Updating a dDocAccount for a content you didn't checked-in

Hello,
I have the RWD privileges on account A and account B.
Imagine a content (which I didn't checked_in initially) with
dDocAccount=A. I want to update this content with dDocAccount=B.
An error message appears telling that I can't update my content
because I am not the author.
Is there a way to pass through this problem ?
Best regards,

The only way you can change a piece of content's security when you're NOT the original author is to have Admin rights of the SOURCE account. If you do, then you can change it to are those you have Write access to. In your situation, you can only change the account of content you checked-in.
Keep in mind that with accounts, you'll also need to have rights to the security group. So since you need admin access, you'll need admin access to both the account (dDocAccount=B) and the security group (whatever it is).
This is all standard security of UCM and there's no way around it unless you have admin rights. So I'm afraid the only option you have is to request for further access (or plan to hack your way into the file system, which I wouldn't recommend :P)

Similar Messages

WRT54GS V7 resets when version update is required for PS3 content

Been having this problem for a while now. the router works fine most of the time. But when a game or firmware update is required for the PS3 and is attempting to dowload the router will cycle off and back on and the dowload can not be completed. This only happens when the version of something requires updateing. I can dowload PSN store content, game online w/ no problem it only happens when version updates are needed. Can anyone please help with this?

I will check on the firmware version tonight. I did see that in the configuration, but I am unsure how to upgrade it. It ask me to name a config file I don't know what to do there.
I can usually get the issue to resolve after repeated attempts at downloading. it seems to be a timing and specific type of action issue. It only occurs when the PS3 firmware needs updating or a new patch for a game comes out. I can download PSN content without problems. Patches will begin to download then the router cycles off/on and dowloading can not be competed. However with enough attempts the timing will be such that the router will cycle after accepting yes that informs of the patch, but before actual downloading begins. then i will get the 'Please wait...." screen that occurs prior to the screen with the download progress bar. When the route recconects it jumps to the progress screen and I can get the whole patch to download and install. It is just frustrating as takes several attempts to get it to time this way.
I see that people are experiencning similar issues with other Linksys routers. Was wondering if anyone knows what this only occurs with this particular function and with nothing else and how to fix.
P.S. thanks torque for the message, I will look into those products.

Problem with option: enable this distribution point for prestaged content

Hi, for past few days I have been focused on application deployment with SCCM 2012 R2 (I am learning SCCM 2012 R2 reading books, watching video trainings . . .). Having followed allong book Mastering System Center 2012 R2 Configuration Manager I also did
deployment of Microsoft Office 2013, Adobe Reader 11, Foxit Reader 4.2 and Notepad ++ to test collection containing one Windows 7 computer. In one of examples prestaged content file is created for Foxit Reader application. In order to do so, if I am
right, option Enable this distribution point for prestaged content
has to be checked on distribution point and I did that.
Problem is that I noticed deployment of any application to test collection failed every time - system waits for prestaged content file if this option is selected. Then I have to delete deployment of given application, application itself, deselect option
Enable this distribution point for prestaged content and create app, distribute it to DP and deploy to test collection - then everything works well.
To make things worse, having deselect option Enable this distribution point for prestaged content (I did it yesterday and I checked that several times) this morning I checked again and this option is selected again. What might be the cause
of this behaviour? I expected this option to be deselected - this is weird to say at least.

When you enable the option "Enable this distribution
point for prestaged content" on a DP, it causes newly created applications/packages to default to "Manually copy the content in this package to the distribution point"... This would then cause the deployments on the clients to remain
at 'waiting for content' - unless if you manually prestage the content, as this option requires it.
If you enable the option "Enable this distribution
point for prestaged content" on the DP, but want to automatically have CM distribute the content, then configure the app/package to do so,
before distributing the content: Distribution Settings tab > Prestaged distribution point settings > Automatically download content when packages are assign to distribution points.

How to package different content so that the same license can be used for all content.

1) If packaging all the content at the same time, use the same instance of DRMParameters every time you call MediaEncrypter.encryptContent(). All content packaged using the exact same DRMParameters object will be associated with the same license.
2) If packaging content at different times, but want to have all the content associated with the same license, you need to use V2KeyParameters.setContentEncryptionKey(). The first time you package a piece of content, you would use ContentEncryptionKey.generate() to generate a new key/license ID. To use the same key/license for later content, you need to store the info in ContentEncryptionKey, so you can pass in the same values later for the new content.

To package content at different times using the same license, you need to implement the following:
Call ContentEncryptionKey.generate to generate a new key and license ID.
On your V2KeyParameters, call setContentEncryptionKey and pass in the object generated in step 1.
Call MediaEncrypter.encryptContent and pass in the V2KeyParameters (via DRMParameters), as usual.
Store the contents of ContentEncryptionKey, so the same values can be used again later. The key, license ID, and packaging date should all be stored.
When you want to package additional content using this license, lookup the stored key, license ID, and packaging date and pass these into the ContentEncryptionKey constructor to create a ContentEncryptionKey instance.
On your V2KeyParameters, call setContentEncryptionKey and pass in the object generated in step 5.
Call MediaEncrypter.encryptContent and pass in the V2KeyParameters (via DRMParameters), as usual.
The media packaged in steps 3 and 7 should now be protected using the same license.

You Tube requires Flash update. Worked for laptop Windows 7 but not PC Windows Vista. Can you help?

You Tube said I needed latest Adobe Flash Player, so uninstalled old version and reinstalled latest version 11.6.602.171 on PC running Windows Vista Home Basic SP2 32-bit OS. My system says it's there, but it still won't work on You Tube - still get same message saying Ineed latest version.
Had same message on my Laptop running Windows 7 and it updated and works fine. I use Internet Explorer 9.
Detailed Problem Description: Problem with downloading latest Adobe Flash update and viewing YouTube. On PC running Windows Vista Home Basic SP2 32-bit OS, You Tube home page red banner at top said I needed to install latest Adobe Flash Player but even after installing, it does not work and will not play most videos in browser and shows black screen with message still asking to download latest version. Seems to be rather random as to which videos it will play and which ones it won't, although there may be some common link (see examples below). I thought it might have been HTML5 problem but I have successfully played HTML5 and Non-HTML videos through Adobe test site (Adobe Flash Player Help/Video Playback Issues) as well as Stage Videos. (Note: Had same You Tube messages when viewing on Laptop running Windows 7 but that updated without problem.)
Ran Adobe Uninstall. Closed all other programs before reinstalling direct from Adobe (rather than You Tube link). No change.
Ran all Adobe troubleshooting suggestions listed at http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9_.
Removed browsing data and deleted cache, checked that Internet Tools\Safety\Active X filtering was disabled (but in Internet Option\Security, Active X controls are enabled), disabled Hardware Acceleration, restarted computer but no change to You Tube viewing. Re-enabled, but no change. (WOULD LOVE ADVICE FOR FUTURE REFERENCE IF I SHOULD KEEP THIS ENABLED OR DISABLED.)
I have updated graphics drivers for NVIDIA GeForce 9400 GT- although had to do manually as NVIDIA auto system scan said "could not detect your GPU". Noted they said Windows Vista supports up to Direct X 10, but my system is running Direct X 11. Had optional update message for "nVidia Graphics Adapter WDDM1.1, Graphics Adapter WDDM 1.2, other Hardware NVIDIA GeForce 9400 GT" on both PC & laptop. Laptop downloaded fine. Tried to download on PC but was not successful. Error Code 80070103, possibly because system had already been updated? Current driver version 9.18.13.1407 - "Windows has determined that your current driver software is up to date".
Running Norton 360 but it did not block or indicate any problems with Flash Player download.
Problem URL: http://www.youtube.com/?utm_source=navclient (red banner at top of home page says I still need to download latest Adobe Flash).
Example of specific video that will not play: http://www.youtube.com/watch?v=384IUU43bfQ
Example of specific video that will not play: http://www.youtube.com/watch?v=YgMen4-PI74
Example of video that will play: http://www.youtube.com/watch?v=TGbrFmPBV0Y

Dear Chris,
Thanks for reply. I ran the recommened Adobe uninstall program so assumed it deleted whatever it should have, before installing new version. When it didn't work I followed instructions in Flash Player help page (screen shot below) which said to delete the Roaming App Data/Macromedia/Flash folder and Roaming App Data/Adobe/Flash folder, which I did.
Below are screen shots of C:\windows\system32\macromed\flash files as they currently stand. I have a fuzzy recollection that it was deleted at some point because I think I went searching for it during one troubleshooting session and it couldn't be found (but maybe I'm geting confused with the App Date folders?). Anyway I presume these current files are all post-reinstallation as the dates are all 5 or 6 March (did them before and after midnight). I'm on Australian time - not sure where you are. However, notice install.log date is 21/05/2010 and Flash Player Trust sub-folder is dated 6/09/2008.
When I right click on the screen of both videos that will and won't play, I just get a list of options starting at "Copy video URL" down to "About HTML5". So not sure what you mean when you say "For the videos that do play, when you right click on them what version of Flash Player is reported at the bottom of the context menu?" as I can't see any info like this. Do I click somewhere else?
If you are able to get the info you are after yourself, two videos that will work are:
http://www.youtube.com/watch?v=OLKlTN1JN7w and
http://www.youtube.com/watch?v=TGbrFmPBV0Y
Also, with hardware acceleration enabling or disabling, the only place I can find to do this is through the Adobe Flash Help page http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9_
and right clicking on the Flash Player info box, going into Settings and checking or unchecking the Enable box. Do you know if there is another setting in my actual computer where I can do this and or there's some other setting I need to change? There doesn't seem to be anything similar when I go through Conrol Panel - Flash Player.
5. Delete all Flash Player browsing data
a.. Click Start > Control Panel.
b.. Double-click Flash Player.
c.. In the Flash Player Setting Manager, click Advanced.
d.. Under Browsing Data and Settings, click Delete All.
6. Remove Flash Player cache
a.. On your computer, select Start > Run. (On Windows 7, click Start and type in Search Programs and Files.)
b.. Type %appdata%\Adobe and click OK.
c.. Delete the Flash Player folder.
d.. Repeat step 1 and type %appdata%\Macromedia.
e.. Delete the Flash Player folder.

Why doesn't my macbook pro let me update certain applications? It says "You have updates available for other accountsTo update this application, sign in to the account you used to purchase it.

Why doesn't my macbook pro let me update certain applications? It says "You have updates available for other accountsTo update this application, sign in to the account you used to purchase it.

it's also likely that you used two different apple IDs to purchase apps. if that's the case then you simply have to log out of your app store, and log into the other account to update the apps.
from experience it's not possible to syncronise purchased content from two different accounts. but you can always give Apple a call.

The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it. I only have 1 acc

The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it." Both apps came with my computer and as far as I know I only have one Apple account. Any thoughts? Thanks.
Karen

Thanks for you reply. I'm 99% positive that I'm using the user id and password that I used to set up my computer. That's why I'm stumped. I read the solution someone else suggested (type your user name without @gmail and create a new password. When I tried it, I was asked for my birthday. It didn't recognize it. I know I got my birthday correct. Oh well...
Karen

It will automatically connect to I Tune when I plugged in I phone or I pad mini. It didn't work since last month. I went to Apple shop ask for help but a Mr. told me you didn't support the Technic for windows, is that right?

Hi
My problem is I cannot connect my I Phone or I Pad Mini with my I Tune on HP note book. It was automatically connected but didn't work since last month. I went to Apple Store for asking help. A Mr. told me that you didn't provide help for Windows Is that right? How can I connect, Sync, and update my information?

Apple Stores won't directly support issues with your Windows PC, even if the issue is iTunes which you need to configure your iDevice.
For device connectivity issues see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, and TS4062: iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing.
tt2

Hi all - any idea how to download songs from an old AOL iTunes account - have updated to Apple ID which is fine for new songs but didn't realise this wouldn't include the old songs. Have a 1st gen ipod with the original purchases on if that helps

Hi all - any idea how to download songs from an old AOL iTunes account - have updated to Apple ID which is fine for new songs but didn't realise this wouldn't include the old songs. Have a 1st gen ipod with the original purchases on if that helps

....... is there a way for me to get my old music library (which was controlled by my dad's apple ID) onto my new mac, but from that point on, start using my own apple ID for purchases?........
Yes, once the content is in iTunes on your computer, just click it to play and authorise your computer to play it by entering your Dad's ID and password.
Log into your own account and start purchasing your own content which will then be added to the existing content.

Can you fix , the fact that If you leave the firefox update window open for a long period (say 20 minutes in the background), then close all other windowns, then choose to install, it uses this extra time to estimate the download?

Can you fix , the fact that If you leave the firefox UPDATE window open for a long period (say 20 minutes in the background), then close all other windows, then choose to download update, it uses this extra time to estimate the download? (Mine said, 12 Hours to start with, but took under 2 minutes!)
== This happened ==
Not sure how often
== When you install update to 3.6.4 (Possibly for every update?)

The download should happen in the background (before you get an update window). I wonder why that didn't happen for you...\
Did you manually check for updates?

Didn't update my Leopard for long, can I just use the latest update?

Hi guys, I'm not so long on Mac, so don't know the details, i work with music offline on my Leopard, and didn't update it for long, now wanna do it, can I just download the latest update or I should have all the previous ones, as my system now is 10.5.2?
Thank you

Hi Eustace, I believe that it should be possible to download a dmg on a Windows machine and then transfer it to a Mac and run it, although I must admit I've never done it--I have downloaded Windows installers on my Mac and transferred them to WindowsXP and Vista, and run them without a problem (although some sites make it difficult because they check your OS and send you to the downloader for the OS you are booted in--I seem to recall one where it simply would not ever let me download what I wanted). I wouldn't recommend this for the OP though--I really think the best bet is to have the Mac connected to the Internet and run Software Update, so that all the updates needed are available and get run. Once the first batch are run and the computer restarts, one would then run Software Update again to see if other updates then become available...something that happens quite often. The OP would have to know all the updates that are available and needed on the Mac beforehand, then find the stand-alone updaters for each one and download them, and still wouldn't find out what other ones might be needed after running the first batch.
Francine
Francine
Schwieder

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards.

Can someonoe please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra softw

Can someonee please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra software. My software other than that problem works fine.

Couldn't complete what request? Way more information please.
What operating system?

I keep getting notified I have an update available but when I try to update I get the following msg ,"You have updates available for other accounts". I only have one account with apple and purchased the software when I got my macbook in Aug 2012.

I keep getting notified I have an update available but when I try to update I get the following msg ,"You have updates available for other accounts To update this application, sign in to the account you used to purchase it.". I only have one account with apple and the software was preinstalled when I purchased my macbook in Aug 2012 with that account. Has anyone had this problem or know how to find out what account apple needs?

You log into the App store using the same Apple ID you used to set the computer up, verify that none of your apps are hidden and that they have all be accepted and then download and install the update
for help contact the App store support - link is on the right ot the App store window
LN

I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

Thank you for your valuable advice. I've solved the problem right now.
Thanks
2015-03-16 15:06 GMT+01:00 c.pfaffenbichler <[email protected]>:
I have Photoshop CS 5.5 version, but I've just changed my camera and
I can't open my raw files. I need for my new camera Photoshop CC and Camera
Raw 8.7 version. How can I do to update the old version? Thank you
created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7302535#7302535>

Updating a dDocAccount for a content you didn't checked-in

Similar Messages

Maybe you are looking for