Update Operations in a process order

Hi,
My task is to update operational level information in a process order via standard function module, can any one help me by providing a function module or a method to update the operations in a process order.
Thanks in advance.
Kind Regards,
Abhi.

Hi Gabriel,
No, this function is not released to the customer.
You can check this by going to the Attributes screen of the function module.  The last field in the General data section shows the release date of a function if it has been released (you can see an example of a released function module by checking any of the BAPI_ function modules).
Cheers,
Brad

Similar Messages

  • After releasing the order same screen user updating the quantity in process order  in sap pp

    Hi experts,
    After releasing the order in the same screen user updating the quantity in process order  in sap pp.
    How to control it.
    can any help in this regards
    Thanking you,
    Rishit.

    Hi Rishit,
    You can control it by BAdi WORKORDER_UPDATE method AT_SAVE make error message if there is any change in quantity.
    Or you can create Transaction Variant through SHD0 for CO02 and make field Total Qty (CAUFVD-GAMNG) as output only.
    Regards,
    R.Brahmankar

  • Not to update Goods receipt on process order in LIMS system

    Dear all,
    I am working on SAP-LIMS interface project.
    Please help me out with the below requriement:
    Release of process order (COR1) in SAP creates lot creation in LIMS (creates an inspection lot in QIWL table which is read by LIMS system to download data from SAP to LIMS).
    When we do goods receipt (MB31) against the process order, currently it updates same inspection lot in QIWL table to send the same record for LIMS system again.
    We have a requirement not to update on Goods Receipt to LIMS system.
    Please let me know if there are any user-exits/BADIs for the same.
    I know that goods receipt MB31 runs the FM MB_POST_DOCUMENT in background.
    Please let me know if somebody has worked on this requirement.
    P.S. - We need the functionality of updating goods receipt on purchase order in LIMS.
    Thanks,
    Sachin

    Hi,
    If you post GR in Plant - A, then the stocks in the warehouse will reflect for Plant - A & not in Plant - B.
    Although the warehouse is the same, it is linked to the combination of Plant & Storage location. You can check the warehouse stocks using LS26, just specify the warehouse number & material number.
    But there is also a concept of planning plant & production plant, so Plant A can be where the planning takes place, while Plant B is where the actual production takes place. In this case, although you produce in Plant B, the GR will be done in Plant A.
    Hope the above clarifies.
    Regards,
    Vivek

  • Create default operation & phase in process order

    Dear PP Guru,
    We used PP-PI and have a production type for simple production that there is no recipee for them.
    We used auto generate order for this kind of production.
    But in order, only operation is created and no phase is generated.
    Hence this process order can not be confirm?
    Is there any solution for this??
    Best regards,
    Freddy Ha

    Dear,
    In transaction "OPJG" you need to maintain default values for creating operation in case the system is unable to find a suitable master recipe. You need to maintain this for Plant/Order type combination.
    Then define the confirmation parameter for this order type and plant for operation level confirmation.
    Please refer this link,
    Re: Creation of Process Order without assigning master recipe

  • System status LKD REL for operation & phases in Process order

    Hi Gurus,
    We have a process order in which system status for operations & phases is LKD REL due to which user is not able to confirm the process order. The status of process order is REL PRC APNG APRS BASC BCRQ GMPS MACM RESA SETC. One of the user from planning has set the status to LKD due to some artwork changes. Now another user set the status to unlock. Locked status from order status was reset but at operation & phases level the status is still LKD REL & hence order confirmation is not allowed.
    I try to again set the status to lock but i am getting message system status LKD is active (ACT 40547870 0010) which is similar to one which we get during order confirmation.Pls. suggest.
    Regards
    Amit 

    Hello Amit
    If the status LKD is not set for the order header, this is possibly an inconsistency.
    Please open an OSS incident to SAP for further analysis.
    BR
    Caetano

  • In process quality inspection in operation of a process order

    Hi,
    PP-PI inprocess quality inspection at operation level
    I am creating a process order having two operation. the first is quality inspection (inprocess inspection) & last is related to consumption of some materials.
    The control key in operations are pi02,pi03(miles stone confirmation). i am using insp type 03 in material master 
    user needs  insp. happen first then consumption of material.
    my question is
    1.when operation first get triggered  quality lot generated i enter RR & do UD.but here i can not see the insp lot stock as subscreen. why? then how can i block defect qty in block stock?
    2.how can i consume material in the same quality operation? 
    With Regards,
    Kareena

    Hi Kareena,
    I think the thread is going in other direction. You were asking for some solution to mentioned the consumption.............
    That can be taken care..........
    For 03 - "In process inspection" lot as yield confirmation by activating the STD function of SAP as I have mentioned in my last post.
    For 04 - "Inspection against GR form Production" lot, by stock posting.
    For any lot you can do customization in "EXIT_SAPLQEEM_011", to post the material consumption at each MIC/Operation valuation.
    But now the entire scenario what you are asking is bit confusing.
    You wrote
    I think for process order,
    quality activity confirmation we are talking
    & for this i have not maintained inspection
    point or inspection point identification.
    i am doing RR from qe11.
    It seems you we are talking about 03 type inspection lot. that you can relate with the option I have mentioned in the beginning of this reply.
    in my inspection plan for the material
    i have maintained 5 different characterstics
    in that row i can not see the sampling
    procedure,base unit of measure,
    base quantity all these field are gray in color
    i have defined sampling procedure also
    i have not maintained inspection point identification.
    Where you have mentioned these 5MICs?
    If it is inspection plan, then it will go with 04 Type.
    If it is Master Recipe/Routing, then it will go with 03 Type.
    Now the other point you wrote the MIC Line item have the fields GREY for Sampling Procedure,&...........&.......So to activate them,
    Select the line item for MIC, click on the Control Indicator (Sampling Procedure) and then you will be able to assign the Sampling Procedure to MIC.
    The fields "Inspect" & "Inspected" are related with the "Insp. Scope" with the MIC. The scope is define at the Control indicators for the MICs (On Page2 for the Indicators). There are four Radio Buttons to define the Inspection Scope.
    Scope not Fixed
    If you set this indicator, the number of inspected units is defined by the user for results recording.
    This number does not have to agree with the precalculated number of inspected units.
    E.g. If the the sample size for that particular MIC is not fixed ever and you will supposed to enter it at the time of RR you should define this indicator and the field will open for entry in QE11.
    Fixed Scope
    If you set this indicator, the number of inspected units must correspond
    to the precalculated number of units to be inspected for results
    recording.
    The system can perform a valuation for the inspection characteristic based on the number of nonconforming units or the number of defects in the sample.
    And the field will be GREY, non - modifiable.
    Similarly the larger and smaller scopes work.
    Best Regards,
    Shyamal

  • COOISPI: No display of operations/phases from process orders

    hi All,
    I'm using EHP$4and having this problem The List "Operations/Phases" does not show any output in the process order information system (Transaction COOISPI).,however i used to work on EHP3 and did'nt face this problem
    please advice
    Regards,
    Ahmed Sobhi

    Hi Ahmed,
    I think the SAP correction note 1460244 will solve your problem.
    Best regards,
    Marcelo

  • Change Resource(Operation Overview) in Process order

    I need a program or funciton module to change the resource in "operation overview" in Pocess order. BDC is not possible as we cannot select the line item as the count of line item in a page differs with the system screen size...
    Kindly help on this issue.

    Hi
    Check the following fun modules
    RPM_CHANGE_RESOURCE
    RPM_CHANGE_RESOURCE_DATA
    RPM_CHANGE_RESOURCE_LONG_TEXT
    RPM_CHANGE_RESOURCE_POOL
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • BAPI_PROCORD_CHANGE for process order operation level change

    Hi,
    Can any buddy tell me how to change operation dates in process order with following requirement:
    Process order scheduling type is 'Forward',
    1st step, read operation start dates 'Earliest Dates' and 'Latest Dates',
    2nd step, change operation 'Earliest Dates' and 'Latest Dates' directly, this step can't be done in foreground,
    Can use BAPI_PROCORD_CHANGE to update operation dates directly?
    Best Regards
    Amy

    Hi Amy
    BAPI_PROCORD_CHANGE cannot be used to change operations.
    According to note 1694267 you can use the remote-enabled function module CO_SE_PRODORD_CHANGE that is released by the customer to change the order header, sequences, operations and production resource/tool. See the detailed documentation for the function module.
    BR
    Caetano

  • Standard costing in Process order for external operation

    Hi SAP - PP gurus,
    Need your expert suggestion on the current scenario. We are having a sequence of operations in a process order. One specific operation is used to trigger subcontracting activity for completion of some services.
    while calculating the total planned & actual costs & variance costs for the process order as a whole , we are not getting the desired results.
    The  planned cost is not getting calculated or variance is not populated correctly. what might be the problem or is there any alternate solution to approaching this scenario.

    I do not have an 'expert' response for you - but I can share my experience and maybe both of us will learn the 'truth' before too long.
    In the external processing - indicator in the control key for a phase/operation in a recipe - when it is set, the system requires that either a Purchasing Information Record or an Outline Agreement # and Outline Agreement line item # be entered. If I enter a PIR, the data from the PIR is loaded into the external op fully. This results in a proper cost roll-up and proper processing.
    If I use an Outline Agreement + Item # - the system expects me to copy all this detailed information into the remaining General Data fields (that were populated automatically when I used the PIR). I don't have to enter anything except the OA + Item numbers. But if I do not enter a price - then I, like you, get less than acceptable pricing because this operation is NOT priced (I do get a warning - this leads me to believe that SAP will not be populating these fields - the warning is to remind ME to do it --- I want the system to do it since I am specifying the OA + item numbers).
    I have searched help and now have posted an OSS note for the answer to this: The PIR does what I want (it has to be created prior to application of course), but because External processing is merely a service and can't be specified by Material # and it only works per Material Group # - then I only have the chance to enter one price per Material Group - and that is insufficient in my situation (I have about 50 materials per each group and each item can have a different price). So I have to use OAs - and not having them able to trigger auto copying into the external op phase - this causes a lot of extra work and risk of data inaccuracy (mis-keying the price, etc.). There does not seem to be a fix - so I think the manual application in the ext op will be your recourse.
    Let me know if you have learned more.

  • Update Process Order Confirmations Back to SAP ECC

    Hi,
    Is there a document or step by step guide which explains how i can update  SAP EARP with process order confirmations from my shopfloor?  Below is the scenario i am looking for help in
    1. There is a SQL server table where the SHOP floor update the quantity manufactured against a Process order.
    2. I need to pick up that data from the SQL server table and update the ERP against that Process order.
    Can any one explain how this can be achieved.
    I checked the sample's and the templates in SDN but none of them actually show how to update any ERP?
    Please advice!!.
    Regards
    Suraj

    Check this one
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60ac6bb8-a684-2b10-208d-b90883004a5e
    https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/204a13d0-399d-2b10-ec84-9c254cd7efd4
    You use this component to enable the shop floor operators to record their production order and process order confirmations using a touch screen user interface. In SAP ERP Central Component (SAP ECC) operators must complete many steps to confirm orders. Instead, you can use this interface, on a touch screen to enter the production performance easily and effectively. You can also use this component to obtain operators' work lists and information on their current activities.
    Regards
    Ram Upadhyay

  • Table to find the phase number in process order operation

    Hello All,
    Is there a way to find the table for phase details which are assigned to operation in a process order.
    Regards,
    Rohit

    Hi Rohit samant,
    Go to Process order Change or Display mode ie Tcode : COR2 or COR3.
    Enter the process order no , click on "Operation Overview (F6)", Click on the Phase field on any one operation, Click "F1", the Performance Assistance Screen will be displayed, Click Technical Details, you can get all details, like programe Name, Status, Table Name, Fieldname & all Technical details.
    I hope the above information is as per your request, Hence Reward Points,
    Regards,
    Nayeem Ahamed

  • DLV status not updated in Process order

    Hi guys,
    I did GR and got goods receipt documents but system is not updating  DLV status  in process order.
    Actually i have by-product and co-products as components in order. I did posting of by-product from Confirmation screen COR6N and for co-products i did MB31 and goods movement doc. get generated. Qty. is also updated in order but NOT the dlv status.
    Pl.suggest

    Dear,
    This is System status and you cannnot maintain it manually once that Business Transaction(FULL Delivery) happens System will automatically sets that status.
    DLV status updated once Del completed tick is activated in order header, This tick will get uodated once you do GR for complete qty.
    You need to Final confirm (CNF) the Order to get the DLV Status.
    Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV.
    If you want to make it manually then goto co02, enter the order, goto goods receipt tab page and activate delivery completed tick and save...DLV is activated in the head as status.
    Please check in BS22-I0012
    Regards,
    R.Brahmankar

  • Want to Create batch in process order at a time of Operation release.

    HI,
    We are going to release operation one by one for process order. There are 4 operations in my process order. I want to create batch in process order header when i release first operation.
    Is there  way i can set the Production Scheduler Profile  to PREL to create batch at header level.
    Thanks in advance!

    Thanks for the Information,
    to my understanding, all the Operation controls are in Operation control key.
    There is No Batch creation functionlaity assiciated with Operation control key.
    Look for a user exit to create the Batch with the PREL of the Header or REL of the 1st operation.
    Regards
    Ratan

  • Creation of Process Order without assigning master recipe

    Hi,
    I want to create a process order without having default master recipe for the given material or default operation for the given order type. I want the user to select the master recipe manually in process order. We do not want to use production version also.
    We can define the default operation for the order type (OPJG) so that we can create a process order. I do not want a default operation in the process order but the user should select a valid master recipe. If we have default operation in the process order, it serves no purpose as it is never used anywhere.
    Is there any way we can achieve this?
    Regards,

    Hi,
    Please find the required details and conditions for creating process orders without master recipe.
    http://help.sap.com/saphelp_47x200/helpdata/en/89/a42cb3461e11d182b50000e829fbfe/frameset.htm
    Regards
    Kannan

Maybe you are looking for