What is a Reclass Document? What is Reversal Document? Difference's

Hello Guru's
1.What is a Reclass Document? How do the Credit and Debit Side work with Example ?
2. What is Reversal Document ? How do the Credit and Debit Side work with Example ?
3. When does one use either 1 or 2 ?
4. Please finish the flow logical mapping  (P&L GL Account(mapped to) ->Cost Element(mapped to)-> Cost Center or Profit Center  or WBS Element or Work Center)  or (P&L GL Account(mapped to) ->Cost Element(mapped to)-> Cost Center (mapped to)->Profit Center)
Please fill in the Tcodes if possible.
I am a BI Consultant please be as specific as possible with out missing small details
Thanks,
Points to be alloted.

Any movie openable in QuickTime.
(72142)

Similar Messages

  • Reversal Document Type

    Hi Gurus,
    "If you have not specified a particular document type for reversal, the system reverses documents using the same document type as that used to post those documents during internal number assignment."
    The above was extracted from sap help documentation. What is the pros and cons of using a different document type for reversal document. I have maintained many system and most of system uses the same document document type for reversal documents. Anyone knows what is the preferred settings and could explain to me? The pros and cons of both using the same/different document type for reversal document.
    Thank you.
    Regards,
    Wilson

    Hi ,
    The concept of using a differnt document type for reversal is for tracking purpose .
    For eg. for vendors if you want to segregate the invoice and the revesal document for the same you can do that .
    it is for the conviniency and tracking purpose that you can have a different docuent type for reversal .
    Cheers ,
    dewang

  • Is possible Reset the reverse document ?

    I ask it because the system showed me >> u2018Resetting this reverse document is not possibleu201D

    Ailton,
    I am going to try to explain what is a reverse document and a cleared document.
    A reverse document normally is used to turn zero the amounts posted in some accounts.
    For example, you created a FI invoice to a vendor with the following characteristics:
    Item 01, Posting Key 31, Vendor number 001, Amount 1.000,00 BRL
    Item 02, Posting Key 40, Account number 33030001, Amount 1.000,00 BRL
    If you want to undo the invoice, this is not possible in FI module. What you can do is undoing the amounts posted in both vendor and account number, by creating the reverse document. Example:
    Item 01, Posting Key 21, Vendor number 001, Amount 1.000,00 BRL
    Item 02, Posting Key 50, Account number 33030001, Amount 1.000,00 BRL
    A cleared document normally is used to close the open item. An open item in FI module is a line item which depends on a cleared document to have its process closed. For example, let's say you didn't reverse the previous mentioned FI invoice. The vendor item needs to be cleared (imagine you should pay to the vendor 1.000,00 BRL and the cleared document will show to you the vendor has already been paid). Example:
    Item 01, Posting Key 21, Vendor number 001, Amount 1.000,00 BRL
    Item 02, Posting Key 50, Account number 33030001, Amount 1.000,00 BRL
    Hope you have understood all of this!
    Kind Regards,
    Daniel

  • Reversal of reversed document

    Hi,
    I need some clarification on the below issue.
    User generated a payment run (APP) for a Vendor invoice however the bank confirmed due to technical error in their side the payment was not generated successfully,so the user has reversed the payment document .However it was found later from bank that payment was successful.
    Now they want to restore the payment document which was reversed.
    Doc no 5300000047 payment document (KZ) was reversed against doc # 3000008122 (ST).
    They want restore 530000047 in SAP..Is it possible.
    Kindly advice.
    Regards.
    Lavanya

    Hi Expert,
    You can reverse the reversed document, but it will generate a new document number in SAP.
    Go to T-Code: F-02
    In Menu -- Select Document -- Post with reference or Press (Shift + F9)
    Provide Document Number of reversed document, Company Code and Fiscal Year and Select the Generate reverse posting check box..
    Which will reverse your reversed document...
    Regards,
    GK
    SAP

  • How to get a Reversal document number from Original Document Number ?

    Hi,
    Say I have a Original Document number. This document has been reversed.
    I am using table BSEG. Original Document Number for any Reversal Document is stored in field "BSEG-REBZG"
    My query is that now I have the Original Document Number. How can I get the Reversal Document from this Original Document number ??
    OR in simple words, Is there any possible way to find out if my original document has been reversed ?
    I need help to write a select query i.e the tables and fields.
    Please help.
    Thanks.

    Hello,
    Check the fields:
    BKPF-XREVERSAL: Reversal Indicator (1: Reversed Document, 2: Reversal Document)
    BKPF-STBLG: Reverse Document Number.
    BR,
    Suhas

  • FB08 Reversal document

    Hi Gurus
    Our client is having configuration, when we reverse Incoming payment document created through in F-28  in FB08 with specific Reversal reason, it will reverse incoming payment document and post reversal document  but apart from that it will  create one more new document for cheque bouncing charges which will debit customer and credit Gl account.
    1. Can anyone guide where above type of configuration will be done?
    2. When it is reversing it is creating two documents in Profit centre accounting which is actually duplication. One with reference document no of Incoming payment document and second document contains reference document of New document created for cheque bouncing charges?
    Thanks and regards
    Ramarao

    Hi Ram
    If you want to have an automatic deocument creation for bouncing charges at the time of reversal, you will have to go for a program development for which your Abaper can be of help. 
    However, the bouncing charges will be provided separately by the bank in the bank statement which can be automatically entered into the relevant GL through Bank Statement Processing, which is normally done as per practice.

  • Document prints in reverse, what setting can I change to correct this?

    Document prints in reverse, what setting can I change to correct this?  Not a printer problem - documents print in correct order when using other programs.  Using Acrobat X Pro on a Mac.

    One more place to check.  Open a document you'd like to print, then click the 'Printer...' button.  Hit 'Yes' to the warning dialog box that comes up.  For your specific printer, this might already be enabled.  Change the drop-down menu that says 'Layout' to 'Paper Handling'.  It could be that the Page Order preference has been changed here too.  Just a thought!
    -David

  • How to tell what fonts are missing in a Photosohp CS5 document?

    Hello!  I have received some work from a graphic designer.  I need to modify some of the text in the document.  When I open the document I get an error message:
    Some text layers might need to be updated before they can be used for vector based output.  Do you want to update these layers now?  [Update] [No]
    If I click [Update] it replaces the font with Myriad Pro.  If I click [No] the text looks the way the designer intended, but I have the exclamation mark-triangle symbol over the layer with the text.  If I try to edit the text I get another warning:
    Editing or rendering the text layer "Text Layer" will cause its layout to change.  Continue?  [Cancel]  [OK]
    The same behavior described above occurs.  If I click [Cancel] I obviously can't edit the text.  If I click [OK] it changes the font to Myriad Pro.
    I would like to determine what font the layer is using.  I could swear that previous versions of Photoshop would tell me what fonts were missing when I opened a document.  I can't use the text tool to select the text without it changing the font.  Other posts have mentioned using the text tool to look at the text drop-down to find a greyed-out font which indicates the missing font.  I do not have that.  I only have perhaps 200 fonts installed.  Can anyone tell me how to determine what fonts a .PSD document is using?  I would prefer not to bug the graphic designer if possible.  Thanks much!
    ~ Dan

    Not sure why you are getting ""Font is present on the system but requires a layout change.", usually you do not get that instead the name of the font shows.
    We use extensis Universal Type Client, so the fonts load automatically upon opening files, and never really get missing fonts in Photoshop.
    Actually fontbook has auto font loading if you want to give that a try. Fontbook >> Preferences

  • What is the best way to create business documents in CRM

    Hi All,
    What is the best way to create business documents like contract, sales order, debit memo etc in CRM ? Unlike R3 we can't use our good old BDC with recording. Moreover for most of them although there are Business Object but no BAPI to creation so what is the way ? I found in SDN there are two MAGIC Function module CRMXIF_ORDER_SAVE. Do I need to that alawys ?
    Is it nees to via IDoc and cannot be done just by calling from ABAP program ? The input parameter of the FM is a complex deep structure.
    Please help.

    Ashim,
    Try looking at the program:
    CRM_TEST_ORDER_MAINTAIN
    I think that should help you figure out the parameters.
    Good luck,
    Stephen

  • What is the shortcut key to select all documents in the book panel?

    What is the shortcut/hotkey to select all documents in the book panel?

    I don't believe there is a keyboard shortcut available for that feature. But I believe if you click-select the topmost chapter, and Shift-click the bottommost chapter, it should select them all.
    Other shortcuts for books can be set up in Edit > Keyboard Shortcuts in the Panel Menus product area. There are no default shortcuts in that area.

  • IMac. Adobe Acrobat Pro 8.3.1. Since I installed Yosemite, cannot insert a pdf document into a pdf document. What's my upgrade?

    I have an iMac with Yosemite. I have Adobe Acrobat Pro van 8.3.1.
    I am unable to insert a pdf document into a  pdf document. I go to Document/Insert in the menu bar, get a spinning ball, can do nothing with the app except force-quit.
    What's my upgrade? I cannot find one. Do I have to pay full price for a version that will work?

    Your version of Acrobat is quite old and not compatible with any current OS, so problems are to be expected. It is too old to qualify for an upgrade as well, so if you want the current version (XI) then you need to purchase a new license, which you can do via the Adobe Products Page.

  • Detect what the default edit form is for a document library and list using jquery

    Hi,
    So what I have done is with some jquery made it that when a files are dragged and dropped into a document library and there is a required field such as "Metadata" the EditForm.aspx opens up for the user to fill in the required column. I am building
    the url up from what I have found in SharePoints DragDrop.js file. This is all working perfectly I just need to find a way to dynamically find what the default edit form is for that document library as I have just hardcoded like this...
    g_currentControl.strSiteUrl + "/" + this.ListName + "/Forms/EditForm.aspx?ID=" + id
    So I need a way to figure out what the default edit form is instead of hard coding like this in case someone creates a custom_editform.aspx or something for one of the lists.
    Thanks

    You can get it by hitting this REST end point via JQuery:
    http://weburl/_api/Web/Lists(guid'YOURLISTGUID')/Forms
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

  • I purchasede pdf last year, now I cannot edit a document, what do I need to do?

    I purchased pdf last year, now I cannot edit a document, what do I need to do?  Can someone help me please?  Do you have a phone number I can call?

    Let be clear on some terms please.
    pdf is a file type opened/viewed with Adobe Reader or Adobe Acrobat
    Please check what program opens pdf files on your system.
    Open a pdf
    From the top bar Help > About Adobe ______
    Is this product Adobe Reader or Adobe Acrobat  - Professional or Standard?
    Adobe Reader is free, there is no cost. Assuming you have Acrobat...
    What do you want to edit within the pdf. (Minor edits are possible, major edits are not)
    Have you editted anything with Acrobat? The file in question may be protected by the author; dissallowing changes.

  • Saving a Pages document: when I first save a pages document it saves and I don't know where it goes or what its name is.  I want to be asked every time I save a pages document what to name it and where to save it. How do I set this preference?

    Saving a Pages document: when I first save a pages document it saves and I don't know where it goes or what its name is.  I want to be asked every time I save a pages document what to name it and where to save it. How do I set this preference?

    I'll guess that you've used a page layout document & pasting created a text box. You can add more pages & create linked text boxes, but I think you'd be better of using a word processing document. In word processing documents there is a basic text layer & additional pages will be created as needed to fit the text. Take a look at the toolbar of your document. If it says "sections" for the +page icon it's a word processing document, if it says "pages" it's a page layout document.

  • Using PRO XI for educators. Every time I try to change a document into a PDF document the program asks me to sign up for a monthly fee.  What's going on???

    I am using Adobe XI Pro for educators.
    Every time I try to change a document into a PDF document the program asks me to sign up for a monthly fee. What’s going on???

    Hi Peter,
    Are you still facing this issue.
    I am not able to see any product registered under the email id using you are registered here.
    Regards,
    Ajlan Hulda.

Maybe you are looking for