Upgrading version problem

Help...I remotely upgraded a client remotely to the latest version (3.1), but then needed to make this machine an administrator for when I traveled. The problem is now, that the latest ARD disks are 3.0 and I get the message "You are currently running a newer version....". So how do I load 3.0 ARD Administrator disks when the ARD client on the machine is 3.1? I sure hope the answer is not reformat the machine. Thanks in advance for any help.

Stop in your tracks, don’t bother to uninstall!
Had this problem with my X-Serve that does not have a graphics card so uninstalling was not an option for me so I came up with a little workaround….
The reason why ARD wont install is because there is already a newer version of the client installed, so all you have to do is;
• Insert your ARD CD
• Open in Finder
• Right click on the Remote Desktop.mpkg and show contents
• Navigate to contents/installers
• Drag the RemoteDesktopAdmin.pkg file onto the station and install
• Run Software Update
• Upgrade to 3.1 admin
Hope this makes life a little easier!
Merry Christmas
Olly
X-Serve G4, X-RAID Mac OS X (10.4.8) Macbook 2Ghz 1.5Ghz RAM

Similar Messages

Windows 7 HP desktop Adobe Reader 9.? will not download upgraded version. What is problem?

WINDOWS 7 HP DESKTOP RUNNING ADOBE READER 9. WILL NOT ALLOW UPGRADE VERSION TO DOWNLOAD. WHAT COULD PROBLEM BE HINDERING DOWNLOAD?

Uninstall the existing version Adobe reader 9 and download the altest version from : http://get.adobe.com/reader/?promoid=DINRS
Regards,
Ravi

When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck.

When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck. I think I may have hit Upgrade the first time. I really need this to be fixed ASAP. Thanks for your help.

Assuming iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

LR6 upgrade version installation problem.

I bought LR6 as an upgrade version . When installing extracts the files to start the installation program but when the progress bar reaches the end of the run , it all off. The installation process does not start on. What can I do? Widows 7 64bit

Hi Dariusz Szubiński,
It seem that there is some problem with the permissions, try the below mentioned steps.
1.
extract the file to local drive.
Try to install it.
2.
Enable hidden admin: Enable and Disable the Built-in Administrator Account (Standard 7 SP1)
Initiate the installation.
If you still not able to resolve it, you can also try to extract it on another machine and can take the package back to this machine.
Thanks,
Atul Saini

Upgrade version of Lightroom 6 problem. 64bit on a 32bit computer

Hey Adobe. I just bought the download version of Lightroom 6. Upgrade version. Now that I should install the update, i can't because I do not have a 64bit computer. There was not any information that it was only the 64bit version available. So what happen now? Money back or can I download the 32bit version of you? Regards Anders.

you need 64bit, System requirements
Return, cancel, or exchange an Adobe order

Photoshop CS2 Upgrade Installation Problems w/ Vista Problems

I recently purchased a new laptop w/ Windows Vista which I'm trying to install my copy of Photoshop CS2 onto. My Photoshop license is an upgrade license ... originally upgraded from Photoshop v4.0.
When installing an upgrade copy of PS CS2, it requires proof of your previous version in order to verify you're a legitimate upgrader. This works fine if you're upgrading from a version of Photoshop after 5.x ...you simply insert your CD and the installation continues. The installation process is less straight-forward for users like myself ... installing from an upgraded version prior to 5. I'm required to call Adobe ... and conduct a phone verification procedure where I give them a code displayed on the screen during installation and they give me a response code to type into the installation form.
I deauthorized my old laptop ... start the installation routine on my new laptop ... call Adobe w/ my verification code ... enter the response code (which is accepted) and complete the installation without any problems. My problem occurs when I go to run the software. The startup screen indicates that the software is still in "Tryout Mode", and the first window I'm presented with is the "Adobe Activation" window requesting my serial number. If I try to enter my CS2 serial number it is rejected with the message:
"You must enter a valid serial number before activating online or viewing activation options. Please check your serial number and re-enter it, or click the Purchase button to buy a copy of this product"
The thing is ... this IS a valid serial number. I've confirmed this with Adobe. (It's probably an upgrade serial number, which is why the software is rejecting it). I called Adobe and they're now telling me that I must enter a paid-support agreement in order to receive help installing my software. They claim their software is working correctly, and it must be a problem with my computer.
Has anybody experienced a problem like this? I refuse to pay more for something that worked fine on XP just to use it on Vista due to bugs in their installation and activation routine.

function(){return A.apply(null,[this].concat($A(arguments)))}
mthight wrote:
Have the bugs of using with Vista been fixed, or still not working? thanks,
I know this is an old problem, but surely there is an answer to fix the problem by now...
What problems? I used Photoshop CS2 with Vista with no problems (I still have it installed on a Vista system if you'd like me to check anything in particular). CS3 and CS4 worked well as well. Haven't tried CS5 on Vista as I have moved up to Windows 7, but I suspect it works just fine.
-Noel

How do i install cs5 upgrade version from cs2?

hi
unsure whether this new win8 machine is 32 bit or 64 bit
not sure if my upgrade from cs2 to cs5 purchase is 32 bit or 64 bit

Thank you John,
Very helpful. Unfortunately, when it came to the point that the install asked for the earlier version, it said it was not a valid upgrade version. In seeking an answer to this problem i went onto Adobe chat and was informed that
Laishram: I have checked and see that the serial number for the CS2 is not a valid upgrade path to the CS5 product.
Chris: hmmmm. everything i read is that the upgrade version was for cs2. i just purchased it because the computer i had died and i bought a new one. i knew that my upgrade to CS5 version wouldn't work without an earlier version so I bought CS2 on ebay just two weeks ago. what can i do?
Laishram: I am sorry CS2 is not a valid upgrade path to the CS5.
I couldn't get more info from Laishram as to WHY is wasn't a "valid upgrade path" and I don't know what "not a valid upgrade path" means but, i'm guessing that i did something wrong when purchasing CS2. I was told that i could use the upgrade version(of CS5) that i purchased (to upgrade FROM CS2 to CS5) to upgrade to CS 6. So I'll have to do that I reckon.
Chris

Macbook pro, windows 7 upgrade version, help needed

hello,
I'm trying to install windows 7 parallel onto my newly purchaced macbook pro (my 1st Apple). Problem is that I only have original full xp and original win 7 upgrade version. With no os on boot camp partition upgrading does not work "invalid product key". Trying to install xp with the help of boot camp assistant leads to xp intallation service hanging up "inspecting equipment..." No installation start taking place.
Any advice?

Hi,
have a read here http://www.winsupersite.com/article/windows-7/clean-install-windows-7-with-upgra de-media
Regards
Stefan

CS4 Upgrade Install Problem

I just bought and downloaded the CS4 upgrade to CS3 and when I extract eh install file, I get an error message that says there is a problem extracting the files, check for available spacwe and privilidges.
When trying to read the extracted .pdf files, Acrobat says that the files are corrupt or not .pdf. When I run the extracted setup file, it creates 2 files and stops with an error message that says " A problem occured when extracting some files. Check available space and write privledges".
I have re downloaded the upgrade 3 times and get the same results.
I even tried it on my other computer running XP Pro and get the same results....same error message and can no open the included .pdf files due to corruption or??
Any ideas??? will help!!!

Hi kfallsbob,
Whenever you install an ESD (downloadable version) of Adobe application, it first extracts the compressed (in CS4, it's .7Z) and the default location is "Desktop". So first thing, ensure you have enough free system on the system partition (generally C:). After that, ensure you have the latest version of Windows Installer and .net. If they are already installed, you may try to create a new user account with ADMIN rights and try to install there.
When installing an upgrade version, it first checks for a previous version and then proceeds with the installation. If you have a Disk for CS3, you need not to have the application installed on the machine for installing the upgrade version. You can simply insert the disk when promoted during the upgrade installation.
If nothing helps, you can perform a clean boot (using msconfig utility) and then try to install the upgrade. Remember to keep the FLEXNET service enabled.
Regards,
Tony

Service pack versioning problem

Can anyone help me solve service pack versioning problem please. This
problem may solve some of my other problems.
I am trying to check if my service pack has been installed properly or not.
I issue following command from command prompt:
C:\>java weblogic.Admin t3://localhost:7001 VERSION
I get the following error: "Failed to connect to t3://localhost:7001 due to:
[java.net.ConnectException: No server found at T3://localhost:7001]"
At this time, I have weblogic 5.1 installed with service pack 2 installed.
If I run server seems to be running, and connecting to my
database.Eventually I am planning to upgrade to SP6 and run with jdk1.3.
2nd problem: When I make JAVA_HOME= JDK1.3, wls does not run.

Thanks Mike, you are right. The server was not running while I was testing
service pack test.
And service pack is installed. Thanks
WLAS5.1 does not run once I change JAVA_HOME TO "C:\jdk1.3.0_02", that
where I have jdk1.3
I get following error message:"wlserver.exe has generated error and will be
closed by windows. You will need to restart the program."
John
"Mike Reiche" <[email protected]> wrote in message
news:3ac8fe17$[email protected]..
>
1) You WLAS does not seem to be listening on port 7001 of your
localhost. Is it listening on a different port? Running on a
different machine?
2) What error message do you get when trying to run WLAS with
JDK 1.3? WLAS does definitely run with JDK 1.3
Mike Reiche
"John" <[email protected]> wrote:
Can anyone help me solve service pack versioning problem please. This
problem may solve some of my other problems.
I am trying to check if my service pack has been installed properly or
not.
I issue following command from command prompt:
C:\>java weblogic.Admin t3://localhost:7001 VERSION
I get the following error: "Failed to connect to t3://localhost:7001
due to:
[java.net.ConnectException: No server found at T3://localhost:7001]"
At this time, I have weblogic 5.1 installed with service pack 2
installed.
If I run server seems to be running, and connecting to my
database.Eventually I am planning to upgrade to SP6 and run with jdk1.3.
2nd problem: When I make JAVA_HOME= JDK1.3, wls does not run.

Reloading an upgrade version on PC

I purchased an upgrade version of CS 3 for Windows from a previous Mac version CS 2. I still have the disks, will I have a problem reloading the CS 3 for Windows?

if you failed to deactivate your previous version, you might have an additional problem when installing on a different pc: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Can I transfer/sell an upgrade version

I've moved to CC and have CS5.5 UPGRADE VERSION for Mac in the box, that I had used previously. Is there any problem with selling that now that I've deactivated it from my system? I don't want the next user to have trouble.

There will be a problem if the person you sell/transfer it to does not have a qualifying older version that will allow them to use the upgrade version.
Here is some other info that might be helpful for you...
Reselling Adobe Software
http://helpx.adobe.com/x-productkb/policy-pricing/transfer-product-license.html

Used LR5 trial version, purchased upgrade version, but don't have previous serial number

Hi guys,
Seems I have misunderstood the purchase and after my trial version expired I decided to buy the upgrade version (thought it would be the one as I already had there software downloaded and used as trial). Now I have purchased the upgrade software, but obviously I do not have the previous licence code!
How can I get it to work and pay the difference only? Or do I have to contact Adobe, cancel the upgrade version, wait for the refund and order afterwards the full version?
Thanks
Patrick

I think you have answered your own question. We are all just users like yourself. It seems that some people are getting confused about the upgrade version. The first time you purchase Lightroom you have to pay the full price. The trial version is actually the full version, it just has a time limiter on it. The upgrade version depends on a serial number from a previous version (i.e. Lightroom 3, Lightroom 4, etc.) as well as the serial number from the upgrade version to be activated. So it appears that you will have to negotiate with Adobe customer support to resolve your problem.

Trouble installing Acrobat X Upgrade Version using Acrobat 7 standard

Hi forum,
some years ago I bought a Acrobat X Upgrade-Version for upgradeing my Version 7 standard. No problems installing that software that time.
Now I bought a new notebook and wish to install the software again on this new machine.
I installed the version X, using the key from the CD. Starting the program, I have to type in te key again. The software accepts the key, but wants to know the key of version 7. No problem, I thought, typing the version 7 key in the following field.
But now the software says that ist a wrong key?!?
So I can´t aktivate the software... :-(
Installing version 7 first and then version X causes the same problem.
Any help? What can I do?
Thank you very much in advance!
Werner

Hi Werner ,
Please connect with the customer support for the same.Here is the link .
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Regards
Sukrit Dhingra

What is the difference between a full and a upgrade version?

When I want to buy photoshop elements 8.0 i can select a full or upgrade version, the price is alsmost thesame.
normally you would think a upgrade is just a upgrade and you can't use it if you don't already have photoshop Elements installed.
but in many online stores they only sell the upgrade version.
so that makes me believe you can buy it even tho you don't have any photoshop elements on your pc.
so what is the difference?

The only difference between the Upgrade and Full version is of the pricing. I believe right now Adobe is already offering PSE at $79 so there is no Upgrade option appearing on the website (although I am not sure about unavailability, I just stating what one of the user on the forum says).
Legally, you should be a previous customer of PSE to buy an upgrade version and I am not sure but I believe when one go for buying the Upgrade version they do need to provide the serial number of the previous verison.(not sure though)
Regards,
Ankush

Upgrading version problem

Similar Messages

Maybe you are looking for