Web reports password

Hi everybody.
I have a problem with web reports. In the web reports page I have a link with information about each report. The problem that Im having is that every time the user clicks on tthis link, it asks them for their password again. This link is in ppt form, and is in a server. The user enters their password whenever they access the reports page, and then they have to type it again to access those links. Does anybod know how to avoid this?? thank you

NO. Dont hard code uid/pwd for this scenario. what you require is SSO2 to be enabled. What it does is, it will as for uid/pwd for the first time during the browser session. after that it will remember authentication information till the browser is closed. that means within the same browser session for each link click it wont ask you to authenticate.
how to enable.
go to transaction RZ10 (you may not have authorization - this is generally done by basis people)
and maintain the following profile parameters (instance)
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 1
after this is done. the application server needs to be restarted. and then run bsp page system/sso2test.htm to check whether its configured properly.
Now try your application.
Do let us know how it goes.
Regards
Raja

Similar Messages

Web report without userid and password

Hi Experts,
I exported a BW web report to excel spreadsheet and sent it through mail to others, When recepients tried to open that exported spreadsheet, It is prompting for userid and password. I dont want this to be happened and it should open without asking userid / passsword? Can any one suggest some clues onthis.

Check to see if they are looking at the data or running the report. If they are running the report, then they will be prompted for the user id and password.
You can run the report for them and download the data only, then they will not get the prompts, however they will not be able to update the data or drill down.
Alternatively, you can use the Broadcaster to send out the updated reports directly to them.
Brian

Web reports prompts me to input username and password in bw

Hi all.
When I access web reports from bw.
It will open a IE, then go to one url ( which is located in ITS ), and IE prompts me to input a valid username and password.
Its very strange, because I have already logged on that BW.
Is it possible to avoid this prompt ?

Gu,
Can you give us the URLs that you are using , is it that the URLs are different ?
The URL is usually
http://<yourserver>:port/sap......
assuming that the URLs are
URL 1 ( which is currently opening in IE )
http://<yourserver1>:port/sap......
URL 2 ( for which the login is being asked for)
http://<yourserver2>:port/sap......
if yourserver1 and yourserver2 are different , then a logon is required.
Hope it helps..
Arun
Assign points if useful

Analysis Authorization in BO 4.0 Webi report

Hi All,
I am using BO 4.0 and creating connection from Information Design tool to a BW query using BICS client. This connection is then published to CMC.
We are using SAP authentication and importing the roles from BW system. We have added profiles to this role and these profiles have Analysis Authorization set on Company Code. So one user can access data to one company code and vice versa. Now this works well in Bex Analyzer, but if I try to create a report in Webi, the analysis authorization fails. I went through the forum before posting this question and I found that is in 3.1 version and in most cases using SSO in universe connection solved the problem.
However in 4.0 I am using BICS client and followed the same processes to create a connection but for some reason it doesn't work ? Is this suppose to work differently in 4.0 ?
I have tried:
1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
3. Publish the connection to CMC with my Enterprise and SAP ID and in both cases it doesn't work.
Please let me know if anyone encountered a similar issue and what is the best method to resolve this.
(BO 4.0 no service pack or fix pack installed on the system yet)
Thanks - Appreciate your help !
Prasad Rasam

Ingo,
1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
>> Correct you need to setup you OLAP Connection with SSO.
>>> What I meant was I created the connections using both the methods, Using SSO it allows me to create a connection. The ID which I am using to create a connection has Admin access to BOBJ system. When I login as a regular user to create a Webi report and select this new connection, it throws an error message 'The DSL Service returned an error: com.businessobjects.dsl.services.workspace.impl.QueryViewAnalyzer$CannotGetCubeFromConnectionException: Cannot get the cube from the connection'
Using the other method to create a connection with User ID and password, I can create a connection and with the normal user login I can connect to the BW query but Analysis Authorization doesn't work.
Ingo : Could you be more specific what you mean here with the different users ? When you say "regular" user are you referring to an SAP credentials or SAP BusinessObjects Enteprrise credentials ?
2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
>> The variable in the BEx query needs to be an authorization variable.
>>> This has already been set as Authorization variable. There is still a question here. If I select the variable as Authorization variable, I cannot set the other parameters in the query properties such as Mandatory variable (as this is greyed out).
Ingo : What other parameters would you like to configure ? Could you perhaps describe the scenario with more details ?
regards
Ingo Hilgefort

Linking a WEBI report through hyperlink in a webpage using open document

Hi All,
I have a hyper link in a web page which when clicked should open a WEBI report. I created it using the open document feature.
Once clicking on the link, InfoView login credential page is displayed. After logging in the report runs.
My client does not want the login page to be displayed since most of the users does not remember their password (since SSO is implemented).
He wants to bypass this login page so that most of the users can directly view the reports.
Question:
Is there a way to achieve this i.e without asking for login credentials or by passing this?
Possibilities :
1: To create ID's for all the people (which I think is not a feasible option in my project)
2: Create a guest account with minimum privileges and share the password with all the users.
Note:
1: I use BO XI R 3.1.
2: No SDK is installed to do any programming.
Any suggestion are most welcome.
Thanks in advance
Shreyas

Hi Shreyas,
Manual Easy Way for doing the activity in SAP Business Objects 4.0:
This method is useful if we have a special system account that we want everyone to use.
You will notice that all we do is generate a logon token using the appropriate username, password and CMS variables. Then we append the token onto ivsLogonToken.
Note: The numbers on the url after /BOE/portal represents the timestamp of the last patch or install. You can put whatever you want under the number section and Business Objects will automatically redirect to the appropriate start.do
Step I:
Go to the SAP BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\eclipse\plugins\webpath.InfoView directory and edit custom.jsp
Step II:
You can copy the contents from the custom.jsp that I’ve provided below to your custom.jsp.
Cutom.JSP File
<%@ page import="com.crystaldecisions.sdk.exception.SDKException" %>
<%@ page import="com.crystaldecisions.sdk.framework.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.infostore.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.security.*"%>
<%@ page import="java.net.*"%>
<%@ page import="com.crystaldecisions.enterprise.*"%>
<%@ page import="com.crystaldecisions.sdk.plugin.admin.*"%>
<%@ page import="java.sql.*"%>
<%@ page import="com.businessobjects.webutil.Encoder" %>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<%
//BO Session and redirect to Infoview
IEnterpriseSession enterpriseSession;
/* * Set Enterprise Logon credentials. */
final String BO_CMS_NAME = "bi4server";
final String BO_AUTH_TYPE = "secEnterprise";
final String BO_USERNAME = "Daya";
final String BO_PASSWORD = "admin@123";
ILogonTokenMgr logonTokenMgr;
String defaultToken = "";
* Log onto Enterprise
boolean loggedIn = true;
try {
//Create session token
enterpriseSession = CrystalEnterprise.getSessionMgr().logon(Daya,admin@123, BI4SERVER,Enterprise);
logonTokenMgr = enterpriseSession.getLogonTokenMgr();
defaultToken = logonTokenMgr.createWCAToken("", 20, 1);
//Redirect with token attached to the ivsLogonToken parameter
response.sendRedirect("http://"+BO_CMS_NAME+":8080/BOE/portal/1205291547/InfoView/logon/start.do?ivsLogonToken="+Encoder.encodeURL(defaultToken));
catch (Exception error)
loggedIn = false;
out.println(error);
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
</body>
</html>
Edit the username,Password & BOBJ Server Name'in BOLD Letter
Step III:
Stop tomcat, then delete contents in the SAP BusinessObjects\Tomcat6\work directory.
Then start tomcat again and the work directory will be regenerated with new code.
Step IV:
Trusted Authentication:
Trusted Authentication is a component of Enterprise authentication that integrates with third-party single sign-on solutions, including Java Authentication and Authorization Service (JAAS). Applications
that have established trust with the Central Management Server can use Trusted Authentication to allow users to log on without providing their passwords.
This method is really cool because users don’t even have to know their passwords. Basically with this method you can log into another system and if that system has the appropriate user name, you can pass it to the custom.jsp and then it will log you into BI Launchpad.
In addition, you don’t need to create any java code for the enterprise token setup.
Step V:
In the CMC, go to Authentication, then select Enterprise. Check Trusted Authentication is enabled, then click on New Shared Secret. Finally download the shared secret key and keep it somewhere secure
Step VI:
Copy global.properties from <INSTALLDIR>\SAP BusinessObjects Enterprise XI 4.0\warfiles\webapps\BOE\WEB-INF\config\default into <INSTALLDIR>\SAP BusinessObjects Enterprise XI 4.0\warfiles\webapps\BOE\WEB-INF\config\custom. Then using Notepad or another text editing utility, edit the following properties
sso.enabled=true
trusted.auth.user.retrieval=WEB_SESSION
trusted.auth.user.param=UserName
trusted.auth.shared.secret=<secret code from properties file you created in step 2>
Step VII:
Go to the SAP BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\eclipse\plugins\webpath.InfoView directory and edit custom.jsp
<\!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page language="java" contentType="text/html;charset=utf-8" %>
<%
//custom Java code
request.getSession().setAttribute("MySecret","32efbfbd35efbfbdefbfbd4363efbfbdefbfbd694aefbfbdefbfbd227530efbfbd5742efbfbd13efbfbd2befbfbd1fefbfbdefbfbdefbfbdefbfbd4e49efbfbd41550cefbfbd15703619d8b8efbfbd6cefbfbdefbfbd57efbfbd0defbfbdefbfbdefbfbd0605efbfbd6dc59b2728efbfbd");
request.getSession().setAttribute("UserName", "Daya");
%>
<html>
<head>
<title>Custom Entry Point</title>
<script type="text/javascript">
function goToLogonPage() {
window.location = "logon.jsp";
</script>
</head>
<body>
<a href="javascript:goToLogonPage()">Click this to go to the logon page of BI launch pad</a>
</body>
Edit the username(Daya) variable
Step VIII:
Stop tomcat, then delete contents in the SAP BusinessObjects\Tomcat6\work directory.
Then start tomcat again and the work directory will be regenerated with new code.
Hope this help you as well.
Thanks,
Daya

Webi Report on BW Universe works in DEV but not properly in TEST

Hi,
We have created a Webi-Report on a BW Universe on our DEV server. Everything works like a charm and we are prompted as the first thing for keydate and the report is refreshed successfully. We then export the Universe (no connection overwrite) and Report to our TEST server with the Export Wizard and the problems start.
When we refresh the report on the TEST server we are prompted for keydate. If we select a value for the date we receive an error:
A database error occured The database error text is: The MDX (and then some MDX) failed to execute with the error Specify a value for variable Financial Statement Version. (WIS 10901)
If we select Use default value the report refreshes but no currency conversion is done. We can then refresh the report again and this time if we select a value for the keydate the report refreshes without the above error.
We have tried to overwrite the connection during export from DEV to TEST so the connection points to our DEV BW Server with the same result. If we create the universe on the TEST server from scratch everything works as intended.
If we transport the Universe and report from DEV to PROD directly the report works as intended.
The BO user (SSO WinAd) testing this have admin rights on BO. The connection in the univers to BW is done using a fixed username and password (no SSO to BW)
I am now out of options and would appreciate any input you might have to solve this problem.
Best Regards,
Lars

Hi Wavery,
Thanks for your reply. I have checked the connections and they are named exactly the same on DEV/TEST/PROD. I have also tried deleting the universe, connection and report on TEST and then do a new transport of all of them from DEV to TEST. Same result.
What I don't understand is why the refresh works if I do it in two steps:
<OL>
<LI>
I set keydate to "use default value" when prompted and the report will refresh without the keydate dependent calculations. None keydate dependent measures are showing correct values from BW.
</LI>
<LI>
Then I refresh again and set the keydate to a date and the report refreshes with the dependent calculations.
</LI></OL>
This tells me the connection is working and the problem is somewhere else. At the moment I'm clueless
Any input is highly appreciated.
Thanks,
Lars

WebI report not refreshed after BW pwd change - SAP EP-KM asPoint of entry

Config:
BOXI3.1 SP3 FP3
INTG. KIT SP3 FP3
BW 7.01 SP5
SAP EP 6.0
Imported all transports
Configured BW Publisher
Configured SAP Authentication in CMC
Imported required roles in CMC
Imported KM Par file in Portal
Issue:
Users logon to EP with SAP BW credentials and clicks on a webi report within KM with Infoview structure -> report is executed and can be refreshed successfully.
User forgets his pwd and the security team reset his pwd
User logon to SAP EP with reset initial pwd and gets a prompt to enter new pwd -> new pwd chosen and logon successful -> clicks on a report within KM with Infoview structure -> report pops up but can not be refreshed as an error msg below pops up
A database error occured.
The database error text is: Unable to connect to SAP BW server Name or password is incorrect (repeat logon). (WIS 10901)
Temporary solution:
Logon to Infoview directly and login with SAP account -> report executed and refreshed successfully -> Logout
Then go back to EP to execute report and since then works fine but issue occurs again if pwd is changed and logon to Infoview directly process have to be done to move on.
Has anybody had these issues or have an idea what config might be missing?
Please note that SNC was not configured as we are not using AD for logon or report bursting for now. All docs read have specified that SNC is not required for my scenario.
Also certificates have been established btw BW and EP and SSO works well with BEX queries deployed thru EP.
Any ideas will be appreciated.
Thanks,
Norita

More info -
If I clear the error msg and continue to click on refresh values in prompt screen multiple times then the bw account gets locked in SAP BW backend.
Please note that the universe was created to use SSO authentication and no user credentials hardcoded.
FQDN are also used for all the configs.
Has anybody encountered these issues before? Please let me know if you have any ideas or pointers.
Thanks,
Norita

Error in Creating a WebI Report on SAP Source using Rich client in BOxi 3.1

Hi
I tried to create a webi report using rich client on sap source. I get a error message " A Database error occured. the Database text is 'unable to connect to SAP BW server name and password is incorrect(repeat logon) (WIS 10901) .
SAP Integration kit installed
BO XI 3.1 is installed on windows server 2003
Application server - Tomcat 5.5 server.
Any configuration or sap files/folders should be added?
how can I move forward to solve it ?
Thanks!
J.M Raj

Hi
Ya I used SAP authentication - then also get same error.
Connections are created with username, password to access SAP Source
Thanks!
J>M>Raj
Edited by: John Milton on Jun 25, 2009 10:03 AM

Error occured while refreshing webi report in bi system

Dear Experts ,
please look into my problem
While refreshing WebI report in BIDEV system, we are getting the following error. The problem occurs only while refreshing the report.
ERROR: a database error occured. the database error text is unable to connect to sap bw server incomplete logon data.. (wis10901)
Regards

HI ayur
In the universe connection if the username and password is hardcoded then make sure those username and passwords are correct.
else
Make sure you are in the right BOX, for example if Universe is pointed to Prod, and you execute the report associated with that universe in the Dev, then that error will show up. So in universe connection find out to what BOX(dev, test, prod) it is pointed to and login to webI in the same BOX as universe pointed to and execute the report.
It should work, if not please let us know.

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

Error (IES10901) (WIS 10901) while refreshing the Webi report

Hi Gurus,
We have created webi reports using Universe design tool on top of BEX Query based on 0SD_C03 cube and now we are facing Database error: A runtime exception has occured. (Error loading cube 0sd_c03 (catalog : % 3). (IES 10901 ) (WIS 10901) while trying to refresh the Webi report from Data Access--> Edit--> Run Query while its running fine when I refresh the report using refresh button option in Webi.
When I run the the query in rsrt its working absolutely fine.
Note that we are using BOBJ 4.0 SP7 and this issue has come recently.
Any idea or help on this would be appreciated.
Regards,
Monil

Hello Monali,
are you getting this error constantly or sometimes?
what type of connection are you using for your Webi report
Is it Specified user name/password OLAP connection or SSO Olap connection
If your are using Specified user name/password OLAP then try with SSO connection because SAp recommendation is not to use Specified user name/password OLAP connections..to resolve this kind of issues please restart DSL bridge..
Regards,
Naveen D

Error FTP'ing Webi report

Hello,
I scheduled a Webi report to be FTP'ed. I got the below error:
Error Message: A database error occured. The database error text is: The SAP SSO authentication process will fail because the current user doesn't have an alias that matches system DB1CLNT100.. (WIS 10901)
The system is XI R3.1 (no SP or FP) against SAP BW.
When I schedule the Webi report, I have to supply the FTP server credentials including username and password. Does this username and password have to exist in SAP BW as well?
Thanks.,
Nikhil

Hi Praveen,
As you have mention the Error, it is related to database. Try to double check with the ODBC / TNS name connection depends on which database you are using. For Oracle: TNS name connection and SQL: ODBC connection where you need to setup the connection, and close the application and restart .If you still find the same error then need to see you database administrator. Hope this info might helpful.
Thanks
Regards,
Rajkiran M

How to make Management of row level restrictions easy for webi reports?

Hi all
Our BO Product version is 12.3.0.601 (BO 3.1)
We are applying row level security for webi reports at universe level...
Since Universes are more in Number we have to create same restrictions and apply it to the users lets take a restrictions on region....which is common across all universes.
So the problem lies with the management of restrictions created at universe level.
Can we have a setup in where we can centralized the restirctions at a place so that management would be easy ......???
Shall we have to import the roles(restrictions) from R/3 or BW or Database level...?
Then how we will restrict our report (webi) to a region?????
So basically webi reports should run with the restrictions lets say region....How we will achieve this?/
Thanks and Regards
Ritu Raj

Hi,
what is your Datasource?
If its SAP BW i would highly recommend you use the SAP Authentication in your BOE XI 3.1 So the users log into BOE with their SAP Username and Password and than the Data restriction of your BW takes place when the users run their Reports.
Informations on how to confiure the SAP Authentication you will find in the installation Guide of the SAP ITK.
Regards
-Seb.

Company code restriction for dashboard and webi reports in BOBJ

Hi Friends,
We have a requirment where we need to restrict user on company code level in bobj.
we have some dashborads and webi reports which need to be restricted at company code level, hence i have created a role in BI and restricted the queries (bex queries) on company code level and same role and user i have imported in BOBJ.
Now i can see the role and user in BOBJ and also i can login to BILAUNCH PAD with authentication as SAP But unable to run the webi reports and dashboard hence i have added those reports to this user in bobj and now i can run the reports, but restriction is not working.
In BI I am able to restrict user but in bobj its not restricting. kindly let me know if i am missing anything?
We are having BO 4.0 SP6.
Thanks
Basis

Hi Saurabh,
In BI its wokring perfectly fine.
I can run the query for specific company code and data is being populated as the respective compay code.
I have also configure SSO between BI & BO using below link
http://wiki.scn.sap.com/wiki/display/BOBJ/How+to+setup+SSO+against+SAP+BW+with+SAP+BO+BI4.0+Common+Semantic+Layer+%28UNX%29+or+BICS
but when i am trying to create a olap connection in IDT with SSO connection test is getting failed with belwo error.
com.businessobjects.mds.olap.OlapException: [Internal] SSO token or User password is empty.
I checked STS is already there in APS .
Thanks
Basis

Issues faced after integrating WebI report to C4C

Hi All,
I have Integrated a WebI report in C4C by creating an HTML mashup with report URL.
I Added the mashup as a new facet in Customers->Accounts.
Expected behaviour: The report should be visible in the new facet.
Issue: While using the HTML version of tenant, when I select this new facet I am redirected to the WebI portal
Is this the Expected behavior? If not, how can I prevent this from happening?
Thanks and Regards,
Manasi

Hello Experts,
Attaching screenshots of my issue.
Mashup details
2. In Accounts, went to adaptation mode->Edit Screen and added TESTWEBI as a new facet
3. Switch to HTML5 link of the tenant. Navigate to Customers->Accounts->TestWebi
4. We are redirected to WebI portal
What could be the reason for this behavior? I tried the same steps with a Bex /BI report and there was no such issue. On load of the page I got a popup asking for uname password and the report loaded as an anscreen component on the page.
But any WebI report, whether generated from Bex query or other data sources is causing this issue.
Any thought on why would this issue occur would be very helpful.
Thanks and Regards,
Manasi

Web reports password

Similar Messages

Maybe you are looking for