Watching stars on demand and a 3d movie
I watched both iron man 3 and plans using starz on demand and my tv is turned on with the 3d settings but when watching the movies the screen cuts in half either you can pick horizontal pictures of the same movie or vertical how do I get the 3D movie to work and show me full picture?
shymedq87 wrote:
I watched both iron man 3 and plans using starz on demand and my tv is turned on with the 3d settings but when watching the movies the screen cuts in half either you can pick horizontal pictures of the same movie or vertical how do I get the 3D movie to work and show me full picture?
That is exactly how 3D is supposed to work, what kind of glasses do you have? Are the settings on your tv correct? (is your tv a 3D capable tv?) If you try to watch a 3D movie but your tv is NOT 3D compatable then you will get duel screens.
Similar Messages
-
Cant watch a Rented and downloaded a movie from Itunes on airplane
I recented read that I could rent and download a movie to my IPAD for viewing later. I did this and planned to watch on my international flight. When I tried to watch the movie Itunes wanted to connect over the internet 1st, since I had no internet on the plane I was not able to view my rented movie. Was there something I did wrong or do you have to have a wifi connection to select your downloaded movie from the Itunes library for viewing?
You do not need Internet access to watch on rental movie on the iPad if you are offline. Are you certain that the movie completely downloaded?
Assuming that the movie downloads completely to the iPad you do not need a WiFi connection to watch it. -
Yeah. Like the question states. I use to be able to watch my TV Shows and Movies in HD, but now it ain't working and I blame Maverick!!! UGH! LOL But anything helpful to suggest? That'd be awesome.
I apologize for the confusion. This was literally the only option on Apple's "Contact Us" section that I was able to access. I assumed that Apple's clear intent to have me go here instead of speaking with someone in live time, and the fact this is on the Apple website, meant I could get some advice... Both over the phone and online they require information I need to see my screen to provide so those are not options. I tried to bypass this when calling through Skype. Some lady who didn't know what was going on, who I waited a good while to speak with, put me on hold; I gave up after 30minutes of waiting to speak to somebody again.
I've stumbled upon a few tricks to help me get through this problem, but I'm at a loss. I need this phone to work until late December. I need more tricks. So yes, it's worth understanding. Knowing what is going on will let me Google it and work with it, if nobody here is willing to help...
And yes, it IS a glitchy phone. It has been a glitchy phone for a long time. Long before this. But completely unrelated issues. I was assuming this wasn't just a glitch but something maybe somebody could help me understand. -
I just watched a movie using my iPad 2. Now I need to know how to return and delete the movie from my Netflix queue and account using the iPad 2?
Perhaps this question would be better answered here:
http://www.netflix.com/Help -
I bought a movie on my iPhone and then went to watch on my mac and told me I needed to authorize my computer. How do I do this?
Open itunes, click the word Store at the top of your computer screen, then click Authorize
-
I have rented a movie on iTunes and it says I'm running out of time to watch but it is not downloading the movie can someone help
It does take some time for a movie to download, could it still be downloading ? Also the rental tab is only there when you have rented a movie. If all else fails talk to iTunes support, they have helped me in the past.
-
I'm trying to use the apple TV. I've hooked it up and found that any video downloading takes forever. A 1 minute video I shot yesterday took 20 minutes to download and watch on the Apple TV. A movie trailer took 20 minutes. Whats wrong????
I am trying to figure it out, I have done everything
I had this around the end of Jan for about a week then I did some changes in my firewall and allwas good ( or so I thought) for 2 weeks and now its back again since Friday ( thats when I noticed it)
I have done the following
refreshed my connection
speedtest
unpluged it
check my pc firewall again and added anything to do with Apple and itunes to the exceptions list
check my router firewall and settings myself and with my cable comp
I also called my anti-virus/Firewall tech supp and could not find a thing
youtube netflix work fine but streaming a 2 min 33 sec trailer from itunes takes for ever and I see the white bar downloading
I can stream TV shows but like 20 min for it to be ready sometimes an hour
I am also seeing downloads from itunes store for a 22 min show take 3 hours
I have tried everything on my part. even downloaded a show from zune that was done fast as itunes used be, infact Thursday it was working fine (Itune store downloads)
something is up with the itune store because there is nothing more I can do
I even have a signal booster in my living room to make sure the family room and kitchen get a good signal
my apple tv is in the next room where the modem is and router
I also am having the same download issues on 2 computers and a ApTV2 -
I rented Pacific rim yesterday in my Apple TV and watched part of it and them stopped. Now I am checking in my mac to watch the remaining part with iTunes but I cannot see the movie here.
Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals. -
How do I watch a previously rented and expired movie?
How do I watch a previously rented and expired movie?
As stated by apple
"You have 30 days from the time of rental to watch your movie, and 24 hours (in the US) or 48 hours (elsewhere) after you've started viewing to finish it. Once the rental period expires, the movie will disappear from your iTunes library."
The prossess will then repeat, you will have to buy again etc... -
I recently purchased a movie and let the movie download onto my Air. Then I went to watch it, and now iTunes has no remeberence of my purchase? It took the money out of my gift card also...
Sign in and out of Itunes and check your purchases, or if you merely rented it.
verify you used same account on purchase as you did to watch it.
if no resolution, contact Apple about your account issue. -
Firstly why is it so difficult to find answers to problems?!?!?!?!?!!?!?!?!?!?
Secondly
I have purchased and downloaded a movie but when I try to view it on my PC or my Apple TV it says that I haven't purchased anything, yet when I go into my iTunes account I can see my purchase.
Frustrating or what?!?!?!?!?!?!!?!?!?Details, please. Purchased from where, the iTunes Store? If so, does the movie appear in iTunes, and if it does what happens when you select the movie and click Play?
It's really difficult to offer advice with so little information to go on, so please post back and give us the complete situation. We can then probably come up with suggestions.
Regards. -
I downloaded one movie and rented others, when I open iTunes and select the movie it says downloaded, but I have not figured out how to play the movies!
Hello there, Starbrute11.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Deskjet 712C: Ink cartridge got stuck in right side and won't move
I have an old DeskJet 712C that was working fine until today. Strangely, the ink cartridge got stuck in the right side of the printer and won't move. As soon as I turn on the printer, the red light starts blinking. Does anyone know any tricks to get the ink cartridge to move again? Thank you for your help.
This question was solved.
View Solution.Hi,
It may be possible to move the carriage if you turn off the printer. Unplug the printer and open the printer lid. See if you can move the carriage by hand. If this is possible move the carriage to the centre. Check to see that the is nothing blocking the movment of the carriage - e.g. some pieces of paper.
Close the lid and then plug the printer back in. Hopefully this will help.
I did find a You Tube video which shows fixing carriage jams on C4200 printers ( I know that they are not the same as the 712C) but some of the suggestions may be useful if my initial thought above do not help. the video is at this link:
http://www.youtube.com/watch?v=l9x6ZLIYMog
Again these tips are not specifically for your printer but they may help solve your issue.
I hope that this was helpful.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you. -
Iphone4s and iCloud/Apple Movie Trailers app stuck in loop using battery on wifi
This one is a long story and took me a day or so of looking around to figure out. I don't know if it causes all the battery drain issues, but it was at times causing some usage on my 4s.
Background:
I use my mac as an iTunes server - always running - so AppleTV can reach it etc via homesharing. I have a TimeCapsule too and a neat feature is wake on demand proxy where if the the mac is set for wake on demand and it is a sleep, the AppleTV will wake it via the proxy. Works great. Even the iOS remote apps will wake it. Anything requesting a bonjour service that is active on that sleeping mac will wake it. All was good.
Then one day, I noticed it waking in the middle of the night - whenever the iPhone turned on with a notification. I thought that was weird. I quit the apps. hard reset, etc. Still occured. I could put the mac to sleep and just turn on my iPhone and it would wake. Note I have an iPad and it did not exhibit this behavior. I gave up for a few days. Mac would go back to sleep after 10 minutes so no big deal.
Side note I also have wifi sync OFF. I had it on for itunes syncing but noticed that iTunes maintained a constant connection to the phone even when not wired so you can drag and drop to the phone etc. So to be sure that was not draining battery, it turned it back off. It also would wake on demand when it was enabled so I knew it wasn't that setting causing the issue.
Investigation:
I started with netstat and my airport logs. I found my mac address, ip address, and then found when I turned on the phone a connection established everytime to port 49166 on the phone. It would create a connection everytime the phone turned on.
I used 'sudo lsof -i -P' to find the process opening the host port on the mac to that phone port. It was 'ubd'. Looking that up on google, I found it was the Ubiquity process. I also found that it had a log in '~\Library\Logs\Ubiquity'. Looking at the log, I found the following occuring whenver I turned on my phone and usually very few minutes while the phone was on:
[ERROR] 99090c4718 [11/11/22 09:50:34.347] {D2650C3E} 264.connect-https://xxxxx-xxxxx-iPhone.local.:49166 parse_cert_challenge:608 signer 0: com.apple.idms.appleid.prd.4243556669426c674b3255694250464d4d41395633513d3d
[ERROR] 9911fa663c [11/11/22 09:50:34.497] {D2650C3E} 264.http_runloop client_received_error:401 client 0x7fa868433850 error The operation couldn’t be completed. (OSStatus error -9801.) userinfo <CFBasicHash 0x7fa86862e5b0 [0x7fff74f3af40]>{type = immutable dict, count = 0,
[ERROR] 9911fa663c [11/11/22 09:50:34.497] {D2650C3E} 264.http_runloop client_received_error:401 entries =>
[ERROR] 9911fa663c [11/11/22 09:50:34.497] {D2650C3E} 264.http_runloop client_received_error:401 }
[ERROR] 9911fa663c [11/11/22 09:50:34.497] {D2650C3E} 264.http_runloop client_received_error:401
[ERROR] 9b655ad834 [11/11/22 09:50:44.486] {D2650C3E} 264.ubd-main-loop save_local_state:5772 NOT saving identity 0: 'com.apple.idms.appleid.prd.4243556669426c674b3255694250464d4d41395633513d3d' of type 2
[ERROR] 9d5e1dfa80 [11/11/22 09:50:52.954] {D2650C3E} 264. shutdown_file_transfers:714 cancelling any pending ftrs from peer 0x0003
I assumed those 401 errors were http errors. The logging would kick in whenver the phone was turned on. I figured a loop like that must be using battery at least on wifi. I don't think it does this on 3g. I didn't know if this was related to the wake issue but it was the only clue.
I found a macworld article on problems with iCloud/Ubquity causing a hang. I didn't have a hang but I wondered if there was a file sync of some sort going on. I remembered reading somewhere that on OSX, documents for sync are kept in '~/Library/Mobile Documents'. So I looked there. I found one file called '43LU875E5~com~apple~movietrailer' and a hidden directory called '.ubd'. which has files with names and id's that matched some early parts of the log.
I was at a loss. Since it was a connection problem, I took Safari on OSX, turned on the phone, and connected to the https address in the log. Sure enough, I got messages from keychain to add roots and ccerts etc. Did this and eventually got an error returned. But it did connect which meant the phone was running a web server. Neat. And ubd wanted to connect to it and couldn't and was going to keep trying forever.
Since the only clue I had was the movies trailer data file, I went to my iCloud control panel and sure enough there is a movies trailer data file in iCloud (along with my ipad and iphone backups). So I tried to delete it . iCloud returned an error and could not delete. OSX console log showed an http 500 error.
So, I figure not much else to do, so I delete the app from my phone and my ipad. It even gives a nice warning when deleting that you have a file in iCloud that you may want to delete. Unfortunately, I still couldn't.
Final Testing
After deleting the app from the phone, I checked the ubiquity log. I could turn on and off the phone and it would no longer create the log entries, no netstat connection, no web server running anymore. I put the mac to sleep, and turned on the phone, It would not wake it up. Repeated test. Passed. Opened the Remote App and it woke up the Mac as expected. Everything was back to normal and I no longer had a looping connection between my Mac and my phone. Note - this occured even when the trailers app was shutdown on the iphone. This appeared to be an iCloud sync issue.
Final Thoughts
- This did not occur with my iPad and it had the same app. I deleted it there to be safe.
- I have no clue how much battery this uses. I have pretty good life most of the time and my assumption is no matter what, it would help to turn this loop off. It was really the waking the mac all the time that had me bothered. I just stumbled on a bigger issue.
- I doubt the problem is occuring all the time. My ipad did not have the issue, only the iPhone. It was likely an anomoly that showed up and may or may not occur. I thought posting the experience and if anyone else is having similar problems this may help. I am not advocting that everyone remove the app. Just take a look around if you are using the app and are seeing issues.Thank you!!! Thank you!!! Thank you!!! Thank you!!!
Hallelujah!!! Thanks for the correction (fat fingers, as you suspected).
Now to the good news. I started Safari, then pasted the URL in and pressed Enter. To my utter amazement the quicktime "Q" logo appeared briefly, then a "screen" box in the window and the movie itself began to load. After a short while it began to play, just like it should!
More good news. The exact same technique worked in Firefox as well!
Now the not-so-good news. When I enter the URL in Quicktime Player "Open URL", the player window opens showing the audio and video controls but no "viewing screen". I let it run for about 5 minutes and nothing ever appeared. I must qualify this by saying that right now my wireless connection is running very slow, so I will try QTP again when things are moving faster.
Believe it or not, this is the very first suggestion I tried that actually made a noticable difference. Of course, this is still a workaround (which I will gladly use). Hope there is a permanent resolution to this somewhere.
BTW, I plan on downloading and re-installing OS X 10.5.2 using the "Combo" package. My original install of both 10.5.1 and .2 were done via "Software Update" and this is the only other suggestion I've seen that might resolve my issue. My plan is to do the re-install only on the G5. If it corrects the problem there, I'll wait a week and then do the same with my MacBook.
In either case I will let you know the results in a follow-up post to this topic. -
I had all my old home video's and super 8 movies converted to DVD's. Since I will move back to Europe I asked the company to convert them to PAl system. I just got all the DVD's for a lot of money, but I can not play any of them on my MAC book.(I think that is because they were burned on zone 1 dvd's and my lap top works with zone 2.
I wonder how I can make them work on my macbook..? I intended to start editing those movies so I need to be able to play them on my mac. Is there a way to copy them to zone 2 DVD's and or to zone 0 dvd's and where do I get those free zone or zone 1 recordable dvd's?
ireen 1 min agoWelcome to the Apple Community.
The Apple TV 2 will play all the content in your iTunes library that your Apple TV 1 does. It can no longer sync any of it but can stream it all just as the older model did. Airplay is a different feature that lets you stream from an iPad/iPhone, the Apple TV 2 has Airplay the first didn't.
You can still sort and search content by genre, it still marks content watched and unwatched and mainly still lets you organise much as the Apple TV 1 did, with one exception. It doesn't do nested folders, so the ability to tag a movie as a show (ie James Bond) and have all the associated movies in a James bond folder has gone and it lists all these movies individually.
It has a similar situation with TV shows. It will put all TV shows in a series in a folder as the older one did, but the new one lists each series separately whereas the older model would put all the series in one folder.
Not nesting folders is a bit of a pain with large libraries and whilst I don't like it, it's more or less the only compromise I have to make and of course I get additional features too.
Maybe you are looking for
-
Major issues with iphoto 09' v 8.1.2
I am having a lot of dificulty with iphoto and one of my issues is that my photos are showing that they are very poor quality (65kb) but my camera is not even capapble of taking such poor quality. (Canon SX20is) Is there any way to restore the origin
-
Show OrderType along with name in Display purchase order
Hi All, When we display purchase order via transaction ME23N, first field on the top left hand corner shows description "Purchase order", "Production order" etc..... Here I would like to see order type (ZB,ZR,ZV etc) along with description. There is
-
HT4623 When will the iPhone 5S come out?
Does any body know when the iPhone 5S comes out? What is the difference.
-
Get IE8 to display Flash content
Does anyone have a bullet proof method for embedding Flash content so that it shows in all flavors of IE8 WITHOUT having the user change settings on their machine? I'm working on a project that was tested by a couple of people who could see the conte
-
Active X bringing a graph from excel to LV
Is there a way to display an excel graph in labview. not just data but actual graph with functionality like rollover display. I feel like this could be done with active x but im not sure how to get it done. Thanks, Triff