What resolution with log & transfer

When a 1920 x 1080i AVCHD clip is brought into FCE HD via log and transfer, it is my understanding that it goes from AVCHD to AIC. What would the resolution be after the import? In iMovie the clips become 1920 x 540 AIC, I am hoping for something more from FCE.
Thanks in advance for any insight.
Tom

iMovie gives you a choice on what format to convert to. If the original media is really 1920x1080 that's what FCE converts it to.

Similar Messages

  • Re Problem with Log & Transfer

    When capturing using log & transfer,the media shows in transfer window but after adding it to queue it then shows in status button as no data?   Can anybody help.

    I have an imac 2ghz intel core duo memory 1gb using snow leopard 10.6 & quicktime 10.6  I have just installed a 2nd external hard drive seagate free agent goflex  My camera is Sony HDR-XR105  AVCHD. I have been able to upload in the past ok but the problem has only occured since installing the extra drive .Connected by USB.

  • Log & transfer crashes with a big amount of clips

    Hi everybody,
    I'm converting some 5D footage with log & transfer to proresLT.
    I was plannig to have this done during the night but when i'm putting a big amount of clips (I have a looot of clips !) fcp crashes.
    Are you aware of somethng like that ?
    Thanks

    It crashes after adding (adding, not converting) 300 clips approximatively.
    Sometimes more, sometimes less.
    I have 7.0.2 version.
    I'm using the plugin, yes.
    I have a 3x1To RAID1 internal SATA (spinpoint F1)
    Message was edited by: chle

  • Panasonic camcorder choice (log & Transfer problems?)

    Hi
    I recently borrowed a panasonic HDC-HS9 which I like very much but had some problems with Log & Transfer on FCE... After some setting up I managed to get the L&T working well but could never get the preview to work. When attempting to preview it would either crash FCE, turn the preview window green, or both. Has anyone else solved this problem?
    I am thinking of getting the lower spec HDC-SD9 camcorder but have some reservations re. compatability given the issue above. Also the SW supplied by panasonic only supports PC... any thoughts people?

    I have an HDC-HC5, when connected via usb to camera for import I sometimes had some issues, mainly with speed but not quite what you are reporting.
    What I ended u doing was connecting the SD card directly to the MAC using a SD->USB card reader, seemed to be better.
    The software supplied (HD-Writer) is dire and uis of no use, the MPEG export is a joke.

  • Random crashes when doing routine editing, then log & transfer

    I have been experiencing crashes when performing simple editing then returning to Log & Transfer to pull in more footage into the project. I did a permissions repair which seemed to work for a short time - but now it is crashing again. I also followed Shane's advice to disable the Remove Advanced Pulldown and Multiple Frames setting in the Log & Transfer preferences. I have a new MacBook Pro 2.66 ghz and new Final Cut Studio with Final Cut Pro 7.
    Here is a portion of the error log - this is basically the same error when the crash occurs:
    Exception Type: EXCBADACCESS (SIGSEGV)
    Exception Codes: KERNINVALIDADDRESS at 0x00000000ffffffff
    Crashed Thread: 0
    Thread 0 Crashed:
    0 com.apple.FinalCutPro 0x0015459e DispatchMultitouchGestureCommand(OpaqueEventRef*, long, unsigned char) + 500
    1 com.apple.FinalCutPro 0x0015a713 DoEvent(OpaqueEventRef*, KGDictInt*) + 8309
    2 com.apple.FinalCutPro 0x00414a21 Events(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 67
    3 com.apple.HIToolbox 0x942bc13d DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1181
    4 com.apple.HIToolbox 0x942bb57b SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
    5 com.apple.HIToolbox 0x942d7ecc SendEventToEventTarget + 52
    6 com.apple.HIToolbox 0x942ea603 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 2579
    7 com.apple.HIToolbox 0x942bc4f6 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2134
    8 com.apple.HIToolbox 0x942bb57b SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
    9 com.apple.HIToolbox 0x942d7ecc SendEventToEventTarget + 52
    10 com.apple.HIToolbox 0x94344a6c ToolboxEventDispatcher + 86
    11 com.apple.HIToolbox 0x943412c2 RunApplicationEventLoop + 222
    12 com.apple.FinalCutPro 0x0015464f KGMainEvent(void*) + 51
    13 com.apple.FinalCutPro 0x002c1aa8 main + 54
    14 com.apple.FinalCutPro 0x00003a6b _start + 209
    15 com.apple.FinalCutPro 0x00003999 start + 41

    Update - after completing some editing today, it appears the crashes are only occurring whenever I am working with Log & Transfer - especially when I am previewing the clip, marking in/out, and also when I am scrolling through the list of clips.
    I appreciate and help.

  • Log & Transfer with Mac OS 10.6.2

    Having previously had a fully working, and it has to be said impressive, installation of FCE 4.0.1 I attempted to ingest some new footage recently. I had not used FCE for about 3 months as I had no need to.
    FCE started up great and I was able to create a new project as well; but when I opened the Log & Transfer window and attempted to add the folder I'd copied from the camera's SD card, nothing. The folder name does not appear as the source at the top of the window and no files appear in the top list pane.
    Now to troubleshoot here's my line of thought:-
    1. The latest footage is corrupt.
    2. The system has changed since Iast used FCE. (This is true and I will come to this soon)
    3. The FCE install is corrupted.
    So here's what I've done to address each of the above steps.
    1. I returned to the last footage I'd successfully ingested and I could not add that footage's folder to the L&T window either, as a precaution I then trashed the preferences and tried again, still no good.
    2. As stated above my system has changed as since the last time I used FCE I've upgraded to Mac OS 10.6 and subsequently 10.6.2 also I've installed Adobe Photoshop Elements 8.0. So to troubleshoot this I needed a test bed and so used a spare internal SATA drive as a new Startup Drive and performed the following.
    i. Erased the drive and re-formated as Mac OS Extended (Journaled).
    ii. Installed Mac OS 10.5.
    iii. Patched 10.5 with three iterations of Software Update.
    iv. Installed FCE 4.0.
    v. Patched FCE to 4.0.1.
    vi. Tested FCE and it worked perfectly, interesting but not the solution I would like.
    vii. Installed Adobe Photoshop Elements 8.0 and then tested FCE and it worked perfectly.
    viii. Updated Adobe Photoshop Elements 8.0 and then tested FCE and it worked perfectly.
    ix. Upgraded Mac OS to 10.6 and then tested FCE and it failed to add folders to the L&T pane.
    x. Patched Mac OS to 10.6.2 with three more iterations of Software Update and then tested FCE and it failed to add folders to the L&T pane.
    Ok a short pause in the overly detailed breakdown of what has occurred (I don't want anybody to be in any doubt as to my veracity in troubleshooting).
    So as far as the above sequence is concerned Mac OS 10.6.x does not support FCE and AVCHD media, as an added 'feature' after two attempts at adding a path to the footage FCE crashes completely.
    Maybe a 'clean' clean install is what is needed.
    xi. Erased the drive and re-formated as Mac OS Extended (Journaled) again.
    xii. Installed Mac OS 10.6 and patched with three iterations of Software Update.
    xiii. Installed FCE 4.0 and patched with Software Update to 4.0.1.
    xiv. Tested FCE and it still will not add a path to any media and crashes after a handful of attempts at getting it to do so.
    So the third of possible causes i.e. FCE install corrupted is excluded as cause 2 Mac OS problems are the culprit.
    Am I the only person with a professional spec (albeit a little long in the tooth, yet very capable) machine; built with the latest OS as per manufacturers recommendations; FCE software installed as per best practice and the media stored on a dedicated drive in the AVHCD file structure (as a footnote the software will not "see" the camera either) who is unable to use FCE as it will not do what it says on the tin. Unless the tin is 10.5.
    Spleen vented is anybody able to help?

    Impressive - you've been very methodical & thorough - I wish most posts were as thoroughly detailed as yours! But something else is going on. I have FCE 4.0.1 on 10.6.2 and it's working perfectly; ditto for a lot of other people here.
    You mentioned that you +"attempted to add the folder I'd copied from the camera's SD card"+ - have you tried Log&Transfer directly from your camcorder? If not, try that and let us know what happens (or not).
    When you copied that folder from your SD card, did you copy the +entire folder structure+ (all the way from the root of the SD card) or just the folder containing the video? That could be the problem (you need the entire folder structure for AVCHD video, not just the folder containing the MTS files.) What camcorder are you using?

  • "Kernel Panic" with log file: what could be the cause...?

    Hi,
    Today I had my 3th "kernel panic" if I'm right.
    I have an IbookG4 1,42GHz.
    I've already post my problem, with log, on a dutch Apple forum but the people don't know what the log means. The problem can't be new hardware (more memory) because I haven't installed more and new hardware except that I have an external Harddrive.
    One people suggest that I reset my PRAM, NVRAM and PMU and control my HD. That I have done but if the problem is solved, I don't know.
    What I was doing the last 2 times when a "kernel panic" occured: I was working with VectorDesigner. The last time, that program was the only one open. Is it possible that my laptop can't cope with that grafic program, the laptop gets overload and crashes?
    Also, when I restart the laptop after the "kernel panic", the laptop ask to push on a button to send a paper to Apple, but if I do so It seems to do nothing. So has it send a paper, I don't know.
    Below the log of the last 2 kernal when I was working with VectorDesigner. I hope that someone could read this log and understands it and know what the cause is of the kernel panic:
    Thu Mar 27 17:43:51 2008
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B0015000 PC=0x0000000000976278
    Latest crash info for cpu 0:
    Exception state (sv=0x2EFAE000)
    PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CF33A60; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
    0x00029234 0x000233F8 0x000ABEAC 0xFF4B2E30
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x963000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
    Proceeding back via exception chain:
    Exception state (sv=0x2EFAE000)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x2F0A6A00)
    PC=0x9000B348; MSR=0x0200F030; DAR=0x53D3E010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF4B80; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x2EFAE000)
    PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CF33A60; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
    0x00029234 0x000233F8 0x000ABEAC 0xFF4B2E30
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x963000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
    Exception state (sv=0x2F0A6A00)
    PC=0x9000B348; MSR=0x0200F030; DAR=0x53D3E010; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF4B80; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Mon Apr 7 14:00:05 2008
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B0015000 PC=0x0000000000976278
    Latest crash info for cpu 0:
    Exception state (sv=0x212C2500)
    PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CEA3A60; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
    0x00029234 0x000233F8 0x000ABEAC 0x00000FFF
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x963000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
    Proceeding back via exception chain:
    Exception state (sv=0x212C2500)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x21249C80)
    PC=0x9000B348; MSR=0x0200F030; DAR=0x06CB4240; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF51C0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x212C2500)
    PC=0x00976278; MSR=0x00009030; DAR=0xB0015000; DSISR=0x40000000; LR=0x00976288; R1=0x0CEA3A60; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00976288 0x0099DEC8 0x0099C7F0 0x0096C924 0x002EC884 0x0008CA28
    0x00029234 0x000233F8 0x000ABEAC 0x00000FFF
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x963000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x877000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x89b000
    Exception state (sv=0x21249C80)
    PC=0x9000B348; MSR=0x0200F030; DAR=0x06CB4240; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFF51C0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Greets,
    Sven

    Maybe something on this page will help you. Scroll to the kernel panic causes near the bottom.
    http://docs.info.apple.com/article.html?artnum=106464

  • Device not working with Log and Transfer in FCP

    I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
    The camera is question is a Cannon Legria FS20, here is a link
    http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
    I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
    Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
    How can I get it so that my device works with log and transfer?
    Thanks

    Hi -
    I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
    Log and Transfer only works with High Definition material.
    You will need to convert your video clips into a format that will work with FCP.
    I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    This application will convert your MPEG-2 files into a format that you can use directly in FCP.
    Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
    Hope this helps.
    MtD

  • What kind of log I can get with "level informational" - c2950 & 6500

    Hello, everybody, It is nice to meet you. I am working in Tokyo in japan as network engineer.
    It is my first time to write something on here Cisco Support Community and I don't speak English very well.
    So I hope everyone understand my pour question and writing. But I wish somebody anwser to this question.
    I am using kiwi sever to manage four of 6500 and about thirty of c2950.
    The kiwi server is working normally logging both 6500's syslog and c2950's.
    But I have question about difference between 6500's level informational and c2950's.
    For example, When I log in 6500 I can get a log from my kiwi server.
    And When I enter some command to change config I can also get a log from my kiwi server.
    However When it come to c2950 I can't get the logs. I can only get logs that notice 'interface up/down' or 'changed config' stuff like that.
    I think I have correct config about logging both 6500 and c2950 as follow.
    Trap logging: level informational, OOOOO message lines logged
            Logging to XX.XX.XX.XX, OOOOO message lines logged, xml disabled,
                   filtering disabled
    Anybody know what kind of log I can get with "level informational" on c2950.
    Thanks everybody.

    Information is a fairly low severity which means you'll get everything except debugging messages.  This includes link up/down, config change,
    CPU hog, etc.  If you're not seeing messages other than link up/down and config change, then there may not be anything else happening on the switch which triggers a log message.  Check the output of "show log".  That should agree with your syslog logs.

  • Using Log&Transfer with QuickTime files?

    Has anyone tried this? Is it possible? I have been given a drive with .mts files converted to quicktime. The file names are utterly meaningless. Example: I have 30 QT's with duplicate names in different folders, from different shooting days. Obviously I need to relog everything, give it scene/take info. Wondering if I can use Log & Transfer to log the QT files?
    The footage was shot 1080p, should I just bring in the .mts files thru log&transfer, ProRes?
    Suggestions and guidance very much appreciated.

    Thank you for your reply -
    The .mov files are Apple ProRes 422(HQ).
    As mentioned earlier I also have the original .mts files. Everything was shot AVCHD 1080p.
    Short of slogging through thousands of incorrectly labeled .mov files I was thinking of just starting fresh with Log & Capture of the original .mts files.
    One of the reasons I'm thinking of working with the .mts files and Log & Capture is that I can rename the clips while retaining the metadata of the original .mts files. My understanding is that this will preserve the link between the 'work print' and the camera original 'negative' so to speak. It will also afford me the easy ability to work in ProRes proxy and uprez later, tho I assume I can bring in the 'mov as proxy and do the same thing?
    I've been known to be totally wrong and thus, I am here seeking wisdom.

  • Hey I want to know what resolution a personas 3000x 200x is because I am trying to make one, but the middle part of the picure is movin to the left so some thing is wrong with resolution and interpolation. PS, I use Gimp.

    I use Debian and Gimp program to make my own personas but it seem like I have to know what resolution or interpolation is needed for the best result. I am trying to make one in size of 3000px wide x 200px high but don't know what resolution and interpolation is matching the requirements of Firefox or personas. For ex: in Gimp when scaling an image the interpolation possibilities are 4 like:
    None
    Linear
    Cubic
    Sync

    Try the Personas forum.
    * https://forums.mozilla.org/addons/viewforum.php?f=30

  • What resolution are ipad photos? The ones you take with the iPad itself.

    i'm trying to find out at what resolution ipad photos taken on the iPad are stored at. When I send them to myself and choose the largest size possible on the email, they are only 72 dpi. I thought there was an option for 300 dpi?
    THanks!

    I have a fourth generation iPad...I tried both email and direct download. The photos are largish - 26 inches  in width but the dpi is 72. As far as I can tell, that' sustain how it is, I can't seem to find any solid info on it. Thanks for trying, I appreciate it  

  • Error while executing Initialize with Data Transfer for 0FI_GL_10

    Hello All,
    Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
    First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
    We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
    The issue now is we are getting the following error message while running INIT with data transfer.
    Job terminated in source system --> Request set to red
    Message no. RSM078
    We have copied the data till July 1st week of 2011.
    Please advice. The issue is very critical.
    Thanks & Regards
    Sneha

    Hi Arvind
    Thanks for your inputs.
    Please find below the details of the short dump.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          09/07/2011 11:25:32
    Short text
         SQL error in the database when accessing a table.
    What can you do?
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    How to correct the error
         Database error text........: "ORA-01652: unable to extend temp segment by 128
          in tablespace PSAPTEMP"
         Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
         Please check the entries in the system log (Transaction SM21).
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    Information on where terminated
        Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
         "FETCH_TO_ISTRUCTURE".
        The main program was "SBIE0001 ".
        In the source code you have the termination point in line 903
        of the (Include) program "GP_GLX_FAGLFLEXT".
        The program "GP_GLX_FAGLFLEXT" was started as a background job.
        Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
        Job Initiator.. "BIWREMOTE"
        Job Number..... 11203300
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
         nor declared
        in the RAISING clause of its signature.
        The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
        840 of the (Include program "GP_GLX_FAGLFLEXT ".

  • Final Cut Express Log & Transfer Error No Data

    Hello all, after hours pouring through the threads with similar questions, I have had no luck. I have been using FCE for nearly two years, and have never seen this error message "No Data"
    Last night, I was in the middle of transferring clips from my Sony hdr xr520v using my MacBook Pro capturing on my external HD with over 200GB available. The transfer was going smoothly, but VERY slow - slower than I remember it ever taking. I thought I would be a bright one and switch from my Firewire port to my USB (I had been capturing via USB for about 6 months when my logic board fried and external drive was not visible via Firewire only USB) In any event, I'm boring you with the details so you can replicate the scenario. The transfer was working with Firewire but I switched back to USB illogical I know since Firewire is faster than USB, but I was going with prior 6months experience. When I connected the HD with the USB, all of a sudden I got the No Data error message. I promptly switched back to Firewire, but I am still getting the message! What have I done?
    I checked my settings - Log & Transfer is set to AVHD Plug in and Plain Stereo. Both audio and video are checked, FCE is set to HDV- AIC 1080i50.
    I can not log & transfer ANY clips into FCE (not even the ones already imported last night) I can, however import all into iMovie (which I know doesn't care about all the stuff FCE cares about but helped me eliminate the possibility of corrupt clips).
    ANY help would be MUCH appreciated

    I thought you had to use USB 2.0 to log and transfer AVCHD . . . . definitely not Firewire?
    I suggest you trash the preferences as detailed in the link below and start again with the correct Easy Setup and using USB 2.0.
    http://www.fcpbook.com/Misc1.html

  • HELP: AVCHD Log & Transfer idle problem for iMac 27"

    I just bought an Apple iMac 27" but I cannot do a Log & Transfer.
    I used the same SDHC card that I log & transfer succesfully in the old 24" iMac.
    But when I did a Log & Transfer in the new 27" iMac, I got into this:
    1) FCE4 can detect the card & show all the thumbnails without problem.
    2) When I drag a clip into the bottom or click add to queue, it says transferring clip#6 .... but the progress bar didn't move ...
    3) after a while, it says 1 clip idle ....
    what happen ? how come the clip#6 cannot be imported ? I tried all the clips, but faced with the same problem, it ended up says idle but nothing was transferred to the browser !!
    Any ideas ?
    Thanks

    ok guys,
    problem resolved by doing this:
    1) right click on the clip
    2) goto preference after right clicking on the clip
    3) Under AVCHD plugin > AC-3 > Plain Sound
    I dunno why it works but after changing from the default Matrix Sound to Plain Sound, it can import so fast ! This new iMac 27" is so much faster than my old 24" iMac ...
    If Matrix sound doesn't work why is it there in the first place ?
    Cheers

Maybe you are looking for