Weblogic preventing financial reporting and RAF from being accessed

Hi all,
11.1.2.1 (linux)
Web logic has financial reporting and RAF in ADMIN mode which is preventing them beign accessed. All other components are fine. The web server config step succeeded and both products were listed as being configured. I logged into the weblogic admin console and saw all products had a status if RUNNING except for FR and RAF. I tried shutting them down by force and starting them but it restarts, after a minute or so, in ADMIN mode. I have checked the startup mode and it is set to RUNNING.
I have checked the weblogic logs and I can't see any indication of the cause.
Has anyone experienced this?
Thanks,
Nathan

Refer :
http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/ch15s05s02.html
for more details about command line scheduling

Similar Messages

HT201270 My iPhone was stolen. I have asked the phone company to block it. Do I need to do something to protect my data in my iPad and Macbook from being accessed by the thieves?

Do I need to do anything to stop the thieves from having access to data in my iPad and Macbook?

Hi James
Thanks for your response. I didn't even know I should do this. I stopped using a pin number to use the phone cos it was a nuisance to answer calls.
The phone has been locked by EE/T-Mobile and I have checked with Find my iPhone and the phone is not connected/not even on.
You're right about changing passwords. Will get cracking.
Nooraini

Prevent apps and icons from being rearranged or deleted?

Is there a way to prevent apps and icons from being rearranged or deleted?
My three year old son likes to move them around and delete them. I don't want to lock him out because he loves to play many of the learning apps and games.

I use different screens for my apps. My 6yo son has his own page with folders for games, education, and books. That is the default page, in case for some reason he's the one to turn on the phone it goes straight to that. The next page is default apps. Can't harm them. Then I've got some test apps, that I haven't decided if I'll keep them. Then there's a few games my DH plays. The last page is mine, with those things I don't want my son messing with. He knows its there and he knows he can't mess with them.
My son is older than yours, but if you aren't going to be watching him the entire time he's got your phone, that may be the best way to go. And make sure he knows what he can and can't do on the phone. If he can't understand that, he will probably need to be supervised the whole time. No locking features that I have found, and I've looked!
Good luck!

Does anyone know of a VI or how to go about writing one that will prevent the computers time/date from being disabled while an application is running.

Does anyone know of a VI or how to go about writing one that will prevent the computers clock/time from being disabled while an application is running. The time and date can normally be reset while an application is running by clicking on the time/date in the lower right-hand corner of the computer screen. I have an application that runs over several days and it is critical that the time and date of the computer not be changed. Is there an easy way to lock this out from the user? Note that I am what I consider an advanced beginner in LV.
Thank you,
Chuck
Solved!
Go to Solution.

That is not something you can do from LabVIEW, as it is an operating system operation, and it will depend on the operating system that you're using. On Windows you can use a group policy to control this. Please Google on "prevent time and date change in windows".
Also, please try to refrain from stuffing your entire message in the subject block. Keep the subject short, but descriptive enough so it can be understood what you are basically asking. Thanks.

In windows live photo gallery it says an error is preventing the photo or video from being displayed

in windows live photo gallery it keeps saying an error is preventing the photo or video from being displayed

Hi Frank.
Thanks for the response.
Agreed, the pertinent question is why can't my colleague edit the JPG exported by Aperture. It's probably also worth pointing out, the same problem occurs with JPGs exported from iPhoto.
The Windows software usually plays nicely with JPGs by all acounts, just not the ones I send - which I do via eMail or my public space on Mobile Me incidently.
So, another key question is: all settings being equal (color profile, quality, etc.) are the JPGs as produced by iPhoto and Aperture indistinguishable from those produced by other apps on other platforms - i.e. does the use of JPG enforce a common standard?
If that is the case, I suspect ours might be a permissions issue.
According to the Microsoft support page on editing in Windows Live Photo Gallery, the inability to edit a picture is commonly caused by unsupported file type, or read-only attribute set on the file.
Unfortunately, he and I are not in the same place, and he's not particularly au-fait with this type of problem solving. Hence, before involving him, I'd like to know:
1. it's possible (i.e. someone else does it), and,
2. what's involved (at my end and/or his).
Thanks again,
PB

How does one prevent a folder's contents from being read while running in target disk mode?

I want to prevent a folder's contents from being seen or used by a second computer that is connected to my iMac when it is running in the firewire
target disk mode. Whenever I put my iMac into the Target Disk Mode all of its disk contents, for all users on its disk, can be seen and used by the second computer without needing any passwords. Does anyone know of a simple way, short of using FileVault, for protecting folder contents when viewed while running in the target disk mode? I would like to protect the entire contents of my "Documents" folder from being viewed by anyone that connects to my iMac via the firewire target disk mode.

Many users make a password protected Disk Image using Disk Utility to keep selected files protected. I have one such image myself that I keep on my Desktop containing passwords and such. I'm not sure if you could put the entire contents of your Documents folder into a secure disk image but you could certainly make one and put your most sensitive items in it within your Documents folder.
I agree with you for not wanting to use FileVault. I've never used it myself and am very leery of it due to things I've read from other users.
Regards,
Steve M.

Prevent oracle r12 legal entity from being posted in another ledger

Given the following:
Ledger = Ireland
Legal Entity:
Germany =123 segment 1
France= 456 segment 1
Ledger=Hong Kong
Legal entity=Hong Kong=789 segment 1
The Ireland ledger is intended for Euro based companies, the Hong Kong for HKD
I want to prevent any journal entries that have a segment1 789 from being posted in the Ireland Ledger, and segment 1 of 123 and 456 from being posted in the Hong Kong ledger.
How does one do this?

Looks like you are sharing a chart of account structure between the two ledger or at least you are sharing the segment 1 value set between the two ledgers.
Once you defined your ledgers, create and assign respective legal entities to your ledgers.
Associate Legal Entity Hong Kong to the ledger Hong Kong.
Associate Legal Entities Germany and France to the ledger Ireland.
Make sure you also assign balancing segment values to the legal entities associated with your ledgers.
Assign 789 to Legal Entity Hong Kong (associated with the ledger Hong Kong)
Assign 123 to Legal Entity Germany (associated with the ledger Ireland)
Assign 456 to Legal Entity France (associated with the ledger Ireland)
Once you assign the balancing segment values to the legal entities, system will not let you use any other balancing segment values (that are not assigned to the legal entities associated with your ledger). This will prevent 789 from being used in Ireland Ledger, and 123 and 456 from being used in Hong Long Ledger.
Hope that helps.
Hasan
Learn Oracle Financials Through Video Demonstrations at http://handsonerp.com

Separating Reporting and Analysis from Compact deployment

Hi,
We need to separate Reporting and Analysis from the compact deployment since need to have better control and already have many reports created. (I already separated Planning and that worked fine)
Reporting and Analysis has three applications:
•     Financial Reporting Web App (includes financial reporting Print Server)
•     Web Analysis web app
•     Framework web app
I plan to use configtool.sh which has following options:
•     Configure Database (will NOT select this, since DB is already configured)
•     Deploy to Application Server (will select this for sure)
•     Configure Reporting and Analysis Services (not sure if need to select this again since was done in the compact deployment) ??
•     Configure Framework Service ( also not sure if need to select this, since was done before in compact)??
•     Configure Framework Reporting RMI Ports (also not sure if need to select this, since was done before in compact )??
My questions:
1. Do I need to reselect to reconfigure the last three R&A options above (or it doesn't matter if I select as originally? Note we already have developed reports)
2. Can I specify to deploy the three Web applications to a new separate Managed server (e.g. Reporting0 and port 8200 i.e. deploy with Financial Reporting) or better deploy each to new separate managed server?
Plan to do this in couple of days. Appreciate the advice.
Thanks
Edited by: user8769031 on Feb 6, 2013 5:35 PM

John,
No, I don't believe it will remove the apps and I have to change the target for each of the three apps to remove them from EPMSever0, and ensure they are in new managed server(s).
That's what I had to do when I separated Planning. (That was your hint, thanks)
Hope my plan is fine. (Sure will be doing a cold backup)
Thanks
Edited by: user8769031 on Feb 7, 2013 11:02 AM

Financial Reports and Attribute Dims

Hi,
Is it possible to include Attributes in a Financial Report and subtotal by the particular Attribute by employee? For Example:
Column Definition has Account = Insurance Cost with a scenario version etc.....
Jan Feb Mar Qtr1
Smith, John Cigna PPO 10 10 10 30
Jones, Justin Cigna PPO 12 12 12 36
SubTotal - Cigna PPO 22 22 22 66
Long, Brad Kaiser 30 30 30 90
Harvey, Bill Kaiser 24 24 24 24
SubTotal - Kaiser 54 54 54 54
Grand Total 76 76 76 120
Where Column 2 'Type' is an attribute assigned to the Employee in Column 1. Also what if column 2 was a 'SmartList' in Accounts dimension instead? Right now outline is a Smart List however getting it to Subtotal is impossible I think as the SmartList is an Account named 'Plan Type' thus it has t be in columns as the report has Account = Insurance Cost in the column definition too.....

Hi
In answer to your first question yes it is possibe to report a dimension by its associated attribute. You will need to drag the attribute dimension and the employee dimension onto the rows for the grid. You may want to play around with whether the attribute dimension comes before or after the employee dimension to see whether there is a noticeable performance difference.
If I am reading your post correctly you currently want to have:
Column1 - Employee
Column2 - Attribute / SmartList
Column3 - Account (Insurance) > Jan
Column4 - Account (Insurance) > Feb
Column5 - Account (Insurance) > Mar
Column6 - Account (Insurance) > Q1
This will work fine for an attribute but if you want Column 2 to be a smartlist then you would have to put your account dimension into columns and that would mean that your smartlist would have to appear in only 1 period, i.e. if it changes from Jan to Feb then you would need more than one column to report it. It will also be harder to get a subtotal using a smartlist, with an attribute the subtotal will naturally be available by selecting the top member of the Employee dimension with your attribute (it will dynamically sum all members with the attribute you are calling).
Hope this helps
Stuart

Financial reporting and balance carry forward at Line item level

Hello
We are in the process of implementing a new GL and using it to create Balance Sheet and P&L statements in BW.
We have installed the new datasource for GL line items 0FI_GL_14 and loaded the data to a DSO. Installed the 0FI_GL_10 (totals infosource) as well.
Also we created a custom infocube on the line items DSO and want to use it to report against a Financial Statement Version. In order to do that we created a
virtual cube with the FM and added the necessary Financial Statement Item and other key figures in the virtual infocube.
Now I want to know is it the correct way to create financial reports?
Can we load totals and Line items to the same infocube? Do we have to load totals to a different DSO/Cube or same Cube?
How do we address the Balance Carry Forward on the Line items cube? Since the balance carry forward is done on totals only, and the cube I created is a detailed cube is it possible to carry forward balances at that level?
Also can someone let me know what is the best approach to create financial reports and give drill down capability at the document level?
Thanks in Advance
Raju Kosuru

Now I want to know is it the correct way to create financial reports?
NO .. Its not.
Can we load totals and Line items to the same infocube?
NO
Do we have to load totals to a different DSO/Cube or same Cube?
Yes.. SAP has delivered C10 for Totals and O14 for line items... No point in creating cube for line items i.e. on top of O14.
Balance carry forward can be done on totals only (that is how totals extractor _10 is designed), U can not do that on the Line items. Pls contact functional consultant for clarification
Best approach is RRI (Jump targets) for _10 report to _14 report to give drill down capability at the document level.

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

How to deploy Forms, Reports and Menu from Client to Server machine

Dear Experts,
I have one requirement to deploy the Forms, Reports and Menu from client machine to server machine.
Deployment involves the following steps :
1. Firstly we have to search the selected file in a folder where the .fmx is present ( in Server machine) and take the back up of the the existing file in the server (Source and destination paths will be available).
Ex. If the existing FMB name is TEST.fmx then the backup file should be TEST_sysdate.fmx.
2. Secondly we have to transfer the file from the client folder (or from another folder of the same server) to the server folder where the back up exists.
Please help me to search/rename/copy/replace the _.fmx/.rdf/.rep/.mmx_ files from client to server.
We are using
9i Database.
10g Forms and reports.
SQL Developer tool.
OS is Windows (Client and Server).
Help me out to attach a file of front end screen which we are planning to develop. It will give a clear picture on this requirement.
Thanks :)
Edited by: 941175 on Jun 17, 2012 9:09 AM
Edited by: 941175 on Jun 17, 2012 9:12 AM
Edited by: 941175 on Jun 17, 2012 9:14 AM

941175
Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
Regards,

Importing Reports and Forms from Oracle to Portals

Hi,
I have read somewhere that it is possible to import all ready created reports and forms from Oracle and view them as a Portlet in Portals. Is this actually possible and if so where do I begin??
Could there be an issue with rights, this is all new to our DBA and we have only just got permission to publish forms created in Portals to the repository. Any ideas??

941175
Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
Regards,

Checklist for installation of Financial reporting and web analysis

Hello All,
Can anyone give me a checklist for installation of Financial reporting and web analysis. The checlist should contain the points/information that the installed FR and WA is proper or not. Please let me know if this this is the correct forum for reporting doubts, if not then plz guide me to the correct oracle forum.
Thanks a lot
Ashu

For which version?
Here is the link for 11.1.1.3 EPM Deployment:
http://download.oracle.com/docs/cd/E12825_01/nav/portal_1.htm
And specifically for Reporting and WA:
http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/ra_1111300_readme.html
Hope this helps.
A

Install Financial Reporting and Analysis

Hi All,
I have a Classic Planning Application on EPM 11.1.1.1.0
I have hyperion installed in a distributed env..(on three boxes..one running windows xp(machine 1), two running windows server 2003(machine 2 and machine 3.)
Machine 2 has ...Essbase Server and Oracle.
Machine 3 has ...Hyperion Planning,Workspace.
Machine 1 has ...EPMA and Calc Mgr.
Now i need to install Financial Reporting and analysis..
Can somebody please guide me as to which box should i go about installing it..?
Regards.
Alicia
Edited by: Alicia on Aug 27, 2009 11:34 PM

Hello John...
let em describe my config
I have a UNIX box and a windows server 2003 box. Now EPMA and calc manager must be installed on Windows
so that part is fixed ...
And on the Unix machine i am going to install sharedservice, essbase,eas,planning
now if i want to install reporting ,then on which machine i should do it?
Unix Box
Shared Services
Essbase Server
EAS
HP
PS
Workspace
Windows Server Box
EPMA
Calc Man
Int Rep
Finan Rep
SQR Rep
Web Analysis
FDM
Windows Box
EPMA and CALC
mgr
I am using EPM sytem 11.
Thanks

Weblogic preventing financial reporting and RAF from being accessed

Similar Messages

Maybe you are looking for