Updating logs of output message of a delivery using custom program

Hi Experts,
I have a requirement where in i need to create processing logs for a output message type of a delivery using custom program. So basically for a delivey a output type will be triggered , furhter i will develop a custom program which i will run from se38 and update logs. I even need to update teh status of the output message type.
Any inputs on this would be very useful.
Thanks & Regards
Dipak,

many possible ways...
1. create a report which queries table NAST for required output type and run the report in background for every 2 mins or 5 mins.
2. you can write it in the driver program for the output message.

Similar Messages

Updating Q and P table of master data using ABAP program

Hi All
I have a requirement to update Q and P table(non key and non date fields) of master data using an ABAP program.
Is this something recommended?
Will there be any issues if I do that?
Thanks
Deepak

Thanks Vikram. Ok. My look up is on some other master data Q table and that is the reason why I asked about ABAP custom program.
Look like I will have to do the following approach.
Load the required supporting master data to BW.
Execute Attribute change run process for those master data objects.
Load the actual master data and look up on supporting master data.
Execute attribute change run process.
This process takes me long time and I am trying to reduce the overall execution time. let me know if you have some good suggestions.
Thanks
Deepak

Write SM37 log using custom program as copy of RSPROCESS type REQUDEL

Hi,
I have created a custom version of RSPROCESS program for deleting overlapping requests from a cube.
The program works well but during the execution it doesn't write the log in transaction SM37, but only in the SLG1.
I'd like to have the SM37 log.
In detail che function modules of RSPROCESS included in my custom program are:
RSSM_START_DELETE_STORNO
RSSM_PROCESS_REQUDEL
APPL_LOG_WRITE_HEADER
BAL_DB_LOGNUMBER_GET
APPL_LOG_WRITE_MESSAGES
APPL_LOG_WRITE_DB
Any idea?

No, I executed the program in a process chain step.
To be honest, the first part of the program is a custom of RSPROCESS variant DTP_LOAD.
This section works well and i can see the log in the SM37.
After loading is complete, the same programm executes the RSOPROCESS variant REQUDEL, but for this activity i don't see the log. If you execute the standard step of the chain for deleting overlapping request you can see the job log in the SM37, i 'd like to obtain the same result.

How can I send and receive a message from a queue using standalone program

Hi,
I want to write a standalone Java program which has to post a message to a queue and receive a message from a queue thats specified as a replyto queue.I want to have my application to be completely standalone without the need of a Application server.What all the Jars do I need to include in the application.My aim is to have the application standalone and portable so that the application runs on any machine that has a JRE.
Thanks in advance,
Prathima

Hi,
You can get quite simple standalone MQ Java programs from this site http://www.capitalware.biz/mq_code_java.html.
Also regarding the jars required for your application depends on the API being used. If you use MQI API few jars are required and if you decide to use JMS API you'll require few other jars. But you got to either install Websphere MQ Java Client, which will copy the jars to the respective location, or you can choose to copy the jars from some other machine manually.
Eventually, all the jars related to MQI and JMS API will reside under /usr/mqm/java/lib/ or /var/mqm/java/lib/ UNIX Environment. And in case of WINTEL, you should find the jars under C:\Program Files\IBM\WebSphere MQ\Java\lib.
Trust it clarifies...
Naren

Can i update from Snow leopard to Yosemite and still use old programs?

If I update from Snow leopard (10.6.8) to Yosemite will my old programs work? I'm referring to Freehand MX, Adobe Suite SC2, Microsoft office 2004. I cannot afford to replace ANY of them (I got a Mac when I was diagnosed with Dyslexia while at University so the University bought it all for me).
I have an external harddrive and was routinely backing up my computer however earlier this year it stopped working saying that there asn't enough room ( i though Time Machine deleted old copies?). I've not very tec savvy at all (and don't underatand how to wipe my external harddrive to start again nor how to set up or use time machine properly).
Please can someone help, explaining in plain English (pretend I'm 90 lol)

I have an external harddrive and was routinely backing up my computer however earlier this year it stopped working saying that there asn't enough room ( i though Time Machine deleted old copies?). I've not very tec savvy at all (and don't underatand how to wipe my external harddrive to start again nor how to set up or use time machine properly).
You are correct in saying Time Machine will delete old files off of the backend of the backup set. Why this is not happening with your Time machine drive I am not certain, but I have seen this error when, for whatever reason the boot drive was selected as the Time Machine drive
Open System Preferences > Time Machine and be sure the correct drive is selected, If not then change the selection to the correct drive.
STOP
Otherwise, since you say you are not very tech savvy I am assuming you do not have any third party volume repair utilities and since we do not know why your drive is full rather than deleting files off of the back of the set you want to take extra precautions to be as sure as possible the Time Machine drive is healthy. So I am going to recommend an extra step in the process. I am also assuming your Time Machine drive is attached to your Mac with either a USB or Firewire interface — this will not work for network drives.
Open Disk Utility — you will find it in /Applications/Utilities on your Mac hard drive
Select the Time Machine volume and click on the Erase tab
The format should be Mac OS Extended (Journaled)
You can change the name of the drive if you want
Click on the Security Options button and move the slider one notch to the right
Click on the Erase button — this will erase the drive and write zeros to every sector on the drive which should remap any bad sectors to the spare sectors on the drive but it will take some time, so don't get anxious.
Assuming there are no errors when Disk Utility completes close it
Open System Preferences > Time Machine and reselect the Time Machine drive.
You Mac will then start a new Time Machine backup set. This may take several hours depending on the speed of your Mac the speed of the connection to the Time Machine drive and the speed of the Time Machine drive itself.

Can't update software because a message appears that I have to log with the same Apple ID that was used to purchase them: iMovie, Garage Band

I can't update software because a message appears that I have to log with the same Apple ID that was used to purchase them: iMovie, Garage Band, iPhoto, but those apps came with OSX Lion.
How can I get the "original" Apple ID?

Support Downloads
http://support.apple.com/downloads/
Luckily, there is always more than one way to update software.

Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

Dear All
This question is related to a previous one posted in:
Post Goods Receipt for Inbound Delivery using WHSCON IDoc
We have a stock transport order (PO) for which we create an inbound delivery. The despatch advice (EANCOM D96A DESADV) is sent to our logistics partner who returns the same EDI message with the received quantities (goods receipt).
Using the inbound IDoc WMMBID02.WMMBXY I have successfully posted the goods receipt for the original PO. However, the message flow in the delivery is not updated. When we post the goods receipt (transaction MIGO) in dialog for the delivery we see the GR in the message flow.
I have used the following values with the segments of WMMBID02.WMMBXY (SAP release = 4.6c):
E1MBXYH:
Reference = <number of delivery>
Transaction code = 'MIGO'
E1MBXYI:
Movement type = '101'
Purchasing doc. = <number of PO>
Item = <Item no. in PO>
Movement ind. = 'B'
I am not sure about the correct movement indicator but failed when using a value different from 'B':
The movement indicator is derived from the transaction code.
Permitted values:
'' Goods movement w/o reference
'B' Goods movement for purchase order
'F' Goods movement for production order
'L' Goods movement for delivery note
'K' Goods movement for kanban requirement (WM - internal only)
'O' Subsequent adjustment of "material-provided" consumption
'W' Subsequent adjustment of proportion/product unit material
QUESTION: Does anybody know if and how inbound WMMBID02.WMMBXY can be used for both the goods receipt in the purchase order AND the message flow in the inbound delivery?
Regards
Uwe

Hello Everybody
My initial mapping of the WMMBXY IDoc proved to be correct.
For more details please refer to:
[Note 833603 - EDI: Goods receipt for stock transport order|https://service.sap.com/sap/support/notes/833603]
Regards
Uwe

Using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV

using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?

3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

How can I update vendor fax/phone/email for output message determination?

Hello all,
I have updated vendor master record with a new fax number. But the problem is, I am still getting the old fax number in Purchase order, output message.
Is there any other change I need to make the correct new fax number in PO out put message?
Earlier I was able to send PO correctly to the old fax number.
What are the steps to update vendor fax number so it can correctly populate in PO output message medium detrmination and sent out to correct fax number?
Regards

Hi,
Hope you have created the PO document after making the changes in the vendor master.
Also check your output condition records for the application EF in t.code - NACE, whether you have maintained the old fax number, since this will have precedence over the vendor master record data.
Thanks,

Print HU label from Outbound delivery using output determination

Hi,
We have a business requirement to print HU labels from outbound delivery. The steps followed are
1) User executes VL02N
2) User clicks on packing
3) Material is entered to pack. HU is automatically generated.
4) After saving the delivery, output message is triggered.
Output determination is as follows
1) An Z output type is created.
2) Form entry and smartform name is assigned to this output type
Issue:
The issue is when the output message is triggered and the code in the form entry is executed, the handling unit (from nast) is not yet committed in the database. Since it is not updated in the database table, we cannot get any handling unit data to be printed.
Any inputs on how to print HU labels using output determination from outbound delivery is appreciated.
Thanks,
Sandeep

Hi Surya,
Thanks for the reply. But, my question was how to print labels from VL02N when i pack a material on this delivery.
Regards,
Sandeep

I have two apple ID's, one with all my apps and one with only Mavericks. Will Mavericks update automatically if i'm not logged in to the apple ID I used to download it?

I have two apple ID's, one with all my apps and one with only Mavericks. Will Mavericks update automatically if i'm not logged in to the apple ID I used to download it?

Some things are mixed up here, seemingly...
I seem to have two Apple ID's attached to my e-mail.
An Apple ID is a valid email address, apparently. How can those be "attached to your email"... what email?
Facetime will not verify my e-mail address because it is associated with the other account.
This doesn't make sense. You can register multiple, even non-Apple-ID, email addresses and their aliases with FaceTime.
So, maybe you can explain your problem better - what you want and the steps you've taken and what you have so far. If something doesn't work, please tell the exact error message, too.

How to display the Output messages on LabVIEW

Hi,
I'm building a simple user interface on LabVIEW and I have the following question:
- TestStand has an Output Tab where I display some messages using Engine.OutputMessage; How can I do the same thing on my UI?
I've attached a printscreen of my TestStand sequence as an example of what I want do do on LabVIEW.
I apreciate all the help.
Thanks in advance.
Regards,
Daniel Coelho
Daniel Coelho
VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
Controlar - Electronica Industrial e Sistemas, Lda
Attachments:
TS PrintScreen.JPG ‏137 KB

Sorry, from your post in the LabVIEW board I did not understand that it was the Output message that you were looking for.
I thought you wanted the results from your test steps displayed on the user interface.
It is the “Output Panel” in the sequence editor that displays your output message, but I do not know if there is default Output panel activeX indicator for user interface that the TestStand engine would update automatically like it does the execution view.
Maybe someone else knows
As also pointed out, the UI messages is your other option.
The Output Message event number is 40
http://zone.ni.com/devzone/cda/epd/p/id/3879
UIMsg_OutputMessages–(Value: 40) TestStand sends this message at periodic intervals when it holds references to output messages that calls to the OutputMessage.Post method queue. TestStand transfers the queued messages to an OutputMessages collection attached to the UIMessage.ActiveXData property for this event. An application that processes output messages should copy the output message references from the collection in UIMessage.ActiveXData to its own private OutputMessages collection by passing its private collection to the OutputMessages.CopyMessagesToCollection method. An application calls the Engine.NewOutputMessages method to create a private OutputMessage collection. TestStand generates this event only if the Engine.OutputMessagesEnabled property is True. Because there can be more than one handler for this event, the application should not modify the OutputMessages collection the UIMessage.ActiveXData property holds.
Omar
Message Edited by OmarGator on 10-09-2008 10:12 AM

Error in Output message for PO

Hello,
While saving Purchase Orders I get a warning in message type NEU for the Fax transmission for two particular vendors.When I select the line and check on 'Processing log' button, I see a message in popup as "Error in OPEN_FORM for (purchase order number)".
Please help.
Thanks,
Amit G

Hi Amit,
I have found some information that may assist us in determining the cause of your issue.
The error ME142 can have different causes like missing authorizations or a terminated connection. Please check SAP NOTE 397691. This note states that is errors occur when purchasing documents are output, the system generates an error message in the log of the message overview.
However, error message ME142 'Error in OPEN_FORM for document &' contain only the information that an error occurred and not the error cause. With the attached source code, the error cause is also displayed in the error message (for example, missing authorizations, terminated connection and so on).
If you apply the note then this will provide more detailed
information behind the problem you are having. Please apply this SAP note and then you can go further.
Sanjeev

Partner function copied from PO to Outb.del. but output message not created

Hello Gurus,
As the copy of the partner function from the PO to the Outbound Delivery is not supported in standard, I have activated userexit_save_document_prepare (MV50AFZ1) where I can add the other partner roles out of the purchase order into table XVBPA (VN). Thanks to this exit, the partner function VN is correctly added in the Outbound Delivery.
My issue is the following this partner function should create an output message using the partner function VN but this one is not created during the Outbound delivery creation. But if I go to the VL02N and just save the Outbound delivery again (without change) now the output is correctly created and processed.
Does someone of you know the reason why the output message for partner VN is not triggered at the Delivery Creation but
after the manual save?
Kind regards
Chris

I have just explained this in Copy partner from PO to inbound delivery

User cannot receive External Send Output Message manually - ME22N

Hi Guru's
I have the following issue, once a User has saved the PO he wants to receive this PO to his email. He goes to "Messages" and selects Medium 5 "External Send" and in Partner he types his User ID in order to receive it.
He is not receiving any emails and the status in Further Data is "2 incorrectly processed". When he types another User ID, this User does receive the email. Is there anything else I need to configure to this User ID so he can received this Output Messages? He is the only User that cannot receive these Output Messages.
Regards

Problem Solved!!
I enter to table USR21 (Assign user name address key) and realized User ID did not exist. So I enter to table ADR6 (E-Mail Addresses) and noticed it was a totally different User. I enter to table LFA1 (Vendor Master) and there was information about this User.
This left me to one conclusion...This had nothing to do with the User ID
The Client in the past created Vendors (MK01) has "Buyers". So when the Buyer wanted to send any PO to his email he just went to "Messages" and selected Output Type "NEU" / Medium 5 "External send" / Partner "Vendor#" = Buyer.
I enter to MK02 and typed the Vendor# they gave him, in "General Data" check only "Address" and press ENTER, updated the email in the field and selected INT E-mail in "Standard Comm Mtd" and problem solved.
Thank you all for your help
Best Regards!!

Updating logs of output message of a delivery using custom program

Similar Messages

Maybe you are looking for