What is the Maximum Data can a file adapter can send at a time.

Hi ,
What is the Maximum Data can a file adapter can send at a time.Is there any maximum limit data can adapters will send.
can any one help on this.
regrads
Raghu

Hi Reddy,
I have raised the same question and I got correct answer.
Refer the below thread which will give u information.
Wat is the maximu size of data XI can handle
Thnx
Chirag

Similar Messages

What is the maximum size of a jpg that can be imported into iPhoto?

what is the maximum size of a jpg that can be imported into iPhoto

I've imported and worked on Photoshop and tiff files up at 220 MB (8400 x 6600 pixels) in size. It does take some time to do any edits, up to 7 seconds for some. 220 MB is a big file but iPhoto handles it OK.
I do have a top of the line iMac with SSD drive so it's pretty fast. Other Macs may be slower depending on their configuration.
OT

What's the maximum number of Apple TVs that can be displayed in the AirPlay list?

We have 50 conference rooms all on the same network and are considering equiping each one with an Apple TV for AirPlay Mirroring our iPad 2s to the rooms projector, or TV. What is the maximum number of Apple TVs that can be displayed in the AirPlay menu to select the correct Apple TV for the conference room being used?

From what you're saying it sounds as though you wouldn't want to Airplay to all AppleTVs at once, just identify them when that specific room in use?
This is one of those uncharted territories wheer most domestic users will not require such a set up - Apple provide no official info about this, but they'd be your best source to ask.
AC

What is the maximum number of physical link we can bind to a ether-channel and port-channel

Hi,
I was studying about port-channel & ether-channel and found that, it can be bind up-to 8 ports. So maximum number, we can have of 8 ports or more ?
For binding we should have minimum of 2 ports or 1 ports will work ? For load-balancing purpose, is the port no. would be in a bundle of 2,4 and 8 ?
Thanks

Hi Kathik,
I have gone through one document. It's saying the below mentioned things :
Jun 7, 2012 9:36 PM (in response to Sarabjit)
Re: What is the maximum number of etherchannels we can have?
The maximum number of Etherchannels varies from platform to platform. The maximum number of ports in an etherchannel is either 8 ro 16 depending on the platform. The minimum number of ports in an etherchannel bundle is 1.
Jun 8, 2012 1:27 AM (in response to Sarabjit)
Re: What is the maximum number of etherchannels we can have?
Etherchannels is a Cisco term. Other vendors call them 802.3ad trunks. It's common to see something like this in datasheets:
48 ports 10/100/1000 Mbit/s
802.3ad:
Maximum of 32 groups
Maximum of 8 ports per group
The document url is https://learningnetwork.cisco.com/thread/43680
The another document says the below mentioned things :
Matrix of Load Balancing Methods
This matrix consolidates the load balancing methods that this document describes:
Platform
Address Used in XOR
Source-Based?
Destination-Based?
Source-Destination-Based?
Load Balancing Method—Configurable/Fixed?
6500/6000
Layer 2, Layer 3 addresses, Layer 4 information, or MPLS information2
Yes
Yes
Yes
Configurable
5500/5000
Layer 2 address only
Yes
Cannot change the method
4500/4000
Layer 2, Layer 3 addresses, or Layer 4 information
Yes
Yes
Yes
Configurable
2900XL/3500XL
Layer 2 address only
Yes
Yes
Configurable
3750/3560
Layer 2 or Layer 3 address only
Yes
Yes
Yes
Configurable
2950/2955/3550
Layer 2 address only1
Yes
Yes
—1
Configurable
1900/2820
These platforms use a special method of load balancing. See theCatalyst 1900/2820 section for details.
8500
Layer 3 address only
Yes
Cannot change the method
1 For the 3550 series switch, when source-MAC address forwarding is used, load distribution based on the source and destination IP address is also enabled for routed IP traffic. All routed IP traffic chooses a port based on the source and destination IP address.
2 For the 6500 series switches that run Cisco IOS, MPLS layer 2 information can also be used for load balancing MPLS packets.
The document url is http://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html
Another document says the below mentioned things for load-balancing :
inally, here is full list of valid load-distribution methods:
•dst-ip—Load distribution on the destination IP address
•dst-mac—Load distribution on the destination MAC address
•dst-port—Load distribution on the destination TCP/UDP port
•src-dst-ip—Load distribution on the source XOR destination IP address
•src-dst-mac—Load distribution on the source XOR destination MAC address
•src-dst-port—Load distribution on the source XOR destination TCP/UDP port
•src-ip—Load distribution on the source IP address
•src-mac—Load distribution on the source MAC address
•src-port—Load distribution on the source port
The document url is https://learningnetwork.cisco.com/thread/63064
Please suggest.

What is the maximum filesize for a FTP Adapter?

I have xml files with 1000's of records to read in. The file size can range anywhere from a few MB up to ~100MB. Most of them are about 50 MB.
The FTP adapter works when I have a small file, but with larger ones it apparently times out. Once it runs into a big file like this, it won't process any more files until I restart the process. It doesn't show any faults or even any record of a running instance in the BPEL Console, so I have no idea specifically when it breaks. I uploaded a 10MB file to my ftp server and left it for a half hour, but nothing showed up, so I'm assuming it's broken rather than just taking a long time.
What is the maximum file size for a FTP adapter? Can I change this somewhere? I looked in the ...\application-deployments\default\FtpAdapter\oc4j-ra.xml file but couldn't find any settings to change.

Well no luck on my end and it doesn't look like anybody else has any ideas either. This thread Re: FTP Adapter, Java Embedding, ... says that if you can't get the functionality you need out of the default one, you should write your own FTP adapter in JCA. I looked at JCA and would like to write a simple polling adapter and then put all my FTP code in embedded java.
Can somebody explain how I could achieve the basic FTP Adapter polling functionality in JCA? I'm having difficulty figuring out how to have an ongoing polling process without instantiating a BPEL process itself, like the existing FTP adapter does. I don't want to set off on writing my own adapter if it's going to be a much larger undertaking than I have time for.
Also, is the source code open for the default FTP adapter? It would be great if I could just modify the few things I need to change rather than write one from scratch.

What is the maximum,data we can pull in BI-7.0 a day.

Hi,
All, there is a small isuue standing, can any one tell me as to how much data can we pull in a dfay my client wants to pull 250k a day is it possible?
Somebody pls give me the specifications as to how much of maximum data can we pull in BI-7.0, in a day .
Thanks in advance,
Point's will be awarded
Regards
Kittu

Kittu,
We don't have any Measurements... it's all depends on your Hardware.. DB Background Process etc.
In my last client(3.1C), we used pull daily delta around 150K to 250K. we didn't have any Isuues.
Nagesh Ganisetti.
Assign points if it helps.

What is the maximum amount of memory my laptop can have?

I have a HP Pavillion DV6-7028tx with WIndows Home Premium installed, and I was wondering how much memory i can upgrade to?
The hp website says that 8gb is the maximum that it can handle, but the Corsair system scanner says that it should be able to hold a total of 16gb.
I've read that the maximum memory home premium can have is 8gb, so does that mean that if I upgrade to proffesional, I will be able to have 16gb?
Also, if I upgrade the memory myself, will it void my warranty?
This question was solved.
View Solution.

Hi:
Below is the link to the service manual for your PC.
http://h10032.www1.hp.com/ctg/Manual/c03216834.pdf
Supported memory can be found in chapter one, page four.
The specs page shows 8 GB but that is contradicted by the manual. Plus you got confirmation from the corsair scanner that can run 16 GB in your machine.
What does it say about the FSB speed? The manual states you can run PC3-1600 (PC3-12800).
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007609%20600000410%20600213067&IsNode...
W7 Home Premium will recognize up to 16 GB of memory so you do not have to upgrade the OS. Only beyond 16 GB would you need to go to W7 Pro.
You will not void the warranty if you read the service manual and follow the procedures for installing the memory, unless of course you fat finger something and physically damage the hardware.
The memory you install will not be covered under HP's warranty of course, but most quality memory carries its own lifetime warranty.
Paul

What is the maximum number of line items we can enter in an order...

Hi,
Can anyone explain what is the max number of line items that v can enter in an order....
or if i want to increase the number of line items than the max where it is controlled.
Because my mm counter part is facing this in the PO he could make only 9999,the problem is when posting...the accounting document is not getting generated bcas of exceeding the limit.
venugopal

hi,
this is my personal experiance that we can enter at the most 499 line items in SALES ORDER.
This is because for every line item there will be 2 financial entries, debit and credit. and 1 FI document can have at the most 999 line items (which we can not increase without KEY fromSAP)
If we divide 999 by 2 then it comes to 499.50 so you can enter at the most 499 line items in Sales order.
Regards
Vishal

What is the role of Schema in File Adapter

I am configuring File Adapter during the configuration step - 6 two options are there Schema is Opaque & Schema file url, what is the difference between these two and why it is needed? If It is required then what are the elements should be present at schema?

+"If native format translation is not required (for example, a JPG or GIF image is being processed), then select the Native format translation is not required check box. The file is passed through in base-64 encoding.+
+XSD files are required for translation. If you want to define a new schema or convert an existing data type definition (DTD) or COBOL Copybook, then select Define Schema for Native Format. This starts the Native Format Builder wizard. This wizard guides you through the creation of a native schema file from file formats such as comma-separated value (CSV), fixed-length, DTD, and COBOL Copybook. After the native schema file is created, the Messages page is displayed, with the Schema File URL and Schema Element fields filled in. For more information, see Creating Native Schema Files with the Native Format Builder Wizard."+
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10231/adptr_file.htm
Native Data Translation
maybe that explains it a bit

What is the maximum number of user accounts that can be logged in at once?

How many users can be logged in at once, using Fast User Switching (FUS)?
Ideally, I'd like an "official" answer from Apple, or if someone can refer me to "official" Apple documentation that answers this question, that would be fine.
I think the answer is 10 but need to know for sure.
Thanks in advance!
Mac OS X (10.4.9)

You may be right about CLI vs GUI differences...
Call me a geek - but I wanted to see what would happen when my system hit the limit. So I saved all open documents, used a loop to create 40 passwordless accounts, then set up a login item so that on login, FUS would be invoked to log in to the next sequential uid.
When I came back (some time later), the system was logged in to the 40th user, and with a few exceptions, things seemed to be working ok...
The most obvious problem was that SystemUIServer was crashed in most of the users. I'm not sure when that started, but at some point after so many logins, it wasn't possible to launch the SystemUIServer, meaning no FUS menu (among other things). Other programmes launched and worked ok, though a bit sluggish (I had 7 swap files at that point, where it is rare for me to have more than two). But "Terminal.app" worked fine, and FUS was possible via command line so that wasn't a big problem, and the few other accounts I switched over to check were in a similar state.
The "Accounts" pref pane seems to be limited to showing 42 accounts (I had several accounts prior to creating the 40 test accounts), but the FUS menu (viewed from an account where SystemUIServer hadn't crashed) showed them all. I forgot to check the "Login Window".
Of course, there may be other things that don't work under these conditions that I didn't stumble across, but depending on whether or not SystemUIServer is required, and probably load and RAM availability, it looks like it is possible to squeeze at least 40 logins at once on a system.
And again, this obviously isn't "official" in any way.

What is the maximum size of indexed array that can be created during execution of while loop?

Hello,
I am using a ring acquisition to take in images. If i write them as files in the loop, it slows down the acquisition unacceptably. Therefore i am converting image to array and storing the array until the acquisition is complete and then reading the array and converting back to image to save. The program sometimes runs out of memory (after a couple of minutes). Can anyone think of a way where i can store the array/images within the execution (without losing image information), without slowing it down and to avoid this memory problem?
I have included the VI.
Thanks in advance for any help or advice.
kindest regards,
FraserD
Attachments:
LL_Ring_in_IMAQ_8_bit_array_then_write_as_png.vi ‏94 KB

When you build the array of pictures you do it using auto-indexing out of a while loop. That means that memory is aquired for a copy of the previous picture array and the array is rebuilt on every iteration, this is slow and requires a lot of extra memory.
If you want to speed things up try initializing a shift register with a 3D array of a size that will be able to hold a certain number of pictures, then replace the "pages" as new pictures are aquired, replace operations do not require copying of the previous array and will thus be much much faster. The difference is exeptional when dealing with large arrays/amounts of data.
Now, the shift register buffer could be built into a functional global, and you can add a push/pop logic to it so that you can have a p
arrallell loop that works on writing the elements to disk. You could use a que for this, but I think even though you specify a size limit to the que it still aquires memory as new elements are added (correct me if I'm wrong people...:-)), so a functional global acting as a circular buffer og fixed size frame for a que should be better.
MTO

What is the maximum number of matching entires that can be included in a filter ?

I have created a message filter for "junk".
I seem to have added one too many entries and now it does not filter any new "junk" entries.
I have deleted some of the new entries and added them again, only to find they are not filtered.

You may be right about CLI vs GUI differences...
Call me a geek - but I wanted to see what would happen when my system hit the limit. So I saved all open documents, used a loop to create 40 passwordless accounts, then set up a login item so that on login, FUS would be invoked to log in to the next sequential uid.
When I came back (some time later), the system was logged in to the 40th user, and with a few exceptions, things seemed to be working ok...
The most obvious problem was that SystemUIServer was crashed in most of the users. I'm not sure when that started, but at some point after so many logins, it wasn't possible to launch the SystemUIServer, meaning no FUS menu (among other things). Other programmes launched and worked ok, though a bit sluggish (I had 7 swap files at that point, where it is rare for me to have more than two). But "Terminal.app" worked fine, and FUS was possible via command line so that wasn't a big problem, and the few other accounts I switched over to check were in a similar state.
The "Accounts" pref pane seems to be limited to showing 42 accounts (I had several accounts prior to creating the 40 test accounts), but the FUS menu (viewed from an account where SystemUIServer hadn't crashed) showed them all. I forgot to check the "Login Window".
Of course, there may be other things that don't work under these conditions that I didn't stumble across, but depending on whether or not SystemUIServer is required, and probably load and RAM availability, it looks like it is possible to squeeze at least 40 logins at once on a system.
And again, this obviously isn't "official" in any way.

What is the best data plan overall. I can't decide how many GB of data to get...

I can't decide how many GB of data to get...

You can change the data plan on a monthly basis. So as a start, choose one of the smaller amounts, use it for a month or two. Then look at your account and see how much data you are using on a regular basis. If you use a lot of data and need a bigger plan, choose that for next month. However, if you use less data, move to a smaller plan. I did this, and since I'm on WiFi most of the time at home and at work, I migrated to the smallest 3G data plan.

What's the maximum size of a pdf you can upload to the adobe cloud service?

I'm trying to upload a book of 545 MB of size, with no success at all. Any information about restrictions? Thanks for the reply.

Hi emoussi,
I am so sorry for the inconvenience caused & will help you to get this issue resolved.
Please let me know the file format of the e-book that you are trying to upload & also let me know if there is any attachment with that or any java script implemented on that e-book?
Also, check your Internet upload speed at Speedtest.net by Ookla - The Global Broadband Speed Test as 545 MB is a big size to upload & it might take long time to upload depending on your Internet upload speed.
Regards,
Aadesh

What is the Maximum inputs and alternate inputs that can be associated to a formulation specification.

Hi, can you please let me know how many maximum inputs can be associated to a formulation specification. Thanks, Rohini M

I don't believe we have a hardcoded limit. Are you having issues when you reach a certain number?

What is the Maximum Data can a file adapter can send at a time.

Similar Messages

Maybe you are looking for