Which datasources covers these tables :

Hi,
which datasources covers the following tables :
Table
lfa1
adrc
adr6
bnka
lfbk
tiban
lfb1
T001
lfbw
T052
T042
lfm1
T024e
wyt3
tpart
Many thanks in advance.
BR//
M. Sajid

Hi,
The way to find the datasources where these tables are used can be :
1. Go to SE11, give table name ROOSOURCE
2. Go to contents of the table with all entries
3. Give your table name, you can find the datasources where these tables are used.
4. Remember the field in table selection, EXSTRUCT has to be selected
The above steps are to be performed in ECC.
Hope this helps,
Regards,
Rama Murthy.

Similar Messages

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

How to find which datasource is using table JCDS?

How to find which datasource is using table JCDS?

Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022     Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022     Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022     Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS     MANDT     =     JSTO     MANDT
JCDS     OBJNR          =     JSTO     OBJNR
T000     MANDT     =     JCDS     MANDT
This DS has enhanced for the below two fields
1.     Order Number
2.     Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR

Find the schema which contains all these tables

In my DB, only SCOTT has all the three tables EMP,DEPT, BONUS. There are schemas which have either one or two of these tables but only SCOTT has all these 3 tables.
To find the schema which contains all these *3* tables. I tried the below mentioned queries which gave the wrong answers.
1.
select TABLE_NAME, owner from dba_Tables where table_name IN ('EMP','DEPT', 'BONUS')-- will return any schema which has any of these tables. So, wrong result
2.
select TABLE_NAME, owner from dba_Tables where table_name = 'EMP' AND TABLE_NAME='DEPT' AND TABLE_NAME= 'BONUS'-- Wrong result because it is mutually contradictory. As AP has mentioned below, A table_name cannot be equal to all the three tables .
Edited by: GarryB on Dec 22, 2010 7:56 AM

Hi,
GarryB wrote:
Thanks everyone. So, this means that this seemingly simple query cannot be written with just a plain AND , OR . Right?You're right. Every query needs SELECT and FROM, for example.
What's wrong with Solomon's simple solution?
Whatever you don't like about it, I'm sure there's another approach that doesn't have the same problem, even if it is slower and more complicated.
As AP pointed out, no one row has all the information you need to decide if that row will be part of the result set or not.
You need something that can make a decision based on the data in multiple rows.
GROUP BY, like Solomon suggested, is the easiest and most efficient way I know of.
Anything that GROUP BY does can probably be done by analytic functions. In this case, it will be more complicated and slower, but you can get the same results.
A self-join, as user13524665 demonstrated, is another way.
You could also get the results you want using EXISTS-, IN-, or scalar sub-queries, all of which would be even more complicated, and scale just as poorly, as a self-join.
CONNECT BY, recursive sub-queries, MODEL, and XML functions can also look at several rows at the same time. I don't believe you want to read and test soltuions for all of these any more than I want to write all of them. Solomon gave a good solution for your original problem. If you want to add some extra restrictions to your problem (such as "I can't use ... or ...") explain clearly what those restrictions are, and why you need them.

Which datasource has PAYR and REGUH tables

Hi,
Can anybody please tell me PAYR and REGUH tables are from which datasource.
Thanks in advance for all your help.
Points will be rewarded.

Customer Enhancements of the Extraction Structure
You can enhance the extraction structures for DataSources 0FI_GL_4, 0FI_AP_4, 0FI_AR_4, and OFI_TX_4 in the SAP R/3 system by creating user-defined include structures or using transaction RSA6. The following customer includes are supported:
Application --- Accounts Payable
DataSource --- 0FI_AP_4
R/3 Table --- BSID / BSAD
Include Structure --- CI_BSID
· If all fields in the customer include structure are contained in the above-mentioned R/3 table, no further ABAP programming is required. In this case, the fields in the customer include structure are automatically supplied with data by the DataSource extractor.
· If there are fields in the customer include structure that are not contained in the above-mentioned R/3 Table, these fields cant be filled using a function module created by the user. For more information see note 410799. Alternatively you can use the BW standard exits for extractor enhancements. Programs from the SAP standard are not modified by this customer interface.
Please check out...
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm

How to enhance the datasource 0SRM_TD_PO using table BBP_PDIHP

In R3 when any PO is deleted at the header/item level the field LOEKZ is populated in tables EKKO(Header)/EKPO(item level).
Similarly in SRM when any PO is deleted at the header/item level the field DEL_IND is populated in tables BBP_PDHGP(Header)/BBP_PDIHP(item level). In current situation we have standard datasource 0SRM_TD_PO, this has a field as ITM_DEL_IND which is coming from table BBP_PDIHP(item level) and its always blank and its not getting populated , so we are not able to eliminate the deleted PO's in BW.
To overcome this, I have a following approach :
=====================================
Enhance the datasource 0SRM_TD_PO to include a "ZZDELIND" field and populate this field via CMOD from tables BBP_PDHGP(Header)/BBP_PDIHP(item level). The issue is I'm not able to determine the relation/join/data model between the datasource and the tables. The datasource 0SRM_TD_PO has a PO#(OBJECT_ID) but the tables BBP_PDHGP(Header)/BBP_PDIHP(item level) dont have a PO# instead these tables have a key as "GUID"which is HEXA decimal.
Can someone please help me out.

two ways:
1. call FM bapi_po_getdetail and pass the PO number, you will get all your details
2. pass PO number to CRMD_ORDERADM_H to get the the GUID and use this GUID on BBP_PDHGP(if version control is active then you need to consider the active version only)
and for item guid, pass the GUID picked from CRMD_ORDERADM_H to CRMD_ORDERADM_I-HEADER, you will get all the item guids as CRMD_ORDERADM_I.
this can be passed to BBP_PDIGP.
there are beautiful views as well joining these tables(BBP_PDVIEW*).. which you can use as well

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

Please explain on what does these select statements get from these tables..

Hello Experts,
What does these select statements get?and what are these tables CDHDR and CDPOS used for?
The program that I am currently modifying lets users post documents and the ones that are not posted
are saved in a custom table. Now, we had a scenario in PROD server wherein certain items are not being
fetched as bypassed but we saved it in the bypassed table. Anyway, below is the select statements:
get all change document header within the selected dates
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_cdhdr
    FROM cdhdr
   WHERE udate IN s_udate
     AND objectclas EQ 'CHARGE'
     AND tcode IN (lc_tcode_msc1,
                   lc_tcode_msc2,
                   lc_tcode_msc1n,
                   lc_tcode_msc2n,
                   lv_tcode_vl33n,
                   'SE38',
                   'ZGENE').
IF NOT it_cdhdr[] IS INITIAL.
SELECT objectid changenr value_new
      FROM cdpos
      INTO TABLE it_cdpos
      FOR ALL ENTRIES IN it_cdhdr
     WHERE objectclas EQ it_cdhdr-objectclas
       AND objectid   = it_cdhdr-objectid
       AND changenr   = it_cdhdr-changenr
       AND tabname    = lc_tabname_mcha
       AND fname     IN (lc_fname_zustd,'LWEDT').
DELETE it_cdpos WHERE value_new+00(01) = 'X'.
LOOP AT it_cdpos ASSIGNING <fs_cdpos>.
    l_matnr = <fs_cdpos>-objectid+00(18).
    l_charg = <fs_cdpos>-objectid+22(10).
    l_zustd = <fs_cdpos>-value_new+00(01).
    READ TABLE it_batch INTO wa_batch
         WITH KEY matnr = l_matnr
                  charg = l_charg.
    IF sy-subrc EQ 0.
      l_tabix = sy-tabix.
      wa_batch-zustd = l_zustd.
      MODIFY it_batch FROM wa_batch INDEX l_tabix
             TRANSPORTING zustd.
    ELSE.
      wa_batch-matnr = l_matnr.
      wa_batch-charg = l_charg.
      wa_batch-zustd = l_zustd.
      wa_batch-code = 'A'.              "selected within period
      APPEND wa_batch TO it_batch.
    ENDIF.
ENDLOOP.
ENDIF.

Hi,
                        The first select statement is for Change document header.CDHDR table contains this object class in your case if you change any batch number for any material number from the transaction for example (MB01) you can trace this .
From CDPOS you can trace which tables affected (EX : MCHA) and the new value(l_zustd ).
Regds,
Vinsa.R

Which DataSource for 0SRM_TD_CF on SAP ECC side?

hello together,
i want to load the confirmations from ECC into BI.
The Data Source 0SRM_TD_CV would be the correct one but is coming out of SRM and we have to load it from ECC.
Does anyone know which DataSource I have to take on ECC side?
Thanks,
Andreas

Hi,
2LIS_02_CGR extracts data from EKBE, EKES and EKPO. While the DS 2LIS_02_SCN fetches data from EKET ,EKES, EKPO.
Make sure that you have data maintained in all of the above tables.
Regards,
Durgesh.

Creating DATASOURCE on AUSP table in CTBW tcode..

Hi friends,
i have a requirement to create a datasource on AUSP table in CTBW tcode.....
i'm unable to to solve that so, can any one give me the procedure.. how can i create.. a datasorce throgh this CTBW.. ..
actuvally my requirement is i want to create a datasorce on AUSP table even i tryd in RSO2 also..when i'm creating generic datasource.. when i enetered this table means.. it was not accepting this table name..it pose some error..
so, can any one plz suggest me.. helpful answers will be highly appriciated..
regards
Babu

Hi,
well I don't know your view definition, but this message always appears if you are using structures, views, tables which contain fields that refer to other tables. You always have to embed the fields of that tables into your structure. So in your case, creating a view on ausp and t006, you need to add t006-msehi as a view field. Then it should work.
regards
Siggi

How to find reports which are using sales tables

Hi Guys,
we are using OBIEE 10g version.Here i need to identify the the reports which are using sales tables.
Table names are given but how to find which report is using these tables.Is there any method to find
or we have to check all reports manually?
Could any one pls suggest me here!
Regards,
sk
Edited by: 912736 on Jun 8, 2012 1:24 PM

Hi SK,
You can run a report from catalog manager that willl give you all answers requests and the subject area columns in use, you can map these back to the sales tables either manually or by linking (vlookup) to an RPD report that you can run from the Admin tool.
The Usage Tracking method is pretty good but you will have to match up the reports using the Logical SQL.
I'd do both methods and cross ref your results to ensure nothing slips the net.
Regards
Alastair

I want to create generic master data attribute datasource on ANLA table .

hI,
I want to create generic master data attribute datasource on ANLA table .
and have to activate delta load.
Is it possible for delta upload on this table?
if it is possible then on which field i can create genric delta?

1.I want to fetch quantity ,inventory no , serial no.......
I have to enhance that datasource.....
2.else i can create master data for asset number using ANLA
I have opted 2nd option

Is there any standard report which contain all these fields

is there any standard report which contain all these fields
1. plant
2. material no.
3. profit center
4. movement type
5.g l a/c
6.posting date
we have it in z form one of the job it does is that what all materials entries came to a single gl we can know from it
like we can know what all materials were charged to repair to p and m a/c.
can any one tell where can we find these field in any standard format in sap.
pls send some suggestions.

Hello Sanjeev,
I don't think there is an existing standard report with all the information from KE5Z plus material name.
What I would suggest to you is either:
1) Copy the standard KE5Z program (RCOPCA02) to a Z program one and insert the additional field from MAKT table (it would demand ABAP coding and some considerable effort to develop it);
2) Create a Query (SQ01 transaction) by selecting data from GLPCA (table that is used in KE5Z) and MAKT (table that contains the material name by language).
Hope it helps you.
Best Regards,
Daniel.

How to download the data which is in the table?

how to download the data which is in the table?
every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
can any one help me in this.
Phani.
Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AM

One way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
There u can downlaad the data .
The ither way is to use the code
The Following Code will be helpfull to You
Data :ITAB TYPE TRUXS_T_TEXT_DATA,
        FILE TYPE STRING.
         C_ASC     TYPE CHAR10   VALUE 'ASC',
DATA: L_STATUS TYPE C,
       L_MESSAGE TYPE PMST_RAW_MESSAGE,
       L_SUBJECT TYPE SO_OBJ_DES.
DATA: L_FILELENGTH TYPE I.
PERFORM download_to_pc
              TABLES
                 itab
              USING
                 filename
                 c_asc
                 c_x
              CHANGING
                 l_status
                 l_message
                 l_filelength.
FORM DOWNLOAD_TO_PC TABLES   DOWNLOADTAB
                    USING    FILENAME
                             FILETYPE TYPE CHAR10
                             DELIMITED
                    CHANGING STATUS
                             MESSAGE TYPE PMST_RAW_MESSAGE
                             FILELENGTH TYPE I.
DATA: L_FILE TYPE STRING,
        L_SEP.
L_FILE = FILENAME.
IF NOT DELIMITED IS INITIAL.
    L_SEP = 'X'.
ENDIF.
STATUS = 'S'.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      FILENAME                = L_FILE
      FILETYPE                = FILETYPE
      WRITE_FIELD_SEPARATOR   = L_SEP
    IMPORTING
      FILELENGTH              = FILELENGTH
    TABLES
      DATA_TAB                = DOWNLOADTAB
    EXCEPTIONS
      FILE_WRITE_ERROR        = 1
      NO_BATCH                = 2
      GUI_REFUSE_FILETRANSFER = 3
      INVALID_TYPE            = 4
      NO_AUTHORITY            = 5
      UNKNOWN_ERROR           = 6
      HEADER_NOT_ALLOWED      = 7
      SEPARATOR_NOT_ALLOWED   = 8
      FILESIZE_NOT_ALLOWED    = 9
      HEADER_TOO_LONG         = 10
      DP_ERROR_CREATE         = 11
      DP_ERROR_SEND           = 12
      DP_ERROR_WRITE          = 13
      UNKNOWN_DP_ERROR        = 14
      ACCESS_DENIED           = 15
      DP_OUT_OF_MEMORY        = 16
      DISK_FULL               = 17
      DP_TIMEOUT              = 18
      FILE_NOT_FOUND          = 19
      DATAPROVIDER_EXCEPTION = 20
      CONTROL_FLUSH_ERROR     = 21
      OTHERS                  = 22.
IF SY-SUBRC <> 0.
    STATUS = 'E'.
    CASE SY-SUBRC.
      WHEN 1.
        MESSAGE = 'gui_download::file write error'.
      WHEN 2.
        MESSAGE = 'gui_download::no batch'.
      WHEN 3.
        MESSAGE = 'gui_download::gui refuse file transfer'.
      WHEN 4.
        MESSAGE = 'gui_download::invalid type'.
      WHEN 5.
        MESSAGE = 'gui_download::no authority'.
      WHEN 6.
        MESSAGE = 'gui_download::unknown error'.
      WHEN 7.
        MESSAGE = 'gui_download::header not allowed'.
      WHEN 8.
        MESSAGE = 'gui_download::separator not allowed'.
      WHEN 9.
        MESSAGE = 'gui_download::filesize not allowed'.
      WHEN 10.
        MESSAGE = 'gui_download::header too long'.
      WHEN 11.
        MESSAGE = 'gui_download::dp error create'.
      WHEN 12.
        MESSAGE = 'gui_download::dp error send'.
      WHEN 13.
        MESSAGE = 'gui_download::dp error send'.
      WHEN 14.
        MESSAGE = 'gui_download::ubknown dp error'.
      WHEN 15.
        MESSAGE = 'gui_download::access denied'.
      WHEN 16.
        MESSAGE = 'gui_download::dp out of memory'.
      WHEN 17.
        MESSAGE = 'gui_download::disk full'.
      WHEN 18.
        MESSAGE = 'gui_download::dp timeout'.
      WHEN 19.
        MESSAGE = 'gui_download::file not found'.
      WHEN 20.
        MESSAGE = 'gui_download::dataprovider exception'.
      WHEN 21.
        MESSAGE = 'gui_download::control flush error'.
      WHEN 22.
        MESSAGE = 'gui_download::Error'.
    ENDCASE.
ENDIF.
ENDFORM.             "download_to_pc
At The End Reward points.
Please it's Required.
Thanks ,
Rahul

Can we add a new column in report which is not in table.

Hi All,
Can we create a new column in report which is not in table.
I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
Regards
Edited by: User_Apex on May 16, 2011 5:54 AM

Standard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
Then the adding a column in the query would be your best best...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

Which datasources covers these tables :

Similar Messages

Maybe you are looking for