VL10 batch doesn't allow user role maintenance

A batch job to create deliveries is desired.
A user role was created using VL10CUA (copied from 5001).
Access VL10G to create a variant, but the User Role tab is completely display only.
According to OSS note 310022, step 2 indicates that user role can be maintained for background processing.
Currently using ECC 5.0. Why is the user role tab display only? What changes are necessary to create a variant using the new user role?
I also looked at the screen painter and the fields were "Possible" so that doesn't answer why they are display only when using VL10G.
Regards,
Bela

In VL10CUA, create a new user role from 5001 and click on Chg. Attributes and change F code to 5001.
Then assign the user role in VL10CUV to VL10 Scenario.
This will default the user role in VL10. Save the variant and then run VL10BATCH for the variant.

Similar Messages

Discussions login doesn't allow user to paste password

Hi all,
is it just me or does the discussions.apple.com not allow you to paste your password when signing in? Seems a bit of a security issue leaving you open to keyloggers....

The Jive software that runs these forums does not allow it.
Most of us just let it autofill.

User role maintenance (TX PFCG) : S_TCODE cannot be changed

Hello,
We have the following problem in the transaction code PFCG, when trying to edit the authorizations of a role:
the tree "S_TCODE" appears as "Standard" and can only be changed, if you set the authorization fields to "*" (full authorization) ,
please see the printscreen attached.
Is there a way to modify parts of "S_TCODE" ?
Thank you in advance.
Kind regards,
Noémi Pocsai

Hi Raymond,
Thank you for your reply.
My problem is that, I'd like to change the subtree "Transaction codes" , but it's not possible to edit this... or am I wrong?
Thank you in advance for an answer.
Kind regards,
Noémi

Tables for maintenance of end users in end user roles

hi all
i have a requirement to find out the tables involved in end user role maintenance based on the business process and step for the transaction solar02.
thanks & regards
srinivasulu.j

Hi,
As i already told you all the user names are coming from user master record which are stored in table
USR01.
Go to se11 enter table name USR01,and view its contents.
Here you can get the list of all the user's present in solman server.
normally basis team create users using pfcg or su01.
Please reward points.

How do we create role maintenance

hi gurus
How do we create user role maintenance could any one give me step by step procedure. It will be helpful for me
Thanks in advance

Hello,
The roles for the users normally created by BASIS by transaction PFCG. If you want ore details about the stepwise procedure, please post the thread in the BASIS forum.
Prase

Apple doesn't allow Mail users to open links with Chrome

Apple doesn't allow Mail users to open links with Chrome, Chrome is the deafult browser and it seems that there is a blockage for 3rd party browser, not very nice !!!!!!

Apple doesn't allow Mail users to open links with Chrome, Chrome is the deafult browser and it seems that there is a blockage for 3rd party browser, not very nice !!!!!!

VL10 User Role Tracking

VL10 User Role Tracking
Hi Gurus,
In VL10 t-code we have 6 tab pages in the initial screen.
Last one is "User Role". in this we will have several roles.
Assume that we used user role 1 and created deliveries. How to track those deliveries in LIKP or LIPS tables. Where in sap tables i can find the role used to create respective deliveries.
Actually i am planning to customize one user role and add it to VL10, so i need to track in the code, if user role = 2 then only make changes....
else come out of the changes;
kindly suggest me the table and field names to track deliveries based on user roles of VL10 t-code.
Please help me on this as it is very urgent;
thanks in advance
Sunil

Hi Sunil,
Wondering if you ever found a solution for this problem. Becos, I am also in a similar situation and your experience would be of great help if you share it.
Advance Thanks,
Anand.

Help my MAC OS X disc doesn't allow me to restore factory settings it just installs snow leopard and remains on my original user account?

Help my MAC OS X disc doesn't allow me to restore factory settings it just installs snow leopard and remains on my original user account?

You need to erase the disk first. From the 'Utilities' menu on the Install disk choose' Disk Utility; use this to erase the disk, then install the system plus (if it's the original install disk) any bundled applications.
I'm going to state the perfectly obvious just to be on the safe side: 'Erase disk' does exactly that - everything on the disk will be gone.

Trying to understand "User/Role/Profile Synchronization" and Batch Analysis

Hello,
Im trying to understand what exactly and from which tables these jobs are copying to which tables in CC. I have a understanding that these jobs are moving also deleted roles from backend. This is causing unnecessary delay to long lasting job.
I would appreasite if some one could explain the logic behind these jobs. What the fullsync and incremental is reading ? What kind of changes are causing a role/user/profile to be included to the full and incremental jobs?
How the incremental analysis logic is built ?
br Janne

Janne,
In my current implementation we are going for an offline risk analysis due to the heteregoneus system landscape of our client (several SAP and non SAP systems and several SAP systems under 4.6C). Eventhough within our approach we don't perfrom the backend synchronization (we use CC data extractor to pull data from backend into CC) hope the following info could hel you:
The tables such jobs you mention access to, are all the SAP backend system tables related with users, roles, profiles, action and permissions. If you check the data mapping appendix of the "user and configuration guide for 5.2" you will see all the data that CC retrieves. For instance, in order to extract user info (UserID, FName, LName, Email, Phone, Email, Department) tables USR21, USR02, ADRP, ADR6 and ADCP must be accessed.
In terms of CC tables:
VIRSA_CC_SYSUSR >> UserIDs and Systems ID relationship
VIRSA_CC_GENOBJ >> User, Role and Profile master data
VIRSA_CC_GENACT >> User-action, role-action and profile-action data
VIRSA_CC_GENPRM >> User-permission, role-permission and profile-permission
VIRSA_CC_SAPOBJ >> Action-permission
VIRSA_CC_OBJTEXT >> Objects descripcions (ACT, PRM, FLD, VAL, ORG)
Hope this helps.
Regards,
Imanol

Request Offerings not showing up for custom User role in SMPortal

Hello All,
I've created a custom End User role and scoped it to the domain users group.
To this role I want to show a specific set of Request Offerings on the portal
For that Purpose I created a new Service Offering and added these Request Offerings to it.
I then went on to create a Catalog Group and added the Service Offering to it.
I then created the custom user role based on the EndUser role and allowed them to see all Forms, all Queues, All CI's and on the Catalog group I select that they could only see the Catalog Group which I just created.
I then logged in into the SMPortal and was expecting that my Service Offering would be shown to them.
However, they don't see the service offering.
What could cause this?
Is there something I'm missing?
Thanks in advance!
Filip

You have to add the Service Offerings and the Request Offerings in the Catalog Group. Nesting doesn't work because Service Offerings and Request Offerings are different types of objects.
This offers the option the manage the access to Service Offerings and Request Offerings very granular if needed. For instance you can control access to a Service Offering in one Catalog Group related to one user role (A) and use two additional Catalog Groups
with different Request Offerings related to other user roles (B) and (C). Result will lead to:
User in Role A and B -> Can see Service Offerings A containing Request Offerings B
User in Role A and C -> Can see Service Offerings A containing Request Offerings C
User in Role A, B and C -> Can see Service Offerings A containing Request Offerings B and C
User in Role A only -> Don's see anything because of the missing permission on any Request Offering. So the "empty" Service Request won't show up in the portal.
Hope his helps.
Andreas Baumgarten | H&D International Group

Modify Script to Create User Role on Single Database.

Hi All,
Below is the script to create user role on database. Here problem is when I execute this script, it creates user role for all database within an instance and I want it to create user role only on 2 database say TEST1 and TEST2
Can anyone help me to modify the script?
--===================================================================================
-- Description
-- Database Type: MSSQL
-- This script creates a role called 'gdmmonitor' for ALL databases.
-- It grants some system catalogs to this role to allow Classification and Assessment on the database.
-- It then adds a user called "sqlguard" to all databases and grants this user gdmmonitor role.
-- before runnign this script
-- you MUST CREATE A SQL LOGIN CALLED 'sqlguard'
-- This sqlguard login doesn't need to be added to any database or given
-- any privilege. The script will take care of that.
-- Note:
-- If you wish to use a different login name (instead of 'sqlguard') you need to change
-- the value of the variable '@Guardium_user' in the script below;
-- (Look for the string: "set @Guardium_user = 'sqlguard'" and replace the 'sqlguard')
-- after runnign this script
-- Nothing to do, the script already creates the db user
-- User/Password to use
-- User: sqlguard (or any other name, if changed)
-- Pass: user defined
-- Role: gdmmonitor
--===================================================================================
PRINT '>>>==================================================================>>>'
PRINT '>>> Creating role: "gdmmonitor" at the server level.'
PRINT '>>>==================================================================>>>'
-- Change to the master database
USE master
-- *** If a different login name is desired, define it here. ***
DECLARE @Guardium_user AS varchar(50)
set @Guardium_user = 'sqlguard'
DECLARE @dbName AS varchar(256)
DECLARE @memberName AS varchar(256)
DECLARE @dbVer AS nvarchar(128)
SET @dbVer = CAST(serverproperty('ProductVersion') AS nvarchar)
SET @dbVer = SUBSTRING(@dbVer, 1, CHARINDEX('.', @dbVer) - 1)
IF (@dbVer = '8') SET @dbVer = '2000'
ELSE IF (@dbVer = '9') SET @dbVer = '2005'
ELSE IF (@dbVer = '10') SET @dbVer = '2008'
ELSE IF (@dbVer = '11') SET @dbVer = '2012'
ELSE SET @dbVer = '''Unsupported Version'''
IF (@dbVer != '2000')
BEGIN
-- This privilege is required to peform a specific MSSQL test.
-- Test name: SQL OLEDB disabled (DisallowAdhocAccess registry key)
-- Procedure execute: EXEC master.dbo.sp_MSset_oledb_prop
-- Purpose: To display provider property, not changing anything.
PRINT '==> Granting MSSSQL 2005 and above setupadmin server role'
EXEC master..sp_addsrvrolemember @loginame = @Guardium_user, @rolename = N'setupadmin'
END
SELECT @dbName = DB_NAME()
PRINT '==> Starting MSSql ' + @dbVer + ' role creation on database: ' + @dbName
-- find any members of the role if they exist
CREATE TABLE #rolemember (membername VARCHAR(256) NOT NULL)
INSERT INTO #rolemember
SELECT DISTINCT usr.name FROM dbo.sysusers usr, .dbo.sysmembers mbr
WHERE usr.uid = mbr.memberuid
AND mbr.groupuid = (SELECT uid FROM .dbo.sysusers WHERE name = 'gdmmonitor')
-- Drop the Role Members If they exist
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Dropping the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Dropping member: ''' + @memberName + ''''
exec('EXEC sp_droprolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the role if it exists
IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = 'gdmmonitor')
BEGIN
PRINT '==> Dropping the role gdmmonitor on: ' + @dbName
exec sp_droprole 'gdmmonitor'
END
-- Create the role
PRINT '==> Creating the role gdmmonitor on: ' + @dbName
exec sp_addrole 'gdmmonitor'
-- Grant select privileges to the role for MSSql Common
PRINT '==> Granting common SELECT privileges on: ' + @dbName
GRANT SELECT ON dbo.spt_values TO gdmmonitor
GRANT SELECT ON dbo.sysmembers TO gdmmonitor
GRANT SELECT ON dbo.sysobjects TO gdmmonitor
GRANT SELECT ON dbo.sysprotects TO gdmmonitor
GRANT SELECT ON dbo.sysusers TO gdmmonitor
GRANT SELECT ON dbo.sysconfigures TO gdmmonitor
GRANT SELECT ON dbo.sysdatabases TO gdmmonitor
GRANT SELECT ON dbo.sysfiles TO gdmmonitor
GRANT SELECT ON dbo.syslogins TO gdmmonitor
GRANT SELECT ON dbo.syspermissions TO gdmmonitor
-- Grant execute privileges to the role for MSSql Common
PRINT '==> Granting common EXECUTE privileges on: ' + @dbName
GRANT EXECUTE ON sp_helpdbfixedrole TO gdmmonitor
GRANT EXECUTE ON sp_helprotect TO gdmmonitor
GRANT EXECUTE ON sp_helprolemember TO gdmmonitor
GRANT EXECUTE ON sp_helpsrvrolemember TO gdmmonitor
GRANT EXECUTE ON sp_tables TO gdmmonitor
GRANT EXECUTE ON sp_validatelogins TO gdmmonitor
GRANT EXECUTE ON sp_server_info TO gdmmonitor
-- Check if the version is 2005 or greater
IF (@dbVer != '2000')
BEGIN
-- Grant select privileges to the role for MSSql 2005 and above
PRINT '==> Granting MSSql 2005 and above SELECT privileges on: ' + @dbName
GRANT SELECT ON sys.all_objects TO gdmmonitor
GRANT SELECT ON sys.database_permissions TO gdmmonitor
GRANT SELECT ON sys.database_principals TO gdmmonitor
GRANT SELECT ON sys.sql_logins TO gdmmonitor
GRANT SELECT ON sys.sysfiles TO gdmmonitor
GRANT SELECT ON sys.database_role_members TO gdmmonitor
GRANT SELECT ON sys.server_role_members TO gdmmonitor
GRANT SELECT ON sys.configurations TO gdmmonitor
GRANT SELECT ON sys.master_key_passwords TO gdmmonitor
GRANT SELECT ON sys.server_principals TO gdmmonitor
GRANT SELECT ON sys.server_permissions TO gdmmonitor
GRANT SELECT ON sys.credentials
TO gdmmonitor
--This is called by master.dbo.sp_MSset_oledb_prop.
--By defautl it should have already been granted to public.
GRANT EXECUTE ON sys.xp_instance_regread TO GDMMONITOR
GRANT EXECUTE ON sys.sp_MSset_oledb_prop TO GDMMONITOR
END
-- Re-add the dropped members
IF EXISTS (SELECT 1 FROM #rolemember)
BEGIN
PRINT '==> Re-adding the role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Re-adding member: ''' + @memberName + ''''
exec('EXEC sp_addrolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- END of role creation on database
PRINT '==> END of role creation on: ' + @dbName
PRINT ''
-- Change to the msdb database
USE msdb
set @memberName = ''
SELECT @dbName = DB_NAME()
PRINT '==> Starting MSSql ' + @dbVer + ' role creation on database: ' + @dbName
-- find any members of the role if it exists
TRUNCATE TABLE #rolemember
INSERT INTO #rolemember
SELECT DISTINCT usr.name FROM .dbo.sysusers usr, .dbo.sysmembers mbr
WHERE usr.uid = mbr.memberuid
AND groupuid = (SELECT uid FROM .dbo.sysusers WHERE name = 'gdmmonitor')
-- Drop the Role Members If they exist
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Dropping the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Dropping member: ''' + @memberName + ''''
exec('EXEC sp_droprolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the role if it exists
IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = 'gdmmonitor')
BEGIN
PRINT '==> Dropping the gdmmonitor role on: ' + @dbName
exec sp_droprole 'gdmmonitor'
END
-- Create the role
PRINT '==> Creating the gdmmonitor role on: ' + @dbName
exec sp_addrole 'gdmmonitor'
-- Grant select privileges to the role for MSSql Common
PRINT '==> Granting common SELECT privileges on: ' + @dbName
GRANT SELECT ON dbo.sysobjects TO gdmmonitor
GRANT SELECT ON dbo.sysusers TO gdmmonitor
GRANT SELECT ON dbo.sysprotects TO gdmmonitor
GRANT SELECT ON dbo.sysmembers TO gdmmonitor
GRANT SELECT ON dbo.sysfiles TO gdmmonitor
GRANT SELECT ON dbo.syspermissions TO gdmmonitor
GRANT SELECT ON dbo.backupset TO gdmmonitor
-- Check if the version is 2005 or greater
IF (@dbVer != '2000')
BEGIN
-- Grant select privileges to the role for MSSql 2005 and above
PRINT '==> Granting MSSql 2005 and above SELECT privileges on: ' + @dbName
GRANT SELECT ON sys.all_objects TO gdmmonitor
GRANT SELECT ON sys.database_permissions TO gdmmonitor
GRANT SELECT ON sys.database_principals TO gdmmonitor
GRANT SELECT ON sys.sysfiles TO gdmmonitor
-- Grant execute privileges to the role for MSSql 2005 or above
PRINT '==> Granting MSSql 2005 and above EXECUTE privileges on: ' + @dbName
GRANT EXECUTE ON msdb.dbo.sp_enum_login_for_proxy TO gdmmonitor
GRANT SELECT ON sys.database_role_members TO gdmmonitor
END
IF (@dbVer > '2000' and @dbVer < '2012')
--This sp is not available in SQL 2012
BEGIN
GRANT EXECUTE ON sp_get_dtspackage TO gdmmonitor
END
-- Re-add the dropped members
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Re-adding the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Re-adding member: ''' + @memberName + ''''
exec('EXEC sp_addrolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the temporary table
DROP TABLE #rolemember
-- END of role creation on database
PRINT '==> END of gdmmonitor role creation on: ' + @dbName
-- Role creation complete
PRINT '<<<==================================================================<<<'
PRINT '<<< END of creating role: "gdmmonitor" at the server level.'
PRINT '<<<==================================================================<<<'
PRINT ''
PRINT '>>>==================================================================>>>'
PRINT '>>> Starting application database role creation'
PRINT '>>>==================================================================>>>'
use master
DECLARE @databaseName AS varchar(80)
DECLARE @executeString AS varchar(7950)
DECLARE @dbcounter as int
set @dbcounter = 0
DECLARE DatabaseCursor CURSOR FOR SELECT name from sysdatabases where name not in ('master', 'msdb')
and not (status & 1024 > 1)
--read only
and not (status & 4096 > 1)
--single user
and not (status & 512 > 1)
--offline
and not (status & 32 > 1)
--loading
and not (status & 64 > 1)
--pre recovery
and not (status & 128 > 1)
--recovering
and not (status & 256 > 1)
--not recovered
and not (status & 32768 > 1)
--emergency mode
OPEN DatabaseCursor
FETCH DatabaseCursor INTO @databaseName
WHILE @@Fetch_Status = 0
BEGIN
set @dbcounter = @dbcounter + 1
set @databaseName = '"' + @databaseName + '"'
set @executeString = ''
set @executeString = 'use ' + @databaseName + ' ' +
'PRINT ''>>>==================================================================>>>'' ' +
'PRINT ''>>> Starting MSSql ' + @dbVer + ' role creation on database: ' + @databaseName + ''' ' +
'PRINT ''>>>==================================================================>>>'' ' +
'/* Variable @memberNameDBname must be declare within the string or else it will fail */ ' +
'DECLARE @memberName' + cast(@dbcounter as varchar(5)) + ' as varchar(50) ' +
'/*find any members of the role if it exists*/ ' +
'CREATE TABLE #rolemember (membername VARCHAR(256) NOT NULL) ' +
'INSERT INTO #rolemember ' +
'SELECT DISTINCT usr.name FROM dbo.sysusers usr, dbo.sysmembers mbr ' +
'WHERE usr.uid = mbr.memberuid ' +
'AND groupuid = (SELECT uid FROM dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'/*Drop the Role Members If they exist*/ ' +
'IF EXISTS (SELECT * FROM #rolemember) ' +
'BEGIN ' +
'PRINT ''==> Dropping the role members on: ' + @databaseName + ''' ' +
'DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember ' +
'OPEN DropCursor ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'WHILE @@Fetch_Status = 0 ' +
'BEGIN ' +
'PRINT ''==> Dropping member: '' + @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'exec(''EXEC sp_droprolemember ''''gdmmonitor'''', '''''' + @memberName' + cast(@dbcounter as varchar(5)) + ' + '''''';'') ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'END ' +
'CLOSE DropCursor ' +
'DEALLOCATE DropCursor ' +
'END ' +
'/*drop the role if it exists*/ ' +
'IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'BEGIN ' +
'PRINT ''==> Dropping the gdmmonitor role on: ' + @databaseName + ''' ' +
'exec sp_droprole ''gdmmonitor'' ' +
'END ' +
'/* Create the role */ ' +
'PRINT ''==> Creating the gdmmonitor role on: ' + @databaseName + ''' ' +
'exec sp_addrole ''gdmmonitor'' ' +
'/* Grant select privileges to the role for MSSql Common */ ' +
'PRINT ''==> Granting common SELECT privileges on: ' + @databaseName + ''' ' +
'GRANT SELECT ON dbo.sysmembers TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysobjects TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysprotects TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysusers TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysfiles TO gdmmonitor ' +
'GRANT SELECT ON dbo.syspermissions TO gdmmonitor ' +
'/* Check if the version is 2005 or greater */ ' +
'IF (' + @dbVer + ' != ''2000'') ' +
'BEGIN ' +
'/* Grant select privileges to the role for MSSql 2005 and above */ ' +
'PRINT ''==> Granting MSSql 2005 and above SELECT privileges on: ' + @databaseName + ''' ' +
'GRANT SELECT ON sys.database_permissions TO gdmmonitor ' +
'GRANT SELECT ON sys.all_objects TO gdmmonitor ' +
'GRANT SELECT ON sys.database_principals TO gdmmonitor ' +
'GRANT SELECT ON sys.sysfiles TO gdmmonitor ' +
'GRANT SELECT ON sys.database_role_members TO gdmmonitor ' +
'END ' +
'/* Re-add the dropped members */ ' +
'IF EXISTS (SELECT 1 FROM #rolemember) ' +
'BEGIN ' +
'PRINT ''==> Re-adding the gdmmonitor role members on: ' + @databaseName + ''' ' +
'DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember ' +
'OPEN DropCursor ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'WHILE @@Fetch_Status = 0 ' +
'BEGIN ' +
'PRINT ''==> Re-adding member: '' + @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'exec(''EXEC sp_addrolemember ''''gdmmonitor'''', '''''' + @memberName' + cast(@dbcounter as varchar(5)) + ' + '''''';'') ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'END ' +
'CLOSE DropCursor ' +
'DEALLOCATE DropCursor ' +
'END ' +
'/* drop the temporary table */ ' +
'DROP TABLE #rolemember ' +
'PRINT ''<<<==================================================================<<<'' ' +
'PRINT ''<<< END of role creation on: ' + @databaseName + ''' ' +
'PRINT ''<<<==================================================================<<<'' ' +
'PRINT '' ''' +
'PRINT '' '''
execute (@executeString)
FETCH DatabaseCursor INTO @databaseName
END
CLOSE DatabaseCursor
DEALLOCATE DatabaseCursor
-- Adding user to all the databases
-- and grant gdmmonitor role, only if login exists.
PRINT '>>>==================================================================>>>'
PRINT '>>> Add and Grant gdmmonitor role to: ''' + @Guardium_user + ''''
PRINT '>>> on all databases.'
PRINT '>>>==================================================================>>>'
USE master
/* Check if @Guardium_user is a login exist, if not do nothing.*/
IF NOT EXISTS (select * from syslogins where name = @Guardium_user)
BEGIN
PRINT ''
PRINT '************************************************************************'
PRINT '*** ERROR: Could not find the login: ''' + @Guardium_user + ''''
PRINT '*** Please add the login and re-run this script.'
PRINT '************************************************************************'
PRINT ''
END
ELSE
BEGIN
DECLARE @counter AS smallint
set @counter = 0
-- This loop runs 4 time just to make sure that the @Guardium_user gets added to all db.
-- 99% of the time, this is totally unnecessary. But in some rare case on SQL 2005
-- the loop skips some databases when it tried to add the @Guardium_user.
-- After two to three executions, the user is added in all the dbs.
-- Might be a SQL Server bug.
WHILE @counter <= 3
BEGIN
set @counter = @counter + 1
set @databaseName = ''
set @executeString = ''
DECLARE DatabaseCursor CURSOR FOR SELECT name from sysdatabases
where not (status & 1024 > 1)
--read only
and not (status & 4096 > 1)
--single user
and not (status & 512 > 1)
--offline
and not (status & 32 > 1)
--loading
and not (status & 64 > 1)
--pre recovery
and not (status & 128 > 1)
--recovering
and not (status & 256 > 1)
--not recovered
and not (status & 32768 > 1)
--emergency mode
OPEN DatabaseCursor
FETCH DatabaseCursor INTO @databaseName
WHILE @@Fetch_Status = 0
BEGIN
set @databaseName = '"' + @databaseName + '"'
set @executeString = ''
set @executeString = 'use ' + @databaseName + ' ' +
'/*Check if the login already has access to this database */ ' +
'IF EXISTS (select * from sysusers where name = ''' + @Guardium_user + ''' and islogin = 1) ' +
'BEGIN ' +
'/*Check if login already have gdmmonitor role*/ ' +
'IF NOT EXISTS (SELECT usr.name FROM dbo.sysusers usr, dbo.sysmembers mbr WHERE usr.uid = mbr.memberuid ' +
'AND mbr.groupuid = (SELECT uid FROM dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'AND usr.name = ''' + @Guardium_user + ''') ' +
'BEGIN ' +
'PRINT ''==> Granting gdmmonitor role to ' + @Guardium_user + ' on database ' + @databaseName + ''' ' +
'execute sp_addrolemember ''gdmmonitor''' + ', [' + @Guardium_user + '] ' +
'PRINT '' ''' +
'END ' +
'END ' +
'IF NOT EXISTS (select * from sysusers where name = ''' + @Guardium_user + ''' and islogin = 1) ' +
'BEGIN ' +
'PRINT ''==> Adding user [' + @Guardium_user + '] to database: ' + @databaseName + ''' ' +
'execute sp_adduser [' + @Guardium_user + '] ' +
'PRINT ''==> Granting gdmmonitor role to ' + @Guardium_user + ' on database ' + @databaseName + ''' ' +
'execute sp_addrolemember ''gdmmonitor''' + ', [' + @Guardium_user + '] ' +
'PRINT '' ''' +
'END '
execute (@executeString)
FETCH DatabaseCursor INTO @databaseName
END
CLOSE DatabaseCursor
DEALLOCATE DatabaseCursor
END -- end while
-- Required for Version 2005 or greater.
IF (@dbVer != '2000')
BEGIN
-- Grant system privileges to the @guardium_user. This is a requirement for >= SQL 2005
-- or else some system catalogs will filter our result from assessment test.
-- This will show up in sys.server_permissions view.
PRINT '==> Granting catalog privileges to: ''' + @Guardium_user + ''''
execute ('grant VIEW ANY DATABASE to [' + @Guardium_user + ']' )
execute ('grant VIEW ANY DEFINITION to [' + @Guardium_user + ']' )
END
PRINT '<<<==================================================================<<<'
PRINT '<<< Finished Adding and Granting gdmmonitor role to: ''' + @Guardium_user + ''''
PRINT '<<< on all databases.'
PRINT '<<<==================================================================<<<'
PRINT ''
END
GO

Thanks a lot Sir... it worked.
Can you also help me in troubleshooting below issue?
This script is working fine on all databases except one MS SQL 2005 database. build of this database is 9.00.3042.00
SA account with highest privileges is been used for script execution. errors received are as follow:
>>>==================================================================>>>
>>> Creating role: "gdmmonitor" at the server level.
>>>==================================================================>>>
==> Granting MSSSQL 2005 and above setupadmin server role
==> Starting MSSql 2005 role creation on database: master
(0 row(s) affected)
==> Dropping the gdmmonitor role members on: master
==> Creating the role gdmmonitor on: master
Msg 15002, Level 16, State 1, Procedure sp_addrole, Line 16
The procedure 'sys.sp_addrole' cannot be executed within a transaction.
==> Granting common SELECT privileges on: master
Msg 15151, Level 16, State 1, Line 117
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 118
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 119
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 120
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 121
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 122
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 123
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 124
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 125
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 126
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
==> Granting common EXECUTE privileges on: master
Msg 15151, Level 16, State 1, Line 130
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 131
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 132
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 133
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 134
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 135
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 136
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.

VL10 Batch

Hi Gurus,
Can anyone give me details about Delivery Due list Batch processing.
Thanks,
Sharath.

Hi Jayant,
If you have already used Vl10 trnasaction and you are familiar with different selections screens in VL10, user and Fcode profile then it is little easy to schedule a job for creating deliveries in background using VL10Batch.
Basically you create a variant here and in this selection variant you define various values for paramerters in the screens of VL10. For example you will define shipping point, delivery date values for screen 1000 and similarly you can also restrict selection for deliveries for particular sales orders by directly giving values in selection screen 1020. All these criterias will be considered while delivery creation. Once you are done with variant, you can simply select the variant and schedule a job immediately or for later processing using this transaction.
I found following documentation for VL10Batch from SAP help :
You can schedule delivery creation for whenever you like using automatic background processing.
Procedure:
To plan background processing for delivery creation, proceed as follows:
Either apply a user role for background processing or make a copy of a user role for shipment due processing for yourself. During the test phase, use a function code profile for shipment due list display within this user role.
Test the shipment due processing with this user role until you only need to execute the Create delivery in background function after the shipment due list is first displayed in order to ship part of the delivery list. (Vary the rules for line selection or for quantity definition during item processing, for instance.)
Change the function code profile in the user role from Display to Deliver.
From shipping, choose Outbound Delivery ->Create -> Collective Processing of Documents Due for Delivery -> Delivery scenario of your choice.
Choose the user role that you want to use for background scheduling in the User role field on the User role tab page.
Enter additional selection parameters on the selection screen.
Save the selection screen as a variant.
From shipping, choose Outbound delivery -> Create -> Collective Processing of Documents Due for Delivery -> Plan Background Processing and execute the delivery scenario for background planning.
Choose the selection variant you want and then select Schedule job.
Follow the basis dialog for scheduling a background job.
I hope this has given you some details.
Regards.
Priti

How to implement Oracle user/role security with Access front end?

Hi,
We have successfully migrated our Access database tables to Oracle 10g using SQL developer. We've recreated all the users and roles(i.e., access groups) in Oracle and granted rights to tables.
In the Access front end database, in the Database window we have saved linked Oracle tables which replaced the Access tables. The forms, reports, queries run fine with the linked Oracle tables. All the linked table use one ODBC DSN to the Oracle database with the same Oracle user id.
We need to be able to authenticate users into the Oracle database and RE-link the tables based on their own unique user id. By during so we can allow users to use the Oracle standard user id/role and system privileges to control select, update, ect. rights to the database.
I've been able to use the VB code within Access to logon into the database with a unique id, but I have not been able to find out how to RE-link the tables to the unique user id using VB. There should be some way to relink tables dynamically, based on users login into the Access front end.
I don't know a great deal about Access projects, but I do know with SQL server allows login into your Access project and link tables dynamically.
Can someone give me some assistance or point me in the right direction?
Thanks in advance,
Larry

We had one of our programmers here come up with a VB code solution for re-linking table within Access. However the relinking takes 3-4 minutes for 100+ tables.
In an effort to help you understand the situation better, I will attempt to elaborate on the problem:
We have an Access 2003 application which currently has a front end using Access(forms, reports, queries, & VB code) and a MS Access 2003 backend.
We have migrated the backend tables to Oracle. However, we still have a need to maintain the front end in Access, since we have over 60 forms, 40 reports, 200+ queries in Access. Its easy to understand, we have a significant investment in the front end(Obviously, the plan is to migrate the front end also at some future date).
In order to utilized the existing front end, we have to validate and modify the current front end connections to the new Oracle backend. One of the features of Access is that you can "link" tables and save the link for runtime. Each Access table can have its own link which is a separate ODBC/JET connection. As such, each separate link has its own userid/database information.
The other issue with using the Access front-end is that Access utilizes a workgroup file to implement user and group security. The workgroup file contains all the users and which groups the users belong to in Access. Then within Access, you allow users access to object(tables, queries, ect) by their userid and or group. When users open an Access database with Access security enabled, they are required to log into Access. The login is authenticated by the workgroup file. Once, logged into Access, users have rights to Access objects based on their rights granted to their userid and groups they belong. The problem here is that when you remove the linked Access tables and replace them with linked Oracle tables, Access has knowledge about Oracle table rights granted to users; nor would you expect it to.
The dilema is the disconnect between Access and the fact Oracle utilizes a similar but much more sophisticated security model. It creates users and roles(which are similar to Access groups), and again this is independent of Access security.
Our solution was to still use the Access workgroup file security along with the Oracle security model. By using the Access userid and then creating a similar Oracle userid with similar table rights granted in Access, you could apply security within Access and also with the Oracle database.
For example, a user BOB logs into Access via the workgroup file, using VB code, Access then establishes a Oracle connection logining into Oracle using the same unique userid BOB into Oracle.
After connecting and validating user BOB into Oracle, then the Access tables are relinked to Oracle using the user BOB userid and table rights.
This Oracle userid has been granted table rights specific for this userid.This allows the user BOB to use the Access application and still be authenticated into the Oracle database.
The problem with this solution is that the relinking of the saved Access tables takes 3-7 minutes for about 100+ tables. This is not acceptable for users each time they log into the application.
Our current alternative is to use one Oracle userid to login each user, and use Access form restrictions/security to allow/prevent users from updating/viewing data. Obviously, this is not the optimal solution in respect to security, but it at least allows us to control access to the data(via the forms) by using one logon required for each user, and quick startup time for the application.
I understand SQL server does a better job in integration, but we use Oracle which is what I am trying to work with.
Larry

Help! itunes 12 wont allow users to redownload past purchases all at once like it used to. Is there a way around this?

Help! For some reason i-tunes 12 wont allow users to re-download past purchases all at once like it used to. Is there a way around this? It will only allow you to download what it calls "Recent Purchases" which in my case only would allow 250 items. I know i have at least 700 tracks if not substantially more possibly over 2000 tracks but I can't be sure. I don't know how to find that information, I've looked in itunes under the my account past purchases but id doesn't tell you how many total songs you have purchased or any relevant details. It only shows you small chunks of receipts by date but no total tracks purchased in an easy to view snapshot that I could find. The current support page says that if you have more then 2000 songs the "ALL SONGS" tab now listed above the left pan with all your purchased artists, will change to "Recent Purchases". IF apple changed this on purpose to stop user from downloading there entire library to cut down on bandwidth they have really upset me this time. At present the only way I can download all past purchases is by selecting each artist listed in the left pan one by one selecting the "Download ALL" button at the bottom right corner of the page at which point I have to input my apple password each time, which really slows things down. I have hundreds of artists and if this is the only way for customers to re-download there entire library this is ridiculous and really unnecessary to put customers through this kind hassle just to re-download all there past purchases when the whole idea of i-cloud is to make downloading and using your music simple, quick, and convenient on multiple devices. I know the old saying "your responsible for backing up your data" yeah I know that and I've been doing that for years when no one really should ever have had too. There is no reason a service that sells music digitally should not allow customers to be able to re download content purchased on there service regardless of the fact that people should just back up anyway as an extra precaution. Well sometimes backups fail like in my case and I have to re-download. No wonder paid subscription plans are so popular. You don't have to deal with any of these issues. I can only hope this is some kind of oversight by apple and will be fixed soon. Can anyone offer a quicker solution or any information about this issue? I would greatly appreciate any helpful assistance.
Again this is for Windwos 8.1 x64 with Itunes 12.0.1.26

After spending way too much time dealing with this issue myself, I discovered that you can:
- Within "My Music", select all the songs you need to download (all w/ the cloud icon - use Shift-Click)
- Right click and select download
All songs will begin downloading from iCloud

HT5527 How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."

How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."
The only way it allows me to click "next" is if I choose the $100.00 plan. The email that was sent to me says that I should upgrade or reduce storage because my plan will be reduce to 5GB as of September 30, 2013. Please advise.

Try Settings>iCloud>Storage & Backup>Change Storag Plan. If you are a former MobileMe user you should see Purchase Current Plan listed between the 20GB and 50GB options.

VL10 batch doesn't allow user role maintenance

Similar Messages

Maybe you are looking for