What's happened to my board? (MSI KT4AV-L)

I have a bit of a problem,
I have a MSI KT4AV-L with a AMD Athlon XP3000+ Processor.
Here's the mail i've just sent to the tech support of where I got the board from..
Quote
Yesterday, I started to have problems with the internal network port - it was not finding the my gateway, however when I tried the exact same cable and router port on my laptop, it all worked fine.
I decided to reformat and re-install windows XP, in case it was a software error, however this still didn't solve it.  The basic problem was that I was getting Timeouts - I tried pinging the router and it was a mixture of successes and failures.
I went into the BIOS and changed back to "Default" settings and restarted - this has made matters worse - now my Graphics card is not working correctly and i'm not able to see anything on the monitor at all due to this.
These facts have made me feel that the Motherboard kid is faulty - I also noticed that the XP3000 chip I had was only showing up in windows as a 1.9ghz processor - not sure if this is correct or not.
Do you have any suggestions or can you give me a manufacture contact so I can try and resolve this issue without needing to send it back - I would appreciate a quick reply as I use this machine for work and it is causing me to delay some freelance projects that I am working on.

Hello,
Did they get back to you?  
Please make a list of all your components, including the power supply + details of the sticker.
eg,
+12v = 10a
+5v = 20a
XP3000+ is 2.16Ghz
You need to enter the BIOS and set the FSB to 166Mhz.
Press DEL when you turn the PC on or restart,
go to Frequency/Voltage control > press enter
FSB > press enter, change it to 166Mhz. >press enter
press escape, then goto save and exit > Y > press enter
So that is one problem out of the way.
GFX card problem, is your card AGP 4x or 8x?
Now would be a good time to post that list

Similar Messages

  • Msi kt4av problem - overlay??

    Hi,
    I can't get rid of a very serious problem. I have bought a MSI KT4AV board together with AMD Athlon XP 2500+ Barton processor and ATI Radeon Graphics card. I get very weird things on my screen every time I want to play a movie or see a picture in the standard Windows XP picture browser. I don't see any JPEGs in IE either. I thought the reason for this was the incompatibility between the ATI card and the VIA chipset and exchanged this board for MSI nVidia GeForce FX5200. I also changed the motherboard with another piece of the same type but the problem still remains. To give an imagination of what happens: http://www.volny.cz/smudlicek/screen/screen.jpg . I am a little bit desperate. I don't think the problem could be in the processor I am still suspicious about the board. Any clues??? Thanx
    Maacek

    Quote
    Originally posted by Fredrik Åsenius
    4in1 drivers installed properly?
    Changed anything in BIOS?
    If it is mostly jpeg, I would check the file association. In my system there is no program assigned, /Explorer/Map alternatives in ME and in Swedish).
    It doesn't display jpegs well on webpages. The 4in1 drivers are installed, BIOS unchanged. File assosiations are for sure not the cause for this problem.

  • Help on MSI KT4AV(MS-6712)

    hi
    i have assembled a pc using......
    Motherboard -    MSI KT4AV(MS-6712),
    CPU -       AMD Athlon Xp 2200+,
    Graphic Card -    MSI G4 MX440-T8X (8895),
    Ram -       Hynix 256MB DDR (     ),
    HDD -       Samsung 80GB 7200RPM (SP0802N),
    Combo Drive -    LG (GCC-4480B),
    Sound Card -    In-built,
    Monitor -                    Samsung 15",
    Modem -                    Internal (Smartlink 56K ),
    PS -       Un-branded good quality,
    there are some problems,
    1) i am unable to get the pictures on my TV screen,
    i dont know how to connect the TV-OUT connector to my TV.
    2) my system was showing athlon XP 1500+ before but after i visited the AMD's     Forum i got the clue to make it 2200+ by increasing the FSB setting from 100 to 133, now it is showing 2200+.
    3) i have seen this line in one thread here in this forum that
    (* do not install or uninstall any VIA AGP drivers, including those in VIA 4-in-1 drivers...) , if i should not install this driver then will it be OK not installing this driver...?
    4) (KT4V BIOS version 1.7 and above fixes the CRC errors (IDE problems that cause crashes) ) , and i have this new motherboard KT4AV with BIOS v(     ) ,
    but i am having this problem as the system crashes and hangs or blue screen appears and does not support this harddisk, and i have to use a samsung tool to downgrade the UDMA mode of the HDD to 100 MBPS,
    (This program will change the UDMA mode of all UDMA 133-supporting Samsung drives in the system)and the samsung says thatthe cause is...
    Cause
    This issue is caused when the data transfer rate between the motherboard (or host system) and HDD is erroneously set beyond the maximum data transfer capability of host, 100MB/sec. Under this environment, the host system fails to read data correctly from HDD resulting in unsuccessful OS installation.
    Please note that this issue is caused by the incompatibility between the motherboard and HDD(s), not by the faulty Samsung hard disk drive.
    Now should i have to use my system at 100 MBPS speed as my HDD supports 133 MBPS...?
    5) what is the use of the (IrDA Infrared Module Header: JIR1), how can i use it?
    6) and the last question is this board has (6-channel software audio codec ), how to use it? ans i don't have the S-Bracket as i did'nt get it with my motherboard, and i want to use the 6 channel output from my PC , please help me how to use it ...
    thanks
    please help me ,,,,

    1) Not sure, see p. 3.
    2) Is pretty normal procedure around here.
    3) Who on earth might have written that? But I suggest you enter 'Safe Mode' when installing 4-1 drivers. You had better have them.
    4) Not sure, see p. 3.
    5) Someone must confirm this, but I think its for remote networking.
    6) If you have integrated or other sound card, drivers, cables and speakers there is no problem. See the manual, please.

  • [VIA] related to msi kt4av (ms 6712) mainboards

    hi! I've got a msi kt4av and a few things bother me!
       1 the cpu voltage is higher than I set it in windows: I set it to 1.65 but it goes to 1.675 in reality! this goes for all of the voltage values. anyone got this problem?
        2 I'd like to buy a new hdd, preferably over 200 gb! on the faq of the board it says that the max supported is 160 gb, but I have doubts it has been updated anywhere recently!
        could those of you that have or had this mainboard, help me out a bit? thanks

    if a mobo says the max supported HDD size is over 137gb, (eg 160gb) then any size above that (eg 200gb) will work. after the 137gb limit on older boards, the next max size limit i believe is somewhere around 4 terabytes
    as for CPU voltage, you should set that in BIOS, and preferably to AUTO, unless you're overclocking and know what you're doing windows utilities don't always read values correctly

  • MSI KT4AV no boot issue

    I'm having a heck of a time getting my computer to boot back up I get 3 long beeps. This does not match anything I've found for codes. I went back in and installed the D-Bracket 4 LED diagnostic bracket.
    This "normally" should show 4 red LED's on boot up. I get 3. The number 1 LED is dead, nothing showing. It then goes to number 2 and 4 red and number 3 green. It stays there and goes through the 3 long beeps.
    Is it RAM or is it memory ???
    anyone know for sure ??

    Well, I was going to post all teh specs...but. I was getting pretty frustrated with it when I "re-set" the power switch on the back of the PWS. I'm running an ANTEC Sonata box and PWS. When I turned the switch off and on at the back I was able to boot up to a point.
    I had jumped the CMOS earlier thinking it was the problem. So I had to go back through and reset all the setup config...that done it works like a champ again....
    I had reset the Vcard and Memory, no help. I had a guy at a computer store tell me the 2 sticks X 256 were not compatiable and that was causing the trouble. He was a little perplexed when I told him it had ran like that for months....He did want me to bring the box in so he could fix it....wonder what that would have cost ?? I guess if you replace enough parts it will work...
    Bottom line : 3 lond beeps with a MSI KT4AV board VIA chipset and ANTEC PWS try turning it off and on at the back...worked for me.
    Never was able to find an actual listing for those 3 long beeps...

  • What will happen if I don't use apple's hdd?

    My HDD is passed away.
    I'm using Macbook Unibody(A1342) and I will replace the HDD.
    I heard that Apple's HDD has a temperature sensor.
    So that If I don't use that, it will be a problem, as I heard.
    What will happen if I don't use the Apple's HDD?

    The tempeture sensor is on the logic board not the hard drive. Apple doesn't make any hard drives they buy them from other manufacturers.
    For a new hard drive try Newegg.com  
    Regular SATA drives http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE  Use the list at the left for larger and faster drives.
    SSD drives
    http://www.newegg.com/Internal-SSD/SubCategory/ID-636?Order=PRICE  Use the list at the left for larger and faster drives.
    Or OWC for regular hard drives and SSDs  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
    To transfer your current hard drive I like the applications Carbon Copy Cloner or SuperDuper. They make a bootable copy of everything on your hard drive. http://www.bombich.com/index.html or http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html 
    You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
    Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • What's happening with cold fusion?!

    first, this very page is throwing js errors in both ie8 and firefox 24.0  , i can't reply to any posts
    then, with all this flurry of security breaches on gov websites running cold fusion, do we have a comprehensive white paper showing how to plug all the security holes that were uncovered?

    Thanks Carl,
    when clicking the reply link on the forum, in ie8 i get:
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1;
    Trident/4.0; (R1 1.6); .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
    .NET4.0C; .NET4.0E; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729;
    InfoPath.3)
    Timestamp: Mon, 18 Nov 2013 15:26:45 UTC
    Message: Not implemented
    Line: 1616
    Char: 13546
    Code: 0
    URI:
    http://forums.adobe.com/4.5.6/resources/scripts/gen/220b1b06a29f901e1d24252ac800883e.js
    and in fireFox:
    ReferenceError: $ is not defined
    https://www.adobe.com/account/sign-in.adobedotcom.html?returnURL=%2Fcfusion%2Fmembership%2 Findex%2Ecfm%3Floc%3Den%5Fus%26nl%3D1%26ref%3Dlogin
    Line 70
    ion amariutei | [email protected] | 212-578-1011
    From:
    Carl Von Stetten <[email protected]>
    To:
    ion <[email protected]>
    Date:
    11/18/2013 11:19 AM
    Subject:
    what's happening with cold fusion?!
    Re: what's happening with cold fusion?!
    created by Carl Von Stetten in Advanced Techniques - View the full
    discussion
    Site seems to be working fine for me.  As to plugging security holes,
    there are two things you need to do:
    1.      Keep your servers updated with the latest patch(es).  If you are
    on CF10, use the built-in automatic updater.  If on CF8 or CF9, take a
    look at David Epler's Unofficial Updater project.
    2.      Follow the appropriate ColdFusion lockdown guide for the version
    you are running.
    For CF9:
    http://www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/910
    25512-cf9-lockdownguide-wp-ue.pdf
    For CF10:
    http://www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1
    0/cf10-lockdown-guide.pdf
    -Carl V.
    Please note that the Adobe Forums do not accept email attachments. If you
    want to embed a screen image in your message please visit the thread in
    the forum to embed the image at
    http://forums.adobe.com/message/5851524#5851524
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/5851524#5851524]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/5851524#5851524]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Advanced Techniques at Adobe Community
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/thread/416458?tstart=0.
    The information contained in this message may be CONFIDENTIAL and is for the intended addressee only.  Any unauthorized use, dissemination of the information, or copying of this message is prohibited.  If you are not the intended addressee, please notify the sender immediately and delete this message.

  • MOVED: RMA Process for my board MSI NEO2

    This topic has been moved to Anything Under The Sun.
    RMA Process for my board MSI NEO2

    The first guy I spoke with trying to find out the status on my RMA did have a firm grasp on the english language - so I trust when he said, and I quote, "The testing department found nothing wrong with your board, so we're sending it back (to you)."
    The second gentleman I spoke with a week later trying to find out where my board was didn't have english quite mastered fluently, but was able to give me the information I needed.
    Generally though - what I usually understand (doing RMA's for a company myself) is that if someone RMA's something, you generally ship out a REPLACEMENT anyway, so this may be the case.  I sure hope so.
    This has been quite a puzzling experience from day one anyway.
    SunnyD

  • Can I get the value for community site's What's Happening web part with Powershell?

    I need to generate some statistic reports for our SP2013 community site. Some of figures I need are "no. of discussion", "no. of replied" and "no. of members" which are already listed in the "What's Happening" web
    part.
    Can I directly get this counters with PowerShell instead of calculating from "Discussion Board List"?

    Hi,
    As we can see from “Site Contents” page, the data displayed in the “What’s happening” stores in these two lists “Community Members” and “Discussion List”, if you want to retrieve
    the data using PowerShell, we will need to access these two lists directly.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

  • MSI KT4AV and PSU FAN connector?

    MSI KT4AV has 2 fan connectors: CPU FAN and System FAN. What about PSU FAN - is there PSU fan connector on this mobo? Can I connect PSU Fan to System Fan connector?
    LeHardi
    Jarek Kus

    I've read that PSU Fan is not powered from Fan Connector, but it's only uses it to measure RPM of PSU Fan. RPM of PSU fans is controlled by PSU (Chieftec 360W HPC-360-202 DF). Is amperage so important in this situation? Sorry, if it's lame question but I don't know too much about PSU's. ;-)
    LeHardi
    Jarek Kus

  • MSI KT4AV 4 RED LEDs WON'T BOOT

    Hi.  I recently purchased a new MSI KT4AV motherboard, new AMD Athlon 1.33 Ghz CPU, and new PC2100/DDR266 DIMM RAM, and when I turn it on, all 4 LEDs on the diagnostic bracket light up RED (meaning processor failure).  Does anyone know what could cause this?
    My system specs:
    MSI KT4AV motherboard
    AMD Athlon 1.33 Ghz 200 FSB CPU
    PC2100/DDR266 DIMM
    420W PSU (+3.3/28A, +5/40A, +12/18A)
    Hopefully that's enough to diagnose any problems because it won't output any video, just 4 red LEDs on the D-bracket.
    Thanks.

    Hello,
    When I bought my second KT4AV, I was planning on using an Athlon T-Bird 1.4 I had laying around in it.  It had the exact same problem as you are having, it just didn't work.  I then tried a Palomino 1700+ I had in a another computer that I knew worked fine - it was (and still is) in a K7T266 Pro2-RU - and it didn't work either.
    I was thinking the motherboard was bad but I bought an Applebred Duron 1600, and it worked perfectly!  So it would seem that even though they are listed as compatible, the older Athlon T-Birds and Palominos simply will not work.  My advice to you, buy an Applebred Duron, or better yet, an T-Bred XP 2000+.
    Sorry if that wasn't what you wanted to hear!
    -James

  • MSI KT4AV

    Hi on the box of a motherboard write that name of mother board is 694T PRO but on Home Everest software name of Motherboard is MSI KT4AV (MSI-6712) (6 PCI, 1AGP, 3 DIMM, Audio). I need lan driver for that mother board?
    I have 2 cd's from MSI CD 1CD2

    Quote from: BOSSKILLER on 07-November-07, 03:58:50
    Please exact ID your mainboard, look here how: https://forum-en.msi.com/index.php?topic=107777.msg798546#msg798546
    Have you installed Via 4 in 1, 1st too?

  • Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason.  The recipient is not new.  This issue happens on reply or reply to all or froward; not a new email. What is happening?

    Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason.  The recipient is not new.  This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?

    I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
    In the mean time I used the .me smtp server settings which allowed me to send mail.

  • I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

    I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
    What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
    From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
    Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

    sydababy wrote:
    and then deleting them off of my computer.
    BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
    Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
    The number of people who have experienced terror by having a single external HD backup is enormous.  One failure that WILL HAPPEN, and kaput,......all gone!
    Dont do it, its all about redundancy, redundancy, redundancy.
    follow here:
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    Deleting them off your computer is fine....having only ONE copy is extremely BAD.
    The Tragedy that will be, the tragedy that never should be
    Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
    Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
    Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
    Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

  • What is happening with my new line install?

    Hi,
    I don't normally post on anything like this, but feel I am being left no alternative, other than cancelling my order.
    I am a new customer to BT and on the 14th of May I placed a order for a broadband and phone package, which was to include a new line installation on the 5th June between 8am and 1pm.
    I also ordered a new phone system and dual wifi dongle which all turned up as expected.
    On the 5th June I took a day off work and waited until just after 2:30pm for the engineer not to turn up.
    I received no call, text or email telling me that the appointment had been cancelled, it took me to call BT and finally manage to get to speak to somebody human to find out that it had apparently been delayed.
    First I was speaking to somebody from the UK the next I was put through to order management in India, which started to infuriate me more as the line was really bad and I was calling from my mobile for then to have them hang up on me.
    I called back a further 3 times after being passed from pillar to post to eventually get put back in touch with a order management lady in India again.
    She told me that the problem was with openreach as they reckoned they had tried calling me on the 14th May (when I placed the order) to which I replied I had not received any phone call from them.
    They wanted to know if it was a first or second line installation, I replied 5 times with it is a separate line that needs to be installed and I still don't think she understood after that.
    I was then told I would get an update on the 12th June between 8am and 8pm as to when the line was going to get installed, to which I did and again was a bad line as the call came from India just to be told there is another delay which will be the 19th June.
    At this point I'm beginning to lose my patience, I had waited nearly a month for the line installation to happen to be told that there was another delay which would take another 7 days before somebody updated me again.
    After I put the phone down I received a text from BT sms saying they had tried to contact me but we're unable to do so but not to worry they will be back in contact on the 22nd June?
    Very strange seen as I had just spoken to somebody and was told the 19th June.
    I rang back through to BT and got put through to India yet again where the signal was poor and asked that somebody call me from the UK as nothing seems to be getting sorted.
    Within 10 mins I got a call back and was put through to BT in Dundee, I explained the whole situation over again and was told they would be looking into the problem and would get back to me later on the same day the 12th June.
    It is now the 17th June and I still have no answer as to when the line installation is taking place, so I can start using the equipment I have paid for.
    if I knew in the first place that this was going to be a problem I would have used a different provider other than BT, as a new customer I find their lack of communication and generally not seeming to give a **bleep** about customers poor, with my only choice then being if I don't get the answers I want on the 19th June I will cancel the order and send everything back for a full refund and would advise others not to use BT in the future.
    Sorry for the rant and this being my first post but I am beginning to lose my patience any help would be appreciated.

    Hi lda1979, 
    Welcome to the forum and thanks for your post. 
    I am so sorry that your order has been delayed and you are not getting any information on this. 
    Can you send me in your details using the "Contact The Mods" link found in my profile and I will find out what is happening. 
    Cheers,
    OlgaC 
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for