While pulling GL FBL3N standard report

Dear experts,
In standard report FBL3N, while executing with cleared item check box, output is not displaying, but in Open items we are getting open as well as cleared items.
When i go to the Tcode FBL3N im giving the input with GL account XXXXXX and selecting the Open Item it is picking Up all the cleared and open items where business required only Open item
Any customizing is required for the same ?
Pls suggest any solution for the same
Regards,
Vinayaka

Please check the GL account settings.
Please know the difference between symbols of line items
Green Tick - Is normal item (cannot be cleared)
Green bubble - cleared item
Red bubble - open item
Whatever you are seeing is not open item, it seems they are normal items, as you must have maintained with line item display only.

Similar Messages

Difference in GL Balances between two Standard Report fbl3n and fagll03

Hi ,
Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
ENTRY NO. 1
We have posted one MIRO , Accounting Posting is as below : -
PK         Description    Amount
86         GR/IR             1000.00
31         Vendor           -800.00
50          TDS               -200.00
ENTRY NO. 2
We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
PK         Description     Amount
21         Vendor             800.00
40          TDS                 200.00
96          GR/IR            -1000.00
But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way : -
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          -200.00 -
> ?????
*OPEN ITEMS          - 400.00----
> ?????
Although in other Standard report FBL3N , the same are showing correctly as shown below
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          +200.00
*OPEN ITEMS                0.00
PLEASE HELP
Regards
Soumitra Bhattacharya

Hi
FAGLL03 - Display/Change Items (New) - this report is related to ledger reporting purpose. this reports is available after ECC 5.0.
FBL3N - is line item display - this is only GL reports (not in ledger reporting)
if you find any difference is values please check the report variant you are using and ledger you are activated.
hope this will help you.
Regards
Ram

Getting a dump while executing the standard report BUSCHDOC

Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
Ravindra

Hi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu.

UNIQUE PROBLEM WHILE CHANING STANDARD REPORT

Hey guys,
I am adding few coloumns to exsisting ALV GRID(in a standard report which is developed for printing GL account detials of vendors)
But the problem is,the cloumn in position 12,comes again in position 13...
the original report has 12 coloumns,i added 8 more columns..
but the cloumn in 13 has same values as in 12..
why is it happening?how can i corecT?

NAH,
i checked rechecked....
hasnt got to do anythign with structure of FC..
peculiarly,no matter what,the coloumn in 13 gets effected this way...
i.e if i try to hide the coloum creating problem,the coloum which replaced it behaves the same way...
i.e vlaues in coloumn 13 = vlaues in coloumn 12 no matter what.
intrestingly if i change reuse_alv_list_display to grid_display..
this paticular problem doesnt arise...
however i cannot display grid..i ahve to display list..

Standard report for Open Orders & JIT lines

Hi,
I need a standard report that will list out all open Purchase Orders and All Open JIT lines for a Supplier for Perticular plant.
Is there any standard report that can pull this data.
Regards
Sandeep

Use ME2M / ME2N and ME2L reports with selection parameters WE101 and scope of list EINT

Custom field's text not getting displayed in standard report

Hi All,
I have a requirement like this .
There is a Custom field which we have added in a standard FICO report ie S_PL0_86000030 ( G/L Account - Balances ).
The custom field is added through a report painter , while seeing the config of report painter the custom field is showing the selection text , but when we run this transaction S_PL0_86000030 , the technical name of that field appears in the selection screen .
For example if the field is ' matnr' then we give the text as 'Material Number' . Then in the screen this field is getting displayed as Matnr instead of Material Number.
Please suggest me on this.
Thanks,
Sumit

In transaction GRR2
Insert->
selection parameters ->
take the variable type as >Tesxt varaible for selection parameter
chosse >material no.
hope ths helps
Bhanu

Standard Report for Materials Cost Component Structure - PO Condition Type

Dear experts,
We are using below cost component structure (CCS) for materials:
- Direct materials
- import duty
- import handling
In which, all those above CCS are achieved through below condition type in Purchasing Info Record. When doing the standard cost estimate through costing run, we have successfully grouped all those condition types into their respective CCS. The problem is, while executing the standard report of "result of costing run" (S_ALR_87099930), the sytem groups all those three CCS into CCS "Direct materials" only.
I have tried different standard layouts, but still got no way to show all those CCS separately in the standard report.
Please kindly suggest what approach should i take
Thank you very much
BR, Erwin
@edit
Solved.
Edited by: Erwin Hartono on Nov 16, 2011 9:16 AM

Hi
Check cost elements assigned to structure. For this go to transaction code OKTZ and select your CCS and double click on Assignment Cost Component-Cost element interval.
Srinivas

Standard Report for stock Aging

Hello all,
can anyone plz let us know that is there any standard report in SAP for stock aging? actually i have to see the materials quantity whose 311 movement not done after 321 and also from how many days it is pending.
Kindly help and tell how can i find those materials quantity, while user also do 311 for partial quantity?
Regards.

Hi @ABAP@
Check the followings...
MB24 - Reservations for Material
MB25 - Reservations for Account Assignment
MB51 - Material Document List
MB52 - List of Warehouse Stocks on Hand MB53 - Display Plant Stock Availability
MB54 - Consignment Stocks
MB56 - Analyze Batch Where-Used List
MB57 - Build Up Batch Where-Used List
MB58 - Consgmt and Ret. Packag. at Customer
MB59 - Material Document List
MB5B - Stocks for Posting Date
MB5C - Pick-Up List
MB5L - List of Stock Values: Balances
MB5M - ShL.exp/prod.date
MB5S - Display List of GR/IR Balances
MB5W - List of Stock Values
MB9A - Analyze Archived Material Documents
MBAL - Material Documents: Read Archive
MBGR - Display Material Documents by Movement Reason
MBSI - Find Inventory Sampling
MBSM - Display Cancelled Material Documents
MMBE - Stock Overview
MD07 - Current Material Overview
MR51 - Material Line Items
MRKO - Settle Consignment/Pipeline Liabilities
MB5T - Stock in transit CC

Double-click in standard report

Hi,
I'm creating a standard report (not an ALV, just write's...) and I need to control events when I double-click on certain caracters on the screen. How can I do that?
Thanks
Carles

hi,
while genarating secondary list based on uer actions( double click), we provide the logic for genarating list unsder AT LINE-SELECTION event.
AT LINE-SELECTION.
<statements>.
When the user triggers the function code PICK, AT LINE-SELECTION is always triggered if the cursor is positioned on a list line. The function code PICK is, by default, always linked with function key F2 and hence with the mouse double-click.
Example for AT LINE-SELECTION.
REPORT demo_list_at_line_selection.
START-OF-SELECTION.
WRITE 'Basic List'.
AT LINE-SELECTION.
WRITE: 'Secondary List by Line-Selection',
/ 'SY-UCOMM =', sy-ucomm.
When you run the program, the basic list appears with the standard list status. The detail list shows that SY-UCOMM has the value PICK.
To pass individual output fields or additional information from a user selected line to the corresponding processing block during an interactive event, use these statements:
HIDE
The HIDE statement is one of the fundamental statements for interactive reporting. You use the HIDE technique when creating a basic list. It defines the information that can be passed to subsequent detail lists.
READ LINE
Use the statements READ LINE and READ CURRENT LINE to read data from the lines of existing list levels. These statements are closely connected to the HIDE technique.
GET CURSOR
Use the statements GET CURSOR FIELD and GET CURSOR LINE to pass the output field or output line on which the cursor was positioned during the interactive event to the ABAP program.
DESCRIBE LIST
The DESCRIBE LIST statement allows you to read certain list attributes, such as the number of lines or pages, into program variables.
follow this link fro more information.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dba42335c111d1829f0000e829fbfe/content.htm
follow this link for sample programs on interactive reports.
http://www.sap-img.com/abap/a-sample-hide-get-cursor-in-interactive-programming.htm
http://www.erpgenie.com/abap/drill_down_reports.htm
regards,
Ashok reddy

Issue in the standard report - S_ALR_87012357 outcome result

Dear Friends,
I am facing issues in the standard report S_ALR_87012357 "Advance Return on tax Sales/Purchases" where I am trying to pull the tax posting report for the current period.Here I would like to see the tax postings which are done with the custom t code ZFB01L (mass upload of data) which is the replica of FB01L. The issue here I see is, any postings done via custom t code with tax code does not appear in the standard report t code S_ALR_87012357. Please advice whether is there any alternative transaction code or program where in I can get all tax postings similar to this standard report or do we have to create a custom t code to get such report with the help of ABAPer.
Kindly advice.
Regards,
Siri

Dear expert
Example :
In Italy, you are required to register all you customer and vendor invoices about your company's sales and purchase activities within the country, in the European Union, or outside the European Union. According to the legal requirements, you need to create value-added tax (VAT) reports based on your customer and vendor invoices on a monthly basis. Depending on the size of your company, you can create the tax reports on a quarterly basis as well.
You can use the Advance Return for Tax on Sales/Purchases (RFUMSV00) program to create tax reports (tax books) according to VAT types. It enables you to maintain your VAT registers per VAT types. You can create separate input and output tax reports about your sales/purchases activities in the country, in the European Union, or outside the European Union according to VAT types. The program enables you to save your reports with a report number (for example: 1/2008, 2/2008), and it generates a summary per VAT code at the end of the report. The program ensures the correct progressive page numbering of tax reports and calculates the debit and credit balance for the given VAT type. You can carry forward the credit balance to the following month.
SE38 :RFUMSV00 =S_ALR_87012357
PATH
Accounting ® Financial Accounting ® General Ledger ® Reporting ® Tax Reports ® General ® Advance Return for Tax on Sales/Purchases ® Advance Return for Tax on Sales/Purchases.
Under
Set the following indicator(s)
Output control :Read address data
Output lists
Output tax: Line items
Input tax: Line items
Regards
Ajeesh.s

Need help with customizing standard reports in Fusion Applications

Hi,
   I have requirement to customize 'Asset Transfer Report' in Oracle Fusion.
   This report is a BI Publisher report and Data Model lies in folder '/Share Folders/Financials/Fixed Assets/Tracking/Data Model' and report lies in folder '/Share Folders/Financials/Fixed Assets/Tracking'.
    Steps which i have completed
   I am trying to customize this report, i followed the below steps
Step 1:-
   Copied Data Model into '/Shared Folder/Custom/Financials/Fixed Assets/Tracking/Data Model' and report into '/Shared Folder/Custom/Financials/Fixed Assets/Tracking/'
Step 2:-
   Opened task 'Manage Custom Enterprise Scheduler Jobs for Ledger and Related Applications' and created a job with the following details.
Job Definition
Field Name
Value
Display Name
XX Asset Transfers Report
Name
XX_ASSET_TRANSFERS_REPORT
Path
/FA/
Application
Financials Common Module
Description
XX Asset Transfers Report
Job Application Name
FinancialsEss
Enable Submission from Enterprise Manager
Job Type
BIPJobType
Class Name
oracle.xdo.service.client.scheduler.BIPJobExecutable
Default Output Format
Report ID
/Custom/Financials/Fixed Assets/Tracking/Asset Transfers Report.xdo
Priority
Allow Multiple Pending Submissions
False
Enable Submission From Scheduled Processes
Yes
User Properties
Field Name
Value
PDF
.*\.pdf$
jobDefinitionName
FAS430
XML
.*\.xml$
jobPackageName
/oracle/apps/ess/financials/assets/tracking/transfers
EXT_PortletContainerWebModule
Ledger
Since the standard report has the below parameter i have created same set of parameters for the Job which i have created, but i do not know how to assign the list of values to these parameters
Parameter Prompt
Data Type
Page Element
Default Value
Required
Book
String
Text box
Yes
Currency
String
Text box
Yes
Period
String
Text box
Yes
Batch
String
Text box
No
Step 4:-
   Now when i navigate to schedule process, when i click Schedule New Process Button in the list of values i can see the job which i created. When i submit the job is completing with error.
   When i open the xml file, file is blank and no data is available in the file.
   When i open the log file i see the below error
dummy file is deleted
================ BIPJobExecutable Execution Started ============
OutputFile : /u01/APPLTOP/instance/ess/rfd/67068/out/67068.xml
Request ID: 67068 ClassLoader is weblogic.utils.classloaders.GenericClassLoader@1c85c3a finder: weblogic.utils.classloaders.CodeGenClassFinder@1c85cb3 annotation: FinancialsEssApp#V2.0@
RequestId:67068
ReportID : /Custom/Financials/Fixed Assets/Tracking/FLY FA Transfers Report.xdo
Process : BIPDocGen
The bipJobID : 6252
bipJobID is updated to ESSRuntimeService
BIP_STATUS_URL is added to ESSRuntimeService
================ BIPJobExecutable is running in async mode. ============
================ Please check the ess status for more detail info. ============
    Am i doing anything wrong while creating the job?
Note :- I created another test data model and report with 'Select SYSDATE from dual' and am able to see the report completing successfully.
Please kindly help, i am failing to meet my deadlines.
Regards,
Prasad R

Hello Jani Rautiainen,
    Thanks a lot for replying my question.
    This is the first time i am working with the BI Publisher reports and fusion applications.
    My requirement is to add few columns to the standard report with out loosing the functionality.
    I was not aware that there is two ways of doing this, i was always copying data model and report to a new folder and trying to create a new job for the report.
    As mentioned in the document 7.2.1.4 Using the Customize Feature    , i clicked on the more button on my report but i do not see the customize option. Do i need to have any specific role for this to appear in the menu? Please kindly let me know.
    Also i see below limitations while customizing report
Limitations
Following are limitations of the Customize report option:
The Customize option is only available through direct access to the BI Publisher server using the /xmlpserver URL (for example:http://hostname.com:7001/xmlpserver). The Customize option is not available through the /analytics URL used to access Oracle Business Intelligence Enterprise Edition.
The Customize option is available only for reports. The Customize option is not available for data models, style templates, or sub templates.To customize data models, style templates or sub templates and insulate them from potential changes from patching: Make a copy of the data model, style template, or sub-template and either rename it or place it in a custom folder. Ensure that you update any reports to point to the customized data model, style template, or sub template.
    My requirement is to add few additional columns which needs Data Model to be modified, Can i copy the data model to the custom folder and do my modifications and point this data model in the report(as mentioned in the point 2 in the limitations)? In that case, will the original report submission works?
Regards,
Prasad R

Error while logging in to Financial report studio

Hi,
while logging in to Financial report studio i am getting this error
Could not connect to server : Server name
please make sure that the server is running as specified in the logon dialog(including port number if not default)
can any 1 help me in this ??????

for my response i will make the supposition you are trying to connect to an HFM data source to pull data for your reports, lets call it HFMCLUSTER.
in order for your reports studio to gain connectivity to the HFMCLUSTER data source, you will need to first install the HFM Client on the same machine, along with the ADM driver for connectivity. After it is installed, register the HFMCLUSTER using the Server and Web Configuration Utility (the only tab that will be available will be the Server/Cluster Registration)
You then enter the name of one of the servers, or the server, that is being used as the HFM server, the cluster name will then appear. Click the "Enable DCOM" button to the right, hit apply, and you're done.

RUNING STANDARD REPORT ON DEVELOPER

we are using solaris operating system on our server machine, while we are running windows on our client site,
we want to run standard report of Oracle Fixed Assets (Cost Sumary Report).
we had tried to comment that parameters it gives error of REP-1415 and there r number of parameters no need to pass values......also plz mention me can i modify the standred report and the upload that report in oracle financial applications.
Thanks,
sadaf

Oracle has taken extremely good care for us not to be able to run standard reports locally. Only Oracle native consultants can do this, because they have notebooks with special environment.
Yes, we can modify standard reports and upload them, and only after that see if the changes work. However, it's strongly recommended to created custom report first by copying the standard one under another name, and make changes to custom reports only.

Unable to retrieve the list of Standard Reports

Hi,
User needs an aging report in PW90 paper but gets an error message when clicking on to the report tab once logged into SAP portal.
Error message:
Unable to retrieve the list of Standard Reports. Please call the Help Desk to report the problem. Error encountered while connecting to R/3. java.lang.NullPointerException.
I checked the java support in Internet explorer and deleted the cookies and temporary files but he kept having the same issue.
Please Help on this !!
Thanks in advance.

Hi,
Try to restart the portal server.
Regards,

Info Records Per Material Group Standard Report Not Running at All.

Hi Experts,
We had a Small problem Where while Running Info Records Per Material Group(T-code ME1W ) Standard Report the Report is not Showing any output in PRD, where else running Info Records Per Material (T-Code ME1M ) Standard Report the Output is getting Displayed.
Our System is Currently SAP EEC 6.0 & Application Package SAP_APPL is of release 604 & Level 0007, Highest Support Package is SAPKH60407.
is this Issue covered in Some OSS Note?
Thanks & Regards
Priyesh Shah

Hi,
The info-records for the materials which appears in the standard report ME1M/ME1L is different from the one which appear in ME1W.
If you try with the material groups of the ME1L or ME1M info-records it wont be displayed in ME1W.
ME1W will display only the info-records which are created @ material group level.
i.e. try to create a new info-record using ME11 without entering material, in the general data screen you have to enter the material group & other parameters.
Now once you save this info-record,same will appear in ME1W.
Hope its clear.
Thanks & Regards,

While pulling GL FBL3N standard report

Similar Messages

Maybe you are looking for