Upgrade from SAP PI 7.0 to PI 7.3

Hi Experts,
We are planning to upgrade our PI system frm 7.0 to 7.3. I saw so many documents in SDN but I am confused frm where to start.
Can anyone please provide the details like what are the things I need to consider before moving to PI 7.3 and what are the steps need to to install.
Thanks
Raju

Hello,
This guide may be helpful for you
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/7048c50a-9b49-2e10-3b8e-ec2e1b02e431
Regards,
Sarah

Similar Messages

Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s

Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
Bharathi

Dear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi

Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

Hi,
I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
If yes, could you forward some links so as to know how.
Thanks,
Fariha

hi,
>>>>Is that Possible..?
yes
>>>Wont there be any additional configuration needed ?
if you use IDOCs then you don't need anything special
Regards,
michal

How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

Hi Experts,
I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
GRC 10.0 only work on NW7.02,we now have NW7.01.
How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
Use EHPI tools or just spam/saint or any other way ?
current version:
SAP_ABA 701 0006 SAPKA70106
SAP_BASIS 701 0006 SAPKB70106
PI_BASIS 701 0006 SAPK-70106INPIBASIS
SAP_01 0006 BW SAPKW70106
Thanks!

HI,
Net wevaer 7.2 CE is totally different from Net weaver 7.01.
No relation i feel.kindly check the links.
http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
http://help.sap.com/content/documentation/netweaver/index.htm
OR
You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
*Regards,
Ajitabh

Upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5

Hi
We are doing upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5, can you please help in below points
1. How much time does it take to run SP5 upgrade service pack for servers and client tools. The server need to be upgraded only on weekend, is it possible to upgrade in 1.5 days?
2. The OS is Windows 2008 server. what should be the rollback plan in case of upgrade failure ? One of server uses VM image while Production server doesnt have any VM image.
3. If BO client tools are on SP3, can they still connect to BO server components on SP5 - (for interim period when servers are upgraded first)
Thanks
anu

Hi Anu,
1. The upgarde should be completed in 1.5 days for the server and client componenets depending upon the number of servers you have in the cluster . If you are planning for upgarde do it successfully first on TEST , DEV and then proceed with PROD servers
2. The roll back plan includes thebackup of the CMS database , the filestore directory and the complete installation folder . In case of any issue , you can the place the backup . If the servers are on the VM , it is always recommeded to have the snapshot of the images before the upgrade
3. Yes, they can connect to the SP3 servers , but always recommeded to upgarde and have servers and client tools on same patch .
Thanks,
Sneha

Depreciation Run Error while Upgrading from SAP 4.6C TO ECC6.0

Hi
We are upgrading from 4.6c to ECC 6.0. In ECC 6.0 we need to make the Number Range Interval as "Internal" and Batch Session tick to be removed from the Depreciation Document Type.
While executing depreciation run, it got terminated and I have done the above changes. After that I have restarted the Depreciation. I have got the following error Message.
Message(s) during check of document ERROR00001
Message no. AAPO511
S:/SAPDMC/LSMW_AUX_020:006 20
Message no. /SAPDMC/LSMW_AUX_020006
If any body aware solution, kindly reply to this message
Thanks
siva

Check this useful links
Key differences between SAP 4.6 - ECC 6.0
http://sap.ittoolbox.com/groups/technical-functional/sap-hr/difference-sap-ecc60-with-sap-r3-3161113
LE/WM functionality difference between 4.6c and ECC 6.0
differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

Impact of upgrade from SAP CRM Interaction Center 4.0 to 5.0 on Genesys CTI

Hi Friends,
I would like to know that what is the impact of upgrade from SAP CRM Interaction Center 4.0 to 5.0 on Genesys CTI software.
1) Will there be anything we need to change?
            for e.g.
                 a) Settings
                 b) Software
                 c) Hardware
2) What do we need to keep in mind when upgrading from SAP CRM Interaction Center 4.0 to 5.0?

Hello!
The biggest change you must face is related to Java. If you had CRM4.0 Java configuration, you must change your settings to the non-java configuration CRM5.0 has. Most of those changes are performed by the upgrade program, but you must activate services in transaction SCIF.
Your other concerns:
- Software: Most of the Genesys releases are compatible with both java and non java configurations. Anyway, I am sure Genesys has compatibility instructions.
- Hardware: No changes to my knowledge
<b>Hope it helps. Please, reward points if so</b>
Regards
Joaquin

Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

Dear all
we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
EHP_INCLUSION.log details
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100915210509
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DE'
4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399      Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
4 ETQ399             (not usable, different component
4 ETQ399 ... No matching package found.
Is this related to the current SAP_APPL support pack version ?.currently we have
SAPKH47031 SP 31 for SAP_APPL 4.70
Regards
Shahnas.S

> i have few questions regarding above
(Almost) all of your questions are answered in the note:
> 2.Do wee need to apply the above note for non-unicode upgrade
<...>
Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
<...>
> 3.Note 1330256 recomends to apply support pack or to apply the Note 1330256 ,but we can do it only at upgraded version.
Yes - it avoids dumping with the dump mentioned in the note
> 4.How to identify the matchcodes
<...>
You can use the program TWTOOL01 to determine the existence of matchcodes.
<...>
> 5.How to delete them
<...>
You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
<...>
> 6.Impact of deleteing matchcodes
None since they were replaces by search helps.
Markus

IM (Inventory material) is failing in ECC 6.0 upgrade from SAP R/3 4.7

Hello,
We are working on Technical upgrade project (SAP R/3 4.7 to ECC 6.0 EHP 6) for one of our Client.
when we are trying to create a purchase order (ME21N) in upgraded system (ECC 6.0), the field IM Material is failing to accept the internal material values from MATNR field. After entering the IM material, the value immediately got disappeared and it needs some workaround to get the material back in to the IM field along with MPN material.
It was working fine (accepting Internal material) in R/3 4.7, if we give a valid internal material, it immediately get copies to the field IM Material.
In case of ECC 6.0, it is completely failing.
Please suggest if you have come across any solution?
Regards
Rifaie

Hi Selvan,
Go through document in below thread,you will get more info on upgrade
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade%2520%2520SAP%2520ERP%25206.0%2520Upgrade
Faq's on SAP upgrade in below link,
SAP ERP 6.0 Upgrade
Thanks Regards,
Syfulla

We have to upgrade from SAP 4.0 version to ECC6.0(only EDI/IDOC effects)

Hi All,
We have to upgrde a system from SAP 4.0 version to ERP6.0, is there any difference in EDI and IDOC
tables or their types in ERP6.0 from the 4.0 version, which we have to also consider or not.
but if differences are there but SAP itself is taking care for that, then how the sap is taking care of that ..?
Regards,
Rohit Sharma
Edited by: rohit sharma on Jun 19, 2008 1:26 PM

I´m not sure what you mean by "old table to new table".
The general table structure is not changed, VBAK + VBAP are still there. They may have been extended by additional fields, depending on how your system is implemented. It´s also possible, that if you activate any business function after the upgrade, that tables will get appends.
The old IDOC structures working before the upgrade should work after the upgrade the same way since those structures are not touched.
Markus

Upgrade from SAP R/3 4.6C to SAP ECC 6.0

Dear All,
Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
I have already checked the SAP Marketplace (Product Availability Matrix) and found that SAP R/3 4.6C first needs to be upgraded to mySAP ERP 2004 (SAP ECC 5.0) and then from SAP ECC 5.0 to SAP ECC 6.0.
My first question is whether I am on the right track.
Secondly, I was going through various SAP Upgrade strategies and curious to know the difference between technical upgrade and functional upgrade.
Please correct me if I am wrong - technical upgrade is when you technically upgrading the SAP ECC release from 4.6C to 5.0 (that is, upgrading Operating System, Database and ECC).
Once it has been completed, business processes (functional modules) need to be remapped. The development needs to be reworked upon (Modification Adjustment). This is what is known as functional upgrade.
I would appreciate if someone throws some light on my understanding on this subject.
Regards.
Wolfgang.

> Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
Oh.. you're aware of the fact, that Oracle 8 as well as Solaris 8 is out of support?
I would do it like (if you need/want to stay on the same hardware):
- upgrade Oracle 8 (I hope your run 8.1.7.4) to Oracle 9.2.0.8
- upgrade Solaris 8 to Solaris 10
- upgrade Oracle 9.2.0.8 to Oracle 10.2.0.4 + latest interim patches
- use kernel 46D_EX2
- upgrade the 4.6c to ERP 6.0
Be aware, that, if you plan to use Java applications (such as the Enterprise Portal or other Netweaer related appliation), the ERP 6.0 must be converted to Unicode.
Markus

Regrding upgradation from sap r/3 4.6 to ECC 6.0

Hi Friends,
We want to upgrade from 4.6C to ECC6.0 .
Pls can any one suggest me which tool i have to use .
Possible pls send me some docs on this one.
Thanks & Regards,
Ramnaresh.P

hello,
u need to post in forums SAP Solutions » SAP ERP 6.0 Upgrade .this is not the forum to post,
For the info:
For the functional and technical changes, check out the release notes for SAP ERP 6.0 and SAP NetWeaver (AS ABAP usage type) on the help portal respectively. http://help.sap.com
You can also check out the SAP ERP solution browser on the SAP ERP upgrade page. http://service.sap.com/erp-upgrade.
http://solutionbrowser.erp.sap.fmpmedia.com/
Please refer to the following links -
https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7308da46-0d01-0010-30aa-b61527ba008c?rid=/library/uuid/9cfdd546-0d01-0010-6688-ba8ddc48edc9
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
http://www.sap.com/solutions/business-suite/erp/pdf/ERP_Upgrade_Guide.pdf
Reg,
Dhanya

Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

Hi,
We are planning upgrade from 4.6C to ECC6.0 .Is there a table in SAP which contains old and new transaction codes? or is there any easy way to find obselete transaction codes and new Tcodes.
I also want to know the new tables added and replaced tables .Any
help is appreciated.
thanks
Venkateswara Rao Yeleswaram

Hi
Try this link, which will give functionality enchancements between different versions of SAP.
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Ramakrishna

Getting error in upgrading from Sap 2005 to sap 8.8

Hi everyone,
I am upgrading my client from sap 2005 to sap 8.8.During the pre check wizard system is getting some error and creating the log file.The coming error is:
Test result: Not completed due to SBOErr -2004 in function CDagCheckUTBRecordInconsistence::DoCheck(), error text: Open user defined table   failed. # #     MID=-1     BOID=-1     BO=     UserID=     D:\SAP Setup\B18800P_19-10003894\Wizard\Upgrade.exe     Version=8.80.237     Area=     PID=4400     TID=4064     D:\depot\BUSMB_B1\8.8_REL\SBO\8.8_REL\Application\SolutionPatch\Component\Logger.cpp     105
25/02/2011 13:52:11:765625      UpgradeWizard     Note               I     Technical     End time: 20110225 1:52:11PM # #     MID=-1     BOID=-1     BO=     UserID=     D:\SAP Setup\B18800P_19-10003894\Wizard\Upgrade.exe     Version=8.80.237     Area=     PID=4400     TID=4064     D:\depot\BUSMB_B1\8.8_REL\SBO\8.8_REL\Application\SolutionPatch\Component\Logger.cpp     105
25/02/2011 13:52:11:765625      UpgradeWizard     Note               I     Technical     Test result: Error # #     MID=-1     BOID=-1     BO=     UserID=     D:\SAP Setup\B18800P_19-10003894\Wizard\Upgrade.exe     Version=8.80.237     Area=     PID=4400     TID=4064
I searched so much on this in the portal but still not able to find any solution..
Please help me out to fix this error..
Thanks
Ankit Garg.

Hi ANkit,
if it is showing error during pre check wizrad, it will be showing SAP note number in front of that error. check the note number details .
Thanks,
Neetu

Upgrade from SAP PI 7.0 to PI 7.3

Similar Messages

Maybe you are looking for