User Status change problem in Process Order
Hi,
We are in process of upgrading our system from 4.6C to ECC 6.0. I have a problem with User status change for process Orders.
In 4.6C we are using the profile x with settings:
10 ZNEW Created process order 10 90 1 1 ZSTA
20 ZLCK Locked process order 20 90 1 1 ZREV
30 ZOPN Reopened process order 20 90 1 1 ZOPN
40 ZMST MES order started 20 90 1 1 ZMST
50 ZMCL MES order closed 20 90 1 1 ZMCL
90 ZTEC Technically completed 20 90 1 1 ZTEC
In ECC 6.0 we also use the same profile settings as above.
The problem is in ECC 6.0 when I do a goods receipt the User status changes to ZTEC . The process followed is ..Create process order, Release Order, Goods issue, Phase partuial confirmations, Goods receipt and then Finla confirmations of phases. Now in 4.6C if i do the above process the User status remains at ZMST and it only changes to ZTEC when i technically complete the order but in ECC 6.0 when I do a goods recipt from above steps the User status changes to ZTEC. THis should not happen.
Any pointers will be very helpful.
Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan
Similar Messages
-
Reg change in the status profile in the process order
Dear all,
By default one status profile ZPI0001 has been assigned to an order type ZP10 in a plant, the requirement is at the time of process order creation we want to change the status profile to ZPI0002 and create . this is applicable for one plant only
Please let me know the settings to be done for that
Thanks in advance
Regards
venkatHI Venkat,
I am not sure why do you need different status profile at the creation of process order...
First define the status profile ZPI0002 using Tcode BS01/BS02 and assign it to the order type ZP10 using CORN. The same order type is defined to plant using COR4..Here you can only have only one status profile for each order type, however, you can define different custom user status for the status profile..Say ZOCL - Order Completely closed after system status TECO to stop all goods movements...You can't have separate status profile while creating process order and at other stage of process order..Gurus please correct me if I am wrong..
Thanks
Sree... -
Custom exit or badi for changing the user fields in operation of process order
Hi all
I want to find a exit or badi to set default value to the user fields in operation of process order when COR1.
I have tried exit 'PPCO0001', but this exit is call after commit work, so I can not change any thing
I also tried to use badi 'workorder_update', 'before_update', but all parameters in this BADI are importing, can't be changed, I've tried to change it and then program dump.
Do you have any solution for this question?
ThanksDo a Implicit Enhancement at the PBO of this subscreen.
-
EXIT/ BADI/ Enhancement point for User Status change in Order
Hi all,
I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
Thanks and Regards,
SonalHi,
Use this Enhancement IWO10009 and call these function module to change the User Status
STATUS_TEXT_EDIT --> To Read the existing status.
STATUS_CHANGE_INTERN_VB --> to change the status.
Regards,
Satish -
I have Problem in Process Order ,
Dear , I have Problem in Process Order ,
See we have Numbe of process order , that status is REL CRCR DLV PRC CSER BCRQ BRRQ GMPS*
Now i want to Mass TECO all order , but i can not TECO because status should be CRFI ,
So
1) how can i change staus all order at once to CRFi?
2) Can i do the TECO in staus CRCR ?
3) Any other solution
REGARD
SAPHi,
It is NOT possible to do the process order TECO with the status CRCR , this has to be changed to CRFI
you can change the status to CRFI from CRCR in the following way
1) go to CO54 -T-code
enter the plant & Date range
enter the process message category PI_CRST ( sap std) or relevent category defined for you plant
select the to be sent option
2) here you will get list of process messages related to control recipes, click on the SEND (ctrlshiftF12)
process message will be processed & Control recipe status will be cahnged to CRFI for CRCR
Thanks,
Rajaniaknth -
How to generate a report from crm table to find out user status changes
Dear all,
Could you please help me on generating a report from SAP CRM table level
to find out user status changes in crm orders for a specific period of time?
Thanks in advance,
Regards,
ShaikHi Shaik.
You would not need to write report for this. You need to create a Table view mainenance for the CRMD_ORDERADM_H or CRMD_ORDERADM_I for whichever you need.
Follow the below or search on google for more on table view maintenance.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table maintenance generator.
In the table maintenance generator screen, you should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually you will create with one
step. You should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, you find display, Maintain options.
You can view the table contents by choosing Display and supplying the selection criteria of dates.
Regards
Apoorva -
Need help on to set User status for Operations in Maintenance order
Hi experts,
i am new to PM module.
i need to do BDC for IW31. i want to know some inforamtion
on user status for each opertaion.
my problem is ,, what is user status.
why it is saying order is not yet released when saving and status can not set.
in this cases how can i do BDC.User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
May be in your system user status are configured to set only after the release of the order.
For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm -
How to track what changes made in process order?
Hello Friends,
I want to find out the changes done in process order after its creation.Right now in administration tab in process order i can find the date , time and user name who made the last change.But even i want to see what changes that user made.So where can i find out this data?
Thanking you guys in advance.hi
chek this thread can be help full
https://forums.sdn.sap.com/click.jspa?searchID=20543061&messageID=6499254
-ashok -
After releasing the order same screen user updating the quantity in process order in sap pp
Hi experts,
After releasing the order in the same screen user updating the quantity in process order in sap pp.
How to control it.
can any help in this regards
Thanking you,
Rishit.Hi Rishit,
You can control it by BAdi WORKORDER_UPDATE method AT_SAVE make error message if there is any change in quantity.
Or you can create Transaction Variant through SHD0 for CO02 and make field Total Qty (CAUFVD-GAMNG) as output only.
Regards,
R.Brahmankar -
There is a requirement , the project will be created and then a user status will be changed in 5 steps as the project goes through approval process and at the end of the process the project will be released. I want to tract down the entire process of the user status change over time. How can I do that, creating change documents for status profile? But in one place I found that change document only created if system status is set to released? In my case system status will be set to release only after all the status change in user status happened.
Hello,
Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
SAP Solution Manager
-> Scenario-Specific Settings
-> Change Request Management
-> Extended Configuration
-> Change Request Management
-> Change Transaction
-> Change Transaction Types
o Define Status Attributes
Also activity "Make Settings for Change Transaction Types" in the same path is important.
Best regards,
Miguel Ariñ -
2LIS_11_VAITM delta with user status change (JEST, JCDS)
Hi,
I'm using standard datasource '2LIS_11_VAITM' for sales order delta, and I'm trying to add new fileds which is user status in 'Status' tab in sales order.
I thought it would be captured as delta if I change user status of sales order, but it's not captured as delta.
I'm trying to avoid using generic datasource with table 'JEST' or 'JCDS'.
Is there any way that user status change can be captured as delta?
Any help would be much appreciated.
Regards
BryanHi Bryn,
Normally when the status is updating is there flag is updating accordingly.If yes considered that field also for enhamncement then delts records will be picked for user status.
More details check with SD consulatnt they will provide the complete details.
Regards
Ram. -
Using change pointers for Process orders
Hi Experts,
We have a requirement where we need to send idocs when a process order is changed. Since process order data is a transactional data, can we still use change pointers?
We tried using the message type LOIPRO and it is giving an error saying that this message type cannot be sent with change pointers.
Can anyone guide me with the process and steps to get this done?
Thanks.For change pointer, you would have to deligate the business object with t.code SWO1. To handle it, it would take too much time to explaint.
If you use the BAdI, and call function in this way : " CALL FUNCTION 'FUNCTION_NAME' IN BACKGROUND TASK AS SEPARATE UNIT EXPORTING ....." the function would executed only after commit (when you call the funtion, it holds in a queue for commit. In roll back, it get disapeared).
User method in_update from the BAdI.
Edited by: Lior Tabib on Oct 19, 2010 4:18 PM
Edited by: Lior Tabib on Oct 22, 2010 7:27 PM -
Problem in process order creation.
Dear Sir/ Madam
i am facing a problem while process order creation.
the problem is:
Error when calculating cost for order ATFEDEC11 "see log Log is deleted when saving
Do you still want to save?"Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan -
User status change in inspection lot
sir,
when i am doing ud in qa11 that there is compulsary a USER STAUS must be QAA Aprroval by QA manager if user staus is QCNA not approvewd by QA manager then it gives error for user status changes must be compulsary.
so where we can change that user status of .I have a one option in qa02 is there any another options.
Please guide meDear Prakash
If you want to manualy change the status in QA11, you can change there itself. Near to the user status there is a change where you can change the user status ( Set status button - tick and change button)
Regards
Gajesh -
User Status automatically checked when a order is scheduled twice or more
Hello Friends
We created a User Status called "Rescheduled" for Work Orders
We want that the system flag this status automatically when a order is scheduled twice or more in CM33
Is that possible?
Edited by: Davison Tadeu Avigo on Jul 14, 2011 4:23 PMDavison Tadeu Avigo
Yes it would be possible, but you would need to develop a solution for this..
PeteA
Maybe you are looking for
-
Triggering Validation in a Region Through a Contextual Event
I am using JDeveloper 11.1.1.6.0. I am trying to find out how to trigger the built in validation that occurs normally when a "submit" action occurs, but have the submit action occur outside of a region, and the validation also occur in the region its
-
I also tried to install the latest DNG converter and that looks to have worked but not quite sure what's happened as I still can't open the files. Thanks in advance for any help.
-
Can't get 1.06.05 firmware to work with WRE54G v1
Tried everything twice...same result... steady red light on hardware and when I direct IP link to it....the Access Point MAC Adress description and field is missing and instead there is a line: link status ..... reverted back to 1.04.17 and hardware
-
Adding field to repository structure leads to syntax error in webservice
Hello there, I have added a field to a structure that is used as a parameter type in a customer function module which is part of a function group which is the endpoint of an enterprise service. I would have expected the webservice where this structur
-
Pricing data not geting picked in business orders
Hi All, I am facing an absurd issue related to pricing. I have maintained all settings for orders, pricing, sales area, item categories etc. Yet when i try to create an order and enter the product, the pricing does not get picked? I tried alot but do