What should should the "Section Number" text variable display?

Regarding the updating text that comes from "Insert > Section Number" and is placed in a layout...
It seems that this text should always update with the section number, as the title states. However, each time I use it/test it, it displays the book title. Is this a normal occurance (and I am just confused by the name?), or should it be displaying something else?
Thanks in advance.

See: Publishing With iBooks Author
http://shop.oreilly.com/product/0636920025597.do

Similar Messages

In the filter the value of text variable is not shown, only technical name.

Hi All,
We have some odd behavior of text variables in the filter screen of key-figures.
After entering values in the variable screen, the report is executed.
Within the report all text variables are filled, with the values entered in the variable screen.
I say all, because we use both sap standard variables &0T_FPER& as customer specific &ZFSCYR&.
When i want to change the key figures showned, i press the filter icon for key-figures (BW 3.5)
In the list shown: existing filtervalues, the textvariables of SAP standard are filled with the value entered in the variable screen. However the customer specific is shown with the technical name (&ZFSCYR&) and not the value.
Has anyone experience with this behavior or even better a solution to prevent this?
As allways, each usefull answer points assigned!
Regards,
René

Hi Rene,
If ur custom text variable is not getting populated then you need to check out the code that u have written in there in CMOD for this and ofcourse if ur using this text variable after report execution then it will definately be in i_step 2.
So best way is to debug your code and check that using code RSRT.
Thanks
Dipika

Operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?

operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?
How to reproduce the issue：
1.Create a new PPT slide in Office2010.
2. Insert a certain text/characters, such as Mircosoft blablabla,
3. Insert an URL right after the text part , TextToDisplay is the “Test”，Address is the "Url".
4. The content in the ppt is ”Microsoft Test“，here "Test" is the hyperlink which we would like to convert. Please execute the code we list below.
5. The problem will be reproduced by the above steps.
PPT.Application ap = new PPT.Application();
PPT.Presentation pre = null;
pre = ap.Presentations.Open(mFileName, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (PPT.Slide mSlide in pre.Slides)
PPT.Hyperlinks links = mSlide.Hyperlinks;
for (int i = 1; i <= links.Count; i++)
PPT.Hyperlink mLink = links[i];
mLink.TextToDisplay = mLink.TextToDisplay.Replace(mLink.TextToDisplay,"url");
mLink.Address = mLink.Address.Replace(mLink.Address, "url");
Modify texttodisplay, the address vaule will be assigned as null. Anyone knows how to solve it?
Does it caused by a PPT API's Limitation?

I've tried the below code and it works, you can refer this article:
https://msdn.microsoft.com/en-us/library/office/ff745021.aspx
to find that the hyperlink needs to be associated with a text range, and thats what I did in the code below with the help of the link sent by Tony.
Microsoft.Office.Interop.PowerPoint.Application ap = new Application();
Microsoft.Office.Interop.PowerPoint.Presentation pre = null;
pre = ap.Presentations.Open(@"C:\Users\Fouad\Desktop\abcc.pptx", Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (Microsoft.Office.Interop.PowerPoint.Slide mSlide in pre.Slides)
Microsoft.Office.Interop.PowerPoint.Hyperlinks links = mSlide.Hyperlinks;
Microsoft.Office.Interop.PowerPoint.Shape textShape = mSlide.Shapes[1];
for (int i = 1; i <= links.Count; i++)
Microsoft.Office.Interop.PowerPoint.Hyperlink mLink = links[i];
Microsoft.Office.Interop.PowerPoint.TextRange range1 = textShape.TextFrame.TextRange;
TextRange oTxtRng = range1.Find(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay,After:range1.Start,WholeWords:Microsoft.Office.Core.MsoTriState.msoTrue);
oTxtRng.Replace(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay, "url");
oTxtRng.ActionSettings[Microsoft.Office.Interop.PowerPoint.PpMouseActivation.ppMouseClick].Hyperlink.Address = "http://www.microsoft.com";
Fouad Roumieh

What cases fit the new ipad with retina display?

What cases fit the new ipad with retina display?

http://www.ipadcasereview.com/ipad-3-cases-and-covers-top-of-page/#sthash.hZKnxH ku.dpbs
these are the best

What is the include for text variable?

Dear Friends
I am trying to add a customer exit for text variables.
I have done variable exits for things like fiscal period but not for customer exit TEXT variables.
I could not find any text variable code in the include ZXRSRU01 .
Please advise what should be the program name?
Is it found in a different include?
regards
Bass

Hi Bass,
Customer exit for text variables is also the same how we create customer exits for characterisitics variable. As per the clarity what i got from ur question.
I'll just explain a small program in customer exits which will act as a text variable.
Go to SE38 -->
Display the program ZXRSRU01 --> (This can be done only if you have added the enhancement of the system from CMOD)
Then add ur following case statement to the existing code.
After all the data declarations start ur main program
when 'YEAR_CUST'.
if i_step = 2.
    l_year1 = sy-datum+2(2). //Data declaration
    l_mon1 = sy-datum+4(2). // Data Declaration
   l_date1 = sy-datum+6(2). // Data Declaration
     case l_mon1. //case statement which has the technical name of ur Exit variable
     when '01'. // This statement generally checks the whether the given variable entry has a value '01' then enters the statement here and returns the value as JAN //
          CONCATENATE 'JAN' l_year1 into dat.
          l_s_range-low = dat.
          l_s_range-high = l_s_range-low.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
          endcase.
         ENDIF.
Hope this helps u and have given the explanation as per the understanding of your questionand can give more clarity to you.

Re: what happens to the online number after expiry...

I recently got a skype number. I spread it out to my friends. Now I also get calls from somebody I don't know - apparently this number have been used. What should I do?
Also, I don't want my contacts to (mistakenly) call some other person should I decide to terminate the subscription.
I think it is a serious issue and the phone number should be erased permanently after 90 days of being expired, and not being re-selled. If I knew about it before I subscribed - I would perhaps decide not to.

Hi,
After number expires it is reserved for the same account for another 90 days.
Later on it goes back to the general pool and can be purchased by anyone.
It is not an one time payment.
I hope it helps
If my answer helped to fix your issue, mark it as a Solution to help others.
Thank You!
Please send private messages only upon request.

Stolen IPad What impact has the serial numbe rin such a case?

my ipad has been stolen. What happens if the "new" user has resetted it and then connects to iTunes? The serial number of the iPad is assigned to my account/appleID. Will he get a problem to open a new account with this iPad? Has this somehow an impact or not? Or can the serial number be assigned to various accounts?? Can I do anything in order to prevent the new user using my iPad?

Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with your bank or any savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

What makes up the section of I Pod Capacity Titled "Other" in Summary

On my I Pod (Video), under summary, it says I have 4.02 GB of Audio, 14.05 GB of Free Space and 9.75 GB of Other and I would like to know what exactly is in that Other section in case I can clear some of that out. Please help me!!!!!!!!!!!! I have searched everywhere for this answer and can't find the answer.

Hi John.
I don't know specifically what is in the "Other" section but I would suspect it would be album art, lyrics, operating system etc.
hope this helps

I've lost my list of passwords. How can I read what's under the asterisks as text

AS I've lost all my written lists for my ipad passwords is there an app so I can read what's under the asterisks, or any other way?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

What's with the version number mess?

So,
10gR3 = 10.3.0
11gR1 = 10.3.x, where x >=1 (so 10.3.1, 10.3.2, 10.3.3 are all considered "11gR1")
Correct?
And in the future, 11gR2 will probably be 10.4.x, only starting with with x=0 ?
Also, does "Patch Set x" apply to WebLogic server or is it only used for SOA Suite? In other words, is it correct to claim that:
WebLogic Server 11gR1, Patch Set 1 = 10.3.2
WebLogic Server 11gR1, Patch Set 2 = 10.3.3
etc.

akarypid wrote:
So,
10gR3 = 10.3.0
11gR1 = 10.3.x, where x >=1 (so 10.3.1, 10.3.2, 10.3.3 are all considered "11gR1")Overall this is mostly due to the large number of Oracle products leveraging WebLogic after the BEA acquisition and not wanting to change the WLS foundation heavily while those products certified and migrated to the 10.3.x release of WLS.
So your chart is mostly correct but there is a little more
11gR1 GA = 10.3.1
11gR1 PS1 = 10.3.2
11gR1 PS2 = 10.3.3
>
Correct?
And in the future, 11gR2 will probably be 10.4.x, only starting with with x=0 ?I think in the future you'll see the WLS technical version (eg WLS 10.3.x) more closely align with the FMW branded version (eg. 11g R1).
>
Also, does "Patch Set x" apply to WebLogic server or is it only used for SOA Suite? In other words, is it correct to claim that:
WebLogic Server 11gR1, Patch Set 1 = 10.3.2
WebLogic Server 11gR1, Patch Set 2 = 10.3.3
etc.Patch Sets are consistent throughout FMW releases. So 11gR1PS1 has a WLS release and a SOA Suite release that align.

Why text variable displayed as itself.

Hi expert,
I create a text variable for a key figure, which is restricted by a variable for 0CALDAY. but when run the query. this KF is displayed as text variable name , such as &...&. so what is wrong with definition.
Many Thanks,

I believe you have used system font or applied effects which would convert the text into image on export. I would suggest you to use web safe font and then export which will resolve this issue.
More details : http://helpx.adobe.com/muse/using/typography.html
Regarding center position of contents in page , you can use Pin feature and pin the objects on page.
More Details : http://helpx.adobe.com/muse/using/objects.html
Thanks,
Sanjit

Changing the default number of rows displayed in a interactive report

Hi,
I have a sql query based interactive report but i cant change the default number of pages i.e 15.
is there any way to change the number of rows displayed.
Thank you,
rakesh

Hi,
That was very useful document that you shared, yes that is correct we can so it this way but there is another way doing it where in if you go to the report attribute section and in that there is Layout and Pagination and under
that you can fix the number of rows, and over there we can also accept values from page item such as if the page item value changes the number of rows displayed in the report changes dynamically.
In my report i get only pagination but not a option for layout.
Any help will be appreciated.
And also where i can get the links to the similar document that you have shared ?
TY
rakesh
Edited by: rakesh119 on Apr 30, 2013 12:10 PM

What determines when the My Timesheet item will display in the Resource Availability Page?

Can someone point me to where I can get more information on the My Timesheet item that displays in the Details section of the Resource Availability page? I cannot figure out where this information is coming from or what determines how many My Timesheet
lines you see.
In one Project Server environment, I noticed that each user had 3-4 My Timesheet line items in the Resource Availability page. The period I was looking at spanned 8 weeks and all of those weeks were in the future. I checked the Manage Timesheets
page for one of the users that had 4 My Timesheet items in the Resource Availability page. The user did not have any timesheets created for the 8-week period I was reporting on in the Resource Availability page. To make matters more confusing,
some resources only had 3 My Timesheet line items in the Resource Availability page for the same period. So it seems like something other than active timesheets for the period is dictating how many My Timesheet lines display. Also curious was the
fact that ALL of the My Timesheet items for all users in the Resource Availability page (7 or 8 people) showed "0h" for all of the periods displayed.
I decided to look into this further in a separate Project Server environment, because I didn't have access to the first one at the time. Both environments were configured to not use single entry mode and used resource plans to calculate allocation.
In this second environment, I entered hours against an administrative task classified as non-working time for one week and submitted / approved this sheet. I entered hours against a project task for a second week and submitted / approved this sheet.
I then used the Resource Availability page and "reported" on a period including those periods (20-week period total). I didn't see a single My Timesheet item. Not even any showing the "0h" designation I had seen in the first environment.
So long story short, I cannot figure out the criteria that dictates when a My Timesheet item displays. And I also can't figure out the purpose. If the Resource Availability page is designed to show planned work (either through the planned allocations
stored in resource plans or planned assignments through project schedules), what is the point of the My Timesheet values? Wouldn't planned work be captured in the project line items? If it's for administrative, non-working time only, why would
the My Timesheet items not show up in the second environment scenario? Any help / insight would be appreciated.

Hi,
After investing a lot of time i found one link which is talking about My Timesheet in resource availability page.
I believe link providing proper explanation though i would like to test it on my system.
http://social.technet.microsoft.com/Forums/en-US/projectserver2010general/thread/83e46a4d-3c05-4dda-8566-669b12b673f4
kirtesh

How to change the max number of member display in Target Group

Dear Experts,
We are using 2007 CRM Marketing.
When I search and open a Target Group it displays me maximum of 100 entries of members over 11 pages. how do I increase or decrease the max number.
Appricate you help.
Thanks,
Shabbir Hussain

Hi,
you can set the number of members that will be displayed in target group.
Go to any profile group -> open the graphical modelling -> open settings.
Here you can ajust the displayed number of members in a targetgroup.
These settings are user-dependent and saved in table CRMD_MKTTG_PERS.
Regards,
Claudia

What's with the Blue&Green Text (sent as text message

Hi
well i just want to know why sometimes my text appears in green and sometimes blue
this is an example did she/he received the message?
http://i.imgur.com/nsn4xSK.png?1
when i first sent the message was blue now i sent another text yesterday and its green and didnt get any message back from that person -.-'

Blue means you are using iMessage, green means you are using SMS:
https://www.apple.com/ios/messages/
Cheers,
GB

What should should the "Section Number" text variable display?

Similar Messages

Maybe you are looking for