Want Access Data Grid control in SharePoint 2013?

Hello everyone!
Recently we noticed something funny in SharePoint 2013. While quite many people were hoping to have the datasheet view like those in SP2007 and 2010, Microsoft has chosen a different interface to display datasheet view.
Now, if you try to create a sub site under a publishing site, and use the
Publishing Site template then try to create a datasheet view in the sub site, SharePoint will try to use the Access data grid control to display the view. In some situations the view will display and other situations it will not, and will show this
error:
The list is displayed in Standard view. It cannot be displayed in Datasheet view for one or more of the following reasons: A datasheet component compatible with Microsoft SharePoint Foundation is not installed, your browser does not support ActiveX controls,
a component is not properly configured for 32-bit or 64-bit support, or support for ActiveX controls is disabled.
If you create a sub site using Publishing Site with Workflow instead, then the datasheet view will be created properly using SP2013 interface.
Using PowerShell, we can see that both Publishing Portal and
Publishing Site With Workflow are using the BLANKINTERNET 53 template. The
Publishing Site on the other hand is using the CMSPUBLISHING 39 template.
Want to try it out and let me know if that happens to your SharePoint too?

Hi Conway,
I tested the issue in my environment per your description and it returned the results as below:
I created a subsite using Publishing site under a team site in SharePoint server 2013, the datasheet view in a list displayed as pic1
I reproduced the issue in SharePoint server 2010, the datasheet view in a list displayed as pic2
It turns out by design the datasheet view in the subsite based on Publishing site template displays as your situation. Here is an article which explains this:
http://www.sharepointblues.com/2010/03/31/data-sheet-view-not-working/
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Similar Messages

Out-of-date Silverlight blocking in sharepoint 2013 sites in IE

Out-of-date Silverlight blocking in sharepoint 2013 sites in IE
http://blogs.msdn.com/b/ie/archive/2014/10/14/october-2014-updates-and-a-preview-of-changes-to-out-of-date-activex-control-blocking.aspx
How to fix this in a code. We can not change client's IE policies to update this. Do they need to use chrome?
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi,
I’m afraid we could not fix this in the SharePoint perspective, as it is a update for IE.
When allowSilverlightPrompt method is set to false,
users will not be prompted to load Silverlight if it isn’t already installed.
It is not for disable the Silverlight for the users who have installed the Silverlight.
http://www.dontpapanic.com/blog/?p=116
If your company policy could not update the IE, instead of using IE, I recommend you can use the Chrome or Firefox browser.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Data Grid Control +JSP+Sorting

Hi,
Can any one help me regarding In JSP by using Data Grid Control to sort columns in table and displayed in same JSP.

Yes! We can help! Do you have any other questions?
Edited by: SoulTech2012 on Sep 20, 2008 11:51 AM

Access Denied Using REST in SharePoint 2013 and InfoPath 2013 environment

So here is the story. I developed a simple application in InfoPath 2013 (saving as InfoPath 2010) and published to a SharePoint 2010 server.
A major component to my form is the use of REST to query a SharePoint list. Everything works fine and dandy through the web browser within the SharePoint 2010 environment. Now that I have moved the source list to SharePoint 2013, saved the form as InfoPath
2013, reset the REST data connection, and published to SharePoint 2013, I get the following message on the Form Load.
Warning
An error occurred querying a data source.
Click OK to resume filling out the form. You may want to check your form data for errors.
Hide error details
The underlying connection was closed: An unexpected error occurred on a receive.
An entry has been added to the Windows event log of the server.
Log ID:5566
Correlation ID:116a259c-904c-d098-fc14-956c88240dd8
When I go to the Event Viewer, I see this......
WebHost failed to process a request.
Sender Information: System.ServiceModel.Activation.HostedHttpRequestAsyncResult/55627478
Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/ListData.svc' cannot be activated due to an exception during compilation. The exception message is: Exception has been
thrown by the target of an invocation.. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Any thoughts, questions, or troubleshooting ideas would be very welcome!
Thanks in advance.

Same issue here calling UserProfile REST.
ULS says:
The following query failed: My REST Web Service (User: 0#.w|domain\administrator, Form Name: Personal, IP: , Connection Target: , Request:
http://server/_layouts/15/FormServer.aspx?XsnLocation=http://server/Pesonal/Forms/template.xsn&SaveLocation=http://server/Pesonal&ClientInstalled=true&DefaultItemOpen=1&Source=http://server/Pesonal/Forms/AllItems.aspx, Form ID: urn:schemas-microsoft-com:office:infopath:PErsonal:-myXSD-2013-09-27T19-45-38
Type: DataAdapterException, Exception Message: The form cannot run the specified query. The remote server returned an error: (401) Unauthorized.)
It works fine in Preview and Filler but dies in the browser.
SharePoint 2013
Matthew McDermott, MVP SharePoint

Access 2010 field reports in SharePoint 2013 Cloud

I had this error in sharepoint 2010 but I was able to fix it with a system state module in IIS but in the cloud office 365 (sharepoint 2013) they will not fix this, is there any way to work around this
Sorry, something went wrong
Access
Services 2010 reports are not enabled. To view the report, open the report in the Access client.
TECHNICAL
DETAILS
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 0a07689c-33f0-300a-fee1-8e8525ddb541
Date and Time: 1/7/2014 11:52:56 AM
I know that reports will not have that same error when you step into the central admin but I dont have control of the iis or central admin, any feedback would be great thanks.

ok Update since I had a local server I ended up using my server for the reports since they are linked inside access it dint bother the program I had built only, trouble is now I have two separate access databases not sure if I can clone that information
from the cloud and double it as a back up server on the local edition. otherwise the reports will be outdated.
technet sharepoint alert

Hide/remove "memberof" data in hover preview sharepoint 2013 simple directory

I have a simple people directory set up all is working fine as described here: http://www.sharepointconfig.com/2013/05/how-to-create-a-simple-sharepoint-2013-people-directory/
i would like to remove the hover window to the right or the Member Of info:
the data seems to pull from the "MemberOf" attribute" located in Manage User Properties as well as in Manage Policies. The policy setting for this field is grayed out and disabled. It is the only attribute set to disabled by default and cannot
figure out how to change this.

Hi ian,
Could you provide more information about how to set up a simple directory?
Where is "memberof" data?
Whether you set up a simple people directory, and search people in SharePoint serach center, then you want to customize the hover panel of a poeple.
Please provide a screenshot about this issue, it will make others easy to find a solution for your issue.
There are some articles about how to customize hover panel in search center, please check if they are useful for you:
http://blogs.technet.com/b/tothesharepoint/archive/2013/09/17/how-to-display-values-from-custom-managed-properties-in-the-hover-panel-in-sharepoint-server-2013.aspx
http://www.sharepointnutsandbolts.com/2014/01/extending-SP2013-Office-365-search-hover-panel.html
http://sharepoint.stackexchange.com/questions/95243/modify-the-hover-panel-on-the-search-page
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Access local shared folder through Sharepoint 2013

Before we installed Sharepoint 2013 everyone within the company was sharing files and folders through a shared drive that is mapped to all the workstations. This shared folder on the server is very large, roughly 250gb in size.
I created a Sharepoint site called Document center using a Sharepoint template. Is there an easy way to either upload all those files and directories int sharepoint?
Or even easier, create a link on the sharepoint site that can connect to this shared drive so users can access these files.

You can use a data migration tool from a 3rd party, such as Metalogix, Metavis, AvePoint, or ShareGate to migrate file share content into SharePoint with the metadata (created by, last modified, etc.) intact. You can also use WebDAV (\\sharepointsite\) and
copy them in, but the metadata will be lost.
As far as integrating the file share into SharePoint, take a look at AvePoint's File Share Integration tool (http://www.avepoint.com/assets/pdf/doc6/DocAve_Connector_for_SharePoint_File_Share_Integration.pdf). This is the only one I'm aware of.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Problem connecting PowerPivot's (Office 2013) Data Model deployed on SharePoint 2013 to data source.

Hello:
Our configurations is as follow : SharePoint 2013 is on Server A; SQL Server Analysis server (SQL 2014) is on DB Server B;
SharePoint databases (sp_ ...) and our Data Mart (SQL 2014) are on server B. All servers runs Windows 2012 OS.
On my desktop I built a simple Excel 2013 workbook with PowerPivot Data Model that imported several tables from our Data Mart (server B above). Then created a Power View report. Locally everything works fine.
But when I uploaded this workbook to our SharePoint PowerPivot gallery and was trying to refresh data, I got the connection error: It’s very long but the ErrorCode is “rsCannotRetriveModel”. The end of the error message is:
'TemporaryDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source>
<Message>Call to Excel Services returned an error.</Message>
<MoreInformation><Source></Source><Message>We were unable to refresh one or more data connections in this workbook.
The following connections failed to refresh:ThisWorkbookDataModel</Message>
<MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>
We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh:ThisWorkbookDataModel</Message></MoreInformation>
</MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Our Excel Services on the SharePoint work fine and refresh data on different excel workbooks (with no Data Model) just fine. We are using an unattended account for Excel Services to connect from SharePoint server to our databases. Found a few references
on the topic, tried them but with no luck.
Please advise!
Regards
-Jeff
Jeff Gorvits

Hi Jeff,
Firstly, I need to confirm whether you are refreshing Data connection in browser, since Data Refresh is not supported in Office Web Apps. Please refer more information in this article:
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx
From the error "Call to Excel Services returned an error", please verify the location of the
data source, for example an Excel workbook, is registered as a trusted location with Excel Services:
https://technet.microsoft.com/en-us/library/jj219699(v=office.15).aspx
Since you are using unattended account for Excel Services to connect from SP to databases, I wonder if the issue occurs to unattended referesh, if so, please refer to:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx#Problems_using_the_Unattended_data_refresh_account
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Report Viewer control in sharepoint 2013 provider hosted app

sharepointSite/_vti_bin/ReportServer
We are migrating sp 2010 site to SP 2013 provider hosted app. we are using Report viewer control (version 10.0.0) in .net application app server, And the reporting service is configured in sharepoint site and report is uploaded in the document
library. We are using claims based authentication
ReportViewer1.ServerReport.ReportServerUrl =
newUri("sharepointSite/_vti_bin/ReportServer");
ReportViewer1.ServerReport.ReportPath = @"sharepointSite/_vti_bin/ReportServer?sharepointSite/Reports/Report1.rdl";
and am getting an error
ReportServerException: For more information about this error navigate to the report server on the local server machine, or enable remote errors]
[ReportServerException: The user does not exist or is not unique.]
[ReportServerException: Report Server has encountered a SharePoint error. (rsSharePointError)]
   Microsoft.Reporting.WebForms.ServerReportSoapProxy.OnSoapException(SoapException e) +82
   Microsoft.Reporting.WebForms.Internal.Soap.ReportingServices2005.Execution.ProxyMethodInvocation.Execute(RSExecutionConnection connection, ProxyMethod`1 initialMethod,
ProxyMethod`1 retryMethod) +770
   Microsoft.Reporting.WebForms.ServerReport.EnsureExecutionSession() +105
   Microsoft.Reporting.WebForms.ServerReport.SetParameters(IEnumerable`1 parameters) +163
   BP.SDC.eXPP.UIAppsWeb.UserControls.Baseline.ProgressDashboard.RefreshDashboardReport(Int32 userRoadMapDisciplineId, String roadmapSection)
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3804
Can you please help me to solve this issue

Hi,
According to your post, my understanding is that you had issues about the provider hosted app.
Per the error, the issue may be related to the permission issue.
For a better troubleshooting, we can check with the following steps.
To norrow down the issue, please create a new and clean app to test whether it has the same issue.
You can check the ULS log to see if anything unexpected occurred when you deploy the app and open the site page.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Flex mobile app - which data grid control to use?

Hi,
Trying to build my first Flex mobile app in FlashBuilder 4.6 and I need a grid control to display a 2 dimmensional array of 6 columns x 50 rows.
The user doesn't don't need to have any interraction with the grid except for scrolling the rows.
I was looking at using dataGrid component but adobe doesn't recommend it for mobile apps.
Is there a grid component that is recommended for mobile apps?
Thanks

Here it is.
// Show empty grid to start
private function initGrid():void
    const dataArray:Array = new Array(1);
    var values:Array = new Array(1);
    values[0] = "";
    dataArray[0] = values;
    grid.dataProvider = new ArrayCollection(dataArray);
// Build array and feed it to the grid - 50 rows x 9 columns dataGrid (grid)
protected function FillGrid():void
var rows:int = 50;
var columns:int = 9;
// rows array
const dataArray:Array = new Array(rows);
// Get rows
for(var row:int=0; row<rows; row++)
const arrLine:Array = [columns+1];
arrLine[0] = row+1;
for(var col:int=1; col<columns+1; col++)
   // columns array
   arrLine[col] = Math.floor(Math.random()*10);
dataArray[row] = arrLine;
// At this point the multi dimensional array is assembled, now we connect it to the dataGrid
grid.dataProvider = new ArrayCollection(dataArray);

<s:Panel id="tablePanel" x="519" top="91" width="470" height="400" color="#827259" fontSize="18" title=".">
<s:DataGrid id="grid" left="5" right="5" top="5" bottom="5" selectionMode="singleRow" initialize="initGrid()" fontSize="17" >

<s:itemRenderer>
   <fx:Component>
    <s:DefaultGridItemRenderer>
     <fx:Script>
      <![CDATA[
       override public function prepare(hasBeenRecycled:Boolean):void
        label = data[columnIndex];
      ]]>
     </fx:Script>
    </s:DefaultGridItemRenderer>
   </fx:Component>
</s:itemRenderer>
<s:columns>
   <s:ArrayList>
    
    <s:GridColumn id="zero"    headerText="N0" width="65" resizable="false"/>
    <s:GridColumn id="one"     headerText="N1" width="45" resizable="false"/>
    <s:GridColumn id="two"     headerText="N2" width="45" resizable="false"/>
    <s:GridColumn id="three"   headerText="N3" width="45" resizable="false"/>
    <s:GridColumn id="four"    headerText="N4" width="45" resizable="false"/>
    <s:GridColumn id="five"    headerText="N5" width="45" resizable="false"/>
    <s:GridColumn id="six"     headerText="N6" width="45" resizable="false"/>
    <s:GridColumn id="seven"   headerText="N7" width="45" resizable="false"/>
    <s:GridColumn id="eight"   headerText="N8" width="65" resizable="false"/>
   </s:ArrayList>
</s:columns>
</s:DataGrid>
</s:Panel>
Tomexxus

Access Services forms/views in SharePoint 2013

So, in my enterprise we're about to upgrade to SP 2013 from 2010, and Office 2013 from 2007. Should be a hoot!
I'm interested in learning more about Access Services. I undertand that Access Services forms, now called views, are based on HTML 5. Can we present an Access form/view in the browser that has conditional formatting like we're used to in InfoPath--the ability
to show/hide form sections based on conditions?
Thanks!
Leon
Leon Bryant

Yes. It is possible but not as flexible as InfoPath. We can still use Infopath BTW.
Please refer these link
How to Create Conditional Formatting
in Access 2013
SharePoint 2013:
Access Services
Creating SharePoint Forms with
Access 2013 Web Apps
The Pros and Cons of the Access App for SharePoint 2013
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Cant Access 10g Grid Control

Hi Everyone!
I just tried to start Enterprise Manager (Grid Control) on our 10g server (using the 'Application Server Control Console' icon from Windows), and Internet Explorer gives me a "page cannot be displayed" error, with "Cannot find server or DNS Error" as the reason.
From what I can see, the relevant services are running, but I'm not sure what else to check.
What can I check?
Many thanks.

Please post this question in
Enterprise Manager 10g Grid Control
Enterprise Manager
Is it a DHCP?
Adith

How to access the markup in a sharepoint 2013 list

Hello,
I would like to try word wrapping my column headers and try changing the column width in a list. How to I access the markup (html)? I do have Sharepoint Designer 2013 installed but I am not too familiar with it.
Also, Is there any way to add a block of text to a sharepoint list page explaining the list and how to use it?
Thanks!
Natalie

Hi Natalie,
According to your post, my understanding is that you want to make list column header word wrapping, change the columns’ width in a list and add a block of text to describe this list.
I recommend that you can follow the steps as below to implement it in your environment.
1. Open your site in SharePoint Designer 2013, click on “Lists and Libraries” in the Left Navigation, click on the list which you want to modify.
2. Right-click the “All Items” view of this list, select the “Edit File in Advanced Mode” option, add the following code under the <asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server"> tag, and save
the changes of the file.
<style type= "text/css">
.ms-vh, .ms-vh2, .ms-vh a, .ms-vh2 a
width: 30px;
white-space: normal;
text-align:center;
vertical-align:text-bottom;
color:red;
</style>
3. Open this list in your site, go to “List Settings”, click on “List name, description and navigation”, add some descriptions like “This is a test list~!”, and click on the “Save” button.
Then, you can go back to this list, and you will see the corresponding descriptions in a text box when you click on the “?” icon next to this list name.
The result is show as below:
For more information, you can refer to:
http://blog.pentalogic.net/2011/06/word-wrapping-sharepoint-list-column-headers/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+pentalogic+%28Pentalogic+Technology+-+SharePoint+Blog%29
Best Regards,
Yumi Fu

Get 400 error when accessing the Source from MySite sharepoint 2013

we retrieving the recent news feed from my site .Sometimes we are getting 400 bad request error.we have used rest json method toretrieve the item from my site?any idea to resolve this issue?

I'm not very familiar with Tuxedo unfortunately.
I recommend that you post here:
Could not get TuxedoConnectionFactory, setting up AP's incorrectly?
You could also start with the code here:
Where to Download weblogic.wtc.jatmi Library/Package
And follow the instructions here:
http://download.oracle.com/docs/cd/E21764_01/web.1111/e13756.pdf

PowerShell command To configure Access Service 2010 in sharepoint 2013 server

HI ,
can any body give reference for Powershell command for
Access Service 2010
I am currently able to run powershell command for
Access Service .
But in sharepoint 2013,Access Service 2010 is a new service, but i am not able to see any refernce blog for command.

Hi,
According to your description, you want to configure Access Service 2010 in SharePoint 2013 server by using a Windows PowerShell.
Take a look at an articles about configuring services and service applications in SharePoint 2013:
http://technet.microsoft.com/en-us/library/ee794878(v=office.15).aspx
Updates on how to do a lot of these (include
configure Access Service 2010 ) with PowerShell haven't really been released yet.
Here is an article about configuring a service application by using a Windows PowerShell script (SharePoint Server 2010), you can use as a reference:
http://technet.microsoft.com/en-us/library/gg983005(v=office.14).aspx
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Want Access Data Grid control in SharePoint 2013?

Similar Messages

Maybe you are looking for