User mapping not available
Hi all,
I have installed EP SR1 . I am trying to map a system to a role. When i try to user mapping it asks for username ,pwd for the system.
When i enter it and save it ,its throwing the following error.
Any patches ?
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 02:31_12/07/05_0006_4483250
See the details for the exception ID in the log file
Regards
Bharathwaj
Hi,
User Mapping, we have to install encryption packages, if you are not concerned abt security, one work around is
goto System Config->UM Config-> Select Direct Editing Tab and change this valuefrom FALSE to TRUE.
#Use usermapping without strong cryptography (IAIK). It is strongly recommended to keep the default value (FALSE). Only change this setting, if you cannot install a cryptography provider due to import and export regulations. Then, if this property is set to TRUE, the usermapping information will not be encrypted.
(Type: Boolean, Default: 'FALSE')
ume.usermapping.unsecure=TRUE
You can refer to this link,
/community [original link is broken]
<b>I would recommend you to install the encryption packages.</b>
If it helps and works and if you are happy with the solution,reward points.
Thanks
Senthil
Similar Messages
-
User Mapping not fully available
Hi, each time i want to do a user mapping i have the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 09:43_09/11/04_0002_1358150
See the details for the exception ID in the log file
This is the message i have found at the server log:
#1.5#0008541F9918004D0000006E00000CF80003E872B1EAA51E#1100004239000#/System/Server#sap.com/irj#com.sap.portal.portal#Administrator#281####f126dea0324c11d98bd10008541f9918#PRT-Async 0##0#0#Error#1#com.sap.portal.portal#Java###Exception ID:09:43_09/11/04_0002_1358150
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component class : com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent
User : Administrator
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:376)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:389)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:408)
at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doContent(UserMappingAdminComponent.java:137)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 7 more
Caused by: com.sap.security.api.umap.UserMappingNotAvailableException: User Mapping not fully available.
at com.sap.security.core.umap.imp.UserMappingDataImp.storeLogonData(UserMappingDataImp.java:545)
at com.sapportals.portal.prt.component.usermanagement.UserMappingDataModel.saveLogonData(UserMappingDataModel.java:508)
at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminDataModel.saveLogonData(UserMappingAdminDataModel.java:179)
at com.sapportals.portal.prt.component.usermanagement.UserMappingComponent.doHandleHTMLBEventSave(UserMappingComponent.java:157)
at com.sapportals.portal.prt.component.usermanagement.UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:231)
... 11 more
I have redeployed com.sap.security.usermapping.par.sda but nothing happens.
Someone knows how to solve this problem?
ThanksHello Pablo,
Do you know where I can download the "SAP JAVA Cryptographic Toolkit"?
I've tried to download it from service.sap.com/download under-> "Download SAP Cryptographic Software" but it seems that it's not in there.
Thanks in advanced,
Kobi. -
User Mapping not fully Available Error
Hi
while connecting from EP to Sap R/3
created folder in System Administration and System object as Dedicated
system name: sapsystem - next - finish
selected propety category :Connector
AppHost : 101.110.110.105
Remote Host : 3
SAP Client : 800
SAP SYstem name : global
SAP SYstem ID : 00
SAP Server Port : 3200
System TYpe : SAP_R3
SAVE
Property Category : usermanagement
logon method - UIDPW
user mapping type - admin,user
SAVE
System alias as (sys1)
User Administration - UserMapping- search
Administrator in Users - start - edit-
System alias - sys1
user - sapuser i.e( R/3 server)
password - xyzabc
SAVE
then raising error Portal Runtime error
User Mapping not fully Available
with Exception id
Regards
RakeshHi,
First you must import sap crptographic toolkit from help.sap.com, following link: http://help.sap.com/saphelp_nw2004s/helpdata/en/04/d246215f1d4f588d1d9c49391acb01/frameset.htm
Here be careful to follow all the steps, have a look at the link and the subt topic deploying crptographic toolkit.
Onec you have done that, restart the portal and related services.
Now it is possible that you might face other new probles or exceptions.
In that case you might need to update your jce files etc.
Please refer to the sap note: 796540
in that case -
"User Mapping not fully available" error in EP6 SP9
Hi,
I am trying to set up a user mapping in EP6 SP9
I have created a system (usig the "Dedicated Application Server for R/3 System" template, not sure if that is correct but I didn't think it would matter),
and an alias and everything seems fine until I try and create the mapping itself
In the "User mapping" window I click edit of the user I want to map, that works
I then type in a username and password (and domain since I have added that property)
When I press "Save" I get the error below
Anyone know what might be wrong?
Vin
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 02:20_07/01/05_0006_31293550
See the details for the exception ID in the log fileHi Vincent,
I installed the SP9 preview yesterday and had exactly the same problem. However I think I found a solution. Try the following:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
Hope this works for you as well!!
Best regards,
Markus -
Is the "Display list of web app items submitted by a user" feature not available in the free trial? I can see it in the tutorials but its not available when I am logged in.
Its just named a little differently now. You should be able to add the module {module_webappscustomer} through the Modules toolbox in the web page editor window, as indicated below. Please note that webapps feature is available only for webCommerce sites. Read more about the available modules and its usage in detail here - http://kb.worldsecuresystems.com/134/bc_1345.html?bc-partner#main_Web_App_Modules
Thanks,
Vinayak -
Google maps Not available in UAE
Why google maps Not available in UAE?
We will not buy Iphone 5 if we cant get Google MapsTell Google. This is a Technical support forum for the iPhone. There is no one from Google here.
-
File System Repository - User Mapping not Working
Hi,
I tried to integrate a file system into KM. For doing so, I followed the guide located at [http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm].
The only problem is, tht the user mapping doesn't seem to work...
The portal is running on a UNIX system, whereas the file share to be integrated is running on a Windows 2003 Server.
Here are the single steps that I performed:
- Creation of a KM Windows System in the system landscape directory with the ID "MySystem". User Mapping is set to "User,Admin"
- Creation of a Windows System in the system landscpe of the KM with the ID "MySystem"
- Creation of a Network Path in KM with following settings:
jCIFS Protocol is activated; Network Path = "
My Server\My Share"; User = "My Windows Domain\My User" and the according password. The specified user has administration permissions on the server.
- Creation of a readonly File System Repository Manager with following settings:
Root-Directory = "
My Server\My Share", SecurityManager = W2kSecurityManager, ACL Manager Cache = ca_rsrc_acl, Windows Landscape System = "MySystem"
- Configuration of the W2KSecurityManager: I specified the DomainFile-setting as "/etc/companydomaincontrollers.txt"
and placed such a file in the KM with following setting: "My.Server.Domain=According IP Adress"
- In UME I carried out user mapping for index_service user and placed the above mentioned admin user into the user mapping.
Result: The indexing works fine, all fles are indexed. When I however try to carry out a user mapping for a "normal" portal user in the UME it doesn't work: The portal user has no access to the file system. (I used the same admin user for mapping... so it should work).
Any help is appreciated...
P.S. With portal super admin users I can however access the fle system repository, even without user mapping. But I think this is ok, because I read in one forum message that admin users have always access in general....>
Frank Friedrich wrote:
> Hi Clemens,
>
> so the good think is that indexing is working and you can navigate with your admin portal user through the file system repository. In this case the most configuration settings must be correct.
>
> I am not quite sure regarding your System objects with the ID "MySystem". Do you have as well define an Alias Name for this System Object with the same name "MySystem" ? As well upper and lower letters are important.
>
> Because the reference is all the time the Alias name and not the ID or Name of your System object.
>
> Best regards
> Frank
Hi Frank,
thanks for your reply.
I have as well definied an Alias Name with exactly the same id. So this gives us following:
System landscape directory: KM Windows System with id="MySystem" and Alias="MySystem"
KM System Landscape: Windows System with id="MySystem"
In the created file system repository manager I also set "MySystem" for the Windows Landscape System parameter.
So I think that this should be correct (I also considered upper- and lowercase letters).
Maybe the probem lies in specifying the domain names? When I applied user mapping I always additionally specified the Windows domain name of the users, which is correct I think.
In the security manager configuration for the domain controllers (-> [http://help.sap.com/saphelp_nw04s/helpdata/en/a9/c54e9e09448d46b73d154e93d5e995/content.htm]) I however mapped the network domain of the file share server to the according IP adress. Maybe this is wrong? -
Add User option not available.
Hi,
I’ve recently purchased a MacMini which uses Mac OS X Tiger.
I’m looking to add a new user but the ‘+’ button on the user information panel is not available (greyed out). The only account I have created is the one created for me during the first power on setup.
Does anyone have any ideas as to why this option is not available and how to make it available.
Thanks in advance.Most likely that you have 'locked' your account settings. Click on the locked padlock and enter your account password. Everything should work.
-
How can I reassign an iPad to a new user when the previous user is not available?
I am in IT for my company and we issue iPads to team members. When they separate we wipe the iPads and keep them available for reassignment.
I am trying to reassign one of the returned iPads to another user now. It is not allowing me to do so. I see on Apple's support site, there instructions for resolving this if the previous 'owner' is available, but I do not see steps for if they are not.
I will try calling Apple support as well... However, comments and suggestions you might respond with are appreciated.
ThanksiCloud: Activation Lock
http://support.apple.com/kb/PH13695
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Talk to Apple Support. A Senior Advisor could unlock the device as long as you are able to provide the device serial number and proof of purchase.
The direct number for Apple’s Support is (800) 694-7466
Streamlined email process for removing activation lock
AppleCare has announced a new process to assist institutions with returned devices which may be activated locked. For customers who experience this for the first time please call AppleCare at 800-800-2775 so that the process and needed documentation can be explained. After the initial call customers can email with the required documentation for all Activation Lock Removal requests.
Cheers, Tom -
Human Task in jDeveloper 11g users list not available
I have the problem, I defined SQL authenticator in wenlogic, and I want to do assignment at human task. But, human task only see jazn users, alhough I see the users defined in db at weblogic console
Caused By: ORABPEL-10509
User not found.
User "bpmuser1" is not found in configuration "jazn.com"
Check if the user exists in the repository specified by the configurations. Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
at oracle.tip.pc.services.identity.jps.JpsProvider.lookupUser(JpsProvider.java:795)
at oracle.tip.pc.services.identity.jps.AuthorizationServiceImpl.lookupUser(AuthorizationServiceImpl.java:223)
at oracle.tip.pc.services.identity.jps.IdentityServiceImpl.lookupUser(IdentityServiceImpl.java:171)
at oracle.bpel.services.workflow.verification.impl.VerificationService.lookupUser(VerificationService.java:3670)
at oracle.bpel.services.workflow.verification.impl.VerificationService.c
How do I make users from myrealm in WLS available to the worklist app?Hi ppssrr,
Check the providers are in "SUFFICIENT" mode,both, DefaultAutenticator as your own.
Other way:
If I remember correctly, you can use "External Routing", creating an allocation rule from an external supplier.
Then assign participant based on that rule as.
More info: Configuring Human Tasks - 11g Release 1 (11.1.1.7)
Greetings. -
Some user fonts not available in CS6 Classic InDesign, please help
I am using Adobe CS6 Classic on a MacPro computer operating on Yosemite 10.10.1
Three months ago, I brought over my personal collection of fonts from my retired computer. The collection includes 30 Letraset postscript fonts, which I purchased so long ago that the originals are on floppy disk.
Initially, FontBook would not install the fonts, but I was able to overcome that by purchasing FontXChange, a tool which enabled me to quickly and effortlessly convert the Postscript fonts to Open Type fonts.
Using FontBook I installed those fonts into the
users/(my home folder)/library/fonts folder.
Twenty-six of the 30 fonts immediately became available on the InDesign fonts drop-down list. The other 4 simply cannot be made to appear on the list. (This is strange, because those fonts do appear among the fonts available for MS Word.
I have been searching for a solution online and have not found anyone who is experiencing my exact problem.
I have tried moving the problem fonts into many different fonts folders, the most promising of which were:
•the user/(my homefolder)/library/application support/adobe/fonts folder.
•and the MacHD/library/fonts folder.
I’ve tried starting from scratch with the Postscript font, converting it again to otf, etc. in case somehow the font became corrupted in the conversion process.
Etc., etc.—Nothing works.
The problem fonts are: Bronx, Demian, Demian Bold, and Willow.
Can anyone out there help?
—BFStart with Font Management in OS X,
Advanced Typography with Mac OS X Tiger,
Extensis Font Management in OS X, and
Fonts & Mac OS X -
Some users are not available to send e-mails
Hi, I've got a Sun One messaging server 2004 Q2 installed on a solaris 9 (sparc). Everything works fine until I created two users, only those users have problems with sending e-mails outside the server and the most strange thing is that they do not receive any error but only some of their e-mails reach it's destination.
I've read the system log and it doesn't report abnormal activity.
I deleted the users from LDAP and created them again.
I've checked the users attributes from LDAP definition and nothing look to be abnormal.
Please help me.It's likely nothing to do with your server or the users.
We would need to see the mta logs showing the e-mails not reaching the destination to be able to help.
If you see the messages getting dequeued, that means that the messages indeed left your server, and any problem would be downstream from there. If you do not see them getting dequeued, then there may be an associated error message we could look at. -
Hi, all:
I'm trying to configure TrendMicro IOS content filtering. I have this working on a separate box, running 15.1.
On this particular testbed, I have a 2900 running:
System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T1.bin"
And the following licensing:
Technology Package License Information for Module:'c2900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc uck9 Permanent uck9
data datak9 Permanent datak9
Configuration register is 0x2102
CUBE_GOLD_MEX#show ip trm subscription status
Package Name: Security & Productivity (Trial)
Status: Active
Status Update Time: 18:02:51 CST Mon Jul 23 2012
Expiration-Date: Mon Aug 20 02:00:00 2012
Last Req Status: Processed response successfully
Last Req Sent Time: 18:02:51 CST Mon Jul 23 2012
CUBE_GOLD_MEX#
Also, I have the following config lines on it:
ip host trps.trendmicro.com 216.104.8.100
ip name-server 4.2.2.2
ip cef
multilink bundle-name authenticated
parameter-map type urlfpolicy trend tm-pmap
allow-mode on
[snip]
parameter-map type trend-global trend-glob-map
class-map type inspect match-all http-imap
match protocol http
class-map type urlfilter trend match-any drop-category
match url category Abortion
match url category Activist-Groups
match url category Adult-Mature-Content
match url reputation ADWARE
match url reputation DIALER
match url reputation DISEASE-VECTOR
match url reputation HACKING
match url reputation PASSWORD-CRACKING-APPLICATIONS
match url reputation PHISHING
match url reputation POTENTIALLY-MALICIOUS-SOFTWARE
match url reputation SPYWARE
match url reputation VIRUS-ACCOMPLICE
policy-map type inspect urlfilter trend-policy
class type urlfilter trend drop-category
I have not been able to get to the good part of configuring the ZBF.
I've looked over several configuration examples and can't figure out what I'm doing wrong, since I'm not able to see the command 'parameter-map' under the 'policy-map urlfiltering'
XXXXXX(config)#policy-map type inspect urlfilter trend-policy
XXXXXX(config-pmap)#?
Policy-map configuration commands:
class policy criteria
description Policy-Map description
exit Exit from policy-map configuration mode
no Negate or set default values of a command
XXXXXX(config-pmap)#
I thought it might be an issue with version 15.2.3, but according to configuration guides, commands are the same.
Can anyone provide some assistance?
TIA.
c.Hi Carlos,
I am having the same problem. I have seen a few diffenent configuration examples and they all show adding the "parameter type urlfpolicy trend parm-map-name" command but it doesn't exist, at least in 15.2(3)T1 and I see it listed in the the IOS documentation for 15.2. Maybe they forgot it :-)
I guess I will open a TAC case as I do not want to downgrade...
I will keep you posted if I find the answer.
Regards,
Troy -
Image Maps not available?
I have RH8 and noticed the html "image map" functionality does not work in a generated a Word document and/or a PDF document. Can someone confirm this is correct? I looked around for some kind of setting, but I can't find one.
Hi there
This would seem to make sense that Image Maps would fail to convert to a medium primarily intended for printing.
If you feel it should operate differently, please advise Adobe via the Wish Form. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks -
Current User Filter not available in the Add Web Parts list - Sharepoint 2007
Hi everybody,
I'm trying to build a copy (or auto-populate) function on a list.
I did all the coding changes, now I need to add a web part to my list called Current User Filter.
Problem is, the Current User Filter is not in the Web Part list at all!
How can I add it ? I looked in the Central Admin Panel and did not see anything.
Thanks in advance!What version of SharePoint are you using? I think that this is s MOSS webpart, so if you're using the WSS version of the product, you're probably out of luck.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.
Maybe you are looking for
-
CR XI Error message "package package name does not exist"
I am trying to use the Java API that is available for Crystal reports XI. I am using NetBeans v.5.5.1 for developing my Java code. The application does not seem to find the Crystal reports Java libraries, I cannot compile it successfully. For instanc
-
How to add leading zeros to kunnr field
Hi All, I need to add leading zeros to KUNNR field runtime. i.e for some customer it is displaying '2001084606' some customer's it si displaying '10434'. I want add leading zeros when customer length is not equal to ten '10'. plz kind let me know thi
-
PS4's official universal remote is heading to Europe
The PS4 is getting its first official universal remote. As spotted on Amazon and GameStop, peripheral developer PDP's universal remote is the first of its kind officially licensed by Sony. Priced at $29.99, it's slated for an autumn release in North
-
Cannot Connect iPhone 5 to iMac
Hello, I have spent the past hour reading up on common issues that can cause this I have turned off my firewall and forwarded port 7682. Both my devices are on the same network and have connected to each other in the past. Although the connection nev
-
.PAT file format?
Are there docs anywhere that describe the .PAT patterns file format? I'm trying to get to the pixels that are used for a pattern that are used in a "pattern overaly" effect. I don't think any of the Suites give this info. Thanks in advance :-)