSOs (DSO #1 and #2) feeding a third DSO (DSO #3), also standard.
Each transformation DOES NOT include all fields, but only some of them.
One of the source DSO (let´s call it DSO #1) is uploaded with a datasource that allows reverse type of records (Record Mode = 'R'). Therefore some updates on DSO #1 comes with one entry with record mode 'R' and a 2nd entry with record mode = 'N' (new).
Both feeds are delta mode, and not the same entries are updated through each of them, but the entries that are updated can differ (means an specific entry (unique key values) could be update by one of the feeds, but no updates on the 2nd feed for that entry).
Issue we have: When a 'R' and 'N' entries happen in DSO #1 for any entry, that entry is also reversed and re created in the target DSO #3 (even being that not ALL fields are mapped in the transformation), and thefore we loose ALL the values that are exclusively updated through DSO #2, becoming blank.
I don´t know it we are missing something in our design, or how should we fix this issue we have.
Hope I was more or less clear with the description.
´d really appreciatted your feedback.
Thanks!!
Gustavo

Hi Gustavo
Two things I need to know.
1. Do you have any End Routine in your DSO? If yes, what is the setting under "Update behavior of End Routine Display"....Option available right side of Delete Button ater End Rouine.
2. Did you try with Full Load from DSO1 and DSO2 to DSO3? Do you face the same problem?
Regards
Anindya

Parameter Value passing issue to Web i report from Design Studio APP

Hi all,
I am trying to pass values to 2 parameters in a web I report called DIM1_REPORT and DIM2_REPORT. The values with space for example, Computer Sciences Corporation is getting passed as Computer\Sciences\Corporation Looks like the space is getting replaced with \ and as the values doesn't match the database values, no results are being retrieved. I tried using Convert.urlEncode function as well. But no luck still having same issue. Below is the URL,
"http://servername:8080/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=AWD5NloJ4rVKoi2Y8m89GY0"+
"&lsMDIM1_REPORT=" + GLOBAL_SCRIPTS_1.DIM1_FILTER_SCRIPT() +
"&lsMDIM2_REPORT=" + GLOBAL_SCRIPTS_1.DIM2_FILTER_SCRIPT()
Has any one faced this issue and have a solution for this? Appreciate any help on this
Thanks
Nithin

Hi Mustafa,
Thanks for the response.
I tried to replace the \ with %20 using the following code
Convert.replaceAll(GLOBAL_SCRIPTS_1.DIM1_FILTER_SCRIPT(), "\ ", "%20");
But getting error in the script editor saying
I think \ is causing this issue. If I use any other character other than \ in search expression its not throwing any error in script editor. Any idea is \ considered as delimiter/break in design studio?
Any other way to fix this issue in design studio?
Thanks,
Nithin

Multi value parameter issue.

We are facing some issue in SSRS report, whilst running SSRS report it shows as blank in the multi value parameter field when the <all> option is selected(character will be more than 20000). (Report server: MS windows server 2003 and 32 bit(GIRMSA3),
server: MS windows server 2008 and 64 bit)
Same is working in the SSRS Server and Citrix servers both are 32 bit , MS windows server 2003.
1. What is the Maximum Number of Values allowed in a SSRS 2008 Text Parameter Dropdown ? Is it configurable ?
2. What is the Maximum of Length of Select Values in a Text Parameter Dropdown in SSRS 2005 ? Is it configurable ?
Thanks
Vijay
Thanks Rai

Hi Vijay,
This is because of the following patch
“MS11-100 .Net Framework Security Update (KB 2656355)”. Applying this update limits the maximum number of form keys, files and JSON members to 1000 in a request.
Go to the reporting services installation folder.
Go to the report server folder and make a backup of the file “Web.config”. Once you have the backup, open the original file in notepad and add the following entry under the Configuration section:
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="30000"/>
</appSettings>
Go to the Report Manager folder and again make a backup of the file “Web.config”. Once you have the backup, open the original file in notepad and add the following entry under the appSettings tag:
< add key="aspnet:MaxHttpCollectionKeys" value="10000"/>
Once you do the above steps, you should be able to run the report without any issue.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Value Mapping Issue in SAP XI

Hello All,
We are currently having an issue with our Value Mapping in SAP XI.
We have set up Value Mappings in Integration Builder : Configuration and for some reason, some works and some doesn't work.
For example, we have set up Value Mapping Scheme called "DDelTerm" with two Agencies "R2" and "MarketPlace".
Then we set up a message mapping with DDelTerm Value Mapping function + custom logic to basically convert the value from R2 to value for MarketPlace.
However when we test this Value Mapping, some works and some doesn't work.
The following is the test results from two separate runs.
C000
Input:     <YYLIKON>C000</YYLIKON>
Output:     <ShipmentTermsIdentifier>COL</ShipmentTermsIdentifier>
Y000
Input:     <YYLIKON>Y000</YYLIKON>
Output:     <ShipmentTermsIdentifier>00</ShipmentTermsIdentifier>
Can you think of a reason why the lookup of Y000 fails, yet C000 succeeds? We checked for trailing spaces, etc, and there aren't any. And the table has been activated.
Note: the two leading characters of the value returned from the Value Mapping are stripped, hence COL. So for Y000, we were expecting to see PPD.
Is there any configuration step we are missing here?
Thanks in advance for your help,
Jay Ko

Hello,
What was the solution?

Form - Bad value (Goods Issue Form)

Hello,
I'm trying to fill Goods Issue form programatically. But when I try to fill some values into the matrix I got two errors-
Referenced work order does not exist.
Form - Bad Value
I can enter the same values by hand, it works without any problem.
One more thing. Let's say i got master data items with indexes 123, 1024. When I try to enter these values programmatically into Good Issue matrix (into index column) I got above messages. But when I the same with just value 1 it fills row with index 123.
What is happening?
Thanks in advance
Wydrzycki Kamil

hello freind
it may be due to refferd linked key mens primary key.pls cheak when yu insert data in database first cheak this entry may be linked with any primary key

Multi-values filter issue for QaaWS

Hi,
I've a matter with my Xcelsius Dashboard linked to a QaaWS.
I explain you in more datail:
I've created a QaaWS with a prompt that uses an "In List" operator (for example a prompt named State on State field). I'm been able to pass just one single value to the "State" Input Parameter of my QaaWS in an Xcelsius Dashboard, but not a multi-values. I've tried in vain to map more than one cell for the "State" Input Parameter (for example A1:A2 and pass California to A1 and Colorado to A2 : in this case the query returns values just for California)or to map just one cell and pass it a string like "California;Colorado" (in this case query doesn't return any values).
Has someone ever been incurred in this issue? Any suggest is very appreciated...
Best regards.

i've solved....
When i map my excel spreadsheet I can duplicate input parameter with the + button near "Input Values" into Web Service Component properties. I's a static solution but it works for my purpose.

Non-value plant issue?

Dear Experts:
I have set a non-value plant (Only control the quantity. When Define Attributes of Material Types, I only check Qty updating in the corresponding valuation area ).
I try to create PO and SO in the plant , but there are some error messages .
In PO, system wants me to assignment account. I try to account assign category U to create the PO , and there is still erro Unknown account assignment not defined for use here
Message no. ME069
In SO , system want me to input net value and pricing , but i have already maintain the selling price.
I want to know if I can create transaction in non-value plant (SO and PO ) and how to do them.
Thanks .
Gary

Hi
There is no scenario like non value plant.
In standard SAP there are 2 valuation levels 1) company code and 2) plant. SAP always recommends to set plant as a valuation level becoz the material valuation takes place at plant level.
In your case you have set qty update indicator at Material Type & plant combination it does not mean that you have set the non value plant. SAP has the standard material type as UNBW - Non valuated material which you can use it. But this is a consumable material and you have to maintain account assignment category like cost center in your PO.Acc *** category U is not allowed in std PO.
Hope you are clear now.
Thanks/Karthik

Weblogic Portal 10.3 CMS node property value update issue resolved

Hi Everybody,
issue resolved
Edited by: user1993265 on Aug 7, 2009 1:04 AM

set all the properties appropriately.
Even after setting those values also, it will give the same error in WL 10.3
In the build scripts, instead of having workspace = ${workspace}/workspace.xml, replace it as workspace = ${workspace} (for WL 10.3)
Its working for me.
Also, if the build.xml for ear application is generated through "workshop ant scripts", then u have to comment the code to cleanup archive.dir and archive. file.
Otherwise, the ear file will be generated and immediately deleted( you can see this in build log file)

Net Book Value calculation Issue Manual Legacy Data Transfer

Dear All
I want to Upload balance of old fixed Asset in newly configure System that are managed manually in previous year, I want to Post Their previous Current Written Down Value and Current Accumulated Depreciation when i go via IMG Create Legacy Data Transfer and enter,
Take Over Value of assets I entered for example
Accusation Value 100,000
Accumulated ordinary depreciation (Old depreciation in Previous Years) RS.10,000
Net book Value Rs.110,000
and system Calculate the Depreciation on 110,000 as WDV 10% that is 11,000
My requirement is that it will Calculate it as 100000-10000
Depreciation should be calculated at a 90000 @ 10% WDV that is 9000
Please suggest me, how i can do.
or other path or T.code where i can do.
i am new please explain in detail.
Regard
Khalid mahmood

Dear Atif and AP
Issue is not with Depreciation key it is working well according to my requirement but the issue is that base value that the system use is wrong.
i want that the system calculate depreciation at Cumulative Acquisition value (Purchase /capitalize/ cost price) less Accumulated Depreciation
is equals to Written Down Value.
I want that system use WDV as a base in each year after deducting year depreciation or (Acqusition cost - Accumulated depreciation).
I post a new asset and assign depreciation key it working well as required.
But i going to post Old asset for example Rs.100000 in year 2006. its Accumulated depreciation is suppose Rs.30000 in Year end 2011.
i want to post that asset in year 2012 as 100000-30000 and WDV IS Rs.70000 ;
i want that it will use 70000 as a base in the coming year to calculate depreciation.
My response is 100000+30000 and use 130000 as base to calculate the ordinary depreciation for the next year.
Now Please read the first thread again and guide me according to my scenario.
or tell me how i post the old asset value and their depreciation.
Regard
Khalid Mahmood

Unknown HZ value! - procps issue

Similar Messages

Maybe you are looking for