Verizon Prepaid - questions about not paying on time

961
i'm a bit short on cash.
I have the verizon prepaid Unlimited plan on my Droid X2, which is unlimited text and data, which they don't offer anymore.
I'm a bit short on cash this month, and i know i can do without my phone for a week.
My payment of $95 is due on the 26th of each month, and i wont get paid til the 1st, which is a week later.
Will my phone still be able to be paid and activated again?
I've read something about I have 90 days to pay it to get it back on, and keep the same number.
Do they charge a reactivation fee type thing?
I've been a contract holder for about 6 years now with verizon, and finally got out of that, so i'm new to all this pre paid stuff.
thanks

You probally don't need this info anymore based on your post, but for anyone else who reads it, here the skinny
Even on the grandfathered prepaid monthly plans, you still have an expiration date based on your last largest payment, The plan you were on was $95 a month, so in your case, your last payment, last month, means you have 6 months of that account being active, and Verizon will not change your price plan without permission. So even if you didn't pay till Christmas, you would still have the number active with the grandfathered plan on it.

Similar Messages

Verizon Prepaid Questions - Different From AT&T?

I am currently a prepaid customer with AT. I'm also an avid forumer on their website, and I "specialize" in their prepaid offerings and services. I have had Verizon prepaid and postpaid services in the past, and I left due to the high prices and the limitability of their prepaid plans.
I used to have the $.99 daily access fee with $.20 per message. It got too expensive, but then I joined my Mom on her postpaid account. Just three months into it, it got too expensive; I then dropped my Verizon line and happily joined AT&T.
AT&T has very good priced prepaid options and plans - sort of unlike Verizon. Overall, I am happy with AT&T (prepaid), but sometimes I can't get very good coverage in the kitchen of my home... Which is kind of important, because the kitchen is where the heart is, am I right? I do get good 3G coverage upstairs, though, which makes me want to stay.
I use an AT&T prepaid Samsung Mythic, which I love, but it recently stopped working. I am looking to get it replaced soon. My Mom uses a Samsung Reality and gets two/three bars of 3G in our kitchen, while I get zero-two bars of EDGE. I may switch back to Verizon prepaid, under some certain conditions...
1.) Does Verizon offer SMARTPHONES on DAILY ACCESS PLANS? For instance, at AT&T, you can use ANY phone except the iPhone on a prepaid plan, and it is allowed. Can you do that with Verizon? I would like to use a Samsung Fascinate on the daily rate plan of $0.00 with $.25 per minute and $10 Unlimited Mobile-to-Mobile messaging with 250 messages for other-carriered customers.
2.) I use a plan at AT&T called the Simple Rate plan where I pay just $.10 a minute for all calls. Is Verizon's plan $.25 a minute PERIOD, or just to non-Verizon customers?
3.) If I were to switch back to Verizon prepaid, are there any activation charges? At AT&T, you can just register your AT&T prepaid SIM card, and begin using the service almost immediately with no activation fees.
4.) To add money to my AT&T prepaid account, I just simply buy $25 GoPhone cards and load them to my AT&T account. Then I add my messaging plan. Are there Verizon prepaid cards to purchase, and if so, are they easy to load onto the phone?
If I cannot use a Samsung Fascinate/other advanced device with the mentioned plan, I am staying with AT&T, despite the coverage issues in my kitchen. At least it will be affordable and "limitless"...
A reply would be appreciated. Verizon's business depends on it.
Thanks.

There are two daily prepaid plans -- 99 cents per day only on the days you make a call or answer a call, verizon to verizon is no extra charge, landlines or non verizon is 10 per minute after you have paid the 99 cents. The text is 10 cents to send and 10 cents to receive. The second plan is 1.99 per day only on the days you use it, This plan after paying the 1.99 is unlimited calling all to all providers. Text is 2 cents to send and 2 cents to receive if you do not have a text package plan.
Refill Expiration (once applied to the account)
$15-$29.99 expires in 30 days
$75-$99.99 expires in 180 days $30-$74.99 expires in 90 days
$100 or more expires in ONE YEAR!
NEW! Messaging Bundles Available
$20/month for Unlimited Messaging to anyone on any network in the U.S.*
$10/month for Unlimited Mobile to Mobile Messaging with Verizon Wireless customers PLUS 250 additional messages*
PREPAID PHONES
LG
6015i -- KIYOCERA --KWC 2325, KX414 -- MOTOROLA -- MotoW755, RazrV3m, V376, W385 -- PANTECH -- Jest -- Verizon -- Blitz, CDM7075, CDM8615, M7076, PN215 -- Almost any feature phone can be changed into a prepaid but you would have to pay full price for the phone.
Most Verizon Wireless phones will work with our prepaid plans
Non Prepaid Phones
1)Push to Talk, PDAs/Smartphones, advance data devices (BlackBerry, PalmOne Treo, etc.)
2)PC Card devices and handsets with HTML Web browser such as the LG Dare, LG Voyager, Samsung Glyde, Samsung Omnia and Motorola Krave
3)All Dashboard-capable devices like the LG Chocolate 3, LG VX 8360, Motorola Rapture VU30, Nokia 7205 Intrigue and Samsung Renown SCH-u810
*features such as V CAST video, Mobile TV, and Chaperone services are not available for prepaid service:. The only phones that are not compatible with our service are Push to Talk, PDAs/Smartphones, advance data devices (BlackBerry, PalmOne Treo, etc.), PC Card devices and handsets with HTML Web browser such as the LG Dare, LG Voyager, Samsung Glyde, Samsung Omnia and Motorola Krave and all Dashboard-capable devices like the LG Chocolate 3, LG VX 8360, Motorola Rapture VU30, Nokia 7205 Intrigue and Samsung Renown SCH-u810. Keep in mind features such as V CAST video, Mobile TV, and Chaperone services are not available for prepaid service."-- Accolade, Chocolate, Cosmo, VX3200, VX3450, VX5200, VX 5400, VX5500, VX6100, VX7000, ENV --SAMSUNG--Alias SCHu740, Gusto, Haven , Intensity, Juke, SCHA650, SCHA870, SCHU340, CHU410, SCHU430, SCHU540, Smooth --NOKIA -- 2128i, 2366i, 2650 Mirage, 2705 Shade

Basic questions about Notes domino connector

Hi,
I have a very basic question about the Lotus Domino connector for OIM. We have a requirement to provision accounts into the domino mail server and while doing that also update some information directly into a separate nsf file.
I checked the documentation and it seems while configuring an IT resource, we need to give the Mail DB path, and thats the only place where it refers to it.
Could you guys please let me know if this can be done? Can I write directly to a different nsf file, which is not like provisioning to the complete mail server. So the other attributes in the IT resource may not be able to be set up as its just the file I need to provision into.
Looking forward to your response.
Thanks, M

Hello folks, please share your experience working with the lotus notes connector.
Thanks, M

Questions about "Restore System From Time Machine"

Looking to fix an apparent system corruption problem on my work machine, I discovered the "Utilities > Restore System From Time Machine" option of the Leopard installation disc. I have some questions that are not answered in http://support.apple.com/kb/HT1177:
1. Does this option erase the hard drive and install a fresh system from DVD, or do I need to do that in a separate step?
2. What about software updates - when are they applied?
3. Will third-party system extensions be reinstalled OK?
4. I tried launching the process on my home machine, just to see how it works. At work I have a dedicated disk for Time Machine, but at home I have a Time Capsule, serving two Macs via Ethernet. I've also configured the TC to give us a shared volume; so in normal operation I have two network volumes, <Username>, containing Time Machine's sparsebundle file for that user's Mac, and "Shared". When I boot from the installation DVD and run "Utilities > Restore System From Time Machine", the backup volume list only shows the "Shared" volume. If I select it, I'm prompted for my TC username and password; I enter it, TC spins up, and then nothing. I cannot continue the restoration process, and reselecting the "Shared" volume does nothing. ???
Thanks in advance for your help.
-- Phil

For the record, here's what I've found out so far:
1. The "Restore System From Time Machine" option seems to want to restore everything, including the system, from the Time Machine backup. I wanted a clean system install, so I did an "Erase & install" followed by a "Restore from Time Machine" in the Migration Assistant. That got me most, but not all, of my settings back; exceptions include the printer configurations, the desktop picture, and the Dock settings.
2. Software updates can be applied after the new system is rebooted.
3. Most 3rd party extensions seem to have been restored OK, but some (like MacFuse) were not.
4. I'd still be grateful for any hints concerning how to get "Restore from Time Machine" to work with a Time Capsule.
-- Phil

Getting a new macbook, questions about transferring files with Time Machine

I now plan to switch computers to one of the new Macbook pros. Since I now use Time Machine, I'm planning to just upload the backup to the new computer when I get it. the backups are able to be transferred to a new one for an upgrade right?
Also, I had to switch hard drives once about 2 years ago, and when I did, the backup DVD I made for my iTunes didn't remember which of my ~2000 songs are checked and which aren't, leaving me to have to do it manually over the course of a few weeks. Will Time Machine do this for me?
I'm also running Leopard atm, will there be any problems uploading all the info since the new computer will be running Snow Leopard, and the backup was made through Leopard?

falkner09 wrote:
I now plan to switch computers to one of the new Macbook pros. Since I now use Time Machine, I'm planning to just upload the backup to the new computer when I get it. the backups are able to be transferred to a new one for an upgrade right?
Not via a full system restore. You want to use +Setup Assistant+ when the new Mac first starts up. You can transfer directly from the old Mac, or it's backups. See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of the +Snow Leopard > Installation and Setup+ forum).
Firewire from the old Mac will be fastest, by far. If you use your network, connect via Ethernet cable; wireless will take an eternity.
Also, I had to switch hard drives once about 2 years ago, and when I did, the backup DVD I made for my iTunes didn't remember which of my ~2000 songs are checked and which aren't, leaving me to have to do it manually over the course of a few weeks. Will Time Machine do this for me?
It should.
I'm also running Leopard atm, will there be any problems uploading all the info since the new computer will be running Snow Leopard, and the backup was made through Leopard?
That's what +Setup Assistant+ is all about; it transfers everything except the old version of OSX.

Equium M50-164: Question about Fan usage & battery timer

Hi !!
Just got hold of my equium m50-164 laptop today and I wanted to clarify a few issues
firstly,
I flashed my bios with the latest version and upon the reboot the fan kicked in at full power and didn't turn off until i put the laptop into standby mode, this seemed to of rectified the problem but the fan seems to be kicking in a lot more than compared to before, luckily the fan isn't kicking into 100% speed but more like 15% - 20% every 30 secs or a minute then goes into silent mode, the fan hasn't hit 100% unless i do a reboot :),
I know the fan will speed faster based on the cpu usage etc (thermal) but is this normal? I spoke to support and they wanted me to have an instant replacement but I said I would wait a few days to see if it would calm down :)
and finally looking at the power meter and other software tools there seems to be no battery calibration, with previous laptops i noticed that numerical calculations are made based on battery usage and time left [i.e a timer] but with this laptop i kind find a timer - i would of thought tha every laptop has this facility nowadays !
any advice would be helpful
cheers
Ephid0r UK

Hi
Please dont be mad on me but I really dont understood why your first step is BIOS update. The unit is delivered with actual BIOS and it is really not necessary to make it before you notice some problems. I just hope that you have enough experience with it because I have read a few postings on this forum about BIOS damage while BIOS update and to make it good again costs a lot of money.
Your BIOS is updated and there are new values that should be used by Power saver utility (responsible for cooling fan monitoring). I recommend you to remove preinstalled power saver, restart the unit and install it again. I hope that the result will be better.
Battery calibration I dont know what you want exactly but the battery usage can be control by power saver tool. On the task bar there is symbol for power saver and if you move the mouse pointer on it the battery capacity and left time will be shown.

Questions about Notes and To Do's in Mail 3.0

Overall I like the new features in Mail 3.0, but I'm having a difficult time sorting through how a couple of things work.
I believe I have sorted out how to sync the notes across my macs (using .mac), though it seems like my sync settings on the two machines (iMac and MacBook) keep changing themselves.
What I'm frustrated with is that, when I select text and make it a "to do" the only calendar option it gives me is "Calendar", which is a new addition under the "[email protected]" it seems to have made all by itself. It will not allow me to add the to do to any of my multiple local calendars (listed in Mail under the "on my mac" heading), which I sync across the two machines. iCal will also not allow me to move any of my local calendars to the "[email protected]" heading.
I want to be able to put the todo's under my existing calendars, not develop a whole array of new ones.
Anyone else seen or heard of this?
Thanks

In the preferences menu, under "composing" There is an option for "Create Notes & To Do's in:" With the options being "On My Mac" and "[email protected]".
I did not have this set properly, and changing it meant that selecting text in a note and making a to do gave me the option of putting it in my local calendars.
However, when I select text from an e-mail it still puts it in my "[email protected]" calendar.
Partial fix --> Still not exactly what I want to see.

Question about Note 886102 - Empty the delta queue of the connected SAP source systems

Dear expert
I'm doing the system refresh from ECC PRD to QAS using the hot backup of PRD
Before i start the database restore i was told to do the following step since this ECC has connection with one BW system
-----------------------Step -----------------------------
2.17 SAP note 886102 scenario C3
Empty the delta queue for all of the connected BW systems.
Execute all delta info packages two times on BW side, to clean up the delta queue in the source system. This is needed, because BDLS cannot rename the still available LUW-s in the qRFC queue.
----------------------Step-----------------------
But unfortunately i missed to execute this step
And the Q11 is now retoreing the backup of the database
My quesion
1. what will be bad consequence due to not execute this step? any way to makeup this error?
Best regards,

Hi Kate,
The probably issue which I could forsee is data getting wrongly updated into production if RFC connection from ECC to BW is not stopped.
Solution here could be to disable or deletethe RFC connections between ECC and BW before starting the SAP system at database level.
delete from sapr3.rfcdes where rfcdest = '<name>';
Once the system is up and running you can recreate them if required.
Also before starting SAP set the number of batch processes to 0 on the profile at OS level so that any released jobs don't start as soon as SAP is up.
Once the SAP system is up execute BDLS and change the logical system name.
Hope this helps.
Regards,
Deepak Kori

Question about while loop using Timer?

I am trying to use a while loop to read data from oscilloscope through
GPIB card continously(lasting for a fixed time, for example,1 minute). I
want a Timer, when it expires, the while loop will stop. But I do not
know how to implement it.
Any help would be greatly appriciated!
Thanks in advance.
zhljh
Sent via Deja.com http://www.deja.com/
Before you buy.

In article <87q5t2$7kh$[email protected]>, wrote:
>I am trying to use a while loop to read data from oscilloscope through
>GPIB card continously(lasting for a fixed time, for example,1 minute). I
>want a Timer, when it expires, the while loop will stop. But I do not
>know how to implement it.
So, you need it to count down, then I assume? Okay, you need to put a
true/false node within your for loop. Set the true case to i=1 (iteration
of the for loop) so that it will initialize one time (and be true one
time). Then, add whatever time you need for the vi to run to that
indicator (where you send a numeric value on the first iteration). Put a
greater than comparison to the timer and the additoin of the indicator and
your value. Let that be the term
inating thing on your for loop.
Now, this might present a problem with a circular reference. If it does,
you'll need to basically do the same thing, only you'll need to send the
value through a shift register in the for loop.
Harry

LR 1.4 Question about Group Edit Capture Time

Hey guys... working my way through...
Was wondering -- when I highlight a group of files -- and then go to the Metadata Menu and choose "Edit Capture Time" -- why doesn't it change the date of all the High-Ligghted Photos?
I am obviously doing something wrong... Can someone please tell me who to di it right?
THANKS!!

ambienttroutmask wrote:
It's a while since I used LR 1, but I think it was the same....to write time changes to RAW files, other than DNG's, you need to enable this in catalog settings. in metadata write changes into propitiatory RAW files. LR is very reluctant to write anything into propitiatory files (and rightly so), best to convert them to DNG's.
actually - i'm kinda confused.
all my images are DNG's.
All I want to do is take a group of photos I took in 2002 [that all have bad dates from different decades somehow] and correct a group of say 130 files at a time to a specific day from all the various days they are mistakenly showing in Capture Time.
But when I highlight a group of say 30 files and choose to EDIT CAPTURE TIME -- only 1 or maybe a couple of files change -- the rest stay.
iPhoto allowed me to Batch Change a group of photos from various dates to 1 single date -- but I am getting the impression LR 1.4 does not have the ability to do this.

Question about not connecting about WiFi

How do I use internet and facebook away from my WiFi? Whenever I leave home I can't connect to anything. Can't I just use data through the phone without wifi?

Hello Wkv2069 & Community!
If you have a smartphone that's active on a Verizon Wireless phone number then yes, you should definitely have access to our 3G or 4G network (depending on device/location).
What type of phone do you have? What does your phone say at the top when you're not at home?
Let us know so we can try to resolve this.
Thanks!
MelissaM_VZW
Follow us on Twitter @vzwsupport

A question about not having a pop up window for the hyperlink

Hello!
Now I am creating a hyperlink in my InDesign. After I transferred my indesign file into pdf and clicked on the link. There was always a pop up window asking me if I agree on going to this website or not. I don't want the people who recieved my ducument have this trouble. Is there a way for me to fix this? Thanks!

See: http://helpx.adobe.com/acrobat/kb/security-warning-trusting-pdf-acrobat.html

Is there any succesful answer to the many questions about not functioning wifi after installing mountain lion? Also when awakes after sleep MB frezees, wifi can´t get active, dock does not show, in general MB does´t respond. All this in mountain lion.

When awakes after sleep MB frezees, wifi can´t get active, dock does not show, in general MB does´t respond. All this after I installed an update of mountain lion.

Try starting up in Safe Mode and see if things are better.
http://support.apple.com/kb/ht1455

Question about Note 870814.1 - Backing up EM Database Control Data

Quick question -- why would you want to downgrade OEMDC after upgrading to 11gR2?
"After upgrading to Oracle Database 11g release 2(11.2), if you want to downgrade Oracle Enterprise Manager Database Control you must save your Database Control files and data before upgrading your database."

If you want to keep your current database control configuration after a downgrade you have to save this configuration before downgrading. Otherwise - after the downgrade - you would have a clean configuration. Database control continue to work, but it starts a new incarnation.
Werner

Question about not working CPU

How would I know if the CPU is not working on my laptop?

Believe you will know this immediately!!! ;)
For this you do not need to have PC know-how!

Verizon Prepaid - questions about not paying on time

Similar Messages

Maybe you are looking for